Stretch blow moulding machines. Terekas- FB2-3 PET Reheat - 2020 Cavities- 1-3 Output- 3,400 bottles per hour Preferential heating Includes: -Preform dumper – Preform hopper elevator – Preform feed rails – Change parts for 24 mm 410 and 28 mm 410 neck finishes – Airveyor ta...
2020 | 300044160 | TEREKAS
More information
Stretch blow moulding machines. Serac blow molding machine- SBL SL7/8 - 2020 Neck 38 7 cavities Output 10.500 u/h Still installed and can be seen with material. In excellent condition and used for trials only...
2020 | 300044739 | SERAC
More information
Stretch blow moulding machines. Straight Line Blow Molding Machine. 80% New. Machine was built on end of 2018. Fully functional. The rotary blow molding machine is a combination of the latest German technology with our superior design and manufacturing capacity. This machine co...
2018 | 300042177 | STRAIGHT LINE BLOW MOLDER
More information
Stretch blow moulding machines. Blow molder- Pet Technologies APF 3002- 2018 2 cavities with 4 heaint bank- Linear Includes air-recovery and VPNaccess set up for PCO 28 finish Includes: - 6 different drinkwared product molds 8oz, 12oz, 16oz cups - Can also blow regular bottl...
2018 | 300043340 | PET TECHNOLOGIES
More information
Injection stretch blow moulding machines for PET bottles. Nissei ASB 150 DPW injection stretch blow moulding machine The system included: - Nissei ASB 150 DPW - One complete Japan ASB mould of 20 cavity for jar 52 mm neck, 18 gr weight plus 3 extra blow moulds for different design - One jar cap mould of 28 ...
2018 | 300043679 | NISSEI ASB
More information
Stretch blow moulding machines. Lanfranchi LG2 - Blow molder for pet 1 gallon/38mm neck @ 1900 BPH. 1 liter,,2 liter,3 liters or 5liter can be run on this machine. Working hours are 44k. Included: -preform loading system i -preform dumping -conveying system -robotic bottle ...
2018 | 300046348 | LANFRANCHI
More information
Injection stretch blow moulding machines for PET bottles. Nissei ASB 150 DPW injection stretch blow moulding machine The system included: - Nissei ASB 150 DPW - One complete Japan ASB mould of 14 cavity for jar 70 mm neck, 30 gr weight plus 1 extra blow mould for different design - One jar cap mould hot run...
2017 | 300043680 | NISSEI ASB
More information
Stretch blow moulding machines. Terekas Flex Blow 4- 2016 6,000 B/H 28m neck PCO 1810 4 cavaties Blowing 2 liter container at the moment 2 sets of molds for 1l and 2l Includes: Hopper, feeder For an extra cost- complete line with conveyoring and bottle palletizer Can't be seen i...
2016 | 300038310 | TEREKAS
More information
Stretch blow moulding machines. 1Blow 4 cavity blow molder 2016 This is a 4 cavity linear stretch blow molder. This machine can handle both 28mm and 38mm finish. Machine comes with -Blow molder -Preform dumper -Preform hopper and conveyor -Preform unscrambler -Change parts for...
2016 | 300046115 | 1BLOW
More information
Injection stretch blow moulding machines for PET bottles. Injection stretch blow moulding machine Nissei ASB PF 24-8 from 2016 Capacity 2300 bph 2L Includes: 1) Dryrier New Omap from 2017 Type: Dehumidifier MDSHT + Hopper for raw material 1000 2) Mould for PET bottle 2L Technical documentation for a...
2016 | 300046144 | NISSEI ASB
More information
Stretch blow moulding machines. Blower SMF STRATOS 10E from 2016 for 3-10L bottles Includes: 1. SMF STRATOS 10E blower with a set of molds for one format 2. Preform feeder 3. Bottle receiver 4. Power Wizard - automatic temperature control system 5. Air recuperation system 6. Pref...
