AMUT 50/36D + 48/33D de 2008 d'occasion à vendre
Produits similaires:
BREYER
- Ligne d'extrusion de plaques mono-couche
Année: 2011
Matières: PMMA,PS, ABS
Laize Film (Max): 1650 mm
Épaisseur Du Film (Min): 3.5 mm
MEAF
- Ligne d'extrusion de plaques mono-couche
Année: 2005
Laize Film (Max): 800 mm
Épaisseur Du Film (Min): 0.40 mm
UNION
- Ligne d'extrusion de plaques mono-couche
Année: 2016
Laize Film (Max): 550 mm
Épaisseur Du Film (Min): 0.30 mm
BANDERA CTR 1000/80
- Ligne d'extrusion de plaques mono-couche
Année: 1990
Laize Film (Max): 1000 mm
Épaisseur Du Film (Min): 0.20 mm
BATTENFELD-CINCINNATI OLV 400/1050
- Ligne d'extrusion de plaques mono-couche
Année: 2012
Matières: PP, PS
Laize Film (Max): 850 mm
Épaisseur Du Film (Min): 0.30 mm
UNION XPET line
- Ligne d'extrusion de plaques multi-couches
Année: 2018
Laize Film (Max): 1100 mm
Épaisseur Du Film (Min): 1.5 mm
BATTENFELD
- Ligne d'extrusion de plaques multi-couches
Année: 1981
Matières: PS and PP
Laize Film (Max): 800 mm
Épaisseur Du Film (Min): 0.20 mm
BANDERA 2C 105 HT
- Ligne d'extrusion de plaques multi-couches
Année: 1999
Matières: PE
Laize Film (Max): 1550 mm
Épaisseur Du Film (Min): 0.50 mm
Fiche technique: AMUT 50/36D + 48/33D d'occasion
Ref.: 300036550
Marque: AMUT
Année: 2008
D'autres caractéristiques:
Extrusion line for PS/ABS sheet
Year of manufacturing : 2008
Foil useful width : 700mm
Line nominal width : 1000mm
Materials : PS, ABS
Thickness : 0,3-2 mm
Layers : 2; A-B geometry; A=skin layer 15% of total thickness; B=bottom layer 85%
Throughput : abt. 350 kg/h (PS, ABS)
Line features:
· Main extruder corotating twin screw extruder type, diam. 50mm L/D 36 with venting unit and thermoregulated barrel with water thermoregulation unit. Screws and barrel with sectors execution, each sector L/D length. Motor 120 kW, screws speed up to 600 rpm. Complete with : gravimetric dosing system, 3 ingredients by Colortronic; hydraulic screen changer; gear pump,
· Coextruder, single screw type, diam. 48/33D with venting unit and manual screen changer,
· 2 layers Feed Block “A-B” geometry (A=skin layer by coextruder; B=bottom layer by main extruder); T-Die for sheet complete with choke bar and replaceable bottom lips for thickness range 0,2-2 mm. Upper lip manually adjustable, front deckling bars for width adjustment,
· Vertical calender with three rolls having diameter 400 mm, nominal width 1000 mm, independent motors fed by inverters. Rolls closing system by hydraulic unit and motorized adjusting of the GAP (automatic GAP system), N° 2 additional cooling rolls diam. 200 mm for foil, idle rotation. Thermoregulation unit with three independent citcuits. Unwinding shafts for upper or bottom lamination fitted with pneumatic brake for manual tension control, 4 m. roller set
· Haul-off unit with rubber-coated rolls and edges triming + central cut by fixed blades and rotating blades (scissor cut, by upper and bottom disc blade), n° 2 trimmed edges chopper machines with belt conveyor for pieces discharge.
· Foil winding unit with n° 2 winder each one with n° 2 cantilever shafts (total 4 winding shafts), expansion type, 8” diameter (200mm), reels widh 700mm. Maximum reels diameter 1200 mm.
· Electric cabinet for power, thermoregulation and control by PLC Siemens, S7 type. Operator panel, calender mounted, with Siemes touch-screen 10” and push-buttons,