Coextrusion lines. 5 layers extrusion line Extruders 3x 45 mm, LD30 with hydraulic screen changers 2x 55 mm, LD30 with hydraulic screen changers Syncro gravimetric units, 4 components for each extruder 5 layers coextrusion die head with IBC mod TE551, insert range 2...
2021 | 300046553 | MACCHI
More information
Coextrusion lines. Currently producing for Laminates, surface protection film etc. This machine is not for barrier films 55+60+75+60+55 Extruder Diameters(Power: 22+30+45+30+22 kW motors) 1+3 comp. CONAIRE gravimetric Dosing Units. 375 x 2.2 mm Die. IBC with ...
2020 | 300044371 | WINDSOR
More information
Coextrusion lines. 5 layers FFS line, 1000 mm wide with an offline printing machine from BFM. 5-layer Coextruder with 50/60/70/60/50 mm extruder L/D 30 Pivoting Screen Changers Evolution 160/500-5 Die Head Layout for die insert 225 mm - 500 mm (8.9''- 19.7'') Prepar...
2020 | 300046200 | REIFENHAUSER
More information
Coextrusion lines. The line did not process pure HDPE in 5 layers; 1 to 2 layers are possible with LDPE. For the rest of the materials: LDPE, LLDPE, MLLDPE, regenerated. Capacity: 400 to 450 kgs of maximum output depending on the width and thickness. The machine can ma...
2018 | 300045449 | ALPINE
More information
Coextrusion lines. Coextrusion line ABC for the production of lamination and stretch film Fixed die head, 2 die plates available 400 mm and 440 mm (new) Thickness 30-500 my Gravimetric unit 4 components for each extruder Syncro Thickness control system Syncro Corona t...
2018 | 300045990 | KUNG HSING
More information
Coextrusion lines. 5 layers extrusion line Extruders 4x 60mm / 30D / 45 kW grooved feed barrier screw extruder 1x 90mm / 30 D / 110 kW grooved feed barrier screw extruder 20 (1+3 for each extruder) component Material conveying, gravimetric blending & GSM control...
2017 | 300046630 | RAJOO
More information
Coextrusion lines. OPTIMEX coex 3 layer blown film line, working width 2200 mm for the production of laminating film Extruder combination 70/90/70.30D Extruder A: 70.30D - outer layer screw speed up to 180 rpm three-phase drive, 82 kW Extruder B: 90.30D - core la...
2015 | 300045537 | WINDMÖLLER & HÖLSCHER
More information
Coextrusion lines. 5-layer coextrusion line OVERFIVE PLUS for the production of agricultural stretch LDPE film Film thickness: 23-25 microns Type 75/75/75/100/75/Z/3600 DW - LSW " LD" 4x LHE 75/30 extruder with Magnetic 84Kw motor with Zambello 1x LHE 100/32 extrud...
2015 | 300046725 | CMG
More information
Mono extrusion lines. Manual cartridge filter changer Single layer rotary head, mouthpiece 80mm and 200mm Basket 1000 mm Haul off 1000 mm Back to back winder 1000 mm Activator Tower 4 m Full manufacturer documentation...
2014 | 300044177 | KANG CHYAU YDA 1F
More information
Coextrusion lines. Water-quench 3 Layer blown film extrusion line turned up-side-down for production of Films (ex. Medical) of PP/TPP/PP Layer Structure: A - B - C H-PP /T-PP/H-PP 20-25 % / 50-60 % / 20-25 % Extruder capacity K 105 - 30 D: max.250 kg/h PP K 6...
2013 | 300044773 | KUHNE
More information
Coextrusion lines. 5 layers 2100 mm width Blown Film Line Speed. Max 150 m/min. Min. 15 micron +/- 5% thickness. Diameters: 65+45+55+45+65 mm 30:1 Extruders, 4-comp. gravimetric dosing unit on 65 mm & 55 mm Extruders, 1-component on 45 mm Extruders. PIOVAN 450 mm Di...
2009 | 300043126 | MACCHI
More information
Mono extrusion lines. Thickness range: 0,10-0,35 Screw (diameter L/D): 50/32; year 2023 Heating zones: 7 Rotating die-head: year 2019 Diameter of die plates: 75 and 120 Air ring: Double lip Die lip gap diameter: 120 Calibration basket Final roll width: 700 mm Final roll d...