2016 | 300046349 | SMF
More information
Stretch blow moulding machines. Sipa SFL 43/ XL WM linear blow molding machine for jars Year of manufacture: 2015 With preform hopper and unscrambler 3 cavities and can be used for a wide range of jars Hardly used, very few hours In excellent condition and available immediatel...
2015 | 300042342 | SIPA
More information
Stretch blow moulding machines. Side TMS 2004e reheat stretch blow molder, year 2014 Output: 5.600 bph Short neck PCO 1881 Includes: - Mould PCO 1881 - Dryer - Dehumidifier - Chiller - Hopper - Dumper - Preform loader - Spare parts - Technical documents It is currently dismant...
2014 | 300045922 | SIDE
More information
Stretch blow moulding machines. Sidel Synergy PET Strech blow molding machine Including: Blow molding machine 2 cavities 1 Bin 1 unscrambler 1 Electrical Cabinet 1 pair of Mold Available immediatly...
2013 | 300044869 | SIDEL
More information
Stretch blow moulding machines. Used ARCOR Multiblow-02 Details Blower Technical Parameters: Made in Germany – 2013 EC conformity certificate Cavity-04 Productivity based on 1L- Max 6000 bh Connection Parameters: Electrical Parameters: · Power supply: 3 phase+ ground + Neut...
2013 | 300045942 | ARCOR
More information
Stretch blow moulding machines. Blow molder Sacmi SBF 408 - 2012 8 cavities production 21,600 b/h running with 500ml Availble in April Includes: hopper, chiller, feeder and molds for 500ml ...
2012 | 300039706 | SACMI
More information
Stretch blow moulding machines. Stretch blow molding machine SMF HS 3000 2 cavities total production december 2021 : around 5 milions of bottles Production: 1,0lt > 2.500 bph - 2,5lt > 1700 bph machine installed and in working condition ...
2011 | 300043669 | SMF
More information
Injection stretch blow moulding machines for PET bottles. Machine in excellent conditions Hours in production: 67.568 It has been maintened by Nissei a few months ago Availabe Palletizer Hergoplas in production at extra price ...
2010 | 300043774 | NISSEI ASB
More information
Injection stretch blow moulding machines for PET bottles. Machine in excellent conditions but requires investment of 15.000€ by NISSEI It has been maintened by Nissei a few months ago Hours in production: 24.096 Included Palletizer Hergoplas in production...
2010 | 300043788 | NISSEI ASB
More information
Stretch blow moulding machines. Side-TMS 1002e Year: 2010 Number of cavities: 2 Available from October 2023 Technical handbook available Possibility to add conveyor, bagging machine, preform loader and leak tester...
2010 | 300046065 | SIDE
More information
Stretch blow moulding machines. Used Stretch blow moulding machine Brand: SMI Model: SR 10 Year: 2010 Neck: 28mm for still and sparkling water Production: 15.000 bph machine installed but not in working condition since december 2022...
2010 | 300045138 | SMI
More information
Stretch blow moulding machines. KHS InnoPET Blomax 18 S Consrtuction year 2010 Capacity 36.000 Fl/h – 330 ml Counter number of bottles produced : 11.668.802 Including: Preform silo Preform feeding and alignment If required the air transport Krones approx. 120 m with adjustab...
2010 | 300046489 | KHS
More information
Stretch blow moulding machines. Blow molding machine SMF Combi 400 Neck: 30/23 Formats: 1.5 lt it includes: - bottles uncramble SMF SB 10.000 - chiller HT 6A machine stopped but it is possible to be tested running ...
2009 | 300046164 | SMF
More information
Stretch blow moulding machines. Used Blow molding machine Kosme Model: KSB 4000 Neck: D 38 mm/PCO 28 mm the machine will be dismantled the 27th of March 2024 ...
2009 | 300046723 | KOSME
More information
Stretch blow moulding machines. Nissei ASB HSB-10 Hot Fill Stretch Blow Molding Machine Working Hours 20,817 Type of Neck 28 MM Type of Mould available 350 ML Number of cavity of blowing ...
