İkinci El Sheet levha koekstrüzyon hatları: REIFENHÄUSER MIREX-S 5-1400 2004

Bilgi REIFENHAUSER MIREX-S 5-1400

Referans: 300042773

Marka: REIFENHAUSER

Yıl: 2004

Diğer özellikler:

5 layers shet extrusion line: A-B-C-B-A

Extruder C: RH 3021-1-120-33V
Coextruder B : RH 301-1-50-30V
Coextruder A : RH 501-1-70-33V
REicofeed 5-layer coexadaptor
Die-head BSK-F 1400
Polishing unit GA-T 1403-51
Turret Winder: SML - Series 902- 2 Webs
2 Crystalizzer

Extruder C- Extruder RH 3201-1-120-33 V
AC-drive 315 kW;
screw speed 14 - 145 min-1, 196 min-1;
5 heating and autom. air cooling zones, 1 flange heating zone, totaling 70 kW;
Barrier screw 120 mm diameter, 33 D;
Screw extractor

Extruder B: RH 301-1-50-30 V,
AC-drive 37 kW;
screw speed 19 - 187 min-1;
5 heating and autom. air cooling zones, totalling 12 kW, .
Comb screw 50 mm diameter, 30 D;
Screw extractor

Extruder A: RH 501-1-70-33 V;
AC-drive 70 kW;
5 heating and autom. air cooling zones, totalling 25 kW,
Barrier screw 70 mm diameter, 33 D; from high-grade tempered steel, flights armoured, between flights and mixer chromium plated.
screw extractor

REicofeed coextrusion adaptor 5-layer
ncluding all adaptors from screen changers/melt pump, feed block, coextrusion block for max. 5 layers, die-adaptor

Layer composition: 5 layers
extrusion direction: vertically
Extruder A: RH 501-1-70-33 V
Extruder B: RT 3201-1-120-33 V
Extruder C: RT 301-1-50-30 V

Flat die BSK-F 1400-Fl-A2/B0
flexible lip and adjustable lower lip (opening range 0.5 - 3.7 mm), outlet width 1400 mm without width adjusting device,
7 heating zones for the production of sheet and film,

Polishing and take-off unit GA-T 1403-51-Gl/B1-0J for polishing and hauling off thermoplastic products.
Polishing unit: roll width 1400 mm,
number of polishing rolls: 3,
roll diameter 1 x 310 mm / 2 x 510 mm, rolls horizontally arranged, 1st and 3rd roll hydraulically swung on, individual drive (servomotor).

Taking-off unit: roll width 1400 mm roll diameter 200 mm, roll surface rubber-coated, shore hardness 70 +/- 5, servomotor.

TURRET WINDER Series 902-2 webs W902/1400, 750/50
max. winding width on winder for full width (single web) 1300mm
max. winding width on winder for half width 650mm
max. winding speed 50m/min

Edge cutting

Winder 1 (for half width) and Winder 2 (for full or half width)
- take-off unit with AC servo drive
- Film web guiding trame with guide rollers
and web tension measuring roller prior take-off
- Turn- over winder with AC turnover drive
- 2 AC servo-winding drives
- guide roller with photocell far gap winding
operated pneumatically
- Operation panel
- 2 pneumatic winding shafts 6"
- 2 pneumatic winding shafts 3"
- 1 winding tension adjustment on touch screen panel
- 1 taper adjustment on touch screen panel
- max. winding diameter 1000 mm

Drying system, crystallizer
UNIT 1 - SOMOS Crystallizer, capacity 1100 m3/h
UNIT 2 - MOTAN Crystallizer, capacity 1200 m3/h