Mono extrusion lines. Manual cartridge filter changer Single layer rotary head, mouthpiece 80mm and 200mm Basket 1000 mm Haul off 1000 mm Back to back winder 1000 mm Activator Tower 4 m Full manufacturer documentation...
2014 | 300044177 | KANG CHYAU YDA 1F
More information
Mono extrusion lines. Thickness range: 0,10-0,35 Screw (diameter L/D): 50/32; year 2023 Heating zones: 7 Rotating die-head: year 2019 Diameter of die plates: 75 and 120 Air ring: Double lip Die lip gap diameter: 120 Calibration basket Final roll width: 700 mm Final roll d...
2008 | 300040679 | ATAC
More information
Mono extrusion lines. Screw L/D: 28:1 Film width (Min.): 250 mm Thickness range: 8 - 40 my Die head: fixed Die plate: 50 mm IBC system: No Air ring type: single-circuit Thickness control system: No Gusseting device: Yes Haul off: fixed Web guide: Yes Corona treatment: Yes...
2006 | 300044887 | CHYI YANG INDUSTRIAL
More information
Mono extrusion lines. Thickness range:20-150 micron Capacity (Kg/h) 90Kg/h at 50 micron Dosing system - Vacuum pump x1 Rotary die head Die diameter 160mm Gap 1.8 IBC no Double lip short neck ring type Thickness measuring system: No Type of calibration basket - manual Guss...
2006 | 300045075 | LUNG MENG
More information
Mono extrusion lines. Extruder HS 90; 30 L/D Fixed die head mod: BF 14-35K Die diam. 180 mm IBC Thickness 25-250 my Automatic thickness control system Kundig Gravimetric dosing unit Contrex DE 3000-SN 3 components Motorized calibration basket Rotation haul off Decatex Gu...
2005 | 300046383 | ALPINE
More information
Mono extrusion lines. Extruder Control by plastcontrol GT3 Loss in weight model. Macchi screw-25:1 LD ratio. Standard barrier Die gaps. Rotation Die size (mm): 150 Linear Rich Capable: YES Min Blow (mm): 550 Max Blow (mm): 1100 Max Width LLDPE above 65 mu: 800 Min Thickn...
2004 | 300046062 | MACCHI
More information
Mono extrusion lines. Thickness range: 0,012 - 0,150 Rotating Die Head Gusseting device: Yes Fixed Haul Off Web guide: straight edge Corona treatment: Yes Max. reel diameter: 550 мм....
2001 | 300043932 | KWEEN B
More information
Mono extrusion lines. Film thickness range min.-max.: 0,006-0,020 Fixed Die Head Gusseting device: Yes Fixed Haul Off Corona treatment: Yes Max. reel diameter: 500 мм PLC interface language: English Screws were replaced Second identical line is available at the same pric...
2000 | 300043931 | KWEEN B
More information
Mono extrusion lines. Dosing system : Maguire 83137LC Number of components: 4 Heating zones: 7 Driving system: DC drives Power: 112kw Melt pressure Indicator Fixed die head Diameter of the die head: 170mm approx Diameter of the gap: 147mm approx IBC Air ring PlastCo...
1999 | 300045361 | MAM
More information
Mono extrusion lines. Dosing system : Maguire 940LC Number of components: 4 Fixed die head Diameter of the die head: 170mm approx Diameter of the gap: 147mm approx IBC Air ring PlastControl k400ul Number of inlets: 6 Motorized adjusting of calibrating basket in di...
1999 | 300045360 | MAM
More information
Mono extrusion lines. Dosing system : Moretto LT25 C/60 Number of components: 5 Heating zones: 11 Heating power: heater bands Driving system: invertec drives 132kw 400v 3ph Amtec Melt pressure Indicator Fixed die head Diameter of the die head: 270mm approx Diameter o...
1999 | 300045363 | REIFENHAUSER
More information
Mono extrusion lines. Fixed die head diam 150 mm Gravimetric units Contrex 3 components Rotating haul off Corona treatment Cason Screw and barrel have been changed recently...
