JWELL JWZ - BM 05D
Wytłaczarko – rozdmuchiwarka do pojemników o max. poj. 10 L
JWELL JWZ -BM 05D
Wytłaczarko – rozdmuchiwarka do pojemników o max. poj. 10 L
UNILOY UMS220-D EZ
Wytłaczarko – rozdmuchiwarka do pojemników o max. poj. 10 L
BLOWMOLDING BM 5000-D elettrica
Wytłaczarko – rozdmuchiwarka do pojemników o max. poj. 10 L
JOMAR EBM 6-D
Wytłaczarko – rozdmuchiwarka do pojemników o max. poj. 10 L
Ref.: 300035198
Marka: AKEI
Rok: 2005
Inne specyfikacje:
AKEI LIN-70-TS BLOW MOLDING MACHINE
- Technical parameters
Screw diameter: 70 mm
screw ratio (length / diameter): 24:1 L / D
screw speed (50Hz): 9 ~ 58 rpm
extrusion capacity (PE): 85 kg / h
barrel heating zone: 4-zones
Toggle Stroke: 460 mm
Clamping Stroke: 120 mm × 2
clamping force (160 bar): 12.5 Tons
Dry cycle: 2.8 s
glue embryo thickness control: 100 points
Cooling water consumption: 1.5 ~ 2.5 m ^ 3 / h
of compressed air Dosage: 1.5 ~ 2 m ^ 3/min
Machine weight (approximate): 15 Tons
- Power consumption parameters
inverter motor: 30 kW
screw heating section (PE): 14 kW
hydraulic drive motor: 22 kW
of heating zone: 7.65 ~ 11.4 kW
Max Power Distribution: 73.65 ~ 77.43 kW
average power consumption: 51.55 ~ 54.2 kW
- Product Description
* Control Systems
American brand control system.
15 "color screen display operation.
Closed loop control mode shift action.
Show and modify heating temperature, preheat value, high and low temperature alarms.
Timing can be preset heating.
Show the location and modify all settings, time settings, and operating status, etc.
Apparent mechanical automatic cycle time required.
All actions prevent warning system.
Show all alert information, causes, history, and modify records.
Show external switch 96/96 output input status.
Level password settings.
A 3.5 "floppy disk drive for easy replacement procedures.
* Extrusion head
Nose ring set with 3:00 adjustment cup design.
Up to 10 double coextrusion die.
In addition to static devices rod cylinder.
100 points thickness control, equipped with Italian brand servo cylinder.
* Rack design
Clamping force line in the template to ensure that the average force.
Shift mode and clamping action are in the German brand T-rail linear bearings pan.
Can be equipped with electronic ruler should not touch, low wear rate, to ensure accuracyand extend the productive life of.
* Hair System
All hair Block actions are proportional hydraulic drive with a U.S. brand.
Hair seat with interchangeable T board, 3:00 adjust hair stick, hair oblique angle adjustable.
German brand three-step scale and quick exhaust blowing.
* I material handling systems
Proportional hydraulic valve control all go I expected action.
Products were down more than expected by pre-cooling system.
I expected the cold climate and finished cooling device.
* Product Export System
Robot to take the bottle unit.
The finished upright flat on the conveyor belt.
German and Japanese brand pneumatic control.
* Finished conveyor system
Flat circular conveyor belt products.
Machine at the end Pei outlet conveyor belts transported to scrap machine.
* Aerodynamic configuration
Independent German brand control valve cylinder pressure, vacuum pressure, hair air pressure, air pressure, and I expected cold cold needle pressure.
Fast Li Tude country brand pneumatic control.
Japanese brand pneumatic cylinder.
Three-step scale blowing and exhaust.
* Circuit Configuration
Japanese brand inverter.
American brand continued electrical.
* Hydraulic system
American designer variable hydraulic pumps, hydraulic valves and accumulators.
Closed-loop proportional hydraulic circulation system.
Equipped with proportional valve, adjustable speed and pressure ratio.
* Lubrication system
American brand controlled lubrication system.
Potrzebujesz porady?
Poprowadzimy Cię przez cały proces kupna i sprzedaży maszyn używanych w zmieniającym się i złożonym środowisku międzynarodowym. Nasze zespoły ds. sprzedaży, logistyki, prawa i marketingu będą Ci towarzyszyć przez cały proces, aby był on łatwy i wolny od ryzyka.