Mono extrusion lines. Film width : 400mm - 1000mm Thickness : 25micr - 130micr Output extruder : 75 - 120kg/h Gravimetric dosing system / 5 components 5 TSM vacuum loaders, TSM Blender Screw 90mm ; L/D 27 10 heating zones Driving system : PLC + inverter Power : 125kW Melt...
1996 | 300044642 | ALPHA MARATHON
More information
Mono extrusion lines. Extruder HS 90; 30 L/D Fixed die head mod: BF 14-35K Die diam. 180 mm IBC Thickness 25-250 my Automatic thickness control system Kundig Gravimetric dosing unit Contrex DE 3000-SN 3 components Motorized calibration basket Rotation haul off Decatex Gu...
2005 | 300046383 | ALPINE
More information
Mono extrusion lines. Thickness range: 0,10-0,35 Screw (diameter L/D): 50/32; year 2023 Heating zones: 7 Rotating die-head: year 2019 Diameter of die plates: 75 and 120 Air ring: Double lip Die lip gap diameter: 120 Calibration basket Final roll width: 700 mm Final roll d...
2008 | 300040679 | ATAC
More information
Mono extrusion lines. Screw L/D: 28:1 Film width (Min.): 250 mm Thickness range: 8 - 40 my Die head: fixed Die plate: 50 mm IBC system: No Air ring type: single-circuit Thickness control system: No Gusseting device: Yes Haul off: fixed Web guide: Yes Corona treatment: Yes...
2006 | 300044887 | CHYI YANG INDUSTRIAL
More information
Mono extrusion lines. Minimum thickness 25 my Maximum thickness 100 my Rotating die head Rewinder: single, max. diam 1000 mm Dosing system: Fellner+Ziegler PVS 310 Corona treatment: Cason Fixed haul off Mixer for material Spare part: additional used screw...
1995 | 300044621 | DOLCI
More information
Mono extrusion lines. Manual cartridge filter changer Single layer rotary head, mouthpiece 80mm and 200mm Basket 1000 mm Haul off 1000 mm Back to back winder 1000 mm Activator Tower 4 m Full manufacturer documentation...
2014 | 300044177 | KANG CHYAU YDA 1F
More information
Mono extrusion lines. Thickness range: 0,012 - 0,150 Rotating Die Head Gusseting device: Yes Fixed Haul Off Web guide: straight edge Corona treatment: Yes Max. reel diameter: 550 мм....
2001 | 300043932 | KWEEN B
More information
Mono extrusion lines. Film thickness range min.-max.: 0,006-0,020 Fixed Die Head Gusseting device: Yes Fixed Haul Off Corona treatment: Yes Max. reel diameter: 500 мм PLC interface language: English Screws were replaced Second identical line is available at the same pric...
2000 | 300043931 | KWEEN B
More information
Mono extrusion lines. Thickness range:20-150 micron Capacity (Kg/h) 90Kg/h at 50 micron Dosing system - Vacuum pump x1 Rotary die head Die diameter 160mm Gap 1.8 IBC no Double lip short neck ring type Thickness measuring system: No Type of calibration basket - manual Guss...
2006 | 300045075 | LUNG MENG
More information
Mono extrusion lines. Extruder Control by plastcontrol GT3 Loss in weight model. Macchi screw-25:1 LD ratio. Standard barrier Die gaps. Rotation Die size (mm): 150 Linear Rich Capable: YES Min Blow (mm): 550 Max Blow (mm): 1100 Max Width LLDPE above 65 mu: 800 Min Thickn...
2004 | 300046062 | MACCHI
More information
Mono extrusion lines. Dosing system : Maguire 83137LC Number of components: 4 Heating zones: 7 Driving system: DC drives Power: 112kw Melt pressure Indicator Fixed die head Diameter of the die head: 170mm approx Diameter of the gap: 147mm approx IBC Air ring PlastCo...
1999 | 300045361 | MAM
More information
Mono extrusion lines. Dosing system : Maguire 940LC Number of components: 4 Fixed die head Diameter of the die head: 170mm approx Diameter of the gap: 147mm approx IBC Air ring PlastControl k400ul Number of inlets: 6 Motorized adjusting of calibrating basket in di...