1999 | 300046248 | TECOM
More information
Mono extrusion lines. Screw L/D 30 Rotating die 400 mm with IBC Dual lip air ring Thickness 20-150 my Gravimetric dosing unit 6 components Motorized calibrations basket Automatic thickness control system K-design Fixed haul off Double side corona treatment AFS Tower not i...
1998 | 300045594 | REIFENHAUSER
More information
Mono extrusion lines. Film width : 400mm - 1000mm Thickness : 25micr - 130micr Output extruder : 75 - 120kg/h Gravimetric dosing system / 5 components 5 TSM vacuum loaders, TSM Blender Screw 90mm ; L/D 27 10 heating zones Driving system : PLC + inverter Power : 125kW Melt...
1996 | 300044642 | ALPHA MARATHON
More information
Mono extrusion lines. Minimum thickness 25 my Maximum thickness 100 my Rotating die head Rewinder: single, max. diam 1000 mm Dosing system: Fellner+Ziegler PVS 310 Corona treatment: Cason Fixed haul off Mixer for material Spare part: additional used screw...
1995 | 300044621 | DOLCI
More information
Mono extrusion lines. Minimum thickness 15 my Maximum thickness 300 my Fixed die head Die plates: 180 mm Rewinder: max. diam 1300 mm Corona treatment Rotating haul off...
1994 | 300045777 | TECOM
More information
Mono extrusion lines. Line used as Test Machine so in very good condition Extruder, W&H, E6030 Die Head, Type B120/2 50-ZIK Die Diameter: 200mm Die Gap: 1.0, 1.2, 2.0 mm Heating Zones: 3; Weight: 600 kg Film Cooling Air Blower and air cooling for inner and outer bubbl...
1990 | 300046430 | WINDMÖLLER & HÖLSCHER
More information
Mono extrusion lines. Film thickness: 0.005-0.4mm Screw & barrel: 45mm, l/d = 30/1, sacm645 Barrel thermo control: 2 zones Cooling blow motor: 2 set Main motor: 20hp Gear box: 1 set Screen changer: 1 set Die & Air ring: Die head: HDPE 50mm (for layflat 260-400mm) and diam...
2020 | 300045625 | JIN CHANG PLASTIC MACHINERY
More information
Mono extrusion lines. Extruder 50; L/D 28:1 Fillm width from 250 to 700 mm Thicknesses 8-80 my Fixed die head with die plates 70 and 100 mm Air Ring type: Air blower inverter 5 HP Screw and barrel changed in 2012 Tower included...
2001 | 300046373 | VENUS
More information
Mono extrusion lines. Screw: 40 mm - 30 L/D Motor: 27 Kw Manual screen changer Dynisco melt temperature and pression control Rotating head: die 50 mm Double lip air ring Nip-roll with adjustable height (up-down), 450 mm F&B Corona Treatment, 450 mm Single winder, 450 mm...
2000 | 300045977 | CMG
More information
Mono extrusion lines. Minimum thickness 8 my Maximum thickness 100 my Dosing system: Octogon; 1 component Rotating die head Gap: 1,6 Rewinder: max. diam 800 mm Corona treatment Fixed haul off Gusseting device: yes The motor was renewed in 2022: new driver The screw was c...
1998 | 300045368 | KUHNE
More information
Mono extrusion lines. Screw length: 1600 L/D 29 Thickness range: 9-120 my Fixed die head : diam. 250 mm Gap : 2,35 mm Air ring: manual Dosing system: gravimetric Calibration basket Rewinder: double back to back, automatic, max. diam 700 mm Spare parts: 9 heating zones +...
1995 | 300043783 | CMG
More information
Mono extrusion lines. Minimum thickness 7 my Maximum thickness 50 my Rotating die head Die plates: 150/180/220/240 mm Gap: 1,3 Rewinder: max. diam 1000 mm Corona treatment: Martignoni Fixed haul off Gusseting device: yes, max. 300 mm...
1992 | 300044629 | MAM
More information
Mono extrusion lines. Film width min. 300 mm Dosing unit - 2 components Screw diam. 50 mm Fixed die head diam. 120 and 150 mm Rotating take- off Single rewinder for reel diam 850 mm Corona treatment Perforation unit AC motor...
1980 | 300039234 | TECOM
More information