Used CNC Routers for sale

Flatbed CNC 3-axis, for acrylic thermoforming table size 3050 x 2050 Sinumerik control spindle 7.5 KW, 8-axis changer Complete machine with 8 collets, vacuum pump, handwheel and 2 PCs with alphacam 2017 R1 programme and Eurocut with Dongl control cabinet. The CNC was serviced 2 years ago for 7000 euros, as was the vacuum pump. The programs and PCs were 6000 euros.

The absolute travel distances are approx. 1550 x 2600 x 850 mm Rapid traverse of the system in X/Y - up to 60 m/min, in Z-30 m/min, in A-axis 9000°/min, C-axis 18000°/min. Rotary axes with preloaded bearings, maintenance-free - Max. Rotation range 540°, - Max. Max. swivel range of the milling unit 365°- Total table surface : approx. 1100 x 2000mm 5006 Jäger spindle HF Z 80 with tool changing system / 13-fold with servo motor Milling spindle 2.8kW/40,000 rpm, ceramic bearings WK 19 Automatic door units CNC software module for NUM

MAKA Universal 4-axis milling and drilling machine. Control: BWO 920, RAM 1MB Working range: X-axis 2000 mm / 45 m/min Y-axis 6000 mm / 45 m/min Z-axis 250 mm / 24 m /min milling motor: HSK63 water cooled, max. 12 kW speed 24.000 1/min tool changer: Chain tool magazine 12 places travelling on the outside of the portal. 3 places set up for angle heads. Equipment: - 10 support crossheads + supports - 2 clamping circuits for alternating operation - pneumatic lowerable stops - slide rails - 2 vacuum pumps - cooling spraying system - overhead drag chain - to be loaded on both sides - automatic. central lubrication - special aggregates, angle drill, milling head

Operating hours as of November 2024: Duty cycle: 53,450h Spindle running time: 14,265h Last spindle replacement at the end of 2019 with 11899 spindle hours Running time of the current spindle 2,366h Last maintenance 12.02.2024, documents available Paths, cube size, table size: 2 clamping tables Cube size 1,500 x 1,500 x 650 mm Swivelling angle A-axis +/- 270° B-axis +/-100° BWO 910RC control unit HSD spindle HSK F63 milling motor, water-cooled, 24,000 rpm, 7.5 kW 10-position tool changer, HSK F63 Accessories: Vacuum pump, safety cabin front and left, switch cabinet, central lubrication, Available from approx. Jan. 2025

The VPC U with 1-axis tilting head and rotary table for full machining of workpieces in one single clamping Currently is used for Aluminium parts milling The milling and turning centre VPC U/T is ideal for the 5-side processing of large and complex workpieces in one setting. Changing between two tool holding systems is just one of the outstanding features of this machine. The additional turning tool holder beside the working spindle enables the pick up of the turning tools whilst the tool holding system of the main spindle is reserved for the drilling and milling tools. Tilting spindle: - 1-axis tilting spindle swivelling around the Y-axis (B-axis) - Hirth-coupled construction, stepless positioning or interpolating - Tilting range 0° to -90° Rotary table: - Continuous turning NC-rotary table around the Z-axis - Integrated in machine bed - Hydraulic clamping Main spindle drive speed: 6000rpm Main motor: 30kW Mold change warehouse: 22 Options: 36,60,110 Changing time: approx 6 seconds Exhaust air blower not included