2008 | 300041450 | NISSEI ASB
More information
Stretch blow moulding machines. NISSEI ASB BLOWER NB 40 SC Manufacturing year: 2008 Max Bottles size 4 Cavs 1.5L Type of neck 28 Capacity 3600 BPH Working hours 22,000 Includes technical documentation ...
2008 | 300041526 | NISSEI ASB
More information
Injection stretch blow moulding machines for PET bottles. Nissei ASB 70 DPW injection stretch blow moulding machine The system included: - Nissei ASB 70 DPW - Conveyor - Resin Dryer, Fenco - Hopper working hours 87.000 approx The machine has been stopped in April 2023 ...
2008 | 300045426 | NISSEI ASB
More information
Stretch blow moulding machines. Sidel SBO 4 Compact blowing machine, year 2007 (with high-pressure compressor) Output: 6.400 bph (for 0,5l) / 6.200 bph (for 1,5l) It includes: - Bellis &Morcom compressor, VH9H3N (year 2008), 580 m3/h, 985 rpm, 110 kW - TEFA chiller, Platinium 370...
2007 | 300036501 | SIDEL
More information
Stretch blow moulding machines. Side-TMS 2004e Year 2007 - Machine is working - Technical handbook available Neck: 40mm for detergent and cosmetic bottles ...
2007 | 300046476 | SIDE
More information
Stretch blow moulding machines. Krones Contiform S14 stretch blowing machine Output: 21.000 bph for CSD, 25.200 bph for non-CSD Hours worked: 44.872 It includes: - MDK preform auto loader, from 2006 - Aicool XB 2,5 P - WT chiller, from 2014 - Air conveyor (50m) from 2006 - Belli...
2006 | 300037132 | KRONES
More information
Stretch blow moulding machines. Stretch blowing machine SB 8010 model LB 4* 3 YoM 2006 Capacity 7000 b/h PCO 1881 The machine is dismantled, can be inspected in dry cycle and available immediately. Video is also available....
2006 | 300041678 | LONZA
More information
Injection stretch blow moulding machines for PET bottles. Used Nissei ASB PF8-4B V3 Injection Stretch Blow moulding machine NO Molds available Dryer and plastic dehumidifier included Working hours: 86.500 approx Machine has been stopped in April 2023 ...
2006 | 300045429 | NISSEI ASB
More information
Injection stretch blow moulding machines for PET bottles. NISSEI ABS 70DPW Year 2006 Working hours 18.000 approx Auxliaries - Dryer Piovan - Dehumidifier Piovan - Pump - Hopper - Metal Mezanine Machine in working conditions till the 19th of January 2024, now in dry cycle ...
2006 | 300040564 | NISSEI ASB
More information
Stretch blow moulding machines. Side-TMS 1002e - Cavities 2 - Technical Handbook not available - Machine not in production - Some missing parts to make it work to be defined - Neck: 40mm for detergents ...
2006 | 300046069 | SIDE
More information
Stretch blow moulding machines. Used stretch blow molding machine for big bottles Brand: SMI Model: SR 4 HC Year: 2006 Production rate: 29/21 3.900 bph 48 2.900 bph Mold available after a negotiation formats 1lt and 5lt Neck formats: 48mm and 29/21 (at extra price) Working...
2006 | 300046424 | SMI
More information
Stretch blow moulding machines. Used stretch blow molding machine Sidel SBO 8/10 Universal Production: 16000 bph Neck: Milk Ovens: 10 Mandrels: 200 Grippers: 4-4 Direction: Anti-clockwise PLC Siemens Machine Guarantee by the seller ...
2006 | 300046516 | SIDEL
More information
Stretch blow moulding machines. blower Sipa SF 12/8: - Format of the neck: 30/25 and 29/25 - Format of the bottle: 0,5L, 1,0L and 1,5L. - Working hours: 13.000h machine disconnected it includes a second Sipa machine for spare parts ...
2006 | 300041070 | SIPA
More information
Stretch blow moulding machines. Kosme KSB 4L linear stretch-blow moulder, year 2005 4 cavities, max output: 6.800 bph Container sizes: from 0.1l to 3l Energy efficient, with a modular oven. Quick semi-automatic mould change. Air recycling: a lower-capacity compressor is sufficient....
