POLYTYPE - BDM-682Number Of Colours 5 , Rim Diameter (Max) 185 mm Machine is producing PET cups and the factory where machine is located is controlled under strict food safety regulations so hygiene and safety production process is top priority as the products make direct contact with food.
So the machines are we... | Cup printing machines | 2017 | |
KIEFEL - KMD 78 SPEED Material PS OPS, EPS, PP, PE, PVC, PET, CPET, PLA , Forming Area (Vxh) 760 x 540 MM Film Unwinding Station KA 83
Coil dimension max. - Width 830mm / Ø1200mm
Coil Core Dimension - Ø76mm / 152mm
Unwinding Shaft / Coil Weight max. - Ø70mm / 1000KG
Additional Switch for manual unreeling
Film Pre-Heating Station KVH 110
Film width max.... | Thermoformer | 2017 | |
BATTENFELD-CINCINNATI W.M. WRAPPING MACHINERY SA - BEX/ FT700 Material PS PS, PP , Forming Area (Vxh) 685x340 Complete line for production of cups / vending cups consists of:
4 layers sheet extrusion line Battenfeld-Cincinnati + WM/BC FT-700 thermoforming machine
Material to process PS / PP.
The same die head for multilayer PS and mono PP sheets
Sheet extr... | Complete thermoforming sheet extrusion lines | 2012 | |
GN - 1914 DM Material PP BOPS, OPS, GPPS, PS, HIPS, PVC, PET , Forming Area (Vxh) 482x355 Maximum knife length: 5000 mm
Maximum sheet width: 533 mm
Maximum material roll diameter: 1000 mm
Thermoplastic materials processed on the machine: PP, BOPS, OPS, GPPS, PS, HIPS, PVC, PET
Maximum dry cycles (without material) per minute: 50
Main... | Thermoformer | 2017 | |
W.M. WRAPPING MACHINERY SA - INTEC 1000 Material HIPS, GPPS , Forming Area (Vxh) 1000*1000 mm Complete thermoforming line: Extruder EDV 120, Thermoforming machine WM TFT 1000, Grinder CMG and Automatic packing machine STS
Product: Plates
EXTRUDER:
Main extruder 120-35 D mm
Working shhet width 1060 mm
Sheet thickness 0.2-0.5mm
Output capa... | Complete thermoforming sheet extrusion lines | 2010 | |
OMV - F-88 Material PS,PP , Forming Area (Vxh) 1280 x 750 Extrusion line OMV D120 F88
Product: plate and bowl
Thermoforming machine F88 including
Max. Forming area - 1280 x 750 mm
Max. forming depth – 50 mm
Max.pos.forming depth – 15 mm
Max. sheet width – 1380 mm
Oven
Forming/cutting press
Stacking/... | Complete thermoforming sheet extrusion lines | 2011 | |
ILLIG - HSP 35 BMachine TypeBlister , Material 350x250 Max working area : 350x250mm
Max blister depth / height of sealing receiver : 130mm
Number of sealing receivers : 4
Electrical consumption of sealing heater : 1.75 kW
Total electrical consumption : 2.15 kW
Sealing force : 13 kN
It is in excellent wor... | Blister and Skin | 1989 | |
ILLIG - RD53 Material PP, HIPS, PS, PVC, PET , Forming Area (Vxh) 500x350
The machine will be available from middle October.