2008 | 300040679 | ATAC
More information
Coextrusion lines. Plastcontrol dosing system type GMU gravimetric control type PC5L with motors type RCM3 , loading type PCH400 Layer A Main dosing unit, hopper 100kg approx. Secondary dosing unit flow rate 0.3-40kg/h, hopper 25kg approx. Layer B Main feeder, hop...
2007 | 300046314 | KUHNE
More information
Coextrusion lines. Water Quenched Blown Film System 7 layer Aqua frost line originally bought from BRAMPTON ENGINEERING Film width: up to 850mm depending upon the ring sizes Output or the extruder: 300 kgs per hour depending upon the ring size and thickness of the fi...
2006 | 300044249 | ALPHA MARATHON
More information
Mono extrusion lines. Screw L/D: 28:1 Film width (Min.): 250 mm Thickness range: 8 - 40 my Die head: fixed Die plate: 50 mm IBC system: No Air ring type: single-circuit Thickness control system: No Gusseting device: Yes Haul off: fixed Web guide: Yes Corona treatment: Yes...
2006 | 300044887 | CHYI YANG INDUSTRIAL
More information
Mono extrusion lines. Thickness range:20-150 micron Capacity (Kg/h) 90Kg/h at 50 micron Dosing system - Vacuum pump x1 Rotary die head Die diameter 160mm Gap 1.8 IBC no Double lip short neck ring type Thickness measuring system: No Type of calibration basket - manual Guss...
2006 | 300045075 | LUNG MENG
More information
Coextrusion lines. Output: 160~220 kg/hr. Depending on material Thickness range: 18-160 micron. (3-15 umicron nylon / tie-layers) 5 x 55 mm diameter screw 5x 1 component volumetric Dosing unit. Die head: 350 x 2.5 mm, Run with or without IBC air blower motor hp of...
2005 | 300044341 | RAJOO
More information
Mono extrusion lines. Extruder HS 90; 30 L/D Fixed die head mod: BF 14-35K Die diam. 180 mm IBC Thickness 25-250 my Automatic thickness control system Kundig Gravimetric dosing unit Contrex DE 3000-SN 3 components Motorized calibration basket Rotation haul off Decatex Gu...
2005 | 300046383 | ALPINE
More information
Coextrusion lines. Screws 90 and 55 mm Layers ABA Fixed die head 220mm Automatic - Double Winding Web guide Rotating haul off Corona treatment Thickness from 30 to 100 my Tower...
2004 | 300038388 | DIING KUEN
More information
Mono extrusion lines. Extruder Control by plastcontrol GT3 Loss in weight model. Macchi screw-25:1 LD ratio. Standard barrier Die gaps. Rotation Die size (mm): 150 Linear Rich Capable: YES Min Blow (mm): 550 Max Blow (mm): 1100 Max Width LLDPE above 65 mu: 800 Min Thickn...
2004 | 300046062 | MACCHI
More information
Coextrusion lines. Materials: LDPE, LLDPE, HDPE, EVA, PA Thickness: 20-200 my 2x90mm Brampton extruder with Manual Screen Changer, 93kW AC Drive 1x90mm Brampton extruder with Manual Screen Changer, 112kW AC Drive ITALYCS ®IV PLC based Control Cabinet with Host PC , S...
2004 | 300046284 | BRAMPTON
More information
Coextrusion lines. 7 Layers Macchi that can produce different types of films with thicknesses from 30my to 370my Polythene based film with different types of PE homopolymers and copolymers. High gas barrier film using EVOH polymers. Thermoforming and gas barrier film ...
2003 | 300045265 | MACCHI
More information
Coextrusion lines. Extruders configuration: 50/70/50.30D Die Model: B 225/315-3 225mm for HDPE and 315mm for Schrink and Stretch film speed: 120m/min max Optifil Plus control unit Thickness control OPTIFIL K Filmatic K Double winder (renovated in 2019) Film thickness: ...
2002 | 300042763 | WINDMÖLLER & HÖLSCHER
More information
Coextrusion lines. 3 OM65/30 extruders 3 manual screen changers 3 pressure transducers 1 "Multisplit" 3-layer fixed head with 350mm die - Air gap: 1.3mm 1 cooling ring with automatic lip profile control 1 internal IBC ultrasonic bubble cooling system 1 calibration bas...
