SACMI - CCM32MBNumber Of Stations 32 , Output (caps/min) 600 Sacmi Compression Molding Machine Year 2017
Includes:
- Molding Press CCM32MB
- Green Box Cap cooler /R- T/R
- PESCE Conveyor&Hopper
- Scoring Folder machine SFM12LC
- WATER CHILLER INDUSTRIAL FRIGO Model. GRAC 125/AX
- Conveyor + Hop... | Rotary compression moulding press | 2017 | |
PISKO - PC96
Pisko PC96 PET preform neck crystallizer machine, year 2014
Output: 12 000 preforms/hour
Working hours: 27000 hours
Configuration: PCO 1810 neck finish
Includes following auxiliaries:
- Preform Feeding System
- Unscrambler
- Temperature Control... | Mould and die cleaning equipment | 2014 | |
HUSKY - Cold Half System HyPET 120 , Number Of Cavities 32 HUSKY Cold Half System HyPET 120 year 2016
Neck PCO 1881
Weight 22.7 g, for 350-450 CSD
Model: 32 50x130 GEN 3.5
Stroke 63 mm
Max Capacity: 134t
Shot Counter: Around 117,000
Set of new core change for 22.28g can be purchased to an additional... | Moulds for Preforms | 2016 | |
YIZUMI - YL2-V100F Clamping Force 100 ton , Shot Weight (Max) 910 g Injection machine for RUBBER
-Top-Bottom hydraulic lift stroke 0-250mm
-Heating plate daylight 550mm
-Injection piston diameter 65mm
-Rubber feeding inlet dimensions 45x15mm
-Heating Plate 410x320 (WxD), T slot distance 200mm
... | Injection molding machine up to 250 T | 2021 | |
KRAUSS MAFFEI - 550-4300 GXClamping Force 550 ton , Shot Weight (Max) 2084 g ... | Injection molding machine from 500 T up to 1000 T | 2013 | |
NETSTAL - ELION 3200-2000 , Neck Diameter 72
Netstal Injection Molding Machine for Closures
Type of closure 29/25 1.35 g.
Running hours: 33699
Includes:
- MOLD 72 cav. CAP29/25MM.#FP001-3 (Z-72) Z Mold
- BRASS NIPPLEQUICK COUPLIN#IN38
- HOT RUNNER CONTROLLER#FP001-3 Mold Master
- Color ... | Injection moulding machine for food and beverages caps | 2016 | |
KRAUSS MAFFEI - KM 280/1900 C3 Sprinter CapNeck Type 280 ton
Used injection molding machine for caps and closures
Brand: Krauss Maffei
Model: KM 280/1900 C3 Sprinter Cap
Included:
- Central cooling system for the mould
- Hot runner control for 64 cavities mould
- Metal detector: Colortronic OMS - P50P
- Ho... | Injection moulding machine for food and beverages caps | 2007 | |
Netstal - Elion 3200-2900Neck Type 320 ton - Number of shots: 22.710.000 shots (about 25.500 hours)
- State of the art, almost new Netstal Elion 3200-900
- 8 airvalves with gauges.4 on the moving platen, 4 on the fixed platen
- top cover for dehumidification of the mold
- 10 inlet-outlet ... | Injection moulding machine for food and beverages caps | 2014 | |
HUSKY - H300 RS65/60Clamping Force 300 ton , Shot Weight (Max) 772 g Working hours: 29,532 (march 2023)... | Injection molding machine from 250 T up to 500 T | 2018 | |
HUSKY - Cold Half System HyPET 120 , Number Of Cavities 32
HUSKY Cold Half System HyPET 120 year 2017
Neck 3025
Weight 17g, for 500-600ml water bottle
Model: 32 50x130 GEN 3.5
Stroke 60 mm
Max Capacity: 88t
Rec. Capacity 85t
Complete refurbishment done by HUSKY in 2017
Perfect condition and availa... | Moulds for Preforms | 2012 | |
TAMPOPRINT - Closure Print Compact
TAMPOPRINT printing machine
3 colors in 1 lane
Type of ink: Solvent-based ink
28mm caps
45.000 caps per hour
Machine was never used in production, only commissioned
Available immediately... | Printing machines for food and beverages caps | 2019 | |
ENGEL - Duo 3550H/500L/650 CombiClamping Force 650 ton , Mould Height (Max) 1850 mm Working hours 14.000
Injection unit 1
Screw diam. 70
LD 22
Heating zones 6
Heating power 45 kW
Screw stroke 390 mm
Max. Injection capacity 1501 cm3
Screw speed 205 min-1
Screw torque 3600 Nm
Injection rate 435 cm3/s
Injection pressure max 2300 bar... | Bi-Injection moulding machine | 2018 | |
ARBURG - ALLROUNDER 520A 1500-800 ALLDRIVE Clamping Force 150 ton , Shot Weight (Max) 359 g Working h. 13.09.22 - 55.629 hours... | Injection molding machine up to 250 T | 2010 | |
HUSKY - H300 RS80/70
Husky H300 RS80/70 injection moukding machine for caps & closures
Includes Piovan RPA800 Dehumidifier
Working hours: 67.900 h
In good condition and available immediately!
... | Injection moulding machine for food and beverages caps | 2008 | |
SACMI - IPS 220Preform Weight (Max) 72 , Neck TypePCO
Sacmi IPS 200 injection moulding system for PET preforms
The system includes:
- Sacmi IPS 220 injection moulding machine
- One complete mould of 72 cavity 1881 PCO 32,5 gr
- One cold half of 72 cavity 1881 PCO 21 gr and 22,3 gr (from 2018)
- Resin... | Injection moulding machine for PET preforms | 2015 | |
ERLENBACH - EHV-C-E- 2550-1350 Erlenbach EM-Motion EHV-C-E- 2550-1350
Useful surface 2550 x 1350 mm
Max.pressure 1,3 bar
Incorporated 3000 kg crane
Course 800 mm
It also has a mold for 3 plates 1000 x 500 x 80/300 mm (this is electric adjustable)
It can produce plates with to... | EPS Shape Moulding Machines | 2017 | |
ENGEL - E-max 440/180Clamping Force 180 ton , Shot Weight (Max) 253 g Working hours 30.11.22 ... 77,227 h
Robot Engel ERC included... | Injection molding machine up to 250 T | 2010 | |
ZHAFIR - VE1500II / 640HClamping Force 150 ton , Shot Weight (Max) 358 g Working hours 10.02.23 = +/- 28.000hours
Robot not included... | Injection molding machine up to 250 T | 2016 | |
ZHAFIR - VE900II / 210HClamping Force 90 ton , Shot Weight (Max) 64 g Working hours = +/- 24.000 (10.02.23)
Robot WITTMANN W818 full eletric 2000mm Z, 1200 Y, 620 X (price on request)... | Injection molding machine up to 250 T | 2017 | |
SACMI - CCM 003
Complete compression moulding machine SACMI CCM003 from 2009
CCM 2009 @ 32 281 hrs
PMD 2009 @ 25 996 hrs
FSM 2009 @ 6966 hrs
The line includes:
Compression Moulding machine CCM 003
Set of tools (AB28-1810)
Set of Tools (AB 45mm)Gravimetric mi... | Rotary compression moulding press | 2009 | |
WITTMANN BATTENFELD - Micro Power 5Clamping Force 5 ton , Shot Weight (Max) 1 g Almost no working hours.
Dryer and Robot included, info below.
INTERFACE: Euromap 63
-2x Pneumatic core pull for clamping platen incl. Pneumatic regulator
-Additional pressure controller 0 to 10 bar
-Pneumatic maintenance unit incl. pressure regul... | Injection molding machine up to 250 T | 2019 | |
INTEC-OTTOGALLI - RCL-S1Clamping Force 1000 ton The machine is a prototype made to use a mixture of PO+PE; works with recycled materials.
Machine has worked for R&D and prototypal development.
The machine can produce pallets with dimensions up to 1300x1100
*The machine can produce with recycled m... | Injection molding machine from 1000 T | 2017 | |
NETSTAL - Synergy 2400-2550
Used Netstal injection molding machine SynErgy 2400-2550
Year: 2005
Resin Dryer: Piovan GP35 - Year 2005
Hopper: Piovan DSN523HE - Year 2005
Mold Dehumidifier: Eisbar
Soft Drop: NOT Included
Dosing Unit: NOT Included
Color Mixer: NOT Included
Mo... | Injection moulding machine for PET preforms | 2005 | |
SACMI - IPS 400
Injection Moulding Machine for PET Preforms
Sacmi IPS 400
Year 2015
Working hours: 34.000
Included:
- MHT Hot Runner 96 cavities
NOT Included (they will be re-used inside the company):
- Dehimidifyer
- Hopper
- Chiller
- Cold Half
- Soft Drop ... | Injection moulding machine for PET preforms | 2015 | |
CANNON SHELLEY - Cannon Tecnos 1200T SPM 2 ST 3215/10/1200+Euromap 9208Clamping Force 1000 ton CANNON Tecnos molding press 1200 T
SPM 2 ST 3215/10/1200+Euromap 9208
built 1999, refurbished 2011
good conditions and operating today
Used materials: BMC+SMC (Thermoset, duroplast)
final product: Electronic device components
working hours: 26000 si... | Injection moulding machine for thermosets | 1999 | |
HUSKY - H300 RS80/70
Husky H300 RS80/70 injection moukding machine for caps & closures
Includes Piovan RPA800 Dehumidifier
Working hours: 55.400 h
The machine is in perfect working conditiona dn available immediately!
... | Injection moulding machine for food and beverages caps | 2009 | |
HUSKY - HyCap 300 RS80/70
HyCap 300 RS80/70 Husky injection moulding machine for caps & closures
Includes Piovan RPA800 Dehumidifier
Working hours: 47.300 h
The machine is in perfect running condition and available immediately!
... | Injection moulding machine for food and beverages caps | 2011 | |
ENGEL - e-cap 740/160 , Neck Diameter 28 mm Engel e-cap 160 ton year 2018 with mould KTW 24 cavities, neck diam. 28 mm, 1881
Includes: Dosing and colouring unit KEM-TOUCH
Working hours: 2000... | Injection moulding machine for caps & closures | 2018 | |
HUSKY - GL 300 PET-P100/110 E 100Preform Weight (Max) 72
Husky GL 300 P100/110 E 100 for PET preforms from 2003
Includes hopper, dryer, mould dehumidifier and mezzanine
Running Hours: 95296
Chiller and mold not included
Last audit January 2018 by HUSKY
Auxiliaries:
Handling / Robot
Model FSI 200 GL... | Injection moulding machine for PET preforms | 2003 | |
SUMITOMO DEMAG - IntElect 210/580Clamping Force 210 ton , Shot Weight (Max) 158 g Worked hours 26615 hours
Hours under power 32244 hours
Injection and Clamp Drives renewed in 2015
The machine is in good condition.... | Injection molding machine up to 250 T | 2010 | |
- Hot Runner HyPET 120 , Number Of Cavities 32
M PET Mold Masters Hot Runner for HUSKY HyPET 120
Year 2013
Perfect condition and available immediately!
... | Moulds for Preforms | 2014 | |
HUSKY - 96 cav 9.5 gr neck 26-22.12 P3 Product Description Cold half and robot plate , Number Of Cavities 96
Husky cold half and robot plate
Weight 9.5gr
Neck: 26-22.12 P3
Take out plate included
7.066.300 shots... | Moulds for Preforms | 2014 | |
HUSKY - G400 GEN-RS85/70
Complete line Husky G400 GEN-RS85/70 from 2001
The machine currently works with moulds 64 and 72 cavities
2,35/2,6/2,9 gr, PCO1881/1810
Moulds are NOT included
The line is in production and available immediately!
