TECHNE 15000 SN (Coex 6 Layers - 6 Cavities) de 2007 d'occasion à vendre

Fiche technique: TECHNE 15000 SN (Coex 6 Layers - 6 Cavities) d'occasion

Ref.: 300034125

Marque: TECHNE

Année: 2007

D'autres caractéristiques:

TECHNE SYSTEM 15000-SN

Single Shuttle Extrusion Blow Moulding Machine equipped with Coex 6-Layer 6-Cavity head suitabe for processing HDPE.
Cavities centre distance: 107,5 mm.

"TECHNE" Die Head

Microprocessor control unit with TFT colour screen.

Extrusion Platform with:
2 Extruders 70mm diameter, 25 L/D comprising
1 Extruder 45mm diameter, 25 L/D comprising
1 Extruder 30mm diameter, 25 L/D comprising

2 Extruder Screws 70mm diameter 25 L/D, nitried and ground with double helix profile (BARR)
1 Extruder Screw 45mm diameter 25 L/D, nitried and ground with double helix profile (BARR)
1 Extruder Screw 30mm diameter 25 L/D, nitried and ground with double helix profile (BARR)
1 Coex 6-Layer Extrusion Head connected to the Extruder Flange with heat sleeve comprising (6 cavities)

1 Parison Knife with Cold Front Blades

1 Power Stabilizer (+/- 15%) range of 360V to 460V based on current power supply of 415V / 50 Hz.


Included Options:

1 manual Vertical Screen Changer with Interchangeable mesh and filter for extruder 70mm diameter.

1 Anti-Static Device for Parison Stabilization

1 Set for external Parison Adjustment (6 screw cardans)

1 Quick Mould Change

1 Modem Card for the connection of the TTS Service


Ancillaries:

Granulation System suitable for milling scraps and full bottles production, mainly composed of:
1 Belt Conveyor for scraps and bottles transportation (to be placed at the blow moulding machine outlet)
1 Belt Conveyor for scraps and bottles transportation for grinder inlet
1 Silenced Grinder complete with electric control panel
1 Silenced suction system for recycled material complete with ventilator, vertical filtering bags, cyclone for air/material
1 Hopper for recycled material storage

Material Feeding System for Virgin, recycled material and masterbatch feeding. Mainly composed of:
1 Drier for virgin material
1 Drier for recycled material
1 Drier for adhesive material
1 Dehumidifier for EVOH material
1 Extruder feeding equipment for external layer
1 Extruder feeding equipment for internal layer
1 Extruder feeding equipment for mid layer
1 Extruder feeding equipment for adhesive layer
1 Extruder feeding equipment for EVOH layer

1 Piping and vacuum station for material conveying from storage to driers and to the Blow Moulding machine

Dehumidification System for the air feeding of the dehumidification hood placed on the forming zone of the Blow Moulding machine, composed of:
1 Air Flow pre-treatment station
1 Dehumidifier MUNTERS, Model: MLT 1400

1 Dehumidification Hood

The air compressor is an Atlas Copco model GA45VSDAFF complete with filter and 1500ltr tank at 11bar

The machine has about 10000 hours of operation.