Used EPS Shape Moulding Machines

EPS forming machine with mould for the production of U-shaped corners for door packaging With installed mould, it is possible to produce U-shaped corner with the following dimensions: 1000 mm x 60 mm x 60 mm (see photos) Corner wall thickness: 9 mm Mould is included in the price.

The machine is designed for the production of moulded polystyrene foam products. The moulding process is carried out using water steam and a vacuuming process in full automatic mode. Approximate water steam consumption: 450 kg/h (0.15 MPa) Approximate compressed air consumption: 400 l/min (0,6 - 0,8 MPa) Foam density range: 8 - 40 kg/m3 Machine capacity depends on product type When using good quality material, the machine can produce up to 60 cycles per hour The mould for the production of 6 panels is included in the price (see photos).

EPS forming machine with mould for the production of EPS formwork blocks In one cycle the machine produces 2 blocks open on both sides and 1 block closed on one side (see photos) Block size: 1000 mm x 250 mm x 250 mm Block wall thickness: 50 mm The mould is included in the price.

Operating voltage: 220/380V 50 Hz Control voltage: 24V Machine stroke: 800 mm Max moulding size: 1510x870 mm Max depth of moulding: 180 mm

EPS Shape moulder machine Max dimensions: 1510/1200 Seedling tray mold included in the price. Dimensions L x W x H: 524mm x 334mm x 57mm Cavity dimensions in mm: Superior: 22x22; Cavity height 50mm; Dripping hole: 8mm Still in production