Used Twin-screw extruder for other materials

Looking for a used Twin-screw extruder for other materials? Visit us to see our selection for sale!. Twin-screw extruder for other materials Thermo Fischer
  • Used Beverage Machines
  • Used Blow Molding Machine
  • Used Compounding Machines
  • Used Dairy Machine
  • Used Film Converting Machines
  • Used Film Printing Machine
  • Used Film Extrusion Machines
  • Used Injection Moulding Machine
  • Used Pipe Extrusion Machine
  • Used Profile Extrusion Machine
  • Used Recycling Machine
  • Used Thermoforming & Sheet Machinery
  • Used Fruits and Vegetables Machines
  • Other Used Machines

    • Similar Products:

    Twin-screw extruder for PE/PP compounds LEISTRITZ ZSE 27MAXX-48D

    LEISTRITZ ZSE 27MAXX-48D

    Twin-screw extruder for PE/PP compounds

    2013
    Ref: 300045753
    LEISTRITZ
    More information
    Twin-screw extruder for PE/PP compounds REIFENHAUSER RZE 85-41-D

    REIFENHAUSER RZE 85-41-D

    Twin-screw extruder for PE/PP compounds

    1998
    Ref: 300046170
    REIFENHAUSER
    More information
    Melt pump BATTE MELT PUMP ZB-B-100CC BODY

    BATTE MELT PUMP ZB-B-100CC BODY

    Melt pump

    2021
    Ref: 300046438
    BATTE
    More information
    Melt pump MAAG Extrex 40-6 GUST

    MAAG Extrex 40-6 GUST

    Melt pump

    2020
    Ref: 300047054
    MAAG
    More information
    Twin-screw extruder for PE/PP compounds LEISTRITZ ZSE 50GL - 36D

    LEISTRITZ ZSE 50GL - 36D

    Twin-screw extruder for PE/PP compounds

    2001
    Ref: 300039914
    LEISTRITZ
    More information
    Twin-screw extruder for PE/PP compounds LEISTRITZ ZSE60MX-52D

    LEISTRITZ ZSE60MX-52D

    Twin-screw extruder for PE/PP compounds

    2021
    Ref: 300046595
    LEISTRITZ
    More information
    Twin-screw extruder for PE/PP compounds MARIS TM 85LC-37D

    MARIS TM 85LC-37D

    Twin-screw extruder for PE/PP compounds

    1992
    Ref: 300041856
    MARIS
    More information
    Twin-screw extruder for PVC compounds AMUT BA 72

    AMUT BA 72

    Twin-screw extruder for PVC compounds

    2003
    Ref: 300038315
    AMUT
    More information

    Machines sold in the past:

    Twin screw line for rubber granulation: Turbomixer Twin screw extruder ICMA diameter 70 L/D 32 Water ring Granulation head Gamma Meccanica type TDA
    - Feed hopper with a capacity of 50 L - Asynchronous motor 0.55 kW IP55 - CYLINDER LENGTH 24D - CYLINDREN TOTAL LENGTH 600 mm - Screw diameter: 25 mm - Co-rotating twin-screw machine, designed for high pressures up to 275 bar in continuous operation - and high temperatures up to 300°C - The cylinders have 6 modules of 100 mm each made of nitrided steel. - asynchronous motor 27 KW AC IP55, electronically limited to 25 kW - Heating elements are bronze resistors, 1.1 kW each, IP55 - Electrical cabinet IP54 contains: motor speed control units, motor circuit protection switches, switches, thermal relays, main switch,... - main supply voltage in the cabinet: 3 x 400V + E- 50 Hz - control voltage: 24 V, DC - FITSYS + control integrated with extruder - The control consists of 2 independent units: Operator's panel (OIT) and PLC, connected together in DH+ network. - Frontal Cutter Speed range : 300 t to 2500 rpm. - One metering pump Maximum pressure: 10 bar - One dosing pump Aroma Maximum pressure: 10 bar - Additional die for expanded cereal products with 10 replaceable inserts - Additional 8D long auger elements - Filter cylinder to separate liquid from raw material - One set of 2 auger shafts - Pump for feeding the soda base into the cylinder. - CHILLER 2 CONTAINERS WITH OIL - 10 L GEAR OIL VG320 - 1 TORQUE SPANNER - 3 ELECTROVALVES - 4 SHUT-OFF VALVES - 1 CLOSED CYLINDER - 1 PAIR OF SHAFT END NUTS - 2 BLADES - PLASTIC CONTAINERS FOR EXTRUDATE - 1 BIN 120LTRS (ON STEEL BASE WITH WHEELS) - 2 BINS 240LTRS EACH (ON STEEL BASE WITH WHEELS) - 1 BIN 500LTRS (ON STEEL BASE WITH WHEELS) Additional elements available, request information.
    Large laboratory line for compounds with extruder Collin ZK 35P - 56L/D. System in top condition and very inclusive design (with different gravimetrics and dosages for solids and liquids and two granulating systems (strand and UWG). The main parts of the line are made of corrosion-resistant and wear-resistant materials. Consists of: Melt pump and filtration device. Hopper for base polymer: 25 L Hopper for crushed rubber: 25 L Hopper for mineral filler: 50 L Hopper for additives: 10 L Gravimetric dosing unit for base polymer Gravimetric dosing unit for crushed rubber Gravimetric dosing unit for mineral fillers Gravimetric dosing unit for additives Twin screw side feeder Tank for melting PE wax: 50 L Tank for feeding the dosing pump with molten PE wax: 25 L 2 x containers for vaseline oil: 10 L Dosing pump for molten PE wax 2 x vaseline oil dosing pumps 2 x atmospheric degassing device Vacuum degassing device Automatic filter changing device Strang head with eccentric geometry, with 4 holes Water tank on moving frame: 3000 mm Water evacuation unit Heat exchanger to be installed in the water bath Water thermostat: 20-85 Ñ Strang granulator, CSG 174 type Speed: 12-60 m/min Pellet size: diameter 3mm x 3mm Number of strands: 4 Complete set of equipment for underwater granulation Productivity: 30-70 kg/h Pellet size: 2.4 gr/100 pellets Labline water system TVE700ED dryer Siemens S7-300 control system Spare parts included Operating hours: approximately7500.