2005 | 300035541 | KOSME
More information
Stretch blow moulding machines. Blow molding machine Krones Contiform S-12 from 2005 • The oven has 11 lamp stations that in turn each control 9 lamps for distribution depending on the blowing format in which it works. • The opening and closing of the lock is by means of cams, it ...
2005 | 300041064 | KRONES
More information
Stretch blow moulding machines. Blowing machine SIPA SFR8 from 2005 Capacity 16000 b/h Bottle size 0,25L...3L Molds 0,5L and 1L are included Chiller is included Neck type PCO 1810, 28mm The machine is dismantled and avilable immediately....
2005 | 300042255 | SIPA
More information
Stretch blow moulding machines. - Blow molder Sidel SBO 6 Series 2+ - Year 2005 - Machine stopped in 2021 - Production: 9.600 bph with format 1.5lt - Caterpillar Oven ...
2005 | 300043404 | SIDEL
More information
Stretch blow moulding machines. SIPA 16 Cavity PET Reheat Stretch Blow Molder, model SFR 16, year 2004 Output: 400 bpm (at 91% efficiency) Format: 500 ml PET water bottles Preforms: 8.5 gram preforms with 26/22 mm neck finish Includes: - chilling unit - preform dumper - feeder &...
2004 | 300038051 | SIPA
More information
Stretch blow moulding machines. Used Siapi blower EAS 50.115/7 Two neck formats: PCO 1810 and 29/21 Oil Maximum diameter of the bottle: 106mm Maximum height of the bottle: 350 Air flow: 650 Nm3/h machine dismantled and stored in a container. machine has been dismantled in Janua...
2004 | 300042525 | SIAPI
More information
Stretch blow moulding machines. Blow moulding machine Siapi EASP 20/200 Capacity: 2.500 bph x 2 l No tools offered Complete machine - switched off 3 years ago Compressor Tempo Tehnika 350, 2004 (made in Serbia) Speed: 1100 rpm, Power: 75 kW, Pressure: 42 bar Air dryer: Boge du...
2004 | 300043262 | SIAPI
More information
Injection stretch blow moulding machines for PET bottles. Used injection moulding machine for PET bottles Nissei ASB 70 DPH V3 Year: 2004 Working hours: 24.300 Dust extraction: Dega Chiller: MTA Air Booster: Blitz machine in working condition ...
2004 | 300044870 | NISSEI ASB
More information
Stretch blow moulding machines. Used Stretch blow moulding machine Brand: Sidel Model: SBO 8 Series 2 Neck: 29/25 and PCO 1881 Oven: Caterpillar Working Hours: 20.000 Proform dumper included machine running and available in the middle of january available immediately ...
2004 | 300046359 | SIDEL
More information
Stretch blow moulding machines. Side TMS 2004e stretch blowing machine Bottle size: 250ml - 2.500ml Max diam: 110mm Max height: 350mm It includes: - Preform hopper - Elevator - Chiller for cooling machine / mold...
2003 | 300034164 | SIDE
More information
Stretch blow moulding machines. Bottle size: 250ml to 2,500ml Max diameter: 110mm Max height: 350mm It's currently set for 30/25 but the interchange parts for 1810 are available and included. It includes: - Preform hopper and elevator - Chiller for cooling machine / mold: Tae Evo...
2003 | 300034161 | KOSME
More information
Stretch blow moulding machines. Blow molding machine Krones Contiform S-10 from 2003 Dismantled, in very good condition and available immediately! ...
2003 | 300040034 | KRONES
More information
Stretch blow moulding machines. Side-TMS 2001-M Year 2010 Cavities: 2 Technical Handbook available Neck 28/400 and Neck 28/410 Volume: from 2lt to 8lt machine is not running but it works properly...