2002 | 300046460 | DOLCI
More information
Mono extrusion lines. Thickness range: 0,012 - 0,150 Rotating Die Head Gusseting device: Yes Fixed Haul Off Web guide: straight edge Corona treatment: Yes Max. reel diameter: 550 мм....
2001 | 300043932 | KWEEN B
More information
Coextrusion lines. - die-head diameter 165 mm - extruder diameter 3x 60 mm - range of thickness 20-150 my - COVEX cooling ring - gravimetric system CONTREX DE 3000E, 3 components - 1 per extruder - the IBC system - corona treatment MARTIGNONI HFIGBT - rotating haul-off...
2000 | 300038678 | COVEX
More information
Mono extrusion lines. Film thickness range min.-max.: 0,006-0,020 Fixed Die Head Gusseting device: Yes Fixed Haul Off Corona treatment: Yes Max. reel diameter: 500 мм PLC interface language: English Screws were replaced Second identical line is available at the same pric...
2000 | 300043931 | KWEEN B
More information
Coextrusion lines. 3 extruders 2x35mm LD 30 and 1x 50 mm LD 30 Manual screen changer Die head ACH3/R with 2 die plates, 100 and 200 mm with external bubble cooling Calibration basket 1200 8-6/ CS Haul off TPE 1200 Double automatic rewinder BPE 1200/2 Tower Thickness 2...
2000 | 300046106 | BANDERA
More information
Coextrusion lines. Coex Agriculture Blow FIlm Extrusion line Die Head is 2000mm diameter 19T (2x2 Steel) Main extruder: 200mm Second 90mm 16mm Up to 18m width of open flat film Take off and single winder is 4m width Gravimetric feeding unit with 4 components Side gus...
1999 | 300042669 | BANDERA
More information
Coextrusion lines. Film structure A-B-C Layer structures 15% - 70% - 15% Film width max.1600mm Max output 360kg/hr approx. (LDPE - 350mm die - 50microns - 1600mm width) Thickness range : 20-150microns Line compositon : 1x E-75-AP extruder (L/D 30 ; 75mm screw) 20...
1999 | 300044259 | GHIOLDI
More information
Coextrusion lines. 3 extruders: 2x65 mm, 1x75 mm Die head with 450 mm die + one 400 mm die (spare) Haul-off and gusseting device. Maximum circumference produced 6000 mm, thickness 50 my Bandera double rewinder (useful width 2800 mm). Thicknesses from 25 to 280 microns...
1999 | 300045127 | BANDERA
More information
Mono extrusion lines. Dosing system : Maguire 83137LC Number of components: 4 Heating zones: 7 Driving system: DC drives Power: 112kw Melt pressure Indicator Fixed die head Diameter of the die head: 170mm approx Diameter of the gap: 147mm approx IBC Air ring PlastCo...
1999 | 300045361 | MAM
More information
Mono extrusion lines. Dosing system : Maguire 940LC Number of components: 4 Fixed die head Diameter of the die head: 170mm approx Diameter of the gap: 147mm approx IBC Air ring PlastControl k400ul Number of inlets: 6 Motorized adjusting of calibrating basket in di...
1999 | 300045360 | MAM
More information
Mono extrusion lines. Dosing system : Moretto LT25 C/60 Number of components: 5 Heating zones: 11 Heating power: heater bands Driving system: invertec drives 132kw 400v 3ph Amtec Melt pressure Indicator Fixed die head Diameter of the die head: 270mm approx Diameter o...
1999 | 300045363 | REIFENHAUSER
More information
Mono extrusion lines. Fixed die head diam 150 mm Gravimetric units Contrex 3 components Rotating haul off Corona treatment Cason Screw and barrel have been changed recently...
1999 | 300046248 | TECOM
More information
Mono extrusion lines. Screw L/D 30 Rotating die 400 mm with IBC Dual lip air ring Thickness 20-150 my Gravimetric dosing unit 6 components Motorized calibrations basket Automatic thickness control system K-design Fixed haul off Double side corona treatment AFS Tower not i...
1998 | 300045594 | REIFENHAUSER
More information
Coextrusion lines. 3x 45 mm extruders The min-max width would be 300-1200mm, and the min-max thickness 30-500 microns. AFS corona treater Vollmann gravimetric system Rotating die head 195 mm with IBC Gap 1mm Air Ring manual; Octagon Smart lip Thickness control system n...