... | Injection moulding machine for food and beverages caps | 2001 | |
NETSTAL - HP 3500/3550 R
Used Netstal injection molding machine HP 3500/3550 R
Year: 1996
Resin Dryer: Piovan GP35 - Year 2013
Hopper: Piovan TN2000 - Year 2013
Mold Dehumidifier: NOT Included
Soft Drop: NOT Included
Dosing Unit: NOT Included
Color Mixer: NOT Include... | Injection moulding machine for PET preforms | 1996 | |
HAITIAN - MA12000Clamping Force 1200 ton , Shot Weight (Max) 4200 g Energy saving Servo motor machine. ... | Injection molding machine from 1000 T | 2012 | |
JSW - J650 ADS 3100HClamping Force 650 ton , Shot Weight (Max) 3288 g Full electric machine; from DEC 2022. Never used. ... | Injection molding machine from 500 T up to 1000 T | 2022 | |
KRAUSS MAFFEI - 3200 MX -24500Clamping Force 3200 ton , Shot Weight (Max) 11386 g ... | Injection molding machine from 1000 T | 2015 | |
SACMI - PMV224ENumber Of Stations 24
Sacmi PMV224 closure lining machine from 2012
24 head-machine
Max height of cap: 24mm
Max cap diameter: 33mm
Included:
Bucket Elevator ELPA001
Centrifugal Feeder
Jet Stream
Tools for the lining machine
Collecting Conveyor
Refrigeration ... | Rotary compression moulding press | 2012 | |
MOSS - MO-3062/3 Printing machine for caps MOSS MO-3062/3 (Italy)
Capacity up to 72000 pieces per hour
Printing machines for caps of PCO1881 and 1810 standards
Possibility of applying three-color printing... | Printing machines for food and beverages caps | 2012 | |
SUMITOMO DEMAG - Systec 1500/1500-11500Clamping Force 1500 ton , Shot Weight (Max) 5217 g Model and year of manufacture of the robot; BRAND BORUNTE ROBOT-BRTN22WSS5 .YEAR OF MANUFACTURE : 2017 (ASK FOR PRICE)
Working hours 3685 hours... | Injection molding machine from 1000 T | 2017 | |
SACMI - CCM32MBNumber Of Stations 2 , Output (caps/min) 1400
2 x Rotary compression molding machine Sacmi CCM32MB from 2015
Complete Line with 2 32 cavity presses 1xFolding and Scoring and 1 PMV all from 2015
Capacity: 1400 (700+700) caps/minute max
Working hours: 10000 hours (end 2018)
Included:
Modul: 2... | Rotary compression moulding press | 2015 | |
ENGEL - 120T Victory 200/120 PowerClamping Force 120 ton , Shot Weight (Max) 72 g Tie-bar less
90537 hours worked
Robot Engel ERC 23/1-EH... | Injection molding machine up to 250 T | 2004 | |
ENGEL - E-motion 940/180Clamping Force 180 ton Working hours: 39.220
**NEW, PACKED, NEVER USED SPARE PARTS AVAILABLE(NOT INCLUDED, PRICE ON REQUEST)**... | Injection molding machine up to 250 T | 2005 | |
ENGEL - ES 1350/300 HL PRO-SeriesClamping Force 300 ton , Shot Weight (Max) 892 g ... | Injection molding machine from 250 T up to 500 T | 2002 | |
FANUC - R MATE 200iD 7Robot TypeArticulated ... | Robot | 2015 | |
HUSKY - HyPET 300 HPP RF P100/110 TSE55Preform Weight (Max) 72
Complete Husky IMM for PET preforms
HyPET 300HPP RF P100/110 TSE55
Running with recycled (rPET) or virgin pellets
Flake option (RF) is disabled, filter was removed
600 kg/h
Including:
Plastic Systems Hopper, Dryer (DR820HD)
Working hours: 46... | Injection moulding machine for PET preforms | 2012 | |
HUSKY - GL300 PET P100/110 E120Preform Weight (Max) 48
Complete system of Husky GL300 PET P100/110 E120 injection moulding machine for preforms
- Resin Dryer, Plastic systems DR222HT
- Hopper : Plastic System H4500
- Mould Dehumidifier Munters ML1100E
- Chiller, NOT Included
- Conveyors : MB Conveyors... | Injection moulding machine for PET preforms | 2000 | |
KRAUSS MAFFEI - 650-2700 C1Clamping Force 650 ton , Shot Weight (Max) 1312 g Included Robot SEPRO 4040 S3 Visual (2004)... | Injection molding machine from 500 T up to 1000 T | 2001 | |
KRAUSS MAFFEI - 125-520 C1Clamping Force 125 ton , Shot Weight (Max) 250 g ... | Injection molding machine up to 250 T | 2001 | |
ENGEL - Insert 80V/100 ECO PROClamping Force 100 ton , Shot Weight (Max) 45.08 g Vertical Machine with Rotary Table 1200mm
Only 9959 working hours... | Injection molding machine up to 250 T | 2013 | |
HUSKY - Hylectric 225 , Neck Diameter 48
HUSKY HYLECTRIC H225 from 2004
Injection molding machine for caps, 48 cavities
Clampling force: 2250 kN
Mold CORVAGLIA included, for 28mm PCO 1881 neck finish
Dryier Green Box
Conveyor
Available immediately!
... | Injection moulding machine for food and beverages caps | 2004 | |
YUSHIN - YC II - 600S - 30 - 15.5Robot TypeCartesian , Entry PointTop Max. load 15 kg
Transversal 2200 mm
Vertical 1300 mm... | Robot | 2014 | |
GOETTEX - Packing unit Type: Packaging machine
Max. packaging dimensions: 1000 x 500 x 500 mm.... | EPS Cutting Line | 2020 | |
DALMEC - PARTNER EQUO COLONNA Pneumatic manipulator
FEATURES
Max. capacity 550 Kg
Maximum working radius: 4000 mm
Maximum vertical lifting speed: 0,5 meters / second
Vertical stroke: 2450 mm
Control system: pneumatic only
Power supply: filtered compressed air (40 µm), not lubri... | Robot | 2017 | |
ARBURG - Hi-Drive 920 H 5000-4600Clamping Force 500 ton , Shot Weight (Max) 2092 g Hybrid machine... | Injection molding machine from 500 T up to 1000 T | 2014 | |
HOME MADE - Glass 6 cavities Glass 260ml (Compact) 6 cavities
Weight of the product: 13 g.
Capacity: 4000 pieces/h
Currently working on KRAUSS MAFFEI - KM280-1400 C3
800.000 injection cycles made... | Injection moulding moulds | 2015 | |
ENGEL - VICTORY 500/110 TECHClamping Force 110 ton , Shot Weight (Max) 228 g Working hours – 102 000
Motor – 18,5 kW
Total – 29 kW... | Injection molding machine up to 250 T | 2004 | |
HUSKY - Rouxel Watercap 30/25 2gr Product Description cap for still water , Number Of Cavities 16
Husky Hot runner from 2008
Rouxel watercap cold half
with the slitting machine Taiwan hwa long
with the thermocontroller PMS Mold Master
Mold is working condition
Neck 30/25 2gr
16 cavities
Mold runs at 6,5 sec
Dimensions of the mold: 885 x 380 x 5... | Moulds for Closures | 2008 | |
HUSKY - ELL750 RS120/110Clamping Force 750 ton , Shot Weight (Max) 4400 g PLC and electrical components overhauled in 2017... | Injection molding machine from 500 T up to 1000 T | 2000 | |
MORETTO - XD609X Dryer XD609X ( air flow from 475 m3/h to 950 m3 /h )
Hopper OTX 4800VP
Heater HT64T180
Triphase pump 5KW V50S50
Filter FC30CPB
Container C25HT
Year: 2016
... | Air dryer | 2016 | |
INOVAS - InTerm-C06 + InTerm-C04 Fully equipped EPS tableware production line. Brand Inovas. Purchase date 2016-2018
4x EPS CUP THERMOFORM MACHINE
Model: InTerm C06
3x EPS CUP THERMOFORM MACHINE
Model: InTerm C04
1xpre Expander
Model: InPre 50
Plus:
Pump ELEKTROR
Model: 1... | Complete Plant for EPS packaging | 2017 | |
- Run-off water evacuationProduct Description Run-off water evacuation , Component Weight 41000 g Set of moulds for the production of run-off water evacuation systems
Straight and bottom sections, according to provided pictures
Weight of product, straight section: 41 kg
Weight of product, bottom section: 27 kg
MOLD DIMENSIONS, STRAIGHT:
Low... | Rotomoulding mold | 2013 | |
ENGEL - Victory VC 330H/80W/140 COMBI PRO - BI-INJECTIONClamping Force 140 ton 1st injection unit Ø 25 mm
Screw stroke 160 mm
Max injection capacity 79 cm3
Injection rate 99 cm3/s
Injection pressure 2200 bar
2nd injection unit Ø 18 mm
Screw stroke 100 mm
Max injection capacity 25 cm3
Injection rate 66 cm3/s
Injection pressu... | Injection molding machine up to 250 T | 2013 | |
SACMI - CCM24SANumber Of Stations 24 , Output (caps/min) 450
Complete Sacmi CCM24SA from 2011 with Alaska 3 start neck
Offer includes:
- CCM 24SA
- Folding and Slitting FSM 12 LB
- Mold for 3 start neck Alaska closure
- Piovan Doser
- UPS for Power Back up from EATON 80Kva
Working Hours : 51,000
Ca... | Rotary compression moulding press | 2011 | |
SACMI - CCM 32 M , Output (caps/min) 1400
Complete SACMI line for closures from 2009
For CSD PCO1881 Closures along with Molds & Tools for PCO1810
Offer includes:
2 x CCM 32 M working hours: 65,000 and 35,000
1 x FSM 12L working hours: 28,000
1 x PMV 224D working hours 57,000
CVS053B O... | Rotary compression moulding press | 2009 | |
SACMI - CCM 003 , Output (caps/min) 500
Complete compression molding line for one piece closures Sacmi
Product: PCO-1881, neck 28mm, 2.55 gr.
Capacity 500 pcs/min.
Working hours: 82000 h
The line includes:
· Sacmi Rotary press CCM003C (of year 2006) with slitting machine
· Sacmi Fold... | Rotary compression moulding press | 2006 | |
KRAUSS MAFFEI - 500-2700 C2Clamping Force 500 ton , Shot Weight (Max) 998 g Robot included... | Injection molding machine from 250 T up to 500 T | 1999 | |
HUSKY - Q1350 RS115/95Clamping Force 1350 ton , Shot Weight (Max) 3225 g Working hours of the machine: 7163
Reinforced screw.
No moulds for sale
Robot Husky TMA is included
Year of production: 2008.... | Injection molding machine from 1000 T | 2008 | |
MOTOMAN - Nx 100Robot TypeArticulated Motoman robot 160Kg
With Nx100 control unit
Available from March 2022... | Robot | 2007 | |
DEU - DG400Clamping Force 400 ton , Shot Weight (Max) 1990 g Includes dryer & Robot... | Injection molding machine from 250 T up to 500 T | 2002 | |
HUSKY - 48 cav. 30, 4gr neck 26-22.12 P1 gravity II Product Description Cold half and robot plate , Number Of Cavities 48
Used Cold half and robot plate for Husky injection molding machine
Weight of the preform 30.4gr
Neck: 26-22.12 P1 gravity II
Lenght of the preform 119,20 mm
Take out plate for the robot included
the hotrunner is not included
Mould stored
Number o... | Moulds for Preforms | 2016 | |
ENGEL - DUO 11050H/7050M/1700 COMBIClamping Force 1700 ton , Mould Height (Max) 2500 mm Engel DUO bi injection molding machine
Opening stroke(with pressure pad): 1230 kN
Opening force: 437 kN
Tie-Bar diameter: 265mm
Dry-Cycle (Euromap 6): 5.2sec
Dry-operation stroke: 1300mm
-Middle Platen
Opening stroke: 1475mm
Min distance Fixed plate... | Bi-Injection moulding machine | 2008 | |
PROTECNOS - PTZ 1400Clamping Force 1400 ton , Shot Weight (Max) 4636 g Includes: Robot
Working hours 18460 (July 2022)... | Injection molding machine from 1000 T | 2017 | |
ENGEL - ES1050/200 HLClamping Force 200 ton , Shot Weight (Max) 547 g With Robot... | Injection molding machine up to 250 T | 1998 | |
NEGRI BOSSI - BI-POWER VH2700Clamping Force 2700 ton , Shot Weight (Max) 12061 g Euromap 2700H/22500
ROBOT INCLUDED.
