Used WICKELTECHNIK WFZ1.105152 of 2005 for sale

Data Sheet of Used WICKELTECHNIK WFZ1.105152

Ref.: 300035691

Brand: WICKELTECHNIK

Year: 2005

Other Specifications:

commissioning: 2006

Working width: max 1530 mm, min. 1400 mm
Material to be processed: - Paper and Paper laminates up to approx. 250 g / m2
Here predominant: metallised Paper 70 g / m2
Slitting width: Re-reeling process with edge trim
(2 x max. 30 mm) or additional centre cut
Machine speed: 500 m / min
Acceleration: ± 0,166 m / s2

Unwinder
Parent roll diameter: max. 1050 mm
Parent roll core: Cardboard cores with 6“ l. W.
Unwind system: shaftless unwind with lift-in device and automatic material web
control
Slitting system: Scissor cut with bottom knife shaft and top knife shaft


Rewinded
Finished roll diameter: max. 1050 mm
Finished roll cores: Cardboard cores with 6“ l. W.
BST lateral control system
Photoelectric cell - photoelectric scanning
Edge trim suction
Rewind system: with expansion compatible winding shaft (centre drive) and contact roll

Finished roll take-up carriage:
The machine is equipped with a finished roll take-up carriage for the removal of the finished roll out of
the machine as well as the transport out of the machine area. The carriage is driven by rail, with hydraulically
operated scissor lifting table as well as hydraulically operated tilting station.
The carriage is designed for the following technical data:
Roll weight: approx. max. 2500 kg
Roll diameter: max. 1050 mm
Roll diameter: min. 300 mm
Web width: max. 1550 mm
Carriage width: max. 1900 mm

Drive side: on the right, seen in direction of material run
Operating side: on the left, seen in direction of material run
Drive system: - disk brake at the unwind
- three phase current motor for centre drive at the rewind
Machine installation: the machine stands in a climatic room 22°C

Machine data
Electric power supply: ca. 40 KVA
max. series fuse: 100 A
Mains voltage: as per DIN / IEC 38
3 x 400 V + /- 6 % / - 10 %
(3 x 380 V + 11 % / - 5 %)
Frequency: 50 Hz ± 2 %
Control voltage:
Contactors: 220 V AC / 24 V DC
PLC - control: 24 V =
Signal lamps: 24 V