Used BARMAG machines for sale


Sorry, this item is currently unavailable: Used BARMAG machines for sale.

Which machine are you interested in?

Request machine »


The most popular used machines: Coextrusion lines, Used Film Extrusion Machines

KUHNE WQB3/700-1 - MachinePoint

KUHNE WQB3/700-1 - 2013

Water-quench 3 Layer blown film extrusion line turned up-side-down for production of Films (ex. Medical) of PP/TPP/PP
Layer Structure: A - B - C
H-PP /T-PP/H-PP
20-25 % / 50-60 % / 20-25 %
Extruder capacity
K 105 - 30 D: max.250 kg/h PP
K 60 - 24 D: max. 100 kg/h PP
Output is depending on raw materials, layer structures, as well as on film width and -thickness...

CMG OVERFIVE PLUS - MachinePoint

CMG OVERFIVE PLUS - 2015

5-layer coextrusion line OVERFIVE PLUS for the production of agricultural stretch LDPE film
Film thickness: 23-25 microns
Type 75/75/75/100/75/Z/3600 DW - LSW " LD"
4x LHE 75/30 extruder with Magnetic 84Kw motor with Zambello
1x LHE 100/32 extruder with Magnetic 135Kw motor with Zambello
3 GGF lever filter changer (4 x 075 + 1 x100.)
Extruder Die Head CBH 1000 Pl...

BANDERA Coex 7 - MachinePoint

BANDERA Coex 7 - 2006

- Laminating Film: Up to 1800 mm (net)
- Barrier Film: Up to 1650 mm (net)
Max Linear Speed: 80 m/min
Production Capacity:
- Barrier film: 250-300 Kg/h (± 10%)
- Laminating film: 300 Kg/h (± 10%)
Thickness:
- Barrier film: 40-200 mic
- Laminating film: 20-150 mic

EXTRUDERS ABCDEFG:
- Internal Layer A
Screw Diameter: 75 mm
L/D Ratio: 30/1
4...

WINDMÖLLER & HÖLSCHER Varex - MachinePoint

WINDMÖLLER & HÖLSCHER Varex - 2012

Extruders 90/120/90 mm 30D
Die head 450/630-3 with internal heating and thickness regulation system OPTIFIL P3 . Die plate 630 mm, die gap 1,25/2,25 mm
Air Ring multicool
Calibration basket Nostic Aircage
Multinip rotating haul off, speed up to 200 mt/min
3 gravimetric dosing units 1+5 elements
Heat exchangers
Web guide
Thickness and width control system
Double automat...

RAJOO HEPTAFOIL RECF-2750-40/1600 IBC-A - MachinePoint

RAJOO HEPTAFOIL RECF-2750-40/1600 IBC-A - 2019

7 layers extrusion line
Screws Diameter mm 50 x 5,40 x 2 , L D 32
Gravimetric dosing unit Plastcontrol (1+3/1+2/1+2/1+2/1+2/1+2/1+3)
Die Diameter mm 400- 2.4 gap with IBC
Thickness control system
Oscillating take off, max working width 1500 mm
Anti curling water bath assembly
Web Guide
Tower
Lay flat width range PE 900-1500
B...

BARMAG Machines sold in the past:


Main extruder 10E8 Type : 10E8/33D-SG Screw diameter D : 105mm Screw length : 33D Drive power : 136kW Screw speed : max. 120 l/min Melt dosing pump Coextruder 7E8 Type 7E8/33D-EG Screw diameter D : 75mm Screw length : 33D Screen changer (10E8) Screen changer Auto-Screen Type : AS 100 Bolton-Emerson screen changer Type : BE95 Hydraulic power unit (for BE screen changer) Laminar adapter Type : LAM III-3/2 Number of layers : max. 3 (5) Die Type : BSW1-S Outlet width : 1350mm Flat film cooling roller haul-off Type : TFK2 roll width : 1400mm haul-off speed, max. : 3.5 -35 m/min Smoothing roll diameter : 315mm drive type : thyristor controlled GNS motor Casting roller Diameter : 60mm Drive type : thyristor controlled GNS motor Chill roll Diameter : 460mm Drive type : thyristor controlled GNS motor Electrostatic feeder Type, Eltex : EA-1400M Number of electrodes : 1 Generator, remote control Edge electrodes Quantity : 2 Connection to generator (Eltex) Foil guide frame Type : TFG2 Deflection roll width : 1400mm Deflection roll diameter : 120mm Ionizer (Simco) : 2 Longitudinal cutting device Number of cutting blades : 3 x 2 cutting width, max. : 1300mm Intermediate flat film take-off Type : TFA2 roll surface width : 1400mm haul-off roll diameter : 315mm drive type : thyristor controlled GNS motor Edge trim winder : cutting widths : 1150 - 1300mm Tempering unit (smoothing roll) Тур : TW30 Circulating medium : Water Temperature control unit (casting roller) Турe : TW50 Circulating medium : Water Temperature control unit (aftercooling roll) type : TW30 circulating medium : water Condenser cooling unit (feed bushes) 10E8 and 7E8 Тур : KKG 20 Circulation medium : demineralized water Pressure measurement Dynisco, max. contact : 0 -350bar Type : MDA 462 1/2" UNF 462 Mass temperature measurement Type : Doble PT100
4 extruders: 75-65-45-75 mm, extruder 45 is split to layers B and D. Refurbishments: in 2007 overhaul of all electric/electronic system - replacement of line control board, DC drives to AC drives with inverters. In 2011 they have purchased completely new die , new screws (L/D 32) and barrels. Die diameter 500, die gap 1,2. Corona treater Thickness 30-200 my Double Winder with expending shaft diam 76 m Gusseting is available as option
Film structure: ABCBD Extruder 1 Layer ref: A - Screw diam: 45 Extruder 2 Layer ref: B - Screw diam: 45 Extruder 3 Layer ref: C - Screw diam: 45 Extruder 4 Layer ref: D - Screw diam: 45 Film thickness: 60-200 my Head description: Width of the gap: 1,2 mm; Rotating head Die diameter (mm): 300 and 250 Corona Treatment Dosing unit on all 4 extruders, the last extruder has can be dosed with 4 different components 3 dosing units COLORTRONIC 1 dosing unit MOTAN change of winders: manual max dimension of winder: 800 mm max width of take-off: 900 mm
Rotating die : 400mm (7 layers) 5 extruders : 60,45,60,45,60 Colortronic dosing units : Extruder 1: Type UB375 2 main components 2 master batch Extruder 2 and 3: Type UB75 2 main components Extruder 4 Type UB5 2 main component with a option for 3. Extruder 5 Type UB5 2 main components 2 master batch Water bath AFS Corona Octagon line control Air ring : Addex Central vacuum loading system for all the dosing units (also for other extruder) Thickness range 35-200micron No IBC, automatic width control (Octagon) Web guiding system Fife Rewinder: Final roll width 1100mm Final roll diameter 600mm Filter changer : Lever type Consumed power aprox 150 Kw PLC Octagon Trim removal system Tower included Many spares available (list available)
Output : 160 kg/h = 160 kg/h (for very special polymers) >> line can produce up to 250kg/h MAX Model extrusion line: BARMAG blown film 5 layer Reinhold winder Diameter die: 500mm Lip opening: 1,2mm Extruder screws: dia.60 – 60 – 60 – 45 L:D ratio: 29 Materials: LDPE-HDPE-SURLYN-PP-LLDPE-EVOH Min/Max film thickness: 30μ / 100μ Type of screenchanger: Hydraulic Rotating die RTV4/4 BARMAG Dosing unit: AZO+Plastcontrol The machine has thisckness control in the die to control the thickness of the different layers. It has no thickness measurement (profile control). Edge guide: Yes WEB guide FIFE installed but up to a max of 1200mm Corona treatment: Softal double side (most recent (new) element of the machine) Cutting device: Yes Perforation: No Tower included: No (but all the platforms needed to support Corona, Haul off, system for calibration basket etc are included) Max. rewind diameter: 1000mm. Number/size airshaft: dia.75mm – 6 pieces Including: Blower air ring – cooling unit Spare parts : Die and 2 rotating units : also a 500mm die 1,2 lip included they used for quick change and minimize down time.

Do you need advice?


We will guide you through the entire process of buying and selling used machinery in a changing and complex international environment. Our sales, logistics, legal, and marketing teams will accompany you throughout the process to make the operation easy and risk-free.


First and Last Name *
Please input your name
Contact Phone *
Please input your contact number
Company *
Please input your company name
Email address *
Please input a correct email address
City *
Please input your city
Country *
Please input your Country
Comments *
Please input your comments
To continue you must accept Personal Data Processing Policy.