-Injection capacity HDPE: 9543g
-Plasticising capacity HDPE: 180g/s
-Opening force: 1100 Kn
-Max mold weight: 60ton.... | Injection molding machine from 1000 T | 2011 | |
ENGEL - ES 4550/1350H/1200K-2FClamping Force 1200 ton , Shot Weight (Max) 2400 g Robot (price on request)... | Injection molding machine from 1000 T | 1998 | |
HUSKY - Hylectric H1000 RS135/125Clamping Force 1000 ton , Shot Weight (Max) 6995 g Accumulators
Koch dosing unit... | Injection molding machine from 1000 T | 2004 | |
ENGEL - E-Duo 1340/700 picoClamping Force 700 ton , Shot Weight (Max) 673.4 g Full electric Engel E-Duo 1340/700 PICO... | Injection molding machine from 500 T up to 1000 T | 2014 | |
NETSTAL - S 3500-3700E Used Netstal SynErgy 3500-3700 E from 2007
Clamping force 3500 kN
Screw diameter 80 mm
Plate dimensions 1050x1150
Clearance between columns 720x720
Mould hight 600-950
Opening stroke 0-700
Motor power 90 kW
Heating power 53,5 kW
Dimensions 9,65x2,33... | Injection moulding machine for food and beverages caps | 2007 | |
IZOTERM - IZOTERM EPS forming machine with mould for the production of EPS formwork blocks
In one cycle the machine produces 2 blocks open on both sides and 1 block closed on one side (see photos)
Block size: 1000 mm x 250 mm x 250 mm
Block wall thickness: 50 mm
T... | EPS Shape Moulding Machines | 2008 | |
IZOTERM - WT4 The machine is designed for the production of moulded polystyrene foam products. The moulding process is carried out using water steam and a vacuuming process in full automatic mode.
Approximate water steam consumption: 450 kg/h (0.15 MPa)
Approxima... | EPS Shape Moulding Machines | 2018 | |
SIPA - PPS-96
SIPA PPS-96 complete system
Includes:
- Injection machine for preforms
- Dryer
- Dehumidifier Eisbar
- Transformer
Around 45.000 working hours
Moulds available for: 72 cavities, neck 38 2 start, 38mm SP400, 1881
Installed and possible to inspec... | Injection moulding machine for PET preforms | 2009 | |
SACMI - NEGRI-BOSSI Bi-power VH1300/12100 BClamping Force 1300 ton , Shot Weight (Max) 6689 g ... | Injection molding machine from 1000 T | 2014 | |
DEMAG - Ergotech 80-400 vivaClamping Force 80 ton , Shot Weight (Max) 186 g Used materials PP; ABS; PS; PC+ABS
Hours worked 28085,5 h 2533027cycles (October 2022) ... | Injection molding machine up to 250 T | 2002 | |
KRAUSS MAFFEI - 650 - 8000 CClamping Force 650 ton , Shot Weight (Max) 4560 g Used on PP/PCABS material
Changed HLP-46 oil
Right pillar box replaced
Full documentation available ... | Injection molding machine from 500 T up to 1000 T | 1999 | |
MAICO - Tek 600 2iClamping Force 600 ton , Shot Weight (Max) 1335 g Two moveable injection units (2k), front and rear.
Second injection unit screw is 85mm. ... | Injection molding machine from 500 T up to 1000 T | 1999 | |
NEGRI BOSSI - NB 210 2100H-820Clamping Force 210 ton , Shot Weight (Max) 435 g Robot Witmmann W818-4914 (2015)... | Injection molding machine up to 250 T | 2000 | |
ERLENBACH - EHV C-E 1395/870 EPS Shape moulder machine
Max dimensions: 1395/870
1x Fish crate mould included in the price
Mold dimensions L x W x H: 462mm x 278mm x 80
Still in production
2 Units available (PRICE per Unit) ... | EPS Shape Moulding Machines | 2006 | |
ERLENBACH - EHV C-E 1270/870 EPS Shape moulder machine
Max dimensions: 1270/870
Still in production... | EPS Shape Moulding Machines | 2006 | |
NETSTAL - PET 2000-3700 RPreform Weight (Max) 60 , Neck TypePCO
Complete system for preforms Netstal PET-LINE 60N/95 from 2012
Includes:
- PET Injection system Netstal PET 2000-3700 R
- 60 cavity injection mould Otto Hofstetter AG (27 gr)
- 60 cavity injection mould Otto Hofstetter AG (30,5 gr)
- Dryer Piovan ... | Injection moulding machine for PET preforms | 2012 | |
BOY - 50T EClamping Force 50 ton , Shot Weight (Max) 69.5 g Servo-moto pump (Great energy eficiency)
Two platen machine.
Only 135 working hours
Included in the price:
-Spare barrell
-Winch for mold change
-Material dryer
-Hopper loader
-Mould temperature control
-HOT RUNNER
-Take out conveyor... | Injection molding machine up to 250 T | 2015 | |
ACABE - RB 201 Rotomoulding equipment
Brand: ACABE
Model: RB-201
Equipment for the manufacture of PUR parts of different sizes.
Moulding system without heat input - Impeccable condition.
- With safety fairing and automatic closing.
- Automatic stop system in case... | Rotomolding machine | 2005 | |
WUTUNG - OS-WT-3025-3C WUTUNG UV Printing Machine
Model. OS-WT-3025-3C Capacity 1000 pcs/m
Includes:
1. P&S Inspection Machine for Closure Printing Model PS-21EC HYPER 1000 Year 2017 Serial Nr. PS17-SA016
2. Box Shifter
... | Printing machines for food and beverages caps | 2017 | |
ENGEL - DUO 1800H/1050M/550 pico combi M Clamping Force 550 ton , Mould Height (Max) 1800 mm Bi-material thermoplastic injection moulding machine 500 ton, 763+422 cm3, with hydraulic rotary table 1000 mm, with incorporated robot.
CC200 control
Working hours: 37000
Injection unit 1, 60 mm, 763 cm3. With injection accumulator
Injection unit ... | Bi-Injection moulding machine | 2014 | |
TOSHIBA - IS3000DFClamping Force 3000 ton , Shot Weight (Max) 8400 g ... | Injection molding machine from 1000 T | 2013 | |
BATTENFELD - Vertical V1000/315Clamping Force 100 ton , Shot Weight (Max) 183 g ... | Injection molding machine up to 250 T | 2002 | |
NEGRI BOSSI - V370Clamping Force 370 ton , Shot Weight (Max) 1570 g ... | Injection molding machine from 250 T up to 500 T | 1997 | |
BATTENFELD - CM40-130Clamping Force 40 ton , Shot Weight (Max) 55.9 g VERTICAL
• Double pump for parallel ejector or core puller movement
• 2x hydraulic core puller
• Injection unit in horizontal position
• 1x air valve
• 4 cooling water circuits
• Euromap 67
• Kisler modul
• 2x connector for dosing unit
• 5x hot r... | Injection molding machine up to 250 T | 2011 | |
BATTENFELD - TM 1300/525Clamping Force 130 ton , Shot Weight (Max) 289 g Working hours – 102 000 h
Motor 18,5 kW... | Injection molding machine up to 250 T | 2001 | |
KRAUSS MAFFEI - CX 160-750Clamping Force 160 ton , Shot Weight (Max) 278 g Working hours – 82 000
Motor – 18,5 kW... | Injection molding machine up to 250 T | 2005 | |
GEFIT - Complete Plant , Neck Diameter 32
Complete plant for spirits (vodka, brandy, wiskey) closures from year 2012
The plant inlcudes:
- Assembly unit GEFIT for closures, 10.000 caps/hour
- Printing units: DELSA, MADAG, MOSS
- IMM Negri Bossi CANBIO 330 - 2 units and CANBIO 220 – 1 u... | Injection moulding machine for food and beverages caps | 2012 | |
PLASTISUD - 72 Cavities CAP 30/25 LOW RINGProduct Description SCREW CAP H30/25w.low-profile skirt , Number Of Cavities 72
Plastisud Mold (Made in France)
Mold: 72 cavities
Format: 30/25 low
Weight: 1,82 gr
Manufacturer: Plastisud
Mould dimensions : Width 640 x Length 1 590 x Thickness 700 mm
Press : Netstal Synergy 3500
Guaranteed cycle time with cooling to temperat... | Moulds for Closures | 2007 | |
PROTECNOS - PTX270Clamping Force 270 ton , Shot Weight (Max) 534 g Bimetal screw... | Injection molding machine from 250 T up to 500 T | 2010 | |
HUSKY - GL 300
Husky injection molding machine for preforms from 2003
GL 300 PET - P100/120 E140
Offer includes:
Cooling Robot by Cool Jet Model FSI200GL300
MB Conveyor
Dehumidifier for PET granulate type DR224HT with a 7000-litre tank and a dedicated pump ... | Injection moulding machine for PET preforms | 2003 | |
HUSKY - GL 300 PET P100/110 E 120Preform Weight (Max) 72
Injection molding system for production of PET preforms
HUSKY GL300PET P100/120 E100, year 2002
max. Shotweight 3 344g
max. throughput 710 kg/h
Working hours 110.000
- Injection Unit: P100/120 E120
- Clamping Unit: GL300PET
- Dryer Mann & Humme... | Injection moulding machine for PET preforms | 2002 | |
BATTENFELD - TM 450/2800Clamping Force 450 ton , Shot Weight (Max) 1508 g Working hours: 30 594 (December 2021)... | Injection molding machine from 250 T up to 500 T | 2006 | |
INOVAS - C06/InPre50 2x EPS Thermoform machine
Brand: Inovas
Model: C06
Year: 11/2017
Max. Number od molds: 6
Weight: 200kg
Dimensions LxDxH: 2000mm x 1100mm x 1800mm
AIR
Connection: 12mm
Pressure: min 6bar
Consumption: 0.3/0.4 m^3/min
COOLING WATER:
Connection: 1/2 "
... | Complete Plant for EPS packaging | 2017 | |
HOME MADE - For Waste bin/Road barrier/road cone 1 mould for separate collection of glass 1700 lt
1 double-bottomed mould for 1700-litre waste bin
1 mould for glass/paper/plastic recycling bin 2200 / 2500 lt
1 conical mould for 2200 lt bin
1 double mould for 2500 lt waste bin
1 mould for 3500 lt ... | Rotomoulding mold | | |
ARBURG - 221 K 350 - 100Clamping Force 35 ton , Shot Weight (Max) 41 g Type of control: Selogica
Closure System: Knee
hours worked 37 785 (February 2022)... | Injection molding machine up to 250 T | 2000 | |
STORK - S+6600-5850Clamping Force 660 ton , Shot Weight (Max) 2042 g Machine in production
6 x air valve free programing
Nozzle open/close valve
Hot Runner 12 zones
1x core puller.
Euromap for robot... | Injection molding machine from 500 T up to 1000 T | 2011 | |
CMA ROBOTICS - GR630 STRobot TypeArticulated Anthropomorphic robot with six degrees of freedom suitable for painting lines with air or floor transportation
Payload: 3kg
6 Axis
-Range of motion
1st axis: +/- 120°
2nd axis: +/- 70°
3rd axis: +60°/-50°
4th axis: +/- 360°
5th axis: +-360°
6th a... | Robot | 2016 | |
STORK REED - SX-Ep 5000-5600Clamping Force 500 ton , Shot Weight (Max) 3088 g no robot included... | Injection molding machine from 500 T up to 1000 T | 1998 | |
STORK REED - SX-N 12000-8600Clamping Force 1200 ton , Shot Weight (Max) 2584.764 g Robot: Wittmann W733-503... | Injection molding machine from 1000 T | 2001 | |
DEMAG ERGOTECH - 150/500 430 EL Exis EClamping Force 150 ton , Shot Weight (Max) 150 g Hybrid machine
Working hours: 74500 (16.11.2022)... | Injection molding machine up to 250 T | 2001 | |
ENGEL - Victory 200/50 Tech ProClamping Force 50 ton , Shot Weight (Max) 62 g 25.000 working hours
4 units available (Price per Unit).
