Lignes d'extrusion de monofilaments: OMGM Multyarne de 2016 d'occasion

Fiche technique: OMGM Multyarne d'occasion

Ref.: 300042282

Marque: OMGM

Année: 2016

D'autres caractéristiques:

Extrusión line for PA and PET monofilament of 1-6 mm widht
Production up to 150 Kg/h
Mechanical speed up to 80 mt/min
Machine can processs PP, PE up to 80- 90 Kg/h

Complete line including twister machine LMR-50

Moretto dryer and gravimetric dosing unit
Extrusion model: EX.075.27
Single screw extruder , 75 mm diameter, L/D 32 .
The thermoregulation controlled zones are 12 .
Each zone is equipped with a fan for cooling .
Hopper with cooling circuit .
Circulation pump for gear oil with heat exchanger for cooling water-oil .
Main motor 40 kw ac controlled by full digit inverter.
Adapter between extruder and screen changer with pressure transducer.

Manual filter model MFU.075

Gear volumetric pump model: PU.075.40
The pump is driven by a 2.2 Kw a.c motor frequency

Die head model H.075
N° 1 metering pumps 50 cc
N° 2 kit two outlets conveyor
N° 1 kit two outlet die to produce special profile wire

First heating tank model HVU.450.035
Quenching tank water with two stainless motorized roller Ø 800 x 200 mm .
A.C motor drive 0.55 Kw
The temperature is controlled by a controller with constant recirculation of water .
The range temperature go to 10° up to 80 ° .

Towing back unit model TU.800.020
Stainless motorized roller Ø 800 x 200 mm .
Special nip roller in neoprene rubber Ø 200 x 200 mm .
Up and down command in panel box .
The cylinder is motorized and controlled by PLC program .
Powered by an a.c motor 0.55 Kw keyed in axis with a gear reducer

Dryer tank model DU.50.035
Completely made of stainless steel . Inside are arranged four-blade air for drying wires .
System restoration of reclaimed water
Centrifugal fan with 1.1 kW.

Slow stretching unit model RG.40.020.
The group consists of three cylinders Ø 400 x 200 mm hard chrome plated .
Special nip roller in neoprene rubber Ø 200 x 200 mm .
All the cylinder are motorized by gear and controlled by PLC program .
Powered by an a.c motor 1.1 Kw keyed in axis with a gear reducer

Stretching oven model H.500.020.
Steel frame fully insulated and suitable for operating up to 300 ° .
5000 mm longer .
Heating chamber with forced ventilation and adjustable.
Heating power of 12 Kw. Power of 1.1 kW fan motor

Fast stretching roller model TU.060.020
one cylinders Ø 600 x 200 mm hard chrome plated .
Special nip roller in neoprene rubber Ø 200 x 200 mm .
AC motor drive 2,2 Kw

Embossing unit model : “ EU.015.020.
Bridge structure made of forged steel. The cylinders aren’t motorized and have a shallow incision which corresponds to the
average diameter of the wire. The upper cylinder is moved by hydraulic cylinders.
The adjustment of the penetration is manual. Embossing cylinders made of steel hardened to 60 HRC

Fast stretching unit model : “ RG.040.020 “
The group consists of four cylinders Ø 400 x 200 mm hard chrome plated .
Two special nip roller in neoprene rubber Ø 200 x 200 mm .
All the cylinder are motorized by gear and controlled by PLC program .
Powered by an a.c motor 3 Kw

Over flow tank model CV.400.025
Completely made of stainless steel .
Owner flow stabilization tank with cold water .
4000 mm longer .
The temperature is controlled by a controller with constant recirculation of water .
The range temperature go to 10° up to 20 °

Winder machine model PWF.1000
Very resistant structure suitable for the production of reels with DIN 355 standard soppot
Automatic tensioning system with dancer arm with pneumatic adjustment, from 200 to 2000 N.
Motor 2.2 kW frequency controlled.
Pre-selectable meter counter and stop, optional, to the achievement of the set size.

Twister machine LMR-50
Rotation up to 2300 g/min

Optional: Packaging and rewinder machine availables