UNILOY MSC/D del 1994 usata in vendita

Scheda Tecnica: UNILOY MSC/D Usato

Rif.: 300038033

Marca: UNILOY

Anno: 1994

Altri Dati:

Blow moulding machine - UNILOY - MSC/D S2 (NO EXTRUSION HEAD)

The machine is fully operational! We provide installation, commissioning and a guarantee of start-up.

TECHNICAL PARAMETERS - UNILOY MSC / D - S2

EQUIPMENT UNIT: EI 92/80

Diameter - 80 mm
Screw Length - 24 L/D
Rpm - 78 n/m
Single die-head (actual configuration bottles 4-5 litres)
Heating zones - 5
Cooling zones - 4
Heating power on cylinders - 15400 Watt
The power of heating on the flange - 900 Watt
Cooling capacity on cylinders - 1000 Watt
Installed thermal power - 17,3 kW

HYDRAULIC UNIT: "EFFETI - IMPIANTI"

Tank capacity - 400 l
Pump: displacement speed (at 1470 rpm) ~ 63 l / m
Engine power - 18.5 kW
Extruder pump flow (at 1470 rpm) ~ 200 l / m
The power of the extruder motor - 45 kW
Motor power MOOG - 3 kW

PARAMETERS OF THE EXHAUST / BLOW SECTION

The length of the mold plate - 440 mm
The width of the mold plate - 320 mm
The minimum thickness of the form - 258 mm
The maximum thickness of the form - 262 mm
The minimum length of the form --- mm
The maximum length of the mold - 490 mm
Maximum opening of forms - 260 mm
The power of closing the form - 10000 kg
Nozzle thrust - 275 kg
Intake air intake - 1500 l / m
Air pressure ~ 8 ATM
Cooling water pressure ~ 4 ATM

Complete machine with die-head but without moulds

Maximum installed power: 83.8 kW
Maximum power consumption: 76.5 kW