Linea di estrusione e stiro per film bi-orientado: BRÜCKNER 3 layers del 1986 usata
Prodotti simili:
BRÜCKNER 3 layers
- Linea di estrusione e stiro per film bi-orientado
Anno: 2004
Larghezza Film (Max): 4200 mm
Strati: 3
WINDMÖLLER & HÖLSCHER Varex
- Linea di coestrusione
Anno: 2014
Materiali: LDPE, LLDPE, HDPE,Metalocene
Larghezza Film (Max): 2800 mm
Produzione: 1500 kg/h
LAEM SYSTEM SV 301/1000
- Taglierina ribobinatrice con avvolgimento a stazioni indipendenti
Anno: 1995
Larghezza Lavorabile: 1700 mm
Materiali: BOPP,PET
Diametro Svolgitore: 1000 mm
GALILEO SLITTER MSR25
- Taglierina ribobinatrice con avvolgimento a stazioni indipendenti
Anno: 2003
Larghezza Lavorabile: 2500 mm
Materiali: PET : 12-40mic, OPP : 15-40mic, PVC : 20-40mic, NYLON : 10-50mic, CPP : 25-100mic, LDPE : 25-65mic,
ATLAS CW 960 AP
- Taglierina ribobinatrice con avvolgimento a stazioni indipendenti
Anno: 1993
Larghezza Lavorabile: 6000 mm
Materiali: BOPP
Diametro Svolgitore: 1000 mm
KIEFEL KIRIONW 80 - 1600 - S1 / C
- Linea di estrusione monostrato
Anno: 2008
Materiali: HDPE, MDPE
Larghezza Film (Max): 1600 mm
Produzione: 250 kg/h
MACCHI COEX FLEX
- Linea di coestrusione
Anno: 2017
Materiali: LDPE, LLDPE, Metallocene
Larghezza Film (Max): 2700 mm
Produzione: 1000 kg/h
COLINES HANDrollEX 1000–A.
- Estrusore di film estensibile
Anno: 2009
Numero strati: 3
Luce Nastro: 1100 mm
Scheda Tecnica: BRÜCKNER 3 layers Usato
Rif.: 300033389
Marca: BRÜCKNER
Anno: 1986
Altri Dati:
Bruckner BOPP line , major renovations in 1994 to increase the line speed /output
Max. speed ( m/min) : design 160 m/min in production : 150 m/min.
Final film width : 4800 mm. divided to 3 separate winders with working width of 2200 mm.
Film thickness : 20- 35 micron .
1- Main extruder barmag , DC drive , L/D=33
2- Metering pump: barmag make , DC drive .
3- Main filtter : LLF-12 , Barmag, with surface area 1.2 m2. With its oil heating system + 1 stand by electrical heating station& 1 spare filter.
4- Co-extruders: 2 co extruders with max. output =45 kg/hr., Dc drive , included with double filters with surface area = 100cm2/unit.
5- Flat Die : simplace make , 3 layers , slot opening =750 mm.
6- Casting unit :- include chill roll + air knife + film & chill roll draying system.+ water bath.
7- MDO ( machine direction orienting unit ) bruckner : 8 pre heating rolls , 6 drawing rolls,2 annealing rolls& 3 nip rolls, tension control at inlet ang out let , - Oil heating system for the rolls including pumps, control valves, etc. - Dc drive , stretching value up to 5 times.
8- TDO ( Transfer direction orientation ) Bruckner; Chain and chain track model :FOK 4-4-1. Heating system : circulating oil via individual heating system/ zone ( heat exchanger , fans , control valves . oil boiler ,etc). Edge guide system at inlet; Mechanical speed =170 m/min , production speed up to 150 m/min, Dc drive
9- PRS with edge trim on line recycling unit and 2 corona treatment stations . Dc drive, Corona power = 50 kw / station .
10- WINDERS :- Working width = 4800 mm divided to 3 separate winders with max. working width 2200 mm. Core : steel cores with max. diameter = 750 mm with film .
11- AC & PLC :- Fully integrated system PLC step 5 with monitors . etc.
12- Thickness gauge :-For cast film , FAG system , out of operation . For final film : scantech -SIG 214
13 - Material feeding equipments :- Feeding trench , conveying fan , daily silo , volumetric dosing unit for main extruder
14- edge trim recycling: Edge trim grinder , conveying fans