2003 | 300046068 | SIDE
More information
Injection stretch blow moulding machines for PET bottles. Aoki SBIII-250LL-50S from 2003 The # cavities depends on the container body dimensions and fluid capacity. The number of cavities range from 10 cavities down to 1 cavity depending on these parameters. Screw diameter- 54mm Injection capacity- 386 cm...
2003 | 300046097 | AOKI
More information
Stretch blow moulding machines. KHS Blomax 6 PH, year 2003. Was producing glass cleaner (Clin) with it, small Neck capacity 3.500 bottles / hour Working hours 52.000 h Boxkipper and preform alignment included Hopper included Stretch rod included Very good mantained, can be in...
2003 | 300045884 | KHS
More information
Stretch blow moulding machines. Blower ADS type 62 GD05 construction year 2003 including preform loading hopper 2018 Locking system renewed Bottle sizes - PCO28 - 28/410 - 29/21 - 38mm 2-start / 3-start Available 38mm 2S und 28/410. Working hours 60.000 Can be inspected imm...
2003 | 300046525 | ADS
More information
Stretch blow moulding machines. Blow molder Sidel SBO 14 Series 2 HR Speed: 18,000 bph Year: 2003 Auxiliaries: - Preform Dumper - Complete infeeding system - Vulcaterm Heat resistence Machine available Immediately!...
2003 | 300046712 | SIDEL
More information
Stretch blow moulding machines. BLOWMOULDER SIDE BARCELONA Manufacturer: SIDE, Spain Year of production: 2002 Capacity: 2.000 bph x 6,0 l PET Mould:6 and 8,5 l with 2 cavities Machine with hopper working hours 15.000 The machine is configure to produce 6 and 8.5 lt bottles. nec...
2002 | 300037968 | SIDE
More information
Stretch blow moulding machines. KOSME KSB4000 from 2002. Capacity : 4000 bph. Neck 28 mm PCO 1881 For bottles 0.33-1.5L The offer includes bunker and preform orientator. Machine is available and can be inspected immediately....
2002 | 300043489 | KOSME
More information
Injection stretch blow moulding machines for PET bottles. Nissei ASB 70 DPW injection stretch blow moulding machine The system included: - Nissei ASB 70 DPW - Conveyor - Resin Dryer, - Hopper working hours: 170.000 approx. The machine has been stopped in April 2023 ...
2002 | 300045431 | NISSEI ASB
More information
Stretch blow moulding machines. Used blow moulder Krones Contiform 6 from 2001, first generation Neck: PCO 1881 It includes: - Hopper - Elevator - Uncramble - Feeder - Mould chiller KLB S45 machine in working condition till September 2022...
2001 | 300043958 | KRONES
More information
Stretch blow moulding machines. AMSLER WAE L22 blow molder 2 cavities 1.100-1.200 bph Filling 1 ltrs pet bottles Includes Automatic preform loader but no dumper Available Feb - March 2022...
2001 | 300042208 | AMSLER EQUIPMENT INC
More information
Injection stretch blow moulding machines for PET bottles. Aoki SBIII-250-50 - 2001 The # cavities depends on the container body dimensions and fluid capacity. The number of cavities range from 10 cavities down to 1 cavity depending on these parameters. This information is available via Aoki technical spe...
2001 | 300046107 | AOKI
More information
Injection stretch blow moulding machines for PET bottles. Injectin stretch PET blow molder Automa NSB 20 Year: 2000 Working hours 40.000 approx Cavities 4 Preform 43g with neck 28mm Volume 1lt Pitch 110mm Hopper Moretto DP 304 HC Dehumifier Moretto Mold Chiller: Frigel RC 6...
2000 | 300037880 | AUTOMA
More information
Stretch blow moulding machines. PET blow molding machine Sidel SBO8-series2 Formats: 0,5, 1l, 1,5l and 2l bottles Neck 38mm Preform feeding system The current condition is that some parts had been removed but can be reinstalled (ex. Preform oven chain, air rotary union etc) Wo...
