PLASMAC - Alpha 35
Single screw repelletizing line. Inline triming recycling line for plastic film...
2016 | 300043646 | PLASMAC
Single screw repelletizing line. Inline triming recycling line for plastic film...
2016 | 300043646 | PLASMAC
Single screw repelletizing line. Laboratory line for granulation from a rope Neodymium magnets in the hopper KO Steel bathtub with closed water circulation Refurbished Metalchem granulator The line was used only to test batches of input raw materials, very low production hours...
2003 | 300046123 | REIFENHAUSER
Single screw repelletizing line. Recycling machine type E:GRAN 50-12 AP consisting of: 1-Recycling machine type E:GRAN 50-12 The edge strips, endless or pre-cut, are conveyed into the infeed area of the of the machine. The rotating screw in this infeed area picks up the edge strip...
2015 | 300045529 | NGR
Single screw repelletizing line. Reel & trim feeder...
2004 | 300045951 | PLASMAC
Single screw repelletizing line. It is an edge trim extraction + regranulation line. Sell since only used 10hours Output 10-50kg/h Water cooled...
2019 | 300046370 | EREMA
Single screw repelletizing line. 2 sets of squeeze rolls for thin and thick film (1.5 mm and 2.0 mm). Rolls practically new, purchased in 2011. Forced feed unit feeds trim directly into the extruder - closed cycle production. Complete set for processing and returning cuttings in lin...
2007 | 300043901 | EXACT
Single screw repelletizing line. Granulator after complete overhaul in 2010 at EXACT factory, only worked 6 months. Forced feeding unit manufactured in 2010. 2 sets of squeeze rollers for thin and thick film (1,5 mm and 2,0 mm). Rolls practically new, bought in 2011. Forced feed u...
2001 | 300043898 | EXACT
Single screw repelletizing line. Materials processed: HDPE and LDPE Origin of materials processed: Internal Scrap Reel feeder...
1996 | 300045873 | MUNCHY
Single screw repelletizing line. Conveyor belt Grinder: 22kW Metal detector DC motor Filter diameter is 125 mm The cutting system has two stationary knife and three flying knife on the engine shaft. The mixing mill is Bruno Folcieri TAV.1.T.T.C. 400, weights of mill 1500 kg, dimensi...
2002 | 300038052 | TECNOVA
Single screw repelletizing line. Water consumption 13 m2/h Cooling fans power 0,75 kW x 6 Main engine power 94 KW Hydraulic screen changer 200mm Cutting: engine power 1,5 kW Vibrating screen 8,5 kW Silo with clamp force: engine power 4,6 kW No CE certificate....
1988 | 300044123 | EUROTECNO
Single screw repelletizing line. Applicable Materials PE, PP film Conveying Unit Feeding band 3500 X 600 mm Feeding control Automatic feeding controlled by Ampere meter Shredding drum Drum dia. 650 mm Cooling blower 1/8 HP X 2 sets, with water cooling device Rotary cutter 4 pcs (...
2016 | 300046026 | POLYSTAR
Single screw repelletizing line. Main drive power: 45 kW AC Heating Power: Extruder (40 kW) + Filter (10 kW) Semi-automatic hydraulic screen changer (without interrupting the extrusion) Dosing unit Degassing pump Cooling water bath Electrical control equipment with cooling Pel...
1995 | 300046168 | PREALPINA
Single screw repelletizing line. Gamma Meccanica single screw extruder D60 L/D 35 with : Degassing Quick Changing Filter Cooling Tank Circulation pump Dryer Pelletizer Vibrating sieve Blower Big-bag support filler (New chamber and refurbished screw. 30 KW main motor with Inverter) ...
1996 | 300046531 | GAMMA MECCANICA
Single screw repelletizing line. Suitable for processing: PE/PP/PS 8mm diameter screen Humidity max 3 % Silo: capacity 2m³ Water head cutter Air cooling Venturi, cyclone and pipes Installed power: 30 Kw...
2003 | 300046581 | TECNOVA
Single screw repelletizing line. Conveyor belt including metal detector Length: 4700 mm Max. load: 100 kg Roll feeder dual driven Max. feeding width: 285 mm S-DUG 100 Dosing unit for additives One component dosing unit for additives (eg. masterbatch in form of granules), mounted ...
2017 | 300045137 | NGR
Single screw repelletizing line. Line composed of : -1 conveyor with metal detector -1 compactor-grinder -1 extruder diameter 70mm -1 degassing pump with 2 orifices -1 automatic double piston screen changer -1 cutting and drying unit -1 turbine for pellet transport Conveyor belt F...
1998 | 300045377 | EREMA
Single screw repelletizing line. Repeletizing line for trimming material coming from breathable film (diapers), with CaCO3 up to 80%. Maximum trim width: 140mm Conveyor belt Shredder-extruder combination Vibrating screen...
