ADLER-BUZZI - A90S
Skeletal granulators. Sheet material 1-2mm Electrical requirements: 3 Phase / 32A Output capacity kg/h : 50-800kg/h Input throat width : 900mm Input throat height : 1500mm...
2015 | 300045663 | ADLER-BUZZI
More information
Used Auxiliaries and Peripherals
Looking for a used Auxiliaries and Peripherals? Visit us to see our selection for sale!. Skeletal granulators, CNC Routers, Preheaters, Molds, Trim presses Adler-Buzzi, Axa, Belotti, Bzt, Geiss, Hardinge, Huber & Grimme, Illig, Maka, Omg, Rapid, Cms
More information
AXA - VPC 40 U
CNC Routers. The VPC U with 1-axis tilting head and rotary table for full machining of workpieces in one single clamping Currently is used for Aluminium parts milling The milling and turning centre VPC U/T is ideal for the 5-side processing of large and complex...
2002 | 300045907 | AXA
More information
BELOTTI - RPA-2517
CNC Routers. X axis, longitudinal movement 2500 mm, speed 40 m/min Y axis, transverse motion 1500 mm, speed 40 m/min Z axis, vertical motion 800 mm, speed 15 m/min A-axis, rotation around vertical axis 360º, 180º sec B-axis, rotation cutting unit 315º, 180º sec...
1999 | 300045129 | BELOTTI
More information
BZT - PFB 3020-G Gantry
CNC Routers. With the milling machine you can mill all kinds of plastics and aluminium for mould making. 5-axis gantry milling machine BZT-PFB 3020-G Gantry - Travels for 3-axis operation: X - axis 1835 mm speed max 16 m/min Y - axis 3410 mm speed max 16 m/min ...
2016 | 300044137 | BZT
More information
GEISS - 840 c
CNC Routers. Siemens840 C controller...
1993 | 300038371 | GEISS
More information
GEISS - FZ 2000 x1000
CNC Routers. Travel / Speed / Acceleration X axis : 2450mm / 120000mm/min / 7000mm/s2 Y asis : 1400mm / 100000mm/min / 7000mm/s2 Z axis : 800mm / 60000mm/min / 1200mm/s2 B axis . 285º / 14275º/min / 1200 º /s2 C axis : 520º / 21600º/min / 1200º/s2 Milling spin...
2000 | 300043382 | GEISS
More information
GEISS - 2000x1000
CNC Routers. Travel / Speed / Acceleration per axis : 30.000 mm/min Air requirements.. 1 line @ 80PSI Another 5 axis GEISS (year 1995) available for spares or repair (not included)...
1997 | 300044343 | GEISS
More information
GEISS - FZ 2600x2250 LIN
CNC Routers. Axis path / Speed / Acceleration X axis : 2350mm / 180 000mm/min / 15 000 mm/s2 Y axis : 2650mm / 180 000mm/min / 7500 mm/s2 Z axis : 130mm / 70000mm/min / 7000 mm/s2 C axis : 365º / 20880 º/min / 5400 º/s2 Total power requirement: 60,72 kW Maximum...
2016 | 300046197 | GEISS
More information
GEISS - LN 2000 x 1000
CNC Routers. Geiss CNC milling machine LIN 2000 x 1000 Travel / Speed / Acceleration X-axis: 2450mm, 120000mm/min, 7500mm/s2 Y-axis: 1400mm, 120000mm/min, 7500mm/s2 Z-axis: 800mm, 60000mm/min, 1200mm/s2 B-axis: 210º , 14275 º/min, 1200 /s2 C-axis: 520º, 1800 º/...
2001 | 300046713 | GEISS
More information
HARDINGE - T-51
CNC Routers. Hardinge® T-Series SP® turning centers are the recognized market leader in Super Precision and hard turning applications. Designed to produce the most challenging parts in the tool industry, T-Series machines are ideal for two axis high-precision ma...
2015 | 300045027 | HARDINGE
More information
HUBER & GRIMME - HG 1400
CNC Routers. 5 axes Working area : 920x1400x580 Machine equipped with a spindle capacity 2 tools. Displacements (mm) : X = 920 Y = 1400 Z = 580 A = endless B = endless Maximum 3D working range per table approx. 1000x780x400 Linear motion paths approx. X,Y,Z,...