1997 | 300043507 | KUHNE
More information
Coextrusion lines. Dosing system : Maguire 104 445 c/t/17 Number of components: 5 Heating zones: 4 on screws, 2 on transfer zone, 5 die zones Driving system: AC motor, AC drive Melt pressure Indicator Fixed die head Diameter of the die head: 370mm approx Diameter...
1997 | 300045362 | MAM
More information
Mono extrusion lines. Film width : 400mm - 1000mm Thickness : 25micr - 130micr Output extruder : 75 - 120kg/h Gravimetric dosing system / 5 components 5 TSM vacuum loaders, TSM Blender Screw 90mm ; L/D 27 10 heating zones Driving system : PLC + inverter Power : 125kW Melt...
1996 | 300044642 | ALPHA MARATHON
More information
Mono extrusion lines. Minimum thickness 25 my Maximum thickness 100 my Rotating die head Rewinder: single, max. diam 1000 mm Dosing system: Fellner+Ziegler PVS 310 Corona treatment: Cason Fixed haul off Mixer for material Spare part: additional used screw...
1995 | 300044621 | DOLCI
More information
Mono extrusion lines. Minimum thickness 15 my Maximum thickness 300 my Fixed die head Die plates: 180 mm Rewinder: max. diam 1300 mm Corona treatment Rotating haul off...
1994 | 300045777 | TECOM
More information
Mono extrusion lines. Line used as Test Machine so in very good condition Extruder, W&H, E6030 Die Head, Type B120/2 50-ZIK Die Diameter: 200mm Die Gap: 1.0, 1.2, 2.0 mm Heating Zones: 3; Weight: 600 kg Film Cooling Air Blower and air cooling for inner and outer bubbl...
1990 | 300046430 | WINDMÖLLER & HÖLSCHER
More information
Mono extrusion lines. Film thickness: 0.005-0.4mm Screw & barrel: 45mm, l/d = 30/1, sacm645 Barrel thermo control: 2 zones Cooling blow motor: 2 set Main motor: 20hp Gear box: 1 set Screen changer: 1 set Die & Air ring: Die head: HDPE 50mm (for layflat 260-400mm) and diam...
2020 | 300045625 | JIN CHANG PLASTIC MACHINERY
More information
Coextrusion lines. 3 layered asymmetric PA/PE tubular film Thickness range : 50-150 microns, depending on processed polymers Layflat : 200-350mm, single winder Output : 10 kg/h max with PE 3 layers : A-B-C Screws diameters : 20-25-30mm L/D ratio : 30:1 Lever manual sc...
2020 | 300045989 | EUR.EX.MA
More information
Coextrusion lines. EVO 5-layer blown film line The UltraStretch (MDO) in the haul-off will be removed. Hence the machine will have only standard Reifenhauser Evolution haul-off. Automation : EVO OS Material handling : 25 components Extrusion : 70/70/80/70/70 Die diamet...
2018 | 300045911 | REIFENHAUSER
More information
Coextrusion lines. Thickness range: 25 Micron / 100 Micron Dosing system : Hopper Auto Loader Number of components: One Screw : Middle, Inner / Outer, 45 MM Heating zones: 11 Heating power: 27.6kW Driving system: AC Variable Speed Drive, ABB Power: 20 HP + 15 HP (Total...
2017 | 300044843 | SHUBHAM EXTRUSION, INDIA
More information
Coextrusion lines. Fixed die head TYP 5 WV - IBC 5, die plate 350 mm, gap 1,5. Additional gap ring with gap width 2.8mm Thickness range:20-250 my Dosing system OCTAGON, 1+4 (A,C,E extruders) and 1+3 (B, D extruders) components. Suction units MOTAN in each dosing un...
2012 | 300040506 | KUHNE
More information
Coextrusion lines. 2100 mm layflat 3-layer IBC Blown Film Line. Kolsite. 25-200 micron, 1:2:1. 2 x 60 mm 30:1 Extruder, 55 kW AC drive. 4-zone 12.8 kW ceramic heaters & blowers. 1 x 75 mm 30:1 Extruder, 90 kW AC drive. 5-zone ceramic heaters & blowers. Each e...