Operating hours: 81.000 h, still in production
Stations: Forming, Cutting and Stacking
Min Forming Area: 300 x 160 mm
Film width: 540 mm
Height of Forming Above-Below Material Level: 100 / 40 mm... | Thermoformer | 2004 | |
VAN DAM - CP 406 MNumber Of Colours 6 , Rim Diameter (Max) 165 mm Maximum taper 15 degrees
Maximum print height 120 mm
Maximum print length in 4 BLANKET MODE: 340 mm (Ø 108 mm) M
Maximum print length in 2 BLANKET MODE: 425 mm (Ø 135 mm) option
Maximum mechanical speed 400 products per minute The actual maximum pri... | Cup printing machines | 2022 | |
OMV - F-85 Material PS , Forming Area (Vxh) 1000x730 Sheet extrusion line, thermoforming machine OMV F-85, grinder TRIA 1200
Product: Plate
EXTRUDER:
Main extruder 100-35:1
Motor CC
Flat die: width 1100 mm
Calender 501-A-T 1200
Thermoforming machine OMV F85
Max. Forming area 1000*730 mm
Max. formi... | Complete thermoforming sheet extrusion lines | 2005 | |
KIEFEL - KMV 75 D Material BOPS, PP, HIPS, PS, PVC, PET, ABS , Forming Area (Vxh) 750 x 540 mm
Pick up in September
Operating hours: 21.066 hours
Cycle per minute max: 30 cycles/min
Formed parts height positive: 150 mm
Formed parts height negative: 50 mm
Film width max: 800 mm
Forming station force: 10 tons
Punching station force: 70 ton... | Thermoformer | 2008 | |
GEISS - DU 4000 x 2000 FZNumber Of Axes 5 , Work Area (Lxwxh) 4400x2400x780 Used only for test (Aluminum, wood, plastic, metal processing)
X axis 4400 mm
Y axis 2400 mm
Z Axis 780 mm
B axis 210'
C Axis 520'... | CNC Routers | 2014 | |
GEISS - DU 2500 Material ABS, PS ,HDPE etc , Forming Area (Vxh) 2500x1500 Pneumatic table drive
Quartz heaters
Automatic Feeding System... | Thermoformer | 1999 | |
GN - 1914 DM Material PP BOPS, OPS, GPPS, PS, HIPS, PVC, PET , Forming Area (Vxh) 482x355 Maximum knife length: 5000 mm
Maximum sheet width: 533 mm
Maximum material roll diameter: 1000 mm
Thermoplastic materials processed on the machine: PP, BOPS, OPS, GPPS, PS, HIPS, PVC, PET
Maximum dry cycles (without material) per minute: 50
Main... | Thermoformer | 2016 | |
RIGO - Milano Material PP PE , Forming Area (Vxh) 600x560 mm Forming Area Max - 600 x 560 mm
Forming Area min - 400 x 300 mm
Speed - 1500 cycle/h
Automatic quickly change mould
Preheater for PP
Heated die with diathermic oil thermoregulator
PLC Siemens... | Thermoformer | 1999 | |
MECANUMERIC - NORMAPROFILNumber Of Axes 5 , Work Area (Lxwxh) 3000x2000x950 5-axis trimming or machining center for plastic materials
NORMAPROFIL 5 axis continuous machining for 3D machining applications
Strokes 3200x2200x1050 (without tool holder)
Or 3000x2000x950 in 5 axes
External dimensions : 6400x4200x5100
Equipped ... | CNC Routers | 2000 | |
HAMER - BPC-23Machine TypeBlister , Material 300x200 The BPC23 integrates all the necessary operations for the manufacture of the blister, from the thermoforming from a plastic roll, through the loading of the product, sealing, individual punching of each of the figures and expulsion of the finished ... | Blister and Skin | 2010 | |
GEISS - T9 Material PP,PS,PVC,ABS,HIPS , Forming Area (Vxh) 4000x2000 Fully automatic vacuum machine that has been working only for one month in an R&D center
Automatic Sheet loader
Fixed window frames... | Thermoformer | 2010 | |
ILLIG - SB100C4GMachine TypeSkin , Material 500x960 Skinpackaging, blister and universal forming machine
The machine has :
1 conveyor
1 forming machine
1 block carver shooter with GUILLOTINE + holes of brooch awl-matrix, longitudinal separation by Thumb wheels of cut.