Control CC200... | Injection molding machine up to 250 T | 2010 | |
HUSKY - cold half 96 cav 29/25 12.5 grProduct Description Used cold Half for preform , Number Of Cavities 96
Used cold Half for preform
Brand: Husky
Weight: 12.5 gr
Neck: 29/25 for still water
Cavities: 96 cav.
Pitch = 50 x 140
HPP 4.0 Mould
number of shots: 305.185
take out plate ( with 384 pcs of tubes )+ coolpik tubes ( 96 pucks and 288 pcs of tubes):... | Moulds for Preforms | 2014 | |
BATTENFELD - 1300/630Clamping Force 130 ton , Shot Weight (Max) 300 g Used Materials PP; ABS; PC; PA6+GF25
No robot included
3872674 cycles (september 2022)... | Injection molding machine up to 250 T | 1996 | |
KRAUSS MAFFEI - 230-1400 AXClamping Force 225 ton , Shot Weight (Max) 617.5 g MC5 control system with color monitor, integrated control panel and built-in disk drive.
Only 13.000 worked... | Injection molding machine up to 250 T | 2010 | |
NEGRI BOSSI - NB 1100-375Clamping Force 110 ton , Shot Weight (Max) 200 g Robot Wittmann Primus 16 (2017)... | Injection molding machine up to 250 T | 2004 | |
NEGRI BOSSI - NB 160-820Clamping Force 160 ton , Shot Weight (Max) 330 g Robot Wittmann W16 (2017)... | Injection molding machine up to 250 T | 2001 | |
NEGRI BOSSI - NB 160-610Clamping Force 160 ton , Shot Weight (Max) 330 g Robot Wittmann W818 (2015)... | Injection molding machine up to 250 T | 2000 | |
TONGJIA - TH260/SPClamping Force 260 ton , Shot Weight (Max) 548 g Servo motor machines, great energy efficency
Two machines available; PRICE IS FOR THE TWO MACHINES.... | Injection molding machine from 250 T up to 500 T | 2018 | |
MIR - 280-2-520 , Neck TypeOil
Injection moulding machine MIR 280-2-520, year 2003
Two extruder type
For preforms type OIL, 29 NECK, 28-30 grams
Included:
Robot GEFIT
Eurochiller EF C180 PET, three input water, inner circulation
Dryer PET Plastic Systems DR 106 HT/H 1500 PET
H... | Injection moulding machine for PET preforms | 2003 | |
NETSTAL - PET 3500/3500Preform Weight (Max) 48
Used Netstal injection molding machine PET 3500-3550 for preforms
Year: 2007
Includes:
Resin Dryer Piovan DP626, construcion year 2006
Hopper
Mold Dehumidifier not available
Mold: complete mold 48 cavities
Tie-bar diameter 125mm
Mould height... | Injection moulding machine for PET preforms | 2007 | |
ENGEL - Victory 1060/160 techClamping Force 160 ton Only used for tests
No robot included... | Injection molding machine up to 250 T | 2018 | |
SHINI - CD-9-CE The CD series of drawer dryers is used for the simultaneous drying of several or more plastics, substances or products in small quantities.
CD dryers, which are designed for, among other things, pre-drying and heating of products, are also used in e... | Air dryer | 2015 | |
HOME MADE - made in EuropeProduct Description mould for caps and closures , Number Of Cavities 12
Used complete mould for caps and closures
Brand: home made by the seller in Europe
Weight: 2,5 gr
Neck: 38 mm for Milk and Juices (old Tetratop packaging)
Cavities: 12 cav.
number of shots: 938,328
the mould can be be tested
Available immediatel... | Moulds for Closures | 2007 | |
KRAUSS MAFFEI - KM 1600/12000/1400 MCClamping Force 1600 ton , Mould Height (Max) 1600 mm
equiped with REMAK linear robot system
availability: Mai / Juni 2023 ... | Bi-Injection moulding machine | 2001 | |
KRAUSS MAFFEI - KM 1600/800 MCClamping Force 1600 ton , Shot Weight (Max) 3658.2 g core pull coupling system: EAS EIRM 12
1x coveyor belt
equiped with REMAK linear robot system
availability: Mai / Juni 2023 ... | Injection molding machine from 1000 T | 1997 | |
HOME MADE - Shower Body of the shower
Product size:116/67/25
Product weight:0,0558 kg.
Mold steel: 1,1730 (45), 40X
Mold age: 18 months
Mold cavities: 2
Runner: Cold
Machine clamping force: 80T / 120 T
Mold size: 300/350/350
Mold weight: 360 kg
Button of the sho... | Injection moulding moulds | 2016 | |
CORVAGLIA - 72 cavities 30/25 Product Description Complete mold for caps , Number Of Cavities 72
Complete Corvaglia mold
Neck 30/25
Weight 1,8g
Cavities: 72
Mold was working in a Husky H300
Mold has 25 milions cycles
Stored inside a box with anticorrosive oil
Available immediately
... | Moulds for Closures | 2008 | |
ITALTECH - impetus bt 270 / 1100 ES Clamping Force 270 ton , Shot Weight (Max) 669 g N° 1 renew injection moulding machine for thermoplastic materials, almost new, only used for mould trials, our model:
impetus bt 270 / 1100 ES (screw Ø 60 mm)
§ High-tech toggle clamping unit machine
§ Distance between tie-bars: 570... | Injection molding machine from 250 T up to 500 T | 2017 | |
PIOVAN START AUTOMATION - TW 2000 FE3Robot TypeCartesian , Entry PointTop 3 axes
Cross section: 3,000 mm
Demoulding: 1,500 mm
Vertical: 1,800 mm... | Robot | 1997 | |
KURTZ - K15.526 EPS (Expanded polystyrene) injection forming machine for the production of EPS insulating boards (mold shape) with ship laps in 2,5m x 0,6m x 2cm to 12cm thickness.
The machine dimensions are: 4m height x 5,70m length x 4,50m width.... | EPS Shape Moulding Machines | 2004 | |
NEGRI BOSSI - VE 120-440Clamping Force 120 ton , Shot Weight (Max) 210 g includes: robot Dal Maschio (year 2006)... | Injection molding machine up to 250 T | 2005 | |
HUSKY - G 300 GEN RS85/70 300 Ton Husky Injection Molding Machine
Manufacturer: HUSKY
Model: G300 GEN RS85/70
Year:1999
Screw stroke: 340mm
Screw L/D ratio: 24.7:1
Max Injection Pressure: 29,100 PSI
Injection Capacity: 1308 cm3
Tonnage: 300
Tie bar spacing: 720mm X 720mm
Cl... | Injection moulding machine for covers | 1999 | |
ENGEL - DUO 1500 2F ClsClamping Force 1500 ton , Mould Height (Max) 2300 mm Two injection units.
-Opening force (with pressure pad): 1000kN; without pressure pad 437
-Tie bar diameter: 200mm
-Mold weight max: 30000kg
-Dry cyle time: 4.5 sec
-Dry cycle stroke: 1100mm
Middle platen characteristics:
Opening stroke: 1475
Mini... | Bi-Injection moulding machine | 2008 | |
HOME MADE - Complete Plant for small home electric appliances Moulds for the production of small home electric appliancesduction.
Most Molds are made/designed in Italy, steel impax
-Molds corresponds to Juicers models (V2001/3001/4001)
must be sold together since have some parts in common like axle dented wh... | Injection moulding moulds | | |
HUARONG - HR420SFOClamping Force 500 ton , Shot Weight (Max) 1413 g ... | Injection molding machine from 250 T up to 500 T | 2016 | |
- Moulds for Bathroom/ShowerProduct Description Shower head - Bathroom accesories Different moulds for many models of shower. With connectors, grid, drains.
PRICE FOR COMPLETE PACKAGE
PRICE PER MOLD ON REQUEST.
POSSIBILITY TO BE SOLD SEPARATLEY ... | Injection moulding moulds | | |
KRAUSS MAFFEI - 2000 MC Clamping Force 2000 ton , Shot Weight (Max) 6947 g -With robot & hydraulic auto mold clamping system... | Injection molding machine from 1000 T | 2001 | |
MAGUIRE - Ultra 600 Maguire PET Dryer
Series: Ultra Low Energy Dryer
Performance: 300 kg/h
Only used for tests
Available immediatly... | Air dryer | 2019 | |
MAGUIRE - Ultra 300
Maguire PET Dryer
Series: Ultra Low Energy Dryer
Performance: 100 kg/h
Only used for tests
Available immediatly... | Air dryer | 2020 | |
KRAUSS MAFFEI - 450-4500 CS PETPreform Weight (Max) 48 Krauss Maffei 450-4500 CS PET for Preforms
Year 2010
Includes:
- Mold: 27g x 48 cavities, 38mm neck, Height 70 mm
- Robot
Available immediately!... | Injection moulding machine for PET preforms | 2010 | |
HOME MADE - Pallets and Reel holder wedgesProduct Description Pallet and Reel holder wedges - Pallet 80x120 (no. 2 moulds, one prints the shelf, the second two sets of 3 blocks + crossbars)
- Pallet 110x130 (no. 2 moulds, one prints the shelf, the second the blocks and lower crossbars)
- Reel holder wedges (1 mould, used for 3 pieces per mo... | Injection moulding moulds | | |
IZOTERM - IZOTERM EPS forming machine with mould for the production of U-shaped corners for door packaging
With installed mould, it is possible to produce U-shaped corner with the following dimensions: 1000 mm x 60 mm x 60 mm (see photos)
Corner wall thickness: 9 mm
... | EPS Shape Moulding Machines | 2010 | |
HOME MADE - Hanger Moulds , Number Of Cavities 2 - number of inputs - 2
- material - PS
- Forming elements made of hardened steel 1.2312 and 1.2738 Hardness 30-32 HRC. Other steel plates 1.1730.
- cold channel system
- automatic cycle operation
Various models avaiable
Price includes one mould mo... | Injection moulding moulds | | |
ARBURG - ALLROUNDER 720 H 3200 - 3200 Packaging (P)Clamping Force 320 ton , Shot Weight (Max) 1469 g Hybrid machine
Good working condition
Robot no included
Without additional accessories
Working hours: 59 102 (12.08.22).... | Injection molding machine from 250 T up to 500 T | 2012 | |
HUSKY - cold half 48 cav 30/25 1.75gr
Used cold Half for caps and closures
Brand: Husky
Weight: 1.75 gr
Neck: 30/25 for still water
Cavities: 48 cav.
number of shots: 239.816
HotRunner not available
... | Moulds for Closures | 2016 | |
BATTENFELD - TM1600/750Clamping Force 160 ton , Shot Weight (Max) 326 g Used Materials PP; ABS
Hours worked: 94588h 7662390 cycles (October 2022)
Robot NO... | Injection molding machine up to 250 T | 2000 | |
SANDRETTO - MEGA T820Clamping Force 800 ton , Shot Weight (Max) 5087 g Hours in Production 25.327... | Injection molding machine from 500 T up to 1000 T | 1999 | |
ENGEL - E-Max 440/180Clamping Force 180 ton , Shot Weight (Max) 202 g 2 units available, price for unit. ... | Injection molding machine up to 250 T | 2010 | |
FERROMATIK MILACRON - EE155Clamping Force 155 ton , Shot Weight (Max) 289 g ... | Injection molding machine up to 250 T | 2003 | |
NEGRI BOSSI - NB 40-150Clamping Force 40 ton , Shot Weight (Max) 84 g ... | Injection molding machine up to 250 T | 2004 | |
KRAUSS MAFFEI - KM 280-1900 C3Clamping Force 280 ton , Shot Weight (Max) 700 g Robot Wittmann W631-0386 (2003)... | Injection molding machine from 250 T up to 500 T | 2000 | |
ITALTECH - MSK 5500Clamping Force 5500 ton Machine completely refurbished in 2012; refurbishment report available.
