Used DOLCI FCL 15/S of 2007 for sale

Technical Specifications:

---

• Layers no.: 3
• Web Width: 1500 mm

Other Specifications:

---

FULLY AUTOMATIC 3-LAYER CAST FILM LINE FOR STRETCH FILM


Materials: Resins : C4, C6, C8, metallocene, VLDPE, from Dow, Exxon, Polimeri Europa, Basell (other resins subject to approval)
Film Width (Max): 1500 mm
Output Capacity: 750 kg/h
Number Of Extruders: 3
Film Thickness (Min): 0,02 mm
Film Thickness (Max): 0,04 mm

WITH GRAVIMETRIC FEEDING, AUTOMATIC DIE AND ROBOTIZED WINDER
Net film width: 1500 mm (3 x 500 mm.)
Resins : C4, C6, C8, metallocene, VLDPE, from Dow, Exxon, Polimeri Europa, Basell (other resins subject to approval)
Products: coextruded Stretch film and food wrap (cling) film, 3 layers
Film useful max. width: 1500 mm (net after trimming)
Mechanical line speed: 400 m/min max
Min. and max reel diameter:200 - 500 mm
Output from 600-750kg/h

Layers percentage distribution:
A 20% B 60% C 20%
A 15% B 70% C 15%

EXTRUDER
Diam. 55 mm ,140 mm, 55 mm
L/D 1:30. 1:32, 1:30

CORES 2" and 3" inches possible

AUTOMATIC EXTRUSION DIE AND 3 LAYERS FEEDBLOCK MODEL NEXTRAFLOW 3/2000
Lip slot width : 1950 mm

ELECTROSTATIC CHARGING DEVICE (edge pinning)
Including 2 electrostatic chargers to control the "Neck-in" effect and keep film width constant.

AUTOMATIC THICKNESS CONTROL SYSTEM (INFRARED)

AUTOMATIC CONTACT WINDER MODEL ROBOT-WIND 1500/3B, FLAT BED WITH INTEGRATED ROBOTIZED SHAFTS HANDLING SYSTEM, GLUELESS CHANGEOVER IN SPECIAL EXECUTION (REVERSED) TO HAVE THE STICKY SIDE OF ROLLS ON THE EXTERNAL SIDE

·Robotized shaft handling system with built-in carton cores storage, operating according to following sequence:
·Automatic positioning of robotic arm
·Air exhausting
·Shaft slip-out from the reels
·Shaft supporting and back moving to the carton storage area
·Set of carton cores dispensed onto the supporting cradle
·Shaft slip-in into the prepared carton cores
·Shaft inflation
·Shaft positioning into the park area
·Carton cores storage table on left side of winder with “pusher”
·N° 3 light alloy expansible shafts.
·Electrostatic charging bar for carton cores
·Built in control panel with push buttons, operator interface and Siemens PLC

EDGE TRIMS IN-LINE REPROCESSING SYSTEM, Model FT 150/R90

MULTIPLE AND LATERALLY GRAVIMETRIC DOSING SYSTEM CONTINOUS TYPE FROM INNOPLAST ( GERMANY )
3 gravimetric units on side extruders and three gravimetric units on central extruder for total 9 components, for automatic control of the percentage of each layer and formula (recipe) for each extruder; made in stainless steel complete with system of pneumatic

Other Details:

---

Guarantee: Without guarantee

Current condition: Not running. Can be shown in dry cycle

Voltage: 380 V Triphase
Frequency: 50 Hz
Voltage: 778 Kw

MachinePoint's services:

---