Gebrauchte DOLCI FCL-31/MR-JR CONTRAWIND 1500 NANO Jahr 2015 zum Verkauf

Datenblatt: Gebrauchte DOLCI FCL-31/MR-JR CONTRAWIND 1500 NANO

Ref.: 300038728

Marke: DOLCI

Jahr: 2015

Weitere Spezifikationen:

N° 6 EXTRUDERS (55-105-105-65-65-55) WITH A.C. WATER COOLED MOTORS, FILTER CHANGERS AND THERMOREGULATED NECKS, EXTRUDERS WITH I.R. HEATERS
EXTRUDERS DIAM. 2 X 55 mm 2 x 105 mm 2 x 65 mm L/D 1:30 1:32 1:30
Max. rpm 200 120 170
Heating zones 5+1 6+1 5+1
Motor power (kW) 2 x 57 2 X 195 2 X 77
Max plastification Kg/h 2 x 110 2 x 450 2 x 150
Rate of use of extruders: 80 ÷ 88% of max. output

SURFACE STEEL SUPPORTING PLATFORM FOR EXTRUDERS AND DIE, COMPLETE WITH ACCESS LADDER AND HANDRAILS (open space below platform)

31-LAYERS SPECIAL FEED BLOCK FOR NANO LAYER TECHNOLOGY, MADE BY CLOEREN
31 layers with 6 extruders

AUTOMATIC DIE MODEL CLOEREN EPOCH III AUTOGAUGE 1900

DUAL CHAMBER VACUUM BOX WITH VENTILATORS AND INVERTERS

N° 2 ELECTROSTATIC EDGES FIXING UNITS WITH CONTROL BOX AND 2 AIR FIXING NOZZLES

JUMBO SIZE CHILL ROLL-GROUP (1500 MM. + 300 MM), ASSEMBLED ON WHEELS/RAILS, COMPLETE WITH : ROTATING JOINTS, SLIP CONTROL, EMERGENCY BRAKE, FRONT AND SIDE PROTECTION GRIDS, CENTRALIZED LUBRICATION.
Main Chill Roll 1500 mm diameter x 2200 mm width
Secondary Chill Roll 300 mm diameter X 2200 mm width

AUTOMATIC GAUGE CONTROL UNIT (X-RAY) WITH OPERATOR VIDEO INTERFACE

FILM OSCILLATOR (RANDOMIZER), WITH CONTROL PANEL

FILM PASSAGE ROLLERS IN CARBON FIBER COMPOSITE

AUTOMATIC CONTACT WINDER MODEL “CONTRAWIND 1500”, WITH INTEGRATED SHAFTS HANDLING SYSTEM AND GLUELESS CHANGEOVER
Design speed : 600 m/min.
- Max working speed : 550 m/min.
- Changeover cycle time : 50 seconds
- Winding air shaft diameter : 3”
- Reels width : 3 x 500 mm
- Trims : 2
- Range of reels diameter : from 180 to 420 mm

OPERATOR PANEL WITH LINE SUPERVISOR AND “TOUCH SCREEN” VIDEO DISPLAY

HIGH CAPACITY EDGE TRIMS IN LINE RECOVERY AND REPROCESSING SYSTEM MODEL FT 180 TWIN.