New inverters and motors; new pumps, Hydraulic motors and reductors changed, New MOOG PLC. Electrical cabinets and cables have been changed with new ones.
-Robot Dal Maschio I... | Bi-Injection moulding machine | 1990 | |
ITALTECH - Impetus 380Clamping Force 380 ton , Shot Weight (Max) 1127 g Machine completely overhauled; for packaging, with accumulators.
Possibility for electric or hydraulic screw motor.
Machine with warranty. 2 years warranty for PLC. ... | Injection molding machine from 250 T up to 500 T | 2022 | |
ITALTECH - KS1000Clamping Force 1000 ton , Shot Weight (Max) 4495 g Machine completely overhauled.
Price for hydraulic motor. Possibility of electric motor (price on request).
Machine with accumulators.
With warranty. ... | Injection molding machine from 1000 T | 2022 | |
NEGRI BOSSI - NB 100-610Clamping Force 110 ton , Shot Weight (Max) 260 g Robot Witmmann W420 (1998)... | Injection molding machine up to 250 T | 2001 | |
KRAUSS MAFFEI - KM 150-700 C1Clamping Force 150 ton , Shot Weight (Max) 343 g Robot Witmmann W818 (2015)... | Injection molding machine up to 250 T | 1998 | |
NEGRI BOSSI - NB 160-610Clamping Force 160 ton , Shot Weight (Max) 330 g Robot Wittmann Primus 16 (2017)... | Injection molding machine up to 250 T | 2002 | |
ENGEL - ES 80/25 HLSClamping Force 25 ton , Shot Weight (Max) 35 g 6 machines available: Price for ALL machines.
-Used in clean room. ... | Injection molding machine up to 250 T | 1999 | |
MAGUIRE - Ultra 150
Maguire PET Dryer
Series: Ultra Low Energy Dryer
Performance: 50 kg/h
Only used for tests
Available immediatly... | Air dryer | 2019 | |
ATTEMA - Support for underfloor heating pipes/ Tube holder for underfloor heatingProduct Description Tube holder for underfloor heating , Number Of Cavities 4 Four-cavity mold for producing tube holder for underfloor heating... | Injection moulding moulds | 2008 | |
MATREX - Distributor for radiant floorProduct Description Mold distributor for radiant floor , Number Of Cavities 1 Single cavity mold for manufacturing the distributor for the radiant floor... | Injection moulding moulds | 2008 | |
HUSKY - Hylectric 300 RS 80/70Neck Type 305.914863893378 ton
Husky closure machine Hylectric 300 RS 80/70 from 2004
Clamp force: 3000kN
Tiebar spacing (HxV): 780 x 780 mm
Max height of mould 775 mm
Min. height of mould 400 mm
Max pressure 180 bar
Space for mould 780 x 780 mm
Diameter of the screw 70mm
Speed ... | Injection moulding machine for food and beverages caps | 2004 | |
ERLENBACH - EHV-C-H 2300/1100 7624 hours worked
Maximum moulded part size: 2300/1100 mm
Maximum moulded part depth: 180 mm
Flange - fixed side: 2375 x 1175 mm
Flange - movable side: 2375 x 1175 mm
Control voltage: 24 V =
Energy consumption: ~ 17 kW
Operating pressure
(pressur... | EPS Shape Moulding Machines | 2007 | |
LOOS INTERNATIONAL - UL-S 3200 Capacity: 3000 kg/h
Total volume: 4830 L
Maximum allowable pressure: 10 bar
Maximum allowable temperature: 184 °C
Never used.... | EPS boiler | 2005 | |
STAR AUTOMATION - CSE-1000Robot TypeCartesian , Entry PointTop X = 2000; Y = 770; Z = 1000
Used in a 125 ton IMM... | Robot | 2010 | |
NEGRI BOSSI - V 370-2000Clamping Force 370 ton , Shot Weight (Max) 1585 g Screw condition: to be overhauled. It is necessary to install a proportional valve for the closing group.
Possibility to regenerate screw and cylinder (price upon request).... | Injection molding machine from 250 T up to 500 T | 2004 | |
HUSKY - H160 RS 55/50
Injection Molding Machine for closures Husky H160 RS 55/50 from 2010
Offer includes Hopper and Dosing Unit by Movacolor
Working Hours less than 1000
Machine like new
Dismantled and available immediately!
... | Injection moulding machine for food and beverages caps | 2010 | |
HUSKY - H160 RS 45/42
Injection Molding Machine for closures Husky H160 RS 55/50 from 2010
Offer includes Hopper and Dosing Unit by Movacolor from 2010
Working Hours approximately 400
Machine rarely used. Perfect Condition. Like New
Not possible to see... | Injection moulding machine for food and beverages caps | 2010 | |
CORVAGLIA - 30/25 HProduct Description Cold Half , Number Of Cavities 48
Corvaglia cold half for closures
Manufactured 06/2002
Material = lPE
Product = Closures 30/25H
Product Mass = 2,10g
Cycle Time = 4,8 sec
Cavities = 48
Working on Husky H225
Available immediately
... | Moulds for Closures | 2002 | |
KTW - 16 Cavities 29/21 Oil cap , Number Of Cavities 16
Used mold KTW for closures
Number of cavities: 16
Format: 29/21 Oil cap
Number of shots: 721.147
cyclce time: 9,4 sec
materila LDPE
Available immediately!
... | Moulds for Closures | 2011 | |
ARBURG - ALLROUNDER 630S-2500-1300Clamping Force 250 ton , Shot Weight (Max) 607 g Working hours: 65.000 h... | Injection molding machine up to 250 T | 2006 | |
ASM - M3E3XWRobot TypeCartesian , Entry PointSide 1x Cartesian robot
Axis Z Brushless Maximum stroke 1900mm
Axis Y Brushless Maximum stroke 900mm
Axis X Brushless Maximum stroke 3000mm
Wrist overturning 0-90: Included
Self-learning control B&R: Included
Euromap dashboard
Axis X Speed: 2.5m/s
Axis Y... | Robot | 2012 | |
WITTMANN - W633Robot TypeCartesian , Entry PointTop X-900, Y-1800, Z-2500... | Robot | 2000 | |
SANDRETTO - Serie 7Clamping Force 135 ton , Shot Weight (Max) 339 g Machine bought in 2010 completely overhauled... | Injection molding machine up to 250 T | 1990 | |
HUSKY - H160 RS 45/42
Injection Molding Machine Husky H160 RS 55/50 from 2010
Offer includes Hopper and Dosing Unit by Movacolor
Working Hours about 400
Machine hardly used and in excellent condition
Machines not possible to be shown working as no power at plant
... | Injection moulding machine for food and beverages caps | 2010 | |
HOME MADE - For kitchen/bowl/grater/cutlery tray/drawerProduct Description Moulds for bowl, bowl lid, drawer, grater, cutlery tray, dustpan. -Mould for bowl lid
Weight: 88g
-Mould for bowl
Weight: 181g
-Mould for drawer
Weight: 43g
-Mould for grater
Weight: 55g
-Mould for cutlery tray
Weight: 189g
-Mould for dustpan
Weight: 66,5g
PRICE FOR ALL MOULDS
POSSIBILITY TO BE SOLD SEPARATEL... | Injection moulding moulds | | |
ENGEL - e-max 200/100Clamping Force 100 ton , Shot Weight (Max) 77 g The PLC driver must be replaced... | Injection molding machine up to 250 T | 2008 | |
IZOTERM - IZOTERM Foam block mould is used for pressing single foam grains into blocks by applying a temperature factor (water steam).
Block dimensions including allowance: 3060 mm x 1250 mm x 1050 mm (see photos)
Output capacity: 80 m3/h
Steam requirements:
p = 0,... | EPS block moulding | 2006 | |
HOME MADE - Compost binProduct Description Compost Bin For compost bin... | Rotomoulding mold | | |
BATTENFELD-CINCINNATI - TM1600/750Clamping Force 160 ton , Shot Weight (Max) 326 g Used Materials PP; ABS; PC; PA;TPE
Hours worked: 73 612 h (October 2022)
No robot included... | Injection molding machine up to 250 T | 1999 | |
ENGEL - DUO 2050/500 PicoClamping Force 500 ton , Shot Weight (Max) 1051 g ... | Injection molding machine from 250 T up to 500 T | 2009 | |
ENGEL - E-Max 440/180Clamping Force 180 ton , Shot Weight (Max) 202 g 2 units available, price for unit. ... | Injection molding machine up to 250 T | 2009 | |
FERROMATIK MILACRON - Elektra 300-SClamping Force 300 ton , Shot Weight (Max) 464 g 59896h worked (November 2022)... | Injection molding machine from 250 T up to 500 T | 2000 | |
KRAUSS MAFFEI - KM 200-700 C2Clamping Force 200 ton , Shot Weight (Max) 278 g Robot Witmmann Primus 16-0128... | Injection molding machine up to 250 T | 1998 | |
IPT - PEX-A Oven Oven for PEX-A production
Upgraded in 2014 and just used for tests.
3x400V 50Hz without Neutral 140kW
Heating power 128kW
Speed 2-20m/min
Height 4100mm
Width 2300mm
Depth 1350mm
8 Heating channels
1 Heating channel is composed of 4 IR lights,4 kW... | Heating and cooling unit for moulds and dies | 2000 | |
SACMI - CCM 001Number Of Stations 32 Complete compression molding system for two pieces closures
Product: PCO 28mm
Capacity 3,2 cycle per min
System including:
32 stations SACMI CCM 001 press from 1998
- Complete set of tools for the production of AF6 closures, weight of the ... | Rotary compression moulding press | 1998 | |
TECUS - welding sockets corrugated pipes diam. 200-500 mmProduct Description welding sockets (corrugated pipes) diam. 200-500 mm Injection moulds for welding sockets (corrugated pipes) diameters 200-250 -315-355-400-468-500 mm (Outer Diameter)
Manufacturer: TECUS... | Injection moulding moulds | | |
DAL MASCHIORobot TypeCartesian Axis: 4m, 2m and 2,5m
Max. load 35 kg... | Robot | 1994 | |
ABB - IRB 6400RRobot TypeArticulated ... | Robot | 2002 | |
MAIN GROUP - PEGASUS G16Clamping Force 25 ton MAIN GROUP MACHINE
-MODEL : PEGASUS RUBBER , injection/pouring with open mold (spaghetti system )
-16 STATION
INCOM PROCESS system
PRODUCTION: - one-colour rubber soles or technical articles .
THE BASIC MACHINE IS COMPOSED OF:
- 1 piston-scre... | Injection Moulding Machine for elastomers/LSR | 2005 | |
ABB - IRB6600 M2000ARobot TypeArticulated ... | Robot | 2002 | |
HUSKY - H800 RS 115/100Neck Type 800 ton , Neck Diameter 144
HUSKY Injection moulding system for closures H800 RS115/100 from 2011
For caps 2,90g. PCO1810 with a contract cycle of 6.5 seconds
The line is included:
- Hot channel controller for mold
- CapCooler, storage bin, orientator
- Intravis video ins... | Injection moulding machine for food and beverages caps | 2011 | |
NEGRI BOSSI - ELEOS 120Clamping Force 120 ton , Shot Weight (Max) 211 g working hours: 23.000h
Euromap: 1200H-400... | Injection molding machine up to 250 T | 2014 | |
KRAUSS MAFFEI - 200-1000 C2Clamping Force 200 ton , Shot Weight (Max) 476 g Akkumulator:Yes
Working hours: 72.000h
New pump.... | Injection molding machine up to 250 T | 2005 | |
BMB - PET 150/7000Clamping Force 150 ton , Shot Weight (Max) 6220 g Engine: Fimet-Siemens
Interface: Yes
U.S.C: 1 Sensor
PET: Yes.