1999 | 300043046 | NGR
Single screw repelletizing line. Erema with fully automatic backflush filtration with hot die face pelletising system Polymer: PP Throughput 150 - 200 kg Processed material Material: BOPP; Origin of material: Prod. waste offline (producer); Shape of material: Pieces, Regrind Use...
2017 | 300043111 | EREMA
Single screw repelletizing line. Complete repelletizing line with a maximum production capacity of 200 kgs/hour. Line GM 90 (CE) 1996 Production 180-200kg/h PE: -Material belt conveyor with metal detector -Grinder 250 kg/h, 75 hp -Forced feeding silo -Extruder GM90-33D, 55 hp -Scree...
1996 | 300044411 | GAMMA MECCANICA
Single screw repelletizing line. Material that can be processed: PE, PP, Extruder hopper type: Agglomerator/Cutter Compactor Extruder motor: 75 kW Cutter-compactor motor: 55 kW Centrifuge Cyclone Vacuum pump Big bag loading station Feeding silo...
2006 | 300044510 | KWEEN B
Single screw repelletizing line. Degassing: Double Vacuum degassing Screen changer before degassing: Double cylinder type Material feeding system: Conveyor belt Sesotec metal detector Extruder hopper type: Agglomerator/Cutter Compactor – Extruder combination Pelletising system: Hot...
2016 | 300046632 | POLYSTAR
Single screw repelletizing line. Blade granulator 44/80 Forced feeding system CF 190 Filter Changer Die cutting TT/20 Centrifuge tank CE200 Centrifuge CE200/G Vibrating screen 340x1000 Launching fan Silo 7mc...
2009 | 300046551 | CDM ENGINEERING
Single screw repelletizing line. grinder: 20 kW...
1996 | 300039468 | PREALPINA
Single screw repelletizing line. Suitable for recycling PE scrap Conveyor : 1 x Belt Conveyor 6500mm (L) x 900mm (W) ; 0.75kW 1 Metal Detector with single coil Roll Feed : 1 Reelfeed 0.75kW ; 500mm (W) Extruder : 1 OMEGA 105 Hydrocool • S7 Siemens Control System and components ...
2013 | 300042300 | PLASMAC
Single screw repelletizing line. Material : LDPE / LLDPE / mLLDPE / PIB / Glue Output : 370 - 450 Kg/h Scrap Form : Loose, slabbed, lumps and reels No Printed material Omega Plus Extruder Venting System: dual vacuum system Gravimetric feeder min 0.3kg/h -max 20 kg/h Single phase ho...
2020 | 300045920 | PLASMAC
Single screw repelletizing line. Machine in production, trial possible. Screw diameter: 105 L/D: 32D Output capacity: apox. 400 kg/h. Materials: PE/PP Motor AC, main drive power: 132 kW Working hours: 120.140 h Screen changer: YES CE Certified Machine manuals available....
2002 | 300046440 | ARTEC
Single screw repelletizing line. Feeding silo for the grinded film Forced feeding hopper prepared for connection to the extruder Extruder 130/37 D with degasifier 185 KW direct current motor 6 heating zones Hydraulic screen changer, diam. 220 mm Frequency inverter Water head cutting...
2000 | 300038181 | TECNOVA
Single screw repelletizing line. Working hours: 60704 Output: 350-480 kg/h Conveyor belt with metal detector Double degassing Grinder SG 20 Screen changer with continuous partial area backflush filter with two carrier pistons (4 screens) for medium contaminated polymers. Low pressur...
2009 | 300046501 | EREMA
Single screw repelletizing line. Working hours: 50677 Output; 350-480 kg/h Double degassing Conveyor belt with metal detector Grinder PRIMO 100 S Laser FIlter LF1/350...
2010 | 300046499 | EREMA
Single screw repelletizing line. Forced feeding silo Screw length: 5m Drive motor: 160 Kw Cylinder heating power: 70 Kw No. cylinder heating zones: 7 No. heating zones (filters, head, die): 4 Heating power: 16 Kw Double filtering system Conventional filter diameter 200mm Cutting hea...
2000 | 300045955 | EUROTECNO
Single screw repelletizing line. Recycling machine for PET (non food grade) and PE Material Output: PET / PE printed films (12pm PET + 30pm PE) Origin:post industrial , Moisture:dry (<1%), Contamination: clean, Surface treatment: PET Thermoforming flakes, washed post-consumer m...
2022 | 300046715 | NGR
Single screw repelletizing line. Output: Up to 650 kg/h, depending on the type of material and feeding rate Conveyor belt FB 7000 1100 SH Double layer Metal Detector Intarema Process Combination: I 1310 TVEplus Control package Intarema -automatic load detector -load control cutter/c...