2000 | 300040746 | SIDEL
More information
Stretch blow moulding machines. Used blow moulding system SIDEL SBO 14 Series S2 Construction year 2000 Current capacity: 19,600 bph in 600 ml CC 14,000 bph in 3.0 L CC Number of moulds: 14 Moulds included : No Moulds quick change? Yes Formats produced: 600 ml to 3 ...
2000 | 300046329 | SIDEL
More information
Injection stretch blow moulding machines for PET bottles. Nissei ASB PF4-1B Only 3.900 running hours Auxiliaries included: Piovan DSB 520HE Dehumidifying resin dryer and hopper Moulds included for 5L square and round shape, with container handle, 90 grams In production and available inmediatly...
1999 | 300042603 | NISSEI ASB
More information
Stretch blow moulding machines. Used Stretch blow moulding machine Brand: Sidel Model: SBO 8 Series 2 Neck: PCO 1810 Oven: Caterpillar Proform dumper included machine installed but not running available immediately ...
1999 | 300045746 | SIDEL
More information
Stretch blow moulding machines. KHS Blomax 6 - 1998 Neck is 1810 120 bpm for 500 ml Included: -Tipper -unscrambler -pform track - mold chiller -molds for 500ml and 1.5l...
1998 | 300044316 | KHS
More information
Stretch blow moulding machines. Blowing machine SIDEL SBO 6 Series 1 from 1996 Capacity 6000 b/h Neck type 1881, 28mm The machine is dismantled and available immediately...
1996 | 300041994 | SIDEL
More information
Stretch blow moulding machines. Blowing machine Sidel SBO 4/4 from 1995 Output 4400 b/h PCO 1881 Bottle size 0,25-2L The offer is included: loading hopper, preform feed conveyor, orientator, mold cooler, chiller The machine is still in production and available immediately....
1995 | 300042545 | SIDEL
More information
Stretch blow moulding machines. BLOW MOLDING MACHINE SIDEL SBO 6/10 Brand: SIDEL Model: SBO 6/10 Series 1 Year: 1995 Mechanical Speed: 7200 BPH Change Part: 3025 & 2925 neck finish personalization kits Installed Power: 220KW Auxiliary Equipment: - Preform loader, hopper and Unsc...
1995 | 300043461 | SIDEL
More information
Stretch blow moulding machines. Used blow molding machine Sidel SBO 10/10 Series 1 Year: 1994 machine in working conditions till december 2023 ...
1994 | 300046244 | SIDEL
More information
Injection stretch blow moulding machines for PET bottles. used Nissei ASB 650 NH it includes hopper and dryer The machine was producing jars The machine has been completely refurbished in 2014 The machine has been disconnected recently...
1985 | 300045723 | NISSEI ASB
More information
Injection stretch blow moulding machines for PET bottles. Injection Stretch blow moulding machine Aoki AL-250-50S The machine is almost brand new. It was produced in 2021 February and installed in 2021 July The machine includes : - AL-250-50S ISBM machine - Wittmann Dry MAX E60 PET dryer (2013) The m...
2021 | 300044686 | AOKI
More information
Stretch blow moulding machines. 2 cavities stretch blow molding machine Brand: 1Blow (old ADS) from France Model: 2XL SG Capacity: Max diameter 225mm Max height 405mm Max neck 53mm Preforms neck 20 to 53mm and includes 38mm kit Bottles 500ml 4000bhp Bottles 1.5 3000bph Bottles 5...
2021 | 300045163 | 1BLOW
More information
Injection stretch blow moulding machines for PET bottles. Nissei ASB 70 DPH V4 stretch injection blow moulding machine With zero cooling Included: Resin dryer and chiller Almost brand new machine, only with test run! ...
2021 | 300046214 | NISSEI ASB
More information
Stretch blow moulding machines. Wide mouth blow molding machine. Cav: 1 Neck: up to 130mm. Current feetings: 120mm Capacity: up to 12L. Output: 400bph Feeding: Conveyor Working hours: Less than 1.000hours (used for tests) For protein pots or similar Blow molds available: 4, 6, 8...