Working hours: 0
With drying and cooling system... | Injection molding machine up to 250 T | 2006 | |
NETSTAL - PET 3500-3550RPreform Weight (Max) 42 , Neck TypePCO
Used Netstal injection molding machine PET 3500-3550-R
Year: 2004
Resin Dryer: Piovan DP 627
Hopper: Piovan 4.6 tons
Mold Dehumidifier: Blow Air MSP 50 C/4 (centralized for 3 machines)
Mold: complete mold 48 cavities 18 gr neck PCO 1810
H... | Injection moulding machine for PET preforms | 2004 | |
CHEN HSONG - SM2500Clamping Force 2500 ton , Shot Weight (Max) 16648 g Almost no working hours... | Injection molding machine from 1000 T | 2007 | |
NETSTAL - SYNERGY 1000-60/60/60Clamping Force 100 ton -Working hours: 36359
Machine complete with second and third injection unit, thermoregulators and protection
Hot chambers: 16
Pneumatic radial: 8
Control: DSP4
Dry cycle: 1sec
Min/Max mould thickness:
450-750
Robot connection Euromap-12:
Yes
Core pu... | Bi-Injection moulding machine | 2010 | |
DAL MASCHIO - 3P 1200Robot TypeCartesian
Robot
Brand: Dal Maschio
Model: 3P 1200
Year: 2000
With electric panel and hydronic movements
For IMM 200-300ton.
... | Robot | 2000 | |
MAIN GROUP - Pegasus 8 stationClamping Force 12 ton Main Group used (as new ) automatic rotary machine for
the injection/casting of tpu soles .
mod. Pegasus 8 station ( 4 pairs )
single colour.
Machine as new, only 60 items produced for trial.
Can be shown working. ... | Injection Moulding Machine for elastomers/LSR | 2003 | |
YIZUMI - PAC350KClamping Force 350 ton , Shot Weight (Max) 643 g TWO MACHINES AVAILABLE (PRICE per machine)
High speed Thin-wall Injection Molding Machine
Brand : Yizumi
Model : PAC-350K
Italian "Gefran" controller(10.4 touch screen) with English language
High Performance Servo pump system
Water manifold 13 in 13 ... | Injection molding machine from 250 T up to 500 T | 2020 | |
NISSEI ASB - PM170/111 MPreform Weight (Max) 32 , Neck TypePCO
Injection Molding Machine Nissei PM170/111M
YOM 2012, 32 cavities
Included 2 molds - 14,6 g neck38 mm and 35,5 g neck 28mm PCO
Auxiliary equipment compressor, chiller, cabinet
It was working only 4 years. Disconnected
... | Injection moulding machine for PET preforms | 2012 | |
BILLION - Hercule 260/470-200Clamping Force 200 ton , Mould Height (Max) 760 mm Machine : BILLION 200T Bi-injection
Type : Hercule 260/470-200
Year : 2001
Controls : DIXIT500
Core pulls : 2
Interface for robot : YES
Air circuit : 1
Screw diameter mm : H260-38 mm – H470-45 mm
Shot volume cm3 : H260- 163cm3 – H470- 278 CM3
Injecti... | Bi-Injection moulding machine | 2001 | |
- Playground rocker, jetski&rocket modelsProduct Description Playground rocker, jetski&rocket models Playground rocker, models:
-Jetski
-Rocket
Possibility to be sold one by one. ... | Rotomoulding mold | 2006 | |
TEDERIC - D250-M1100 HybridClamping Force 250 ton , Shot Weight (Max) 651 g Includes ROBOT AlfaRobot T1300WS-S3 year 2015
It can be sold without Robot
D250/M1100 Dream Series HYBRID
Power supply: 380V, 50HZ included
Controller: KEBA i2000 touchscreen included
Spindle Diameter: 60mm high-mix included
CE Certificates inclu... | Injection molding machine up to 250 T | 2015 | |
BATTENFELD - BA 2700/1200 BKClamping Force 270 ton , Shot Weight (Max) 897 g 165628022 cykli (September 2022)
Used Materials PP; ABS; PC; SEBS; TPE
No robot included... | Injection molding machine up to 250 T | 1998 | |
ERLENBACH - EHV 1510/1200 EPS Shape moulder machine
Max dimensions: 1510/1200
Seedling tray mold included in the price.
Dimensions L x W x H: 524mm x 334mm x 57mm
Cavity dimensions in mm: Superior: 22x22; Cavity height 50mm; Dripping hole: 8mm
Still in production... | EPS Shape Moulding Machines | 2002 | |
KRAUSS MAFFEI - KM 300/2000 CXClamping Force 300 ton , Shot Weight (Max) 981 g Working hours: 40 000
Optional: robot Krauss Maffei LRX 150 (price on request)... | Injection molding machine from 250 T up to 500 T | 2010 | |
KUKA ROBOTER GMBH - KR 125 L90/3 KRC2Robot TypeArticulated Payload: 90kg
Supplementary load: 120kg
Total distributed load: 210kg
Number of axes: 6
Controller: KRC2
Drive system electromechanical, with brushless AC servomotors.... | Robot | 2001 | |
NETSTAL - Synergy 1500 460/60
Netstal Synergy 1500 460/60 injection molding machine for preforms, year 1999
Working hours: 33.000
No auxiliaries or mold included
Netstal PLC and control systems
Dismantled and available immediately!
... | Injection moulding machine for PET preforms | 1999 | |
BATTENFELD - BA 4500/2800 BKClamping Force 450 ton , Shot Weight (Max) 1508 g Working Hours January 2023 - 42,520h... | Injection molding machine from 250 T up to 500 T | 1998 | |
PERSICO - LEONARDO LA-O-16//15 Max rpm main shaft 8 rpm
Max rpm scondaryshaft 3,5 rpm
Mould platen max. dimensions 1630 x 1520 mm
Opening-closing stroke 1100 mm
Mould max. weight 900 kg
Temp. max. heating 300º
Stroke and speed shaft X pick-up 3900 mm - 15 m/1'
Stroke and speed sh... | Rotomolding machine | 2007 | |
KTW - 72 cavities 1810Product Description PCO 1810 , Number Of Cavities 72
Complete mould for caps and closures
Cavities: 72
Type of closure PCO 1810
Hot runner PSG is dismantled, it was cleaned by Messburgger PSG.
Cold Half KTW
Number of shots: 1.169.221
it is not possible to be tested because the seller doesn't has ... | Moulds for Closures | 2006 | |
DEMAG ERGOTECH - Ergotech 500 Clamping Force 500 ton , Shot Weight (Max) 2550 g Core pull: 1
Machine equipped with robot Asitech
Mov. plasten stroke : 810... | Injection molding machine from 500 T up to 1000 T | 1999 | |
- Mould for 1100 lt binProduct Description Mould for 1100 lt bin Manufacturer: SES Srl
The mold has been used only for samples
Maximum overall dimension:2.924mm x 2.503mm x 1.899 mm
Weight of movable mould part: 30.500kg
Weight of fixed mould part: 48.500 kg
Total weight of the mould: 79.000kg
Weight of the bin: 3... | Injection moulding moulds | 2011 | |
ENGEL - INSERT 200V/80Clamping Force 80 ton Brand: Engel
Model: Insert 200V/80
Clamping force: 80Ton/ 800kN
Opening stroke: 357mm
Screw Diameter: 25mm
Shot Volume: 69
Mould thickness(min/max): 450min
Injection rate: 104cm^3/s
Distance between tie-bars:1130 x 625 mould plate
Euromap: 200/80
Con... | Injection molding machine up to 250 T | 2012 | |
NETSTAL - SYNERGY 1000-60/60/60Clamping Force 100 ton -Working hours: 26.782
Set up for a third injection
-Min/Max Mold thickness: 450-750
Hot Chambers: 16
Radial air: 8
Control: DSP4
Robot connection Euromap 12: Yes... | Bi-Injection moulding machine | 2011 | |
SINCAL - NCVR-1500 Steam Boiler (through Pellet)
Steam production: 1500 kg/h
Nominal heat output: 1100 kW
Steam Class: Dry saturated
Max. service pressure: 8 kgs/cm2
Design pressure: 9 kgs/cm2
Test pressure: 15,75 kgs/cm2
Feed water temperature: 80ºC
Heating surface: ... | EPS boiler | 2014 | |
APEX - SB1.200Robot TypeCartesian , Entry PointTop Axes X,Y,Z 686 x 1.164 x 2.005
max. weight 6 kg... | Robot | 2006 | |
SANDRETTO - Serie 7 - 190 tonClamping Force 190 ton , Shot Weight (Max) 525 g 2 identical machines available
Price per unit.
Machines fully overhauled in 2010... | Injection molding machine up to 250 T | 1990 | |
GREEN BOX - Chiller
GREENBOX chillers - 2 units
Both used for HUSKY GLINE300
Chiller №1. GreenBox Multi 40/HP
Cooling capacity - 140.000 Kcal/h
Compressor power - 4 x 8.9 kW
Rated power - 85.5 kW
Tank capacity - 850 liters
Dimensions - LxWxH - 4,3x1,65x2.20 meters
C... | Injection moulding machine for PET preforms | | |
- PP FittingsProduct Description PP pipe fittings Manufactured by Adana Kalipcilik, Turkey
List of moulds available in the package (27 in total)
Mould 1
20/90 elbow
Mould 2
25/90 elbow
Mould 3
32/90 elbow
Mould 4
20 Tee fitting
Mould 5
25 Tee fitting
Mould 6
32 Tee fitting
Mould 7
20 coupling
Mou... | Injection moulding moulds | 2010 | |
CHEN - CJ480M3Clamping Force 480 ton , Shot Weight (Max) 1830 g Includes Robot STAR GXE 1500 year 2004... | Injection molding machine from 250 T up to 500 T | 2004 | |
NEGRI BOSSI - V 370 - 3700H-2000Clamping Force 370 ton , Shot Weight (Max) 1060 g Robot SEPRO SR 4020 S3 (2004) included... | Injection molding machine from 250 T up to 500 T | 2001 | |
KRAUSS MAFFEI - KM 150/700/160 CZClamping Force 150 ton , Shot Weight (Max) 343 g Working hours: 38 000... | Injection molding machine up to 250 T | 2005 | |
KRAUSS MAFFEI - KM 200/1000 C2Clamping Force 200 ton , Shot Weight (Max) 476 g Optional: robot Krauss Maffei LRX S 100-1731 (price on request)... | Injection molding machine up to 250 T | 2005 | |
NETSTAL - PET 3500-3550RPreform Weight (Max) 72 , Neck TypePCO
Used Netstal injection molding machine PET 3500-3550-R
Year: 2004
Resin Dryer: Piovan DP 627
Hopper: Piovan 4.6 tons
Mold Dehumidifier: Blow Air MSP 50 C/4 (centralized for 3 machines)
Mold: complete mold 72 cavities
Hot Runner made by MH... | Injection moulding machine for PET preforms | 2004 | |
ENGEL - ELAST 430/100VClamping Force 100 ton , Shot Weight (Max) 426 g Working hours: 27.000
For Rubber... | Injection molding machine up to 250 T | 2006 | |
HUSKY - 48 Cav PCO 1881 Product Description cap for Carbonated soft drink , Number Of Cavities 48
Used Mould for caps and closures
Mold: 48 cavities
Format: PCO 1881 28mm
Weight: 2 weights - 1,95g+-0,1 and 2,20g +-0,1g
Manufacturer: Husky (included Hot Runner and Cold Half)
Mould Cycles: 110.000
Press : Netstal Synergy
Cycle time: 3.6 sec (cap ... | Moulds for Closures | 2018 | SOLD |
IDROPRESS - Block cutting line Suitable to cut blocks of 3,0 x 1,0– 1,2 x h 0,6 – 1,2 meters
It has a guillotine at the inlet so if today you have blocks of 4,0 m you can split them in 2 m blocks and cut one by one.