2002 | 300045343 | HUBER & GRIMME
More information
HUBER & GRIMME - HG 1400
CNC Routers. Still in full use and fully functional. Spindle new from 2022. Operating hours: As of October 2023 approx. 55,000 . Machine has been in series operation for 7 years in one shift and 12 years in two shifts Last audit: According to manufacturer's spe...
2003 | 300046257 | HUBER & GRIMME
More information
ILLIG - VHW 60/2b
Preheaters. Max film width: 610 mm Maximum foil thickness: 2.0 mm Heating roller: 35.4 kW Air heater: 4 kW Max speed: 35 m / min. Max Heat temperature: 140 ° C ...
2008 | 300045111 | ILLIG
More information
ILLIG - RDM 54K 3G
Molds. Diameter: DM75 Maximum cup height: 120 mm Stacking unit The mold has been used on the Illig RDM 54 machine...
2007 | 300046679 | ILLIG
More information
MAKA - PM210X
CNC Routers. MAKA Universal 4-axis milling and drilling machine. Control: BWO 920, RAM 1MB Working range: X-axis 2000 mm / 45 m/min Y-axis 6000 mm / 45 m/min Z-axis 250 mm / 24 m /min milling motor: HSK63 water cooled, max. 12 kW speed 24.000 1/min tool change...
2005 | 300046224 | MAKA
More information
OMG
Molds. Materials: PVC, PS, PET, PP, BOPS. A set of moulds for container production. Dimensions: 227х178х40 227х178х70 Also included in the offer: Frame Cutting tool Stacking unit These moulds were previously used in production on OMG lines (OMF\PVE 52 P...
2008 | 300038521 | OMG
More information
RAPID - GK2060-KURF RFL60
Skeletal granulators. Standard Rapid granulator whitch is special developed to oprerate inline with a thermoforming machine. Inside the hopper there is build in a dancer for controlling the skeleton under production. Complete with electric control and transport ventilator...
2011 | 300039793 | RAPID
More information
CMS - ATHENA 30 15
CNC Routers. Materials: PS-ABS-PMMA-PC-PP-PSPE-COMPOSITE-WOOD-ALLUMINIUM-RESINS X axis 3050 mm, speed 90 m/min Y axis 1525 mm, speed 60 m/min Z axis 800 mm, 40 m/min C axis 540º (270+270), speed 80º/s B axis 240º (120+120), speed 90º/s...
2008 | 300045758 | CMS
Sold
More information
CMS - NC-ATHENA 30-15 CX5 8,5 KW
CNC Routers. -axis: Gantry driven on both sides. Y-axis: Traversable carriage mounted and guided on the X-traverse. Z-axis: Support mounted on the Y-slide to which the machining unit is attached. The Z-support is equipped with an automatic system that blocks the...
2022 | 300045731 | CMS
Sold
More information
GEISS - DU 4000 x 2000 FZ
CNC Routers. Used only for test (Aluminum, wood, plastic, metal processing) X axis 4400 mm Y axis 2400 mm Z Axis 780 mm B axis 210' C Axis 520'...
2014 | 300039074 | GEISS
Sold
More information
GEISS - 2000 x1000 ECO
CNC Routers. The spindle was renovated in Q4 2023 and also completely remeasured. Travel / Speed / Acceleration X axis : 2450mm / 120000mm/min / 7000mm/s2 Y axis : 1400mm / 100000mm/min / 7000mm/s2 Z axis : 800mm / 60000mm/min / 1200mm/s2 B axis . 285º / 14275...
2004 | 300046330 | GEISS
Sold
More information
ILLIG - ZSM45
Trim presses. Motor: 0.55kw/1.5A Max cut width: 450mm Max. cut length: 500mm Max cut heigh: 120mm...
1970 | 300036483 | ILLIG
Sold
More information
- Auxiliaries and Peripherals
- CNC Routers
- Molds
- Preheaters
- Skeletal granulators
- Trim presses
- Complete thermoforming sheet extrusion lines
- Offset Printing Machines
- Cup printing machines
- Lids printing machines
- Processing Machines
- Blister and Skin
- Thermoformer
- Sheet extrusion lines
- Sheet coextrusion lines
- Sheet monoextrusion lines