2012 | 300043323 | KOLSITE
More information
Coextrusion lines. Installed in 2012 Windsor-Kuhne coex 3 Blow film Extruder Windsor IBC REX-1500. 60+75+60 mm Extruders 56+75+56 kW motors. Prasad Hopper Loader. 1-comp. DOTECO Gravimetric Dosing GSM control system (2016) with Gravimetric gain-in-weight batch Blend...
2011 | 300043523 | WINDSOR
More information
Coextrusion lines. Extruders 2x 55/30D 1X 65/30D Dosing unit Doteco Grado, 4 components for each extruder Fixed die head with IBC COEX Flex TE501, die plate 180 mm, gap 1,8 mm. Die plate range 150-300 mm Motorized calibration basket Automatic web guide BST Haul off Te...
2005 | 300045926 | MACCHI
More information
Coextrusion lines. Extruders 3x65 mm LD 27 3 components EnginPlast dosing units for each extruder Head with 220 mm die and IBC Gap 1.35/1.8 mm Rotating haul off Web guide Chiller Thicknesses currently produced 16- 28 my Thickness control system not working Available f...
2004 | 300044145 | MAM
More information
Coextrusion lines. Oscillating haul off Semiautomatic winder Screw dia - 55/55/55 L/d - 24:1 Air ring make if have - Windsor Panel and drive make - yashkawa A1000 drive Thickness controller - No Hopper loader - Manual Die diam 325mm Web guide Corona treater ...
2004 | 300046109 | WINDSOR
More information
Coextrusion lines. Extrusion line, for the production of 3-layer bubble film, equipped with coex flex dimension 3 coextrusion platform with : 2 plastex 65 / 30 d high performance single-screw extruders 1 plastex 80 / 30 d high performance single-screw extruder: Materi...
2003 | 300046189 | MACCHI
More information
Mono extrusion lines. Extruder 50; L/D 28:1 Fillm width from 250 to 700 mm Thicknesses 8-80 my Fixed die head with die plates 70 and 100 mm Air Ring type: Air blower inverter 5 HP Screw and barrel changed in 2012 Tower included...
2001 | 300046373 | VENUS
More information
Mono extrusion lines. Screw: 40 mm - 30 L/D Motor: 27 Kw Manual screen changer Dynisco melt temperature and pression control Rotating head: die 50 mm Double lip air ring Nip-roll with adjustable height (up-down), 450 mm F&B Corona Treatment, 450 mm Single winder, 450 mm...
2000 | 300045977 | CMG
More information
Coextrusion lines. Alpine Coextruder HS 50/50/50 S Screw diameter : 50/50/50 mm Screw length : 25/25/25 L/D Motor rating : 44/44/44 kW Heating capacity : 9.8/9.8/9.8 kW Die diameter : 180 mm / Die Gap 2.5 mm Lay Flat width : 520-1000 mm IBC Calibrating basket: lay fl...
1999 | 300045879 | ALPINE
More information
Mono extrusion lines. Minimum thickness 8 my Maximum thickness 100 my Dosing system: Octogon; 1 component Rotating die head Gap: 1,6 Rewinder: max. diam 800 mm Corona treatment Fixed haul off Gusseting device: yes The motor was renewed in 2022: new driver The screw was c...
1998 | 300045368 | KUHNE
More information
Mono extrusion lines. Screw length: 1600 L/D 29 Thickness range: 9-120 my Fixed die head : diam. 250 mm Gap : 2,35 mm Air ring: manual Dosing system: gravimetric Calibration basket Rewinder: double back to back, automatic, max. diam 700 mm Spare parts: 9 heating zones +...
1995 | 300043783 | CMG
More information
Mono extrusion lines. Minimum thickness 7 my Maximum thickness 50 my Rotating die head Die plates: 150/180/220/240 mm Gap: 1,3 Rewinder: max. diam 1000 mm Corona treatment: Martignoni Fixed haul off Gusseting device: yes, max. 300 mm...
1992 | 300044629 | MAM
More information
Mono extrusion lines. Film width min. 300 mm Dosing unit - 2 components Screw diam. 50 mm Fixed die head diam. 120 and 150 mm Rotating take- off Single rewinder for reel diam 850 mm Corona treatment Perforation unit AC motor...
1980 | 300039234 | TECOM
More information