The down cutter is a Tongue & Groove station to cut joints as ... | EPS Cutting Line | 2011 | SOLD |
HUSKY - H160 RS55/50Neck Type 160 ton , Neck Diameter 32 HUSKY Injection moulding system for closures H160 RS55/50
its in production for caps 2,90-3,00 g. PCO1810
Mold is not inlcuded.
Construction year 2004
Working hours : 43941h
The machine is in very good condition and can be inspected in production... | Injection moulding machine for food and beverages caps | 2004 | SOLD |
HUSKY - HyPET300 P100/110 E120
Complete system of Husky Hypet 300 P100/110 E120 injection moulding machine for preforms
Mould NOT INCLUDED
Auxiliaries
- Resin Hopper Plastic System H7000
- Resin Dryer, Plastic systems DR224HT
- Mould Dehumidifier, NOT Included
- Chiller, N... | Injection moulding machine for PET preforms | 2007 | SOLD |
NETSTAL - PET 3500-3550R
Used Netstal injection molding machine Pet Line 3500-3550R
Year: 2001
Resin Dryer: Motan Luxor A 1000 + Etabox - Year 2001
Hopper: included
Mold Dehumidifier: Eisbar DAS 112 - Year 2001
Soft Drop: MB Conveyors Compatto SD-01 Year 2001
Dosing Unit... | Injection moulding machine for PET preforms | 2001 | SOLD |
JON WAI - JW-180SD Clamping Force 180 ton , Shot Weight (Max) 713.256 g Technical data:
Main plate stroke: 396 mm
Electric motor power: 22 kW
Cylinder heater power: 14.8 kW
Number of heating zones: 4
Core handling equipment: YES - 2x
Blow-off valves: YES - 2x
Connector to connect the robot: YES (standard EUROMAP 12)
... | Injection molding machine up to 250 T | 2010 | SOLD |
NEGRI BOSSI - 1300 VectorClamping Force 1300 ton , Shot Weight (Max) 6280 g Negri Bossi by Sacmi.
Working hours: 23.915 ... | Injection molding machine from 1000 T | 2015 | SOLD |
ARBURG - CUBE Allrounder 920 H-4600-4600/290Clamping Force 460 ton CUBE model with 2 injection units
Horizonal injection unit: 2290 cm3
Moving injection unit: 102 cm3
Was manufacturing PP/TPE packaging... | Injection molding machine from 250 T up to 500 T | 2016 | SOLD |
NETSTAL - PET 3500-6600RPreform Weight (Max) 96 , Neck Type29/25
Used Netstal injection molding machine PET 3500-6600R
Year: 2007
Resin Dryer: Piovan DP 627
Hopper: Piovan 5.5 tons
Mold Dehumidifier: Blow Air MSP 50 C/4 (centralized for 3 machines)
Mold: complete mold 96 cavities 11,5 gr neck 30/25 with conversi... | Injection moulding machine for PET preforms | 2007 | SOLD |
HUSKY - H 160 RS55/50Clamping Force 160 ton , Shot Weight (Max) 446 g Engineering screw
High torque screw drive
One Hуdraulic Core Pull
Pneumatic Valve Gate Control
Accumulator charging kit
Ring check valve
Integrated mold heats: 12 control zones, 230V, 16A
Robot Interface
Husky Tracer TSA Telescopic robot included ... | Injection molding machine up to 250 T | 2005 | SOLD |
ITALTECH - KS 1300/8300 ETClamping Force 1300 ton , Shot Weight (Max) 7849 g **Machine available from January 2023**... | Injection molding machine from 1000 T | 2007 | SOLD |
DEMAG ERGOTECH - Extra 100-430Clamping Force 100 ton , Shot Weight (Max) 208 g Machine produces: PP thin wall containers/ HDPE handles
No robot included
Working hours: around 94000 (June 2022).... | Injection molding machine up to 250 T | 2006 | SOLD |
DEMAG ERGOTECH - Extra 100-430Clamping Force 100 ton , Shot Weight (Max) 208 g Machine produces: PP thin wall containers/ HDPE handles
No robot included
Working hours: 94018 (June 2022).... | Injection molding machine up to 250 T | 2006 | SOLD |
HAITIAN - MA1300 III /plusClamping Force 130 ton , Shot Weight (Max) 194 g only EUROMAP 67 Robot interface
2x core pulls on the moving platen.
DIsmantling and loading not included in the price
The machine does not have a robot.
... | Injection molding machine up to 250 T | 2021 | SOLD |
ARBURG - ALLROUNDER 630 S 2500 - 800 Clamping Force 250 ton , Shot Weight (Max) 291 g Electric charging motor.
2 core pulls with proportional
2 digital outputs for 2 air valves.
Hydraulic and water hoses on the mobile plate.
Colorimeter and colorimeter signals installed (Moretto).
Working hours 18.10.22: around 25.000... | Injection molding machine up to 250 T | 2014 | SOLD |
ARBURG - AllRounder 520A 1500-800 All DriveClamping Force 150 ton , Shot Weight (Max) 356 g Working hours: 63.878 (24.10.22)
Full Electric.... | Injection molding machine up to 250 T | 2010 | SOLD |
HUSKY - 48 cav. 12gr PCO low 16.8 Product Description Cold half and robot plate , Number Of Cavities 48
Used Cold half and robot plate for Husky injection molding machine
Weight of the preform 12gr
Neck: PCO low 16.8
Lenght of the preform 74mm
Take out plate for the robot included
Hotrunner is not included
Mould stored
Number of shots: 5.198.779 ... | Moulds for Preforms | 2013 | SOLD |
FANUC - LR MATE 200iCRobot TypeArticulated ... | Robot | 2009 | SOLD |
ENGEL - E-MAC 465/180Clamping Force 180 ton , Shot Weight (Max) 155 g
All movements of the ENGEL e-mac – including the nozzle movement and ejection – are performed by servo-electric drives. This means that the machine achieves very high overall efficiency level ... | Injection molding machine up to 250 T | 2021 | SOLD |
SACMI - IPS 220 , Neck Type30/25
SACMI IPS 220 for PET preforms
Capacity 20.000 units/hour
Includes auxiliaries and cooling unit
Mould SACMI 48 cavities, 17.5 gr, 30/25
Very low hours
Available immediately!
... | Injection moulding machine for PET preforms | 2012 | SOLD |
KRAUSS MAFFEI - KM50-180CXClamping Force 50 ton , Shot Weight (Max) 78 g used materials: PS/PP/PE/PA
working hours: 73.108 h
Handling Robot: NO... | Injection molding machine up to 250 T | 2006 | SOLD |
ARBURG - Allrounder 720S Golden editionClamping Force 300 ton , Shot Weight (Max) 607 g ... | Injection molding machine from 250 T up to 500 T | 2007 | SOLD |
JSW - J180ACDClamping Force 180 ton , Shot Weight (Max) 137 g full electric, 180ton... | Injection molding machine up to 250 T | 2013 | SOLD |
TOSHIBA - IS 1600DF-WClamping Force 1600 ton , Shot Weight (Max) 7750 g 1600ton... | Injection molding machine from 1000 T | 2008 | SOLD |
KRAUSS MAFFEI - KM 2300 - 12000 MXClamping Force 2300 ton , Shot Weight (Max) 7815 g ... | Injection molding machine from 1000 T | 2010 | SOLD |
BORCHE - BS650-IIIClamping Force 650 ton , Shot Weight (Max) 2690 g 2 machines available immediately!... | Injection molding machine from 500 T up to 1000 T | 2018 | SOLD |
ENGEL - ES7050.1000kClamping Force 1000 ton , Shot Weight (Max) 3785 g incl. robot (without transfer head, without sprue cutter, without chute)
incl. conveyor belt
incl. protective grating
incl. access steps
without Koch dosing and conveyor station... | Injection molding machine from 1000 T | 1998 | SOLD |
FOSTAG - Mold 48 cav PCO 1810 Product Description Complete mold for caps , Number Of Cavities 48
Complete mold for closures Fostag
Made in Switzerland
Format PCO 1810
No temperature contoller included
Machine currently used on a BMB machine and available imemdiately!
... | Moulds for Closures | 2010 | SOLD |
SUMITOMO - Systec Multi 210/580-430h/200rClamping Force 210 ton , Mould Height (Max) 790 mm The machine is brand new. It has been installed, but has zero worling hours.
Polaform turntable type PF800
Turning plate diameter: 800mm Total
height: 148mm
Ejector position:
8x on X = 203,2/Y = 50,8 and X =50,8/Y=203,2 R25mm
4x on X = 0/Y = 91,2 m... | Bi-Injection moulding machine | 2021 | SOLD |
TOYO - Si-180-6Clamping Force 180 ton ... | Injection molding machine up to 250 T | 2017 | SOLD |
ARBURG - 420c 1000-290 GoldenClamping Force 100 ton , Shot Weight (Max) 132 g Around 13.000 hours worked
Handling robot NOT included, no Euromap connection... | Injection molding machine up to 250 T | 2011 | SOLD |
ENGEL - E-Duo 1340/700Clamping Force 700 ton , Shot Weight (Max) 680 g Hybrid machine. 700ton 60mm screw.... | Injection molding machine from 500 T up to 1000 T | 2013 | SOLD |
KRAUSS MAFFEI - KM130/380/CXClamping Force 130 ton , Shot Weight (Max) 182.9 g Trial possible
Used materials: PS/PP/PE/PA/TPE
FInal product: PE
working hours: 48.237 h
Hydronic
CE certified
Machines manuals included
Handlings/robots not included... | Injection molding machine up to 250 T | 2007 | SOLD |
LG - LGH2500MClamping Force 2500 ton , Shot Weight (Max) 10880 g Injection unit code: i215
Injection capacity PS: g 10880 - oz 383
Injection capacity PE: g 8630 - oz 304
Max. screw speed: rpm 90/90/75 (90/85/65)
Mold opening force: ton 165
Clamping stroke: mm 2700
Mold close speed (High): m/min 43 (35.8)
Mold clos... | Injection molding machine from 1000 T | 2003 | SOLD |
ALESSIO - PE 0-8/DA Chamber diam 1000 mm
Pressure in the chamber 0.5 bar... | EPS pre-expanding | 2008 | SOLD |
ARBURG - ALLROUNDER SELECTA 470S 1000 - 150Clamping Force 100 ton , Shot Weight (Max) 97 g Hours worked 95242 (24 may 2021)
Total electric consumption 27,9 kW
No robot included
Conveying belt belt included... | Injection molding machine up to 250 T | 2004 | SOLD |
FERROMATIK MILACRON - K-TEC 175- 1650 SClamping Force 170 ton , Shot Weight (Max) 375 g Used Ferromatik Milacron K-TEC 175S from 2008
Conveyors included
working hours: 73.200 (23-07-21)
three machines available
the machine will be disconnected and stored in a warehouse in august 2021... | Injection molding machine up to 250 T | 2008 | SOLD |
PLASTIC METAL - Unyka 700Clamping Force 700 ton , Shot Weight (Max) 3600 g Mov. Platen stroke: 1000mm
Dry cycle max. stroke: 18 N/min
EUROMAP 7000H/6390
... | Injection molding machine from 500 T up to 1000 T | 2006 | SOLD |
LS CABLE LTD - ID 1800HM i150*AClamping Force 1800 ton , Shot Weight (Max) 7750 g -Robot included.... | Injection molding machine from 1000 T | 2006 | SOLD |
BATTENFELD - HM300/1330 UNILOG B6SClamping Force 300 ton , Shot Weight (Max) 686.956 g Air valve 4 - free programing
Hydraulic open/colse nozle valve
Hot runner zones - 16
Core pullers x 2... | Injection molding machine from 250 T up to 500 T | 2011 | SOLD |
SACMI - IPS 220 , Neck Type30/25
SACMI IPS 220, capacity 20.000 units/hour
Includes auxiliaries and cooling unit.