Cardboard size : 495x955 mm
She... | Blister and Skin | 1985 | |
MOSS - MO 2013Number Of Colours 4 , Rim Diameter (Max) 110 mm Production: 16 000 cups/h
Taper of container: from 3 to 10 degrees
Max print area cliche holder roller: 325 mm
Max Clichè holder roller diameter: 335 mm
Total clichè lenght: 375 mm
Central roller diameter: 335 mm
No. of panels of central roller: 3
M... | Cup printing machines | 1997 | |
MOSS - MO 2053Number Of Colours 6 , Rim Diameter (Max) 110 mm Production: 16 000 cups/h
Taper of container: from 3 to 10 degrees
Max print area cliche holder roller: 325 mm
Max Clichè holder roller diameter: 335 mm
Total clichè lenght: 375 mm
Central roller diameter: 600 mm
No. of panels of central roller: 4
E... | Cup printing machines | 2003 | |
MOSS - MO 2013 UVNumber Of Colours 4 , Rim Diameter (Max) 110 mm Production: 16 000 cups/h
Taper of container: from 3 to 10 degrees
Max print area cliche holder roller: 325 mm
Max Clichè holder roller diameter: 335 mm
Total clichè lenght: 375 mm
Central roller diameter: 335 mm
No. of panels of central roller: 3
U... | Cup printing machines | 2003 | |
GEISS - FZ 2000 x1000 Number Of Axes 5 , Work Area (Lxwxh) 2450 x 1400 Travel / Speed / Acceleration
X axis : 2450mm / 120000mm/min / 7000mm/s2
Y asis : 1400mm / 100000mm/min / 7000mm/s2
Z axis : 800mm / 60000mm/min / 1200mm/s2
B axis . 285º / 14275º/min / 1200 º /s2
C axis : 520º / 21600º/min / 1200º/s2
Milling spin... | CNC Routers | 2000 | |
ILLIG - RDM 50K Material PS,PP , Forming Area (Vxh) 500x280 Includes a 95 mm diameter HIPS cup mould and 14 sets of interchangeable insert parts with capacities from 0.2 to 0.5 litres
Maximum material width: 525 mm
Clamping force: 15 000 daN
Number of cycles: 40/min.... | Thermoformer | 1987 | |
MOSS - MOSS MO-2012/5 + 1 SPUNumber Of Colours 5 Automatic offset machine for printing 2-5 colours on eggs trays.
Tray size range
Length 250-320 mm
Width: 220-225 mm
Printing area 120x290 mm
Number of the printing colors 2-5
Production capacity 3750-5000 psc/h
Printing plate thickness 0,83 mm
... | Lids printing machines | 2011 | |
KOCH - KBS-PT Machine TypeBlister , Material 250x500 Automatic intermittent motion blister packaging machine with a capacity of up to 15 cycles per minute.
Fast format changeover, high packaging capacity and flexibility in processing different formats and materials. Sealing pallets can be changed very... | Blister and Skin | 1997 | |
ILLIG - RV 53 Material PS, PET, PP , Forming Area (Vxh) 500x350 mm Forming area: max. 500x350 mm, min. 300x100 mm
Height of forming above/below working level: 100/30 mm
Film width: max./min. 550/340 mm
Film thickness: max. min./max. 0,3/1,3 mm
Speed: 18 cycles/min depends on material
Pneumatic system for table and c... | Thermoformer | 1998 | |
GN - 2220C Material OPS, PVC; HIPS, PP, PET , Forming Area (Vxh) 560 x 508 mm Max. material roll diameter 711 mm
Max. knife length 6350 mm
Material thickness range 0,15-1,00 mm
Max. Sheet width 595 mm
Max. dry cycles per minute 25
Power consumption 5,5 kW/h (approx.)
Min. processing air pressure 6,8 bar
Air Consumption 1360 l... | Thermoformer | 2000 | |
OREU - MAC-1PHSU EMachine TypeBlister , Material 350x500 Dimensions: width 156 cm x height 205 cm x length 620 cm.
Molding area: 350 x 500 mm.
Automatic unwinding control.
Positive and negative molding with cooling table.
Individual temperature regulation (15 heating elements).
Positive cutting press.
Shea... | Blister and Skin | 1999 | |
ILLIG - HSA 50 RDMachine TypeBlister , Material 500 x 300 mm Illig HSA 50b :
Max sealing area : 500 x 300 mm
Max blister depth : 80mm
Max carton size :
1-fold : 500 x 300 mm
2-fold : 248 x 300 mm
3-fold : 164 x 300 mm
4-fold : 122 x 300 mm
5-fold : 97 x 300 mm
6-fold : 80 x 300 mm
7-fold : 68 x 300 mm
8-fold ... | Blister and Skin | 1982 | |
GEISS - DU 1000x1500 T8 Material PP/ABS/PS/PE/PVC/ABS-PMMA/PC/PEI/PETG , Forming Area (Vxh) 1500x1000 Max sheet size 1010 x 1510 mm
Min sheet size 510 x 510 mm
Max mold height H500
Hours worked approximately 28,000h
Halogen lamps
Availability March 2023... | Thermoformer | 2006 | |
MOSS - MO3000/3 SPUNumber Of Colours 4 Printing machine for egg trays + LABEL MACHINE
Upper 3-color printing + lacquering on lower barcode
Lacquering machine
4-station loading with pick and place handling
Single-station stacking unloading with accumulation
Package handling by chain with ... | Lids printing machines | 2007 | |
PERROS - SV-VF-15-10-06 Material ABS, PETG, PS , Forming Area (Vxh) 1000x1500 The machine has ceramic resistors and vacuum pump.
