Used Extrusion lines for monofilaments

HDPE monofilament extruder. Output: 110kg/h (at 80% capacity) Film width max. - min. caliber 18 - caliber 30 Fixed head 360 positions (threads) Screw diam. 100 mm 100 HP Heating zones: 5 on gun + 1 neck + 1 head 3 gravimetric dispensers Filter diam. 190mm Hydraulic cooling ring Calender: Roller width: 920 mm Simple rewinder Number of shafts and diam.: 370 shafts 30mm + 5 baskets Diam. Max. rolls: 170 mm approx. Max. width: 510 mm (cone)

Complete exrtusion line for 3D printers filament Scope of delivery: Extruder, die head, cooling tank, puller, roll station and coiler Available two lines (price per line) 1. EXTRUDER Manufacturer/: Friendmachinery Model SJ35 Year 2016 Material PLA, ABS Screw diameter (mm)35 Screw L/D ratio/ 28/1 Output capacity (kg/h) 8-12 Motor AC Main drive power (kW) 7.5 Running hours 5000 CE certified Machine manuals NO 2. EXTRUDER Manufacturer/: Friendmachinery Model SJ45 Year 2015 Material PLA, ABS Screw diameter (mm)45 Screw L/D ratio/ 30/1 Output capacity (kg/h) 15-20 Motor AC Main drive power (kW) 15 Running hours 5000 CE certified Machine manuals NO

Equipment designed to produce blown film (blow film extrusion) or monofilament from polymer pellets, depending on the type of dies / auxiliary tooling used. A separate tooling - flow rheometer allows the viscosity of the flowing polymer melt to be determined. Consists of: 1. COLLIN E 20 P extruder Serial number: 3200-23-08 Screw diameter: 20 mm, made of nitrided steel L/D: 25 Screw speed: 2-180 rpm Torque: 100 Nm Maximum LDPE output: 3.5 kg/h Hopper: 6 l Cylinder heating zone: 3x1000 W Cylinder cooling zone: 2 fans Loading area with water cooling Variable frequency AC servo motor 2. Bypass rheometer COLLIN WROR-III with melt pump (without extruder) Simultaneous use of 3 capillaries Variable pump speed: 1-30 rpm Pump capacity: 0.66 cc/min. Temperature sensors: PT 1000 Temperature range: 60 - 300°C 3. COLLIN TEACH-LINE monofilament line Module A: Water bath Module B: MDO-AT retention unit Module C: Air-heated oven for monofilament extraction Module D: Haul-off unit MDO-BT with single monofilament winder Water thermostat Monofilament die-head for 4 monofilament Additional die-head for 4 monofilaments with a holes diameter of: 0,3 mm, 0,6 mm, 0,9 mm, 1,2 mm Additional flat die-head 4. COLLIN TEACH-LINE blowing unit and hose head (for sleeve film) 30 mm sleeve head with cooling ring TEACH-LINE Blowing unit TEACH-LINE BL 50 T Sliding table 700x500 mm for BL 50 T 5. TEACH-LINE E 20 T extruder Serial number: 9120-23-08 Hopper capacity: 3.2 l Screw diameter: 20 mm L/D: 25 Small number of working hours. Lifting and turning ventilation unit for removing fume, dust, gases, aerosols and other harmful substances from a local emission source - 3 pcs.

Extrusión line for PA and PET monofilament of 1-6 mm widht Production up to 150 Kg/h Mechanical speed up to 80 mt/min Machine can processs PP, PE up to 80- 90 Kg/h Complete line including twister machine LMR-50 Moretto dryer and gravimetric dosing unit Extrusion model: EX.075.27 Single screw extruder , 75 mm diameter, L/D 32 . The thermoregulation controlled zones are 12 . Each zone is equipped with a fan for cooling . Hopper with cooling circuit . Circulation pump for gear oil with heat exchanger for cooling water-oil . Main motor 40 kw ac controlled by full digit inverter. Adapter between extruder and screen changer with pressure transducer. Manual filter model MFU.075 Gear volumetric pump model: PU.075.40 The pump is driven by a 2.2 Kw a.c motor frequency Die head model H.075 N° 1 metering pumps 50 cc N° 2 kit two outlets conveyor N° 1 kit two outlet die to produce special profile wire First heating tank model HVU.450.035 Quenching tank water with two stainless motorized roller Ø 800 x 200 mm . A.C motor drive 0.55 Kw The temperature is controlled by a controller with constant recirculation of water . The range temperature go to 10° up to 80 ° . Towing back unit model TU.800.020 Stainless motorized roller Ø 800 x 200 mm . Special nip roller in neoprene rubber Ø 200 x 200 mm . Up and down command in panel box . The cylinder is motorized and controlled by PLC program . Powered by an a.c motor 0.55 Kw keyed in axis with a gear reducer Dryer tank model DU.50.035 Completely made of stainless steel . Inside are arranged four-blade air for drying wires . System restoration of reclaimed water Centrifugal fan with 1.1 kW. Slow stretching unit model RG.40.020. The group consists of three cylinders Ø 400 x 200 mm hard chrome plated . Special nip roller in neoprene rubber Ø 200 x 200 mm . All the cylinder are motorized by gear and controlled by PLC program . Powered by an a.c motor 1.1 Kw keyed in axis with a gear reducer Stretching oven model H.500.020. Steel frame fully insulated and suitable for operating up to 300 ° . 5000 mm longer . Heating chamber with forced ventilation and adjustable. Heating power of 12 Kw. Power of 1.1 kW fan motor Fast stretching roller model TU.060.020 one cylinders Ø 600 x 200 mm hard chrome plated . Special nip roller in neoprene rubber Ø 200 x 200 mm . AC motor drive 2,2 Kw Embossing unit model : “ EU.015.020. Bridge structure made of forged steel. The cylinders aren’t motorized and have a shallow incision which corresponds to the average diameter of the wire. The upper cylinder is moved by hydraulic cylinders. The adjustment of the penetration is manual. Embossing cylinders made of steel hardened to 60 HRC Fast stretching unit model : “ RG.040.020 “ The group consists of four cylinders Ø 400 x 200 mm hard chrome plated . Two special nip roller in neoprene rubber Ø 200 x 200 mm . All the cylinder are motorized by gear and controlled by PLC program . Powered by an a.c motor 3 Kw Over flow tank model CV.400.025 Completely made of stainless steel . Owner flow stabilization tank with cold water . 4000 mm longer . The temperature is controlled by a controller with constant recirculation of water . The range temperature go to 10° up to 20 ° Winder machine model PWF.1000 Very resistant structure suitable for the production of reels with DIN 355 standard soppot Automatic tensioning system with dancer arm with pneumatic adjustment, from 200 to 2000 N. Motor 2.2 kW frequency controlled. Pre-selectable meter counter and stop, optional, to the achievement of the set size. Twister machine LMR-50 Rotation up to 2300 g/min Optional: Packaging and rewinder machine availables

Monofilament manufacturing line for 3D printer, production of 30Kg/Hour, composed of : A- Single screw extruder 45mm 25D. Bandera brand with 10 hp motor, with speed variator. B- Dehumidifier with hopper and machine loader. C- Head for 1,75 to 3 mm (2,85). D- 2 tempered bathtubs of 2 meters each one with electric resistances and central temperature. E- 2 meter water immersion cooling bath. F- Thickness gauge, Lafer brand. G- Stretching of 2 rollers. H- Coiler for 80 Kg. I- Machine for unwinding and manufacturing of monoprint reels for printers from 750 grams to 3000 grams. J- Retraction of the reels for printers.