SCAE DIMATIC ETH 201 PB/66 del 2014 usata in vendita

Scheda Tecnica: SCAE DIMATIC ETH 201 PB/66 Usato

Rif.: 300033728

Marca: SCAE

Anno: 2014

Altri Dati:

MACHINE INSTALLED BUT NEVER USED FOR PRODUCTION (ONLY SAMPLES WERE PRODUCED ON THIS MACHINE)

Mechanical speed (without film): 240 cycles/minute*
Bag width (draw length): 50 - 400 mm (1.97’’ – 15.75’’)
Bag height: 100 - 550 mm (3.94’’ – 21.65’’)
Line speed: 10 - 90 m/min (32.8 – 295.27 fpm)
*Effective output: depending on bag specifications, thickness and quality material, dimensions,
printing repetition, static charging and number of bags for bundle


DIMATIC ETH 201PB/66 2 and 3 SIDE SEAL Servomotors –
Right hand execution in web flow direction
For production of side gusseted bags from a film roll of PET/PE - PE/PE and mono-PE material
Features of the machine:
• N. 2 Servo driven draw rolls for film index to control the film tension during the sealing
• N. 4 Servo driven sealing bar with independent dwell time adjustment for cross and longitudinal sealing
• N. 2 Servo driven water chilled bar for cooling down the cross sealing
• N. 1 Servo driven flying knife cut
• Infeed section(nip roller or capstan roll) driven by AC motor to take the film at constant speed; the rolls can be opened/closed with a pneumatic switch and independent air pressure control (left/right)
• Pneumatic dancer
• Air cushion bags delivery with air fingers at film index nip
• No. 3 sockless antistatic bars
• No. 1 photocell for print length registration
• Safety guarding
• Automatic stacking table with belts driven by AC motor; conveyor length 1500 mm with inclination adjustment
• Multilingual color touch screen control panel displays machine parameters, alerts operator with alarm and error messages; can be used for bookkeeping and production reporting
• The machine is complete with modem for tele-assistance in order to allow a remote diagnostic and efficient feedback/updates
• Electrical control panel equipped with air heat exchanger to maintain constant cabinet
Temperature

Servo driven unit for cross wide/pouch sealing (all units are mounted on linear guides for fineadjustment and positioning)

E7-SEAL/SM - Servo-driven cross sealing unit
- Each unit is independently driven by servo drive
- The sealing head is in special aluminum
- Upper sealing bar movable by pneumatic cylinders with air pressure control
- Lower sealing bar is fix during the working cycles and moving in rest position to let a cooling plate to enter between the sealing head and the material
- 3 heating zone cartridges for upper and lower sealing bar
- Sealing length 600 mm
- Sealing width 10 mm
- Sealing pressure up to 1.500 KG


E7-RAF/SM - Servo driven chilled water cooling unit
- Chilled water’s cooling unit to press and cool the wide sealing achieved from the cross sealing stations

Servo driven unit for longitudinal wide/pouch sealing (all unit are mounted on linear guides for fine adjustment and positioning) and zipper sealing

E7-SEAL/SM - Servo-driven longitudinal sealing unit for the bottom seal and zipper sealing
- The unit is independently driven by servo drive
- The sealing heads are in special aluminum: n.2 twin/double seal for zipper and n. 1 longitudinal sealing
- Upper sealing bar movable by pneumatic cylinders with air pressure control
- Lower sealing bar is fix during the working cycles and moving in rest position to let a cooling plate to enter between the sealing head and the material
- heating zone cartridges for upper and lower sealing bar
- Sealing length 200 mm
- Sealing width 10 mm
- Sealing pressure up to 1.200 KG

E7-RAF - Chilled water cooling unit driven by the same servo of the sealing unit
SVLG/ZIP - Motorized unwinder for n.2 zipper profiles with insert guide

Central driven unwinder for two rolls and slit/triming
BP.2 - Double central driven unwinder
Central driven unwinder for automatic tension control during acceleration and braking according to variations in roll diameter and linear speed
The unwinder is complete with:
- n. 2 Pneumatic dancer
- n. 2 air shaft for cardboard cores: range of expansion 74-76 mm (2.9” - 3.0”) - The shaft is in
aluminum with safety clutches
- n. 2 Optical sensors for minimum diameter and stop switch for web break and reel-end
- n. 2 Ultrasonic sensor for edge guide system (FIFE)
- Reel diameter: max 600 mm
- Unwind width: max 600 mm
TRIM/LG - Longitudinal slit/triming cutting unit and rewinder
- No. 2 cutting units
- No. 2 trim spool rewinders

Hole die cut for handle hole with different shape
MAK- Electromagnetic punching unit that works on the side of the film direction for handle cut
- Adjustable in cross and longitudinal direction
- Included tear-notch diet cut
- Collector of the scraps

In July 2015 they installed an ultrasound system to fuse the zipper on the side of the pouch that results in a perfect lateral seal.
150 cycles per minute with zipper, 300 bags with double line. Without zipper 200 - 220 cpm or 400 - 440 pouches per minute