2015 | 300042366 | CHUM POWER
More information
Injection stretch blow moulding machines for PET bottles. Used Nissei PF6 from year 2014 Offer includes: Machine with vibration pads Chiller 10TR with high pressure Grundfos pump Motan dehumidifier dryer, with 450L aluminium alloy bin Color doser, make Conair with Housing One complete mold set: 46mm A...
2014 | 300045662 | NISSEI ASB
More information
Injection stretch blow moulding machines for PET bottles. Used Nissei PF6 from year 2014 Offer includes: Machine with vibration pads 2 complete mold set: 46mm Agro Chem mold 35g for 500ml Agro bottle and 29g res for 250ml Agro bottle 55g for 750ml and 1000ml Agro bottle, plus change parts for 66g 1...
2014 | 300045791 | NISSEI ASB
More information
Stretch blow moulding machines. Blow moulder Siapi EA2S/5 from year 2011 5 Cavities Volume of the bottle from 2lt to 20lt Mould included: 3 and 5lt Mold Pitch: 400mm Maximum bottle diameter: 320mm Maximum bottle height: 565mm Maximum neck diameter: 75mm Maximum Nominal output...
2011 | 300043232 | SIAPI
More information
Stretch blow moulding machines. Sidel SBO 8 Universal HR stretch blow moulding machine Suitable for hot fill products and CSD Included empty bottle packer and AF high pressure compressor and air conveyors Capacity: 11.500 bph for 300 ml CSD bottle 16 gr Working hours: 44.000 I...
2011 | 300046066 | SIDEL
More information
Stretch blow moulding machines. SIDEL BLOWING MACHINE SBO 10 Universal HR Year 2010 Mechanicall Speed 18000bph Preform Hot Fill 28mm (22.5 gr, 27.6 gr, 28gr) Auxiliary Equipment: - Dumper DP-2 2010 3.5 kW,P150 bar, CU500 - IPC 201 SIDEL Chiller 2010 Max Pressure 27 bar, Max...
2010 | 300043857 | SIDEL
More information
Stretch blow moulding machines. The machine has air recovery system Installed in 2008 Currently working with 0,5 l PET bottle for still water It can blow 200 cc-2,5 l PET bottles. It needs only 25 bar air pressure, therefore the electricity consume is very low The machine can be ea...
2010 | 300030865 | SMF
More information
Injection stretch blow moulding machines for PET bottles. Nissei PF6 2B from year 2009 Includes dehumidifier and dryer hopper Chiller 10TR capacity Includes 2 Agro chemical molds Worked hours approx 100.000 In good condition, available immediately and can be seen in production! ...
2009 | 300045827 | NISSEI ASB
More information
Stretch blow moulding machines. Side-TMS 1002e 2 Year 2009 - Machine is working - Technical handbook available Neck: 48mm for detergent and cosmetic bottles ...
2009 | 300046070 | SIDE
More information
Stretch blow moulding machines. Sidel SBO4 Compact from 2008 45,000 hours Not production and can't be seen running Very well maintained and can be inspected immediately! Compressor Belliss & Mocrom and chiller included...
2008 | 300045477 | SIDEL
More information
Injection stretch blow moulding machines for PET bottles. Used Nissei ASB 70 DPH V3 Year of manufacture 2006 Mold 44g, neck 80mm Can be seen running and available immediately! ...
2006 | 300045411 | NISSEI ASB
More information
Injection stretch blow moulding machines for PET bottles. Injection Blow Moulding Machine NISSEI ASB 50MB V3 from 2007 Offer include Dryer and loader L&T Offer does not include mould Working Hours : 54500 (August 2021) Machine in perfect working condition and available immediately...
2006 | 300043257 | NISSEI ASB
More information
Injection stretch blow moulding machines for PET bottles. Nissei ASB 70DPH 63mm neck size by 6 cavities. It is producing 4 oz jar, 6 per cycle, 17.42 seconds It is basically brand new because we refurbished the entire machine. It has new valves, new reduction gears, new motors, a new computer system, ...
