Used Label Winder

In-line Turret Rewinder with the option of closing finished rolls with a label Max. roll diam. 350 mm Max. web width 330 mm 4 Air mandrels 4 of 76 mm Max. web speed 100 mt/min with 25-38 mm diam. mandrels 150 m/ min with 40- 76 mm diam. mandrels Counter of labels and meters 6 web dividers (5 lanes) Touch Screen H.M.I. Auto roll eject mechanism Adjustable core stop Servo drive - closed loop tension control Hot melt adhesive core glue device completes with 5 transfer wheels Hot melt tail gluing device 4 glue wheels 4 web dividers Rotary web driver Air assisted turn bar 1000 mm diam. cantilevered braked unwind, integral reel lift. Electronic web guide with adjustabe splice table & pneumatic web clamps

Maxi web width: 300 mm Webguide maximum working speed: 250 mt/min minimum working speed: 8 mt/min maximum diameter of unwinding: 800 mm maximum rewinding diameter: 520 mm maximum working width: 280/400 mm minimum working width: 80 mm maximum speed of waste extraction: 32 mt/min pneumatic unwinding reel: diametro 76 mm pneumatic rewinder reel: diametri 40-44 mm (by choice) paper alignment system: pneumatic with single photocell control loop

Inspection and cutting machine Width : 330mm Standard equipment: Controlled acceleration and deceleration Unwinder connection table 1 winding and unwinding shaft of 76mm Electromagnetic clutch changed in 2016 Pneumatic brake Web separator Maximum speed of the machine: 259m/min (the speed of use varies according to the inspection performed) Winding capacity: 610mm Unwinding capacity: 762mm Slow feed pedal (JOG): out of order but available Double clutch gearbox and automatic selection of the winding direction Front inspection Electronic web guide Automatic stop on end of roll Idle speed preselection Electronic metric counter Hour meter Conventional style cabinet Includes the following options: Longitudinal cutting unit with pressure knives (3 cutting sets included) Additional cutting units - quantity: 7 Automatic web feed and clamp Powder clutch changed in 2016 Standard cutting station -with interchangeable lower cylinders (counter part) -with 76mm diameter reel (max waste reel capacity : 660mm) and a capstan Min repeat : 8 1/2" or 68 teeth Max repeat : 18" or 144 teeth Universal adapter for Rotoflex tool Automatic inside/outside winding direction Rear connection table URC1 counter (Universal Rotoflex Controller) integrating the following counter functions -Split labels -Jointed labels -Linear metric and inch -Automatic cell configuration Ultrasonic tension control during unwinding 1 additional 40mm diameter winding shaft Magnetic cylinders 80 -144 Z and cylinders holder (see picture) 80 - 254,000 86 - 273,050 88 - 279,400 92 - 292,100 96 - 304,800 101 - 320,680 112 - 355,600 116 - 368,3 120 - 381,000 134 - 425,45 136 - 431,8 144 - 457,2

In-line machine finishing machine Unwinder 1 UV Screen print unit 1 Hot foil stamping and embossing unit 1 Flat bed die cutting unit Slitter and rewinder Maximum web width: 330 mm Minimum web width: 100 mm Unwind diameter: 900 mm Silkscreen maximum format (W, L): 330 x 330 mm Flat bed foil and embossing maximum format (maximum 40 % of the surface): 330 x 330 mm Maximum rewind diameter according to the configurations:up to 900 mm Speed Flat bed foil: up to 40 m/min Speed Flat bed embossing: up to 45 m/min Speed flat bed screen: up to 30 m/min

Speed : 150m/min Axis diameter : 1.5" to 3" Diameter rewinder : 400mm Width : 450mm PLC Noise : max 80dB