Control system model: SIMATIC OP 37
The machine does not have plate loader neither automations for rolls processing.
1 cycle of production takes around 10 minutes for material width of 8 mm
Moulds ar... | Thermoformer | 2002 | |
OMSO - DM 44/6NNumber Of Colours 6 , Lid TypeRound & Square The machine has :
- The loading hopper
- Electronic processing
- UV tunnel
- Manual Stacker
Production/hour max. :
for a diameter < 125mm : 40.000 pieces
for a Ø125mm to Ø290 mm : 330pcs / min or 20.000pcs / h
- Ø Max of lids : 125mm in 2 lanes &... | Lids printing machines | 2011 | |
BANDERA - CTR 1000/80MaterialsPS , Film Width (Max) 1000 mm Extruder single screw type CTR 65/35;
MANUAL SCREEN CHANGER type COFIT FC manual
Electronic probe for pressure and melt control MOD. DYNISCO PT 484.
Flat die head TYPE LF - LFS - FP - 1300
3 Zone electric panel and double electronic pressure sensor
P... | Sheet monoextrusion lines | 1990 | |
OMV + KIEFEL - EXD 80 Material PP PS , Forming Area (Vxh) 780x700 mm EXTRUDER:
Type: OMV EXD80
Width: 1000 mm
Coil width : 780 mm
Material Thickness: min 0,23 mm - Max 0,50 mm
Diameter: 80 mm
L/D: 35/1
8 Temperature control zones: 6 for extruder Cylinder, 1 for feeding mouth, 1 for cooling center
Volumentric... | Complete thermoforming sheet extrusion lines | 1992 | |
ATEM - Modular Rapid Material ABS PET, PC , Forming Area (Vxh) 1810x860 mm Resistance: total 112 (56 up and 56 down) size mm 60x250 and 600 W/cd with a total power of 67,2 kW.
Vacuum pump 4 kW with flow 165 m3/h and pression 0,66 mbar
PLC Siemens with software 6GK1561-3AA01 for the comunication with PC and 6GK1713-5CB61-... | Thermoformer | 2005 | |
THERMOWARE - THW 3516 - THW 3500 Material EPS Pack of 4 EPS foam cup machines, molds, 2 packaging units, 2 tester units (1 tester THW 125E year 2005 & 1 tester THW 3320 year 2008), 1 pre-expander THW VA 40 year 2005 & 4 Silos
Reason for selling: Change of production field.
Working hrs: 50.000 to... | Thermoformer | 2008 | |
UNION - XPET lineMaterialsPET , Film Width (Max) 1100 mm New line for XPET production
Output capacity: up to 300 kg/h
Film density: 75-100 kg/m3
Film thicknes: 1.5 -2.5 mm
Film width: 550 mm (2 sheets) or 1100 mm х 1 (1 sheet)
Rolls diameter: max. 1000 mm
Height of screw centerline: 1050 mm
Feeding and g... | Sheet coextrusion lines | 2018 | |
KIEFEL - KL 1 SH 52 BFS Material PET, PVC, PP, PS, HIPS , Forming Area (Vxh) 540x420 3 stations: forming/cutting - punching - stacking
Forming Area: 540x420mm
Film Width: 570mm
Foil thickness: min 0,2mm - max.3mm
Depth of draw pos/neg: 140mm
Materials: PET, PVC, PP, PS, HIPS
Cycle/min min-max : 5-40
Working hours : 41983
Preheater... | Thermoformer | 1993 | |
VILLA - NPO 120 Material PET, PVC, PP, PS, HIPS , Forming Area (Vxh) 540x500mm 2 stations : Forming - Cutting
Film Width: 560mm
Output min-max 5-18 cycles/min... | Thermoformer | 2002 | |
BZT - PFB 3020-G GantryNumber Of Axes 5 , Work Area (Lxwxh) 1000x1500x600
With the milling machine you can mill all kinds of plastics and aluminium for mould making.
5-axis gantry milling machine
BZT-PFB 3020-G Gantry
- Travels for 3-axis operation:
X - axis 1835 mm speed max 16 m/min
Y - axis 3410 mm speed max 16 m/min
... | CNC Routers | 2016 | |
GN - 2220C Material OPS, PVC; HIPS, PP, PET , Forming Area (Vxh) 560 x 508 mm Max. material roll diameter 711 mm
Max. knife length 6350 mm
Material thickness range 0,15-1,00 mm
Max. Sheet width 595 mm
Max. dry cycles per minute 25
Power consumption 5,5 kW/h (approx.)