1999 | 300045360 | MAM
More information
Mono extrusion lines. Dosing system : Moretto LT25 C/60 Number of components: 5 Heating zones: 11 Heating power: heater bands Driving system: invertec drives 132kw 400v 3ph Amtec Melt pressure Indicator Fixed die head Diameter of the die head: 270mm approx Diameter o...
1999 | 300045363 | REIFENHAUSER
More information
Mono extrusion lines. Screw L/D 30 Rotating die 400 mm with IBC Dual lip air ring Thickness 20-150 my Gravimetric dosing unit 6 components Motorized calibrations basket Automatic thickness control system K-design Fixed haul off Double side corona treatment AFS Tower not i...
1998 | 300045594 | REIFENHAUSER
More information
Mono extrusion lines. Minimum thickness 15 my Maximum thickness 300 my Fixed die head Die plates: 180 mm Rewinder: max. diam 1300 mm Corona treatment Rotating haul off...
1994 | 300045777 | TECOM
More information
Mono extrusion lines. Fixed die head diam 150 mm Gravimetric units Contrex 3 components Rotating haul off Corona treatment Cason Screw and barrel have been changed recently...
1999 | 300046248 | TECOM
More information
Mono extrusion lines. Line used as Test Machine so in very good condition Extruder, W&H, E6030 Die Head, Type B120/2 50-ZIK Die Diameter: 200mm Die Gap: 1.0, 1.2, 2.0 mm Heating Zones: 3; Weight: 600 kg Film Cooling Air Blower and air cooling for inner and outer bubbl...
1990 | 300046430 | WINDMÖLLER & HÖLSCHER
More information
Mono extrusion lines. Screw length: 1600 L/D 29 Thickness range: 9-120 my Fixed die head : diam. 250 mm Gap : 2,35 mm Air ring: manual Dosing system: gravimetric Calibration basket Rewinder: double back to back, automatic, max. diam 700 mm Spare parts: 9 heating zones +...
1995 | 300043783 | CMG
More information
Mono extrusion lines. Screw: 40 mm - 30 L/D Motor: 27 Kw Manual screen changer Dynisco melt temperature and pression control Rotating head: die 50 mm Double lip air ring Nip-roll with adjustable height (up-down), 450 mm F&B Corona Treatment, 450 mm Single winder, 450 mm...
2000 | 300045977 | CMG
More information
Mono extrusion lines. Film thickness: 0.005-0.4mm Screw & barrel: 45mm, l/d = 30/1, sacm645 Barrel thermo control: 2 zones Cooling blow motor: 2 set Main motor: 20hp Gear box: 1 set Screen changer: 1 set Die & Air ring: Die head: HDPE 50mm (for layflat 260-400mm) and diam...
2020 | 300045625 | JIN CHANG PLASTIC MACHINERY
More information
Mono extrusion lines. Minimum thickness 8 my Maximum thickness 100 my Dosing system: Octogon; 1 component Rotating die head Gap: 1,6 Rewinder: max. diam 800 mm Corona treatment Fixed haul off Gusseting device: yes The motor was renewed in 2022: new driver The screw was c...
1998 | 300045368 | KUHNE
More information
Mono extrusion lines. Minimum thickness 7 my Maximum thickness 50 my Rotating die head Die plates: 150/180/220/240 mm Gap: 1,3 Rewinder: max. diam 1000 mm Corona treatment: Martignoni Fixed haul off Gusseting device: yes, max. 300 mm...
1992 | 300044629 | MAM
More information
Mono extrusion lines. Film width min. 300 mm Dosing unit - 2 components Screw diam. 50 mm Fixed die head diam. 120 and 150 mm Rotating take- off Single rewinder for reel diam 850 mm Corona treatment Perforation unit AC motor...
1980 | 300039234 | TECOM
More information
Mono extrusion lines. Extruder 50; L/D 28:1 Fillm width from 250 to 700 mm Thicknesses 8-80 my Fixed die head with die plates 70 and 100 mm Air Ring type: Air blower inverter 5 HP Screw and barrel changed in 2012 Tower included...
2001 | 300046373 | VENUS
More information