2015 | 300046400 | EREMA
Single screw repelletizing line. Conveyor belt - Lenght 7 m, Widht 900 mm Drive 0,55 kw Cutter- Extruder Combination Artec 125 V with simple degassing Screw diam. 125 mm Scew lenght: 6,4 m Motor drive 160 Kw Heating capacity cylinder: 49,8 kW Heating zones cylinder: 5 Manuel Scree...
2000 | 300043759 | ARTEC
Single screw repelletizing line. Installation year 2018 Processed material PET 800-1000 kg/hr Material: Fibres. Origin of material: Industrial waste (recycler) Belt Conveyor FB_10000_1200_SH with Double Layer All Metal Detector INTAREMA® Process Combination 1714_TE Including shock...
2017 | 300045903 | EREMA
Single screw repelletizing line. Cascade extruder Material that can be processed: LDPE, LLDPE Screw diameter: 160 mm L/D ratio: Extruder one: 25 Extruder two: 30 Double degassing Screen changer before degassing: Laser sheet perforated continuous filter Erema LF 2/350 Screen changer...
2004 | 300045579 | EREMA
Single screw repelletizing line. Complete line PET recycling line for food grade. Only 300 working hours. BB-ES Big Bag emptying station for big bags of the size 1000 mm x 2500 mm Brand Eisbar CR-DR1200 Crystallizer and dryer for PET Flakes GDS 1200 mm; Brand Eisbar,Output 1200 kg/...
2022 | 300046730 | NGR
Single screw repelletizing line. HDPE : 900-1200 Kg/h LDPE/LLDPE : 1000-1300 Kg Conveyor belt FB_10000_1200_SH Inner width of the belt : 1150 mm Usable conveyor length : 9900 mm Max. load by conveyor belt : 200 kg Drive power : 1.5 kW Belt speed : 4.7 m/min Weight with metal detect...
2014 | 300045628 | EREMA
Single screw repelletizing line. Regeneration plant with water head cutting for PE/PP/PS 8mm diameter screen Print max. 50% - humidity max. 3 Film silo, capacity 2mc Forced feeding Extruder 60 LD 35 with degassing Vacuum pump for degassing DC motorization Temperature control panel ...
2016 | 300045999 | TECNOVA
Single screw repelletizing line. Cold system granulator Exact Evolution Work speed: up to 150 m/min Cutter wheel diameter: 180 mm Cutter wheel 24 blades Includes hopper and piping (see attached photos). Forced feeding unit available (ask for quotation)...
1999 | 300046302 | EXACT
Single screw repelletizing line. Consisting of: RM combination RM-63 with cutter compactor Reel Feeder RZ 60/80 Hot Die Face cutting system HG 82 Pellets Dewatering screen GS1500 Fan dryer GGT 75 Granulate conveyor unit FRL10...
2003 | 300045722 | EREMA
Single screw repelletizing line. The machine enables the processing of thermoplastic waste, especially film, fibres, foamed material as well as pre-ground hygroscopic material and flakes from washing lines. The final product is uniform, melt filtrated and dry pellets. Material to b...
2015 | 300045797 | STARLINGER
Single screw repelletizing line. Machine in production, trial possible Screw diameter: 65 Materials: PE/PP L/D: 38D output capacity: around 200kg/h Motor: AC Main drive power 37 kW screen changer: yes working hours: aprox. 120.000 h. CE Certified Machine manuals available the line i...
2002 | 300046442 | ARTEC
Single screw repelletizing line. Screw diameter: 100 mm Output: Up to 650 kg/h, depending on the type of material and feeding rate Double degassing Screen changer before degassing: Backflush double piston screen changer SW/RTF with fully automatic self-cleaning system Material feedi...
2011 | 300046119 | EREMA
Single screw repelletizing line. Material : pet flakes, sheet and PET preform shredding Complete line with: Big bag discharge system through hoppers to feed directly to the extruder or go through a previous drying process IRD Material drying system. Continuous heating, crystalli...
2001 | 300043433 | EREMA
Single screw repelletizing line. Recycling line for PE and PP composed by - Conveyor Belt with Metal Detector - Roll Feeder (Maximum receiving capacity 750 kg/h) - Combined dosing unit for additives (granules/powder) - Shredder-Feeder-Extruder Combination Shaft width: 1400mm Feedin...
2015 | 300045524 | NGR
Single screw repelletizing line. LLDPE, LDPE 1300 -1600 kg/h Moisture max [%]: < 6 Thickness [μm]: 10 - 200; MFI [g/10min]: 0,5 - 3 [2,16kg/190°C]; HDPE, MDPE 1000 - 1400 kg/h Moisture max [%]: < 6 Thickness [μm]: 10 - 200; MFI [g/10min]: 0,3 - 3 [2,16kg/190°C]; Belt Conveyor FB_1...
2014 | 300045983 | EREMA