UNILOY UMS 70-D COEX 3
BEKUM MB 502-D COEX 4
BEKUM MB 303-D COEX 4
SERTA ESH10 L
ROCHELEAU R4
GARDNER DENVER ES75
GARDNER DENVER VS70
MATTEI AC30L
Referans: 300038033
Marka: UNILOY
Yıl: 1994
Diğer özellikler:
Blow moulding machine - UNILOY - MSC/D S2 (NO EXTRUSION HEAD)
The machine is fully operational! We provide installation, commissioning and a guarantee of start-up.
TECHNICAL PARAMETERS - UNILOY MSC / D - S2
EQUIPMENT UNIT: EI 92/80
Diameter - 80 mm
Screw Length - 24 L/D
Rpm - 78 n/m
Single die-head (actual configuration bottles 4-5 litres)
Heating zones - 5
Cooling zones - 4
Heating power on cylinders - 15400 Watt
The power of heating on the flange - 900 Watt
Cooling capacity on cylinders - 1000 Watt
Installed thermal power - 17,3 kW
HYDRAULIC UNIT: "EFFETI - IMPIANTI"
Tank capacity - 400 l
Pump: displacement speed (at 1470 rpm) ~ 63 l / m
Engine power - 18.5 kW
Extruder pump flow (at 1470 rpm) ~ 200 l / m
The power of the extruder motor - 45 kW
Motor power MOOG - 3 kW
PARAMETERS OF THE EXHAUST / BLOW SECTION
The length of the mold plate - 440 mm
The width of the mold plate - 320 mm
The minimum thickness of the form - 258 mm
The maximum thickness of the form - 262 mm
The minimum length of the form --- mm
The maximum length of the mold - 490 mm
Maximum opening of forms - 260 mm
The power of closing the form - 10000 kg
Nozzle thrust - 275 kg
Intake air intake - 1500 l / m
Air pressure ~ 8 ATM
Cooling water pressure ~ 4 ATM
Complete machine with die-head but without moulds
Maximum installed power: 83.8 kW
Maximum power consumption: 76.5 kW
Danışmanlığa mı ihtiyacınız var?
Sizi kullanılmış makinelerin uluslararası, değişken ve karmaşık bir ortamda alım satım sürecinin tamamı boyunca yönlendireceğiz. Satış, lojistik, hukuk ve pazarlama ekiplerimiz, işlemi kolay ve riskten uzak bir hale getirmek için süreç boyunca sizinle birlikte olacak.