2006 | 300046175 | NISSEI ASB
More information
Injection stretch blow moulding machines for PET bottles. Injection Blow Moulding Machine NISSEI ASB 50MB V3 from 2005 Working hours: 63863 Documentation avaiable in English. Offer not include any auxiliries Offer does not include mould Machine in perfect working condition and available immediately...
2005 | 300044220 | NISSEI ASB
More information
Injection stretch blow moulding machines for PET bottles. Nissei ASB 70 DPH v2 complete system from 2005 With Piovan dryer Molds available for 63mm and ROPP Machine in production...
2005 | 300044574 | NISSEI ASB
More information
Injection stretch blow moulding machines for PET bottles. Nissei ASB 650 Year: MARCH 2005 Exact model :JAPAN Working hours: 38.947 H Output (bph): 550 PCS/HR Capacity (max volume it can blow): 1LT , 2LT , 3LT , 5LT Moulds included?: Cavities/weight & neck; NECK110MM. (155gr-140gr-125gr-110gr-95gr)...
2005 | 300036923 | NISSEI ASB
More information
Stretch blow moulding machines. Stretch Blow Moulding machine Sidel SBO 18 Series 2 Worked with edible oil but can work with CSD and still water too Hopper and preform loading system included Capacity 21.000 bph for 1 lt Can be shown in dry cycle working condition...
2005 | 300046155 | SIDEL
More information
Injection stretch blow moulding machines for PET bottles. Injection Blow Moulding Machine NISSEI ASB 50MB V3 from 2003 Offer not include any auxiliries Offer does not include mould Working hours: 20085. Documentation available in English. Machine in perfect working condition and available immediately...
2003 | 300044219 | NISSEI ASB
More information
Injection stretch blow moulding machines for PET bottles. Nissei ASB PF8-4B V3 Working hours: 20.000 aprox since refurbishment in 2016 Refurbishment: updated to version 3 in software, preforms transfer Auxiliaries included: Piovan Dehumidifying resin dryer and support structure Machine in production ...
2002 | 300044376 | NISSEI ASB
More information
Stretch blow moulding machines. Used blow moulding system SIDEL SBO 18 Series S2+ Construction year 2002 Includes Dehumidifier Hopper Feederer Control Panel Tipper Working Hours 119,466 Type of Neck 29/25 and PCO 1881 moulds not available All machine documentation av...
2002 | 300044565 | SIDEL
More information
Injection stretch blow moulding machines for PET bottles. Used Nissei ASB PF3-1BH V2 NO Molds available Dryer and plastic dehumidifier - Plastic System included Working hours 116.000 Machine in working condition Maximum volume of the bottle is 6liters ...
2001 | 300038712 | NISSEI ASB
More information
Stretch blow moulding machines. Used blow moulding machine Sidel Model: SBO 6/10 series 1 Year 1998 Neck: 28 BPF the PLC had been substitued recently Machine is stopped but it is possible to test it ...
1998 | 300044104 | SIDEL
More information
Injection stretch blow moulding machines for PET bottles. Used injection molding machine Nissei ASB 50 H Dryer: included Fenco Hopper: Included Piovan No mold available Working hours 144.000 machine has been stopped in April 2023 ...
1998 | 300045428 | NISSEI ASB
More information
Injection stretch blow moulding machines for PET bottles. SIPA Blow moulder type ECS 10000 construction year 1997 Molds - 2 (10 cavity blowing mold for 250ml CSD) ; 2 (10 cavity blowing mold to 290ml water) Neck 28 mm type 1810 The machine includes Injection Blow molding machine Resin Dryer Resin Hopper...
1997 | 300038882 | SIPA
More information
Injection stretch blow moulding machines for PET bottles. Nissei ASB PF4-1B Auxiliaries included: Piovan Dehumidifying resin dryer and hopper Mould for 2 liter Snap-on 36mm bottle 70g In production and available inmediatly...
1997 | 300043728 | NISSEI ASB
More information
Stretch blow moulding machines. Complete system for blowing bottles Kosme KSB 4000 Machine is dismantled since some time. Needs some refurbishment....
1996 | 300026176 | KOSME
More information