EPS Shape Moulding Machines. The machine is designed for the production of moulded polystyrene foam products. The moulding process is carried out using water steam and a vacuuming process in full automatic mode. Approximate water steam consumption: 450 kg/h (0.15 MPa) Approxima...
2018 | 300044375 | IZOTERM
More information
EPS pre-expanding. Expansion Chamber: diameter: 1100 mm , volume: 1.4m³, useable volume: 0.9 m³ · Production Capacity: 12g/l: 240kg/h, 15g/l: 320kg/h, 20g/l:430kg/h · Density: 12 - 30g/l · Density Difference: around 3% · Room Height requirement: 5m ...
2018 | 300045225 | FANG-YUAN
More information
EPS boiler. Steam Boiler (through Pellet) Steam production: 1500 kg/h Nominal heat output: 1100 kW Steam Class: Dry saturated Max. service pressure: 8 kgs/cm2 Design pressure: 9 kgs/cm2 Test pressure: 15,75 kgs/cm2 Feed water temperature: 80ºC Heating surface: ...
2014 | 300043279 | SINCAL
More information
EPS Shape Moulding Machines. EPS forming machine with mould for the production of U-shaped corners for door packaging With installed mould, it is possible to produce U-shaped corner with the following dimensions: 1000 mm x 60 mm x 60 mm (see photos) Corner wall thickness: 9 mm ...
2010 | 300044379 | IZOTERM
More information
EPS Shape Moulding Machines. EPS forming machine with mould for the production of EPS formwork blocks In one cycle the machine produces 2 blocks open on both sides and 1 block closed on one side (see photos) Block size: 1000 mm x 250 mm x 250 mm Block wall thickness: 50 mm T...
2008 | 300044377 | IZOTERM
More information
EPS Shape Moulding Machines. 7624 hours worked Maximum moulded part size: 2300/1100 mm Maximum moulded part depth: 180 mm Flange - fixed side: 2375 x 1175 mm Flange - movable side: 2375 x 1175 mm Control voltage: 24 V = Energy consumption: ~ 17 kW Operating pressure (pressur...
2007 | 300045154 | ERLENBACH
More information
EPS block moulding. Foam block mould is used for pressing single foam grains into blocks by applying a temperature factor (water steam). Block dimensions including allowance: 3060 mm x 1250 mm x 1050 mm (see photos) Output capacity: 80 m3/h Steam requirements: p = 0,...
2006 | 300044374 | IZOTERM
More information
EPS Shape Moulding Machines. EPS Shape moulder machine Max dimensions: 1395/870 1x Fish crate mould included in the price Mold dimensions L x W x H: 462mm x 278mm x 80 Still in production 2 Units available (PRICE per Unit) ...
2006 | 300044858 | ERLENBACH
More information
EPS Shape Moulding Machines. EPS Shape moulder machine Max dimensions: 1270/870 Still in production...
2006 | 300044861 | ERLENBACH
More information
EPS boiler. Capacity: 3000 kg/h Total volume: 4830 L Maximum allowable pressure: 10 bar Maximum allowable temperature: 184 °C Never used....
2005 | 300045197 | LOOS INTERNATIONAL
More information
EPS Shape Moulding Machines. EPS (Expanded polystyrene) injection forming machine for the production of EPS insulating boards (mold shape) with ship laps in 2,5m x 0,6m x 2cm to 12cm thickness. The machine dimensions are: 4m height x 5,70m length x 4,50m width....
2004 | 300043033 | KURTZ
More information
EPS Shape Moulding Machines. The machine is currently producing: ceiling skirting board (1300 mm х 33 mm х 45 mm) Max. mould sizes (mm): 1612 х 800 х 45 Opening stroke (mm): 1000 Average consumption (kW): 7,5 Moulds are not included Working hours: 39 432 (on 12.02.2024)....
2004 | 300046548 | HEITZ
More information
EPS Shape Moulding Machines. EPS Shape moulder machine Max dimensions: 1510/1200 Seedling tray mold included in the price. Dimensions L x W x H: 524mm x 334mm x 57mm Cavity dimensions in mm: Superior: 22x22; Cavity height 50mm; Dripping hole: 8mm Still in production...
2002 | 300044862 | ERLENBACH
More information
EPS Shape Moulding Machines. Operating voltage: 220/380V 50 Hz Control voltage: 24V Machine stroke: 800 mm Max moulding size: 1510x870 mm Max depth of moulding: 180 mm...
1997 | 300045422 | ERLENBACH
More information
EPS Cutting Line. Type: Packaging machine Max. packaging dimensions: 1000 x 500 x 500 mm....
2020 | 300045078 | GOETTEX
More information
EPS Cutting Line. 2D multi-wire machine for horizontal cutting of EPS and foam rubber produced by Megaplot (Poland). Number of wires for simultaneous cutting (pcs): 10 Maximum cutting block size (mm): 2 500 x 2 500 x 2 000 Minimum width of the sheet to be cut (mm): 1...
2006 | 300045892 | MEGAPLOT
More information