Mechanical Dryer / Centrifugal Washer. Has only 100 working hours. Is sold since is not suitable for their process
Screen basket diameter 900 mm
Working length 1450 mm
Screen perforation (standard) 2,5 mm
Through up to (t/h): Rigid plastics 2,5, Films 1
Height with Open Mouth is 3,7m
Can be used for Agricultural film , PET bottles , Battery boxes , HDPE material
This unit can be used as a dryer or as an dry intensive washer. The mechanical dryers operate as a centrifuge for film, regrind and mixed plastics. The wet fractions and the fines are mechanically dried in this centrifuged dryer and at the same time the contaminations are removed by the high impact energy and then will be evacuated.
As an intensive washer, this unit uses a high volume of water to remove contaminates such as paper labels (pulp) from the fraction. For the washing of the flakes, there comprises a housing in which a special high-speed agitator rotates, a polygon shaped screen basket made from stainless steel, double outboard bearings, mechanical cleaning device for the screen surface pneumatically operated with additional rinsing device. Models T 508-T 2015 (Rotor and housing is in mild steel, housing inside is special protected by 2K paint). Rotor wings at the ends are fitted with bolted wear plates. The feedstock that has contaminates or a high percentage of paper, an automatic mechanical cleaning scraper is used on the exterior surface of the screen drum.
Special features:
-Considerably higher drying efficiency due to an optimized paddle-shape and position.
Up to 50% higher drying performance with films compared to former rotor generations.
-Better access; even the preceding dryers already were equipped with hingeable housing covers; the covers of the new generation 1016 and 2016 can even be hinged open on tow sides. A total removal of the housing cover with the help of a fork truck or a crane.
- Better anti-wear protection for the screens.
-Better anti-wear protection for paddles. Our standard paddles are made of an wear-proof material. For particularly abrasive materials there a re paddles with a welded-on anti-wear protection.
- The standard version of our housings (starting with
size T 1015) is galvanized, no corrosion problems.
-For materials with bad flowing properties there are dryers with forced feeding via screw bunkers.
Composed of:
1-Material conveying blower type MFT 55/500 with drive motor 11 kW,cyclone separator with frame
2-Screw conveyor unit. For uniform feeding from dry cleaner
L approx. 5000 mm
D approx. 300 mm
3-Dry cleaner T 1015
Consists of the cabinet, a rotor, a polygonal screen basket made of stainless steel (unhardened),double, external bearings; replaceable wear plates on the rotor blades.
screen basket diameter: 950 mm
working length: 1400 mm
screen perforation: 2,5 mm
Drive: 55,0 kW
4-Platform and steel structure for dry cleaner
For the purpose of elevation of the dry cleaner, necessary steel structure with platform and access stair
5-Auxiliary blower
Material conveyor blower type MFT 18/180 with drive motor 1,5 kW
6-Discharge screw with rotary valve 315/480
L approx. 4000mm
D 150mm
More information
