İkinci El Wicket çanta makinesi: HUDSON-SHARP 6750W APOLLO 2020

Bilgi HUDSON-SHARP 6750W APOLLO

Referans: 300042128

Marka: HUDSON-SHARP

Yıl: 2020

Diğer özellikler:

Technical Data
Feed length (bag width): 110 - 390mm
Sealing width (bag length) : 150 - 750mm
bottom folding depth: 20 - 100mm
* The maximum bag length can only be achieved by using a third row of arms
(included)
Max. mechanical cycle speed: 450tpm
Max. cycle speed with film: up to 400tpm**
Max. linear speed with film: 100 - 110m/min**
**Material, dimension and welding time dependent, operator experience. Weld seam thickness
is reduced from pretreatment level of 38 dyne and higher

Central drives shaftless 1,600mm wide unwinder
75mm diameter rollers with easy running bearings
Designed for use with Ø3" and Ø6" sleeves
min. roll Ø400mm, taken from a pallet of 120mm height
Capacity : Max. Roll width : 1.600mm
Max. roll diameter: 1.000mm
Max. weight:1.000kg
Max. Speed: 120m/min

Centre edge control, left or right side edge control and Line control (via camera)
- Digital control processor
- Electromechanical actuator
- 2 ultrasonic sensors
- CLS PRO camera sensor

Automatic positioning of the unwinder
Faster turnover and elimination of operating errors through fully automatic
Pre-positioning of sensors and camera according to recipe.

Longitudinal perforating device
longitudinal perforating wheel Ø120mm (inner diameter 22mm) to enable tear-off perforation in main film
3 perforating wheel holders included

Folding triangle 1,600mm - compact design
Automatic positioning of the folding triangle
1. web edge detection using a broadband ultrasonic sensor
2. positioning of the film edge (on the flap side) controlled via the screen or via keys (adjustable in 1mm steps in no time at all)
The position is stored in the recipe.

Bottom folding device without tools
For bottom folding depths from 20 to 100mm

Longitudinal perforator after folding
Linear perforating wheel Ø120mm (inner diameter 22mm)
2 perforating wheel holders included

Trimming unit with double knife on the flap without waste removal
1. two (2) double blade trimming unit
2. min. trimming width: 10mm
3. max. Trimming width: 25mm

Servo driven main motor (AC servo)

EXTRAS
Platform with toothed racks and linear guide rails over the entire length, usable total length 2.700mm
Autocorrection system
Automatic positioning of all additional devices
sealing bars cleaning system
Movable "monoblock" design
Adjustment "of vacuum blow-off of the wrapping arms on the bottom folding side of the bag (2 x actuator in case of 3 rows of wrapping arms)
Third row of blowers for the side seam sealing bars
Third row of wicket arms
Vacuum pump with VFAC control

ACCESORIES
Intermittent static charge of the film
Glue joint detection system
Four multi-hole perforating banks
Servo gears wicket punch 320mm
Servo gear unit for sealing bars
Cconversion kit for servo driven block bottom sealing device
Photocell for printed film
Automatic pin stacker with automatic adjustment of all stacking pins (One Step) 1 + 7 (one + seven) Removal stations 390mm
All stacking pins (36 total) Equipped with spring, i.e. combined application for both wire hangers and plastic sleeves.