Mould SACMI 48 cavities, 32 gr, 30/25
Very low hours
Available immediately!
... | Injection moulding machine for PET preforms | 2012 | SOLD |
KRAUSS MAFFEI - KM 200-1000CClamping Force 200 ton Control MC4
... | Injection molding machine up to 250 T | 1999 | SOLD |
NEGRI BOSSI - V570Clamping Force 560 ton , Shot Weight (Max) 3700 g Negri Bossi injection molding machine. ... | Injection molding machine from 500 T up to 1000 T | 2001 | SOLD |
DEMAG - Ergotech 5000-5200Clamping Force 500 ton , Shot Weight (Max) 2550 g Still running and not only in dry condition
6-axis-Fanuc robot M16i (2001) included
conveyor belt and safety fence included
Robot interface
Control NC10
Without hopper
6-fold cascade pneumatic
Shot weight: 2.550gr./hp... | Injection molding machine from 500 T up to 1000 T | 2001 | SOLD |
ENGEL - DUO 1800/350Clamping Force 350 ton , Shot Weight (Max) 694 g 14.000 working hours.... | Injection molding machine from 250 T up to 500 T | 2016 | SOLD |
TOYO - SI 450 IIIClamping Force 440 ton , Shot Weight (Max) 892 g Electrical machine... | Injection molding machine from 250 T up to 500 T | 2008 | SOLD |
SEPRO - PIP 3500 S8 VISUALRobot TypeCartesian , Entry PointTop Single beam with 2 mobiles (can be operated separately or in duo)
Year of commissioning :
- 2008 for the mobile N°1,
- 2010 for the mobile N°2
Maximum stroke X1/X2 : 10000 mm
Maximum stroke Y1/Y2 : 920 mm
Maximum stroke Z1/Z2 : 2400 mm
- Rotation o... | Robot | 2008 | SOLD |
HUSKY - INQ400 P120/130/E140 , Neck TypePCO
Husky INQ400 P120/130/E140 injection molding machine, year 2000
Includes:
- 96-cavity mold, 21.7gr, PCO 1881, cycle time: 12 sec
- Piovan DS 531 dryer
- 5300-kg hopper
122.850 hours worked (25 May 2021)
In production
Available in February 2023... | Injection moulding machine for PET preforms | 2000 | SOLD |
HOME MADE - Moulds for cratesProduct Description Fruit/vegetables crate moulds. 1x crate mould
Dimensions: 30x50x12 low model
Mold dimensions: 685x890x505
Weight: 320g
last revision 2016
1x crate mould
Dimensions: 30x50x12
Mold dimensions: 790x1000x490
Weight: 340g
Last revision 2018
1x crate mould
Dimensions: 30x50x13,... | Injection moulding moulds | 2018 | SOLD |
DEU - DG500Clamping Force 500 ton , Shot Weight (Max) 2221 g included: Robot, dryer, feeder and conveyor... | Injection molding machine from 500 T up to 1000 T | 2004 | SOLD |
ENGEL - DUO 7050/500Clamping Force 500 ton , Shot Weight (Max) 3785 g Opening force: 190
Opening force with pressure pad: 360
Mold weight max: 8000kg
Screw stroke: 480mm
Injection rate with increased pressure: 745 cm^3/sec
Injection rate with accumulator: 1520 cm^3/sec... | Injection molding machine from 500 T up to 1000 T | 2011 | SOLD |
PIOVAN - CA 3011 EITransfer MediumWater
Chiller Piovan
Model: CE 3011 EI
Year: 2005
Power: 75 Kw
Machine still installed... | Heating and cooling unit for moulds and dies | 2010 | SOLD |
BMB - KW28PI/1300Clamping Force 280 ton , Shot Weight (Max) 788 g Working hours: 64 000 (June 2022)
Shot weight for PS... | Injection molding machine from 250 T up to 500 T | 2010 | SOLD |
BMB - KW28PI/2200Clamping Force 285 ton , Shot Weight (Max) 1072 g Working hours: 64 620 h (June 2022)
Shot weight for PS... | Injection molding machine from 250 T up to 500 T | 2010 | SOLD |
ENGEL - 650/120 Tech EcodriveClamping Force 120 ton , Shot Weight (Max) 360 g Shot volume: 393 ccm
Ejector: hydraulic
Clamp type: hydraulic
Control system:
CC 300 - Touchscreen
Additional equipment:
The tie-bar-less machine, energy-saving, very quiet
Operating hours: ca. 18.500 h in automatic mode
Euromap 67
Interface of ro... | Injection molding machine up to 250 T | 2015 | SOLD |
NPM - PLASTIC METAL - Unyka 130Clamping Force 130 ton , Shot Weight (Max) 311 g ... | Injection molding machine up to 250 T | 2000 | SOLD |
FERROMATIK MILACRON - K-450-SClamping Force 450 ton , Shot Weight (Max) 1540 g Robot Engel 43/1-C & Dosing unit available (ask for price)... | Injection molding machine from 250 T up to 500 T | 1999 | SOLD |
FERROMATIK MILACRON - K-275-SClamping Force 275 ton , Shot Weight (Max) 1031 g Robot Engel 43/1-C & Dosing unit available (ask for price)... | Injection molding machine from 250 T up to 500 T | 1998 | SOLD |
ENGEL - ERC 43/1-CRobot TypeCartesian , Entry PointTop 2x units available (price per unit)... | Robot | 1999 | SOLD |
TOYO - Serie Si-280 IV-I450BClamping Force 280 ton , Shot Weight (Max) 1329 g IMM Toyo Serie Si-280 IV; year 2010
Available ancillaries for PET preforms with post-cooling = no. 3 cooling stating, robot, supporting structure, loader and dryer for PET (Price on request)... | Injection molding machine from 250 T up to 500 T | 2009 | SOLD |
HUSKY - INQ 90 RS95/95 Preform Weight (Max) 16 , Neck TypePCO & BPF
Used Husky system for preforms
Model: INQ 90 RS 95/95
Hopper Piovan T1500IX
Resin dryer Piovan DSN523HE
Piovan Mould Dryers RPA 1500
No Chiller
it is possible to choose of one of the following molds:
Mold 16 cav. – 1 Female half tha... | Injection moulding machine for PET preforms | 2001 | SOLD |
BOCA - Moulds for recycling containersProduct Description Moulds for recycling containers -Mold for square recycling container, capacity 3.000 l
-Mold for garbage bin, capacity: 1.700 l + flat lid
-Mold for square recycling container, capacity 2.500 l
-Mold for round recycling container, capacity 3.000 l
-Mold for round recycling contain... | Rotomoulding mold | 2006 | SOLD |
BMB - KW45PI/2200Clamping Force 450 ton , Shot Weight (Max) 1072 g Working hours: 50264 h (june 2022)
Shot weight for PS... | Injection molding machine from 250 T up to 500 T | 2010 | SOLD |
FERROMATIK MILACRON - K-TEC 320-1650Clamping Force 320 ton , Shot Weight (Max) 649 g New pump: year 2021
Robot Apex... | Injection molding machine from 250 T up to 500 T | 2010 | SOLD |
BATTENFELD - BA 4500/2800 HMClamping Force 450 ton , Shot Weight (Max) 1132 g ... | Injection molding machine from 250 T up to 500 T | 1997 | SOLD |
WINDSOR - W 1600-124Clamping Force 1600 ton , Shot Weight (Max) 5865 g ... | Injection molding machine from 1000 T | 1992 | SOLD |
HOME MADE - ChairProduct Description Mold for chair, with backrest and armrest , Number Of Cavities 1 3 backrest designs available.
Dimensions and weights are as follows:
55 x 55 x h80 mm
2.100 gr e 2.800 gr
Needs 900ton injection machine.
Cycle time: 40''-45''... | Injection moulding moulds | | SOLD |
KRAUSS MAFFEI - KM80/380CXClamping Force 80 ton , Shot Weight (Max) 140 g Used in cleanroom; ... | Injection molding machine up to 250 T | 2007 | SOLD |
SANDRETTO - MEGA 2300 - 38000Clamping Force 2300 ton , Shot Weight (Max) 25798 g ... | Injection molding machine from 1000 T | 2000 | SOLD |
BMB - E-KW 35Pi/2200 HybridClamping Force 350 ton , Shot Weight (Max) 1072 g EuroMap 67
Hybrid machine. ... | Injection molding machine from 250 T up to 500 T | 2015 | SOLD |
HOME MADE - 15lt Bucket and LidProduct Description Molds for bucket and lid, 15Lt , Number Of Cavities 1 Dimensions:
D645 x H760 mm e D555 x H370 mm
Weights:
590 gr and 155 g ... | Injection moulding moulds | 2000 | SOLD |
HOME MADE - Bucket&lid 17ltProduct Description Used molds for bucket and lid. Dimensions as follows:
Bucket
D 305 X H 315 mm
Weight: 575g
Lid
D 312 X H 20 mm
Weight 170g... | Injection moulding moulds | 2000 | SOLD |
HUSKY - GL300 P100/120 E100
Complete system injection moulding machine for preforms Husky GL300 PET P100/110 E100
- Resin Dryer, Piovan DS 526 year 1999
- Hopper : Piovan T3000IX year 1999
- Mould Dehumidifier: Fasti MSP20C/N year 2002
- Chiller, NOT Included
- Conveyors : ... | Injection moulding machine for PET preforms | 1998 | SOLD |
ARBURG - Allrounder Centex 320 C 600 - 100Clamping Force 60 ton , Shot Weight (Max) 41 g Machine used in clean room.... | Injection molding machine up to 250 T | 2005 | SOLD |
BMB - eKW 48 PI/2200 HYBRIDClamping Force 480 ton , Shot Weight (Max) 846 g Hybrid machine
Euromap67... | Injection molding machine from 250 T up to 500 T | 2014 | SOLD |
BATTENFELD - HM 240/1330Clamping Force 240 ton Brand: Battenfeld
Model: HM 240/1330
Year: 2013
Clamping Force: 240ton
Daylight between tie-bars: 630-570
Screw diameter: 65
Robot connection EuroMap12: yes
Core Pull: 1
Robot Wittmann W821 - 0920
Working hours: 31.600... | Injection molding machine up to 250 T | 2013 | SOLD |
TURRA - FTV 300-80Clamping Force 30 ton , Shot Weight (Max) 150 g -Sliding Table
- Working hours: 7.000
** 3 Machines available, different years:
Turra FTV year 1999-Price on request
Turra FTV 2003- Price on request
Turra FTV 2004- Price on request.... | Injection molding machine up to 250 T | 2005 | SOLD |
HUSKY - Kortec SL 160 RS45/45:RS22/18Preform Weight (Max) 4
Husky Kortec model SL160 RS45/45:RS22/18
Made in 2000
includes: Matsui pellet loader, Piovani Dryer and Hopper
4 cavity preform mold for two layer preforms with EVOH
Shot size- 144 grams
Machine is dismantled and cannot be seen running
... | Injection moulding machine for PET preforms | 2000 | SOLD |
KURTZ - K1322 Used EPS shape moulding press Kurtz
- Type:K - 1322
- Manufactured: 1988
- for manufacturing of EPS boards 2000 x 1200 x 100-500 mm
- incl. Moulding tool
- incl. Vaccuum system.
Currently dismantled, pictures show current condition and when in prod... | EPS Shape Moulding Machines | 1988 | SOLD |
KRAUSS MAFFEI - KM 80-90 C2Clamping Force 80 ton , Shot Weight (Max) 36 g Working hours: 38 000... | Injection molding machine up to 250 T | 2005 | SOLD |
KRAUSS MAFFEI - 350-1650 B2Clamping Force 350 ton , Shot Weight (Max) 941 g ... | Injection molding machine from 250 T up to 500 T | 1993 | SOLD |
NPM-PLASTIC METAL - UNYKA 270Clamping Force 270 ton , Shot Weight (Max) 755 g one e-card of the screen must be replaced... | Injection molding machine from 250 T up to 500 T | 2000 | SOLD |