İkinci El Film laminasyon hattı: NORDMECCANICA Supercombi 2000 2003

Bilgi NORDMECCANICA Supercombi 2000

Referans: 300043987

Marka: NORDMECCANICA

Yıl: 2003

Diğer özellikler:

Set for solvent based & solvent less and water based adhesives coating system.
-Rotogravure including cold seal coating (not to register)
-Solventless bicomponent mixer (World Mixer) from Nordmeccanica

Web width min- max : 450-1270 mm
Coating width max : 1230 mm

Materials :
Primary unwinder:
BOPP min 15 μm, max 50 μm
PET min 10 μm, max 50 μm
OPA min 15 μm, max 50 μm
PE min 30 μm, max 200 μm
NYLON CAST min 30 μm, max 80 μm
CPP min 60 μm, max 150 μm
Aluminium min 6.35 μm, max 20 μm
Paper/Laminates min 40 g/m2, max 80 g/m2

Secondary unwinder:
BOPP min 15 μm, max 50 μm
PET min 12 μm, max 50 μm
PE min 30 μm, max 150 μm
CPP min 20 μm, max 80 μm
NYLON CAST min 20 μm, max 80 μm
Aluminium min 6.35 μm, max 20 μm
Paper/laminates min 40 g/m2, max 80 g/m2

Rewinder : Laminates max 250 g/m2

Simplex primary & secondary unwinder and Rewinder motorized drum with web edge sensor, shaftless type, bidirectional, Unwinders diameter 950mm - max reel weight 600 kg and dancer roll Safety check for reel locking.

Bonding section composed of lamination pressure roller antistatic against heated stainless steel drum (equipped with 1 heating unit from GWK Prasad, controllable temperature) and 1 cooling drum.

Drying tunnel:
Flat web passage, 2 ventilation chambers each with a length of 3 m, for a total of 6 m. It opens from the bottom side.

Corona treater:
Primary unwinder integrated corona treater from Conequipt (local), control through screen: reading and parameters setting. The corona unit is suitable for conductive and non-conductive materials
.
Coating unit:
Sleeve type pressure roller,
Solvent/fumes captured by fan and exhaust duct from the tie rod of the coating unit and through movable hoods.

A- Trolley for rotogravure coating with Doctor blade and sleeve coating cylinder:
- finished of turning (not engraved)
- 1 sleeve/cylinder holder shaft complete with cones and bushings according to sleeve Bobst standard design.
**Cylinder is dual purpose for WB coating

B- Solventless trolley equipped with software for the speed curve of machine:
The supply includes a solvent-less trolley composed of:
*1 solventless coating cylinder made of chromium-plated steel
*2 metering cylinders made of chromium plated steel
2 heating units GWK Prasad circulated by water:
1 for metering cylinders
1 for coating cylinder
*1 rubber-covered transfer cylinder, sleeve type.

C- Hotmelt trolley equipped with:
*1 coating cylinder
*1 tray for wax

Electric panels: 1 touch screen for each primary and secondary unwinders, rewinder and coating unit.
1 main control panel, with one touch screen
AC vector drives & motors and PLC by SIEMENS.

Notes: Availability of sleeves total of 5 rubber sleeves & 3 nip rollers Electrical drawings are available.

Availability: week 31, 2022.