Min. processing air pressure 6,8 bar
Air Consumption 1360 l... | Thermoformer | 1997 | |
KIEFEL - KMV 50 D Material PS, OPS, EPS, PP, PE, PVC, APET, CPET, RPET , Forming Area (Vxh) 500 x 350 Max Tool dimensions: 516 x 366 mm
Forming height above - below Material: 120/40 mm
Maximum sheet width: 545 mm
Stacker A/B
Max. cycles/min: 35... | Thermoformer | 2002 | |
UNION - 130MaterialsPP PS , Film Width (Max) 900 mm Die Head width: mm 1050
Die gap: mm 0.1 to 2
Degassing
Electronic System thickness control system... | Sheet monoextrusion lines | 2007 | |
T2 - 83100/15-35 PMI Material PET,PP,PS , Forming Area (Vxh) 830x1000 Thermoforming machine for egg containers
Max sheet width: 880 mm
Max tool size: 850x1020 mm
Platen clamping force: 35,000 kg
Horizontal cutting unit T2 8036/15-15 PTM... | Thermoformer | 2007 | |
MOSS - MO3000/3 SPU Number Of Colours 3 , Lid TypeSquare Printing machine for egg trays
Upper 3-color printing + lacquering on lower barcode
Lacquering machine
4-station loading with pick and place handling
Single-station stacking unloading with accumulation
Package handling by chain with constrained dist... | Lids printing machines | 2007 | |
ILLIG - FS 35Machine TypeBlister , Material 330x300mm It has been used with the following films:
Bottom film
Width: 315 mm
Thickness: 350 µm
Top film/cover film
Width: 300 mm
Thickness: 112 µm
Feeding system Roll fed
Depth of draw positive/negative 65mm/65mm
Cycles / min: 20
Closing force: 20 kN
... | Blister and Skin | 2004 | |
ILLIG - SB 74 C3 Material PET , Forming Area (Vxh) 500X700 Thermoforming capacity 500 X 700 X 100.
With the following options:
- Waterproof housing with bubble system.
- Heating transmitters selectable by switches
- Possibility of mounting reduced frames and width reduction beams.
- Set of h... | Thermoformer | 1981 | |
ILLIG - ZSM45Trimming Area (Lxw) 500x450 , Material Type PVC, PET, PS, HIPS, PET, rPET, PLA, corrugated paper, LDPE, HDPE Motor: 0.55kw/1.5A
Max cut width: 450mm
Max. cut length: 500mm
Max cut heigh: 120mm... | Trim presses | 1970 | |
T2 - 5035/15-10 Material PE , Forming Area (Vxh) 550x490 Punching press and thermoforming machine t2 for PP/PET eggs trays (mould not available)
Punching press
Max widh material 640 mm
Cutting dimensions 640x340 mm
Depth of draw 120 mm
20-80 cycles min
Clamping force 10000 kg
Thermoforming machine
Mater... | Thermoformer | 1999 | |
RIGO - Speedy Material PP , Forming Area (Vxh) 800x360 Materials PP-HIPS
Preheater
Min mould area 480x220 mm
Clamping force 400.000N
Mechanical cycles /min max 35... | Thermoformer | 2005 | |
VILLA - BR3 1510 , Forming Area (Vxh) 1500 x 1000 mm Max. Forming Area:1500x1000 mm
Material: ABS, PST, PC, HDPE, PMMA
Film depth positive and negative:600mm
Material Thickness: min 1 mm - max 10 mm
Movement: pneumatic
Power installed: 65 Kw
Power Ceramic heater: superior and inferior 650 Kw, central 4... | Thermoformer | 2000 | |
ATEM - SS CV , Forming Area (Vxh) 3000x2000 Thermoforming area: 3000 x 2000 mm
Depth of draw: 500 mm
Material: ABS, PP,PE,PET,PMMA,PC,PS
Material thickness: min 2 mm - max 12 mm
Movement looking sheet: hydraulic + bolt
Movement upper and lower lamps : pneumatic
Movement table: hydraulic
Moveme... | Thermoformer | 1996 | |
GEISS - 840 cNumber Of Axes 3 , Work Area (Lxwxh) 2000x1000x560 Siemens840 C controller... | CNC Routers | 1993 | |
VAN DAM - 570 Com IIINumber