Used Measuring & Control Equipment

ForceBoard with RigidFrame & i-Motor Customer bought it to measure the slip level from supplier, but never used. (brand new) ForceBoard™ MultiSystem allows you to test objects horizontally and vertically. Widest range of testing applications for a desktop force measurement system. The included and programmable i-Motor can easily be mounted both vertically (as seen in the picture) as well as horizontally (for example to test statis/dynamic friction or scratch). ForceBoard Analyzer included. Areas of Use : ​ - Static friction - Dynamic friction - Reciprocating friction - Tensile - Compression - Fatigue (to a pre-set sample displacement) - Fatigue (to a pre-set maximum force) - Linear wear - Scratch - Adhesion ​ With the ForceBoard system you can easily adjust the stroke length and speed via the included software for an unlimited number of automated test cycles.

LABORATORY EQUIPMENT (may be purchased separately) A) Lloyd's LR150K PLUS Tensile Testing Machine 2011 B) SPECTROTEST TXC25 Mobile Spectrometer for Metal Analysis from SPECTRO 2011 C) Charpy 300J - PIC-300 impact pendulum purchased from Metrotec in 2011. CHARACTERISTICS A) Tensile machine: Maximum force (tension and compression): 150 kN (33,721 lbf) General force range using Interchangeable load cells: 0.1 N - 150 kN (0.02 - 33,721 lbf) Force measurement system: exceeds the requirements of BS EN ISO 7500-1: 1999 - Class 0.5 ASTM E4, DIN 1221 Force measurement accuracy: better than 0.5%. Crosshead speed range at full load: 0.001 - 254 mm / min (0.0004 - 10 in / min) Crosshead speed accuracy: ± 0.2% at steady state at 100 mm/min and above. Reduced at lower speed, but better than 1% at 0.5 mm / min. Maximum working width between columns: 620 mm (24.4 in) Crosshead vertical travel: 1050 mm (41.34 in.) Crosshead position accuracy: <0.1 mm (<0.1 mm) Internal extension resolution: <0.5 microns (<0.5 mm) External extensometer connection. (Using Lloyd Instruments interface connector): Analogue (± 10 V) or spot meter. Digital encoders (single or double differential). Data output for computer / serial printer: RS 232 Supply voltage: 230 V a.c. ± 10% 50-60 Hz (fuse T5AH250 V) 115 V a.c. ± 10% ± 10% 50-60 Hz (fuse T10AH250V) Power consumption: <1000 VA Main frame dimensions Height 2508 mm (98.74 inches) Depth 733 mm (28.86 in.) Width 1204 mm (47.4 inches) Mass (without handles and load cell installed): 150 kg (330 lb) Temperature Operating: 40ºF to 95ºF (5 to 35ºC) Storage: -4ºF to 130ºF (-20 to 55ºC) Ventilation Requirements: Unrestricted air flow to side vents Humidity: 5 to 85% RH (non-condensing) B) Spectrometer: Electrical connection: 100 - 240V, ±10%, 50/60Hz (acc. to DIN EN 61010-1) Power during test process: 400 W Power in stand-by mode: 100 W Fuse protection - power supply line: 16 A (slow blow) Storage conditions: -20 - 50ºC; -5 -120ºF Temperature range: 5 - 40ºC; 40 -105ºF (according to DIN EN 61010-1) Air humidity: max. 80% (acc. to DIN EN 61010-1) Argon connection Inlet pressure: 5 bar ±10%; 72 psi Quality: ≥ 4.8 (99.998%) Consumption - standard probe: Constant flow: 15 l/h Analytical flow: 120 l/h Flushing (Flush): 120 l/h Consumption - UV probe: Constant flow: 15 l/h plus 10 l/h UV optical system Analytical flow: 120 l/h Flushing: 185 l/h Protection class: IP 23 (DIN 40050) Height: 640 mm (25,2") Width: 425 mm (16.7") Depth: 250 mm (9.8") Weight: 29 kg (63.9 lbs) C) Charpy Pendulum: Capacity or Impact Energy: 300 J Impact Velocity: 5.42 m/s (5.42 m/s) Readout Type: Digital (PT-DUR Processor) Scales: 300-303 J ± 151-153 Reading resolution: 0.3 J /0.2°. Standards used: EN 10045, ASTM E23 Drive -Lift: Motorised -Brake: Drum, foot pedal operated Accessories included: -Impact blade (fitted) -Blade and support centring tester. Tongs for placing specimen between supports. -Integral transparent polycarbonate protection. Dimensions -Base: 860 × 660 mm -Height: 1250 mm (with hammer at rest). 2000 mm (with the hub in the upright position). 2150 mm (with guard). Weight of the hammer: 20.4 kg approx. (200 N) Weight (machine): 400 kg

Laboratory equipment for quality control and tests standards for the production of polyethylene pipes All devices are produced 2007-2008 and working from the end of 2008 (factory with less than 20.000 h worked) 3. Device for determining the moisture SARTORIUS Germany 4. Piknometer for determining the density ISOLAB Germany 5. Bathtubs – for 20º C and 80ºC with Device for determining the internal pressure ATSFAAR- Italy 6. Device for determining melt index MFI ATSFAAR- Italy 7. Dynamometer-determining tensile strength ATSFAAR- Italy 8. Device for determining OIT METTLER TOLEDO- Italy 9. Laboratory oven for conditioning the samples ATSFAAR- Italy 10. Device for determining the internal stresses ATSFAAR- Italy 11. Device for determining the internal pressure /stores the information on removable media/ ATSFAAR- Italy 12. Electronic caliper MIB - Germany 13. Electronic caliper DGT- Italy 14. Electronic calliper Mitutoyo - Japan 15. Micrometer Germany 16. Dinamometer Germany

Leak tester machine Producer: Seiler Components: Adixen Controls: Siemens Year of production: 2008 Tubes diameters range: from 4,5 mm untill 38,5 mm Available tools: 14,5; 17,5; 18,5; 22,5; 25,5; 28,5; 32,5; 38,5.

-2 IPT pressure tanks 8RT for HDPE pipe testing with tooling for 12-16-20-25-32-40-5-63-75-90-110-125 mm diameter (3 seals) and 160 mm diameter (2 seals) -Mini Chiller IPT type RK/W 2000 L As new, never used in production runs (just tests). Included in the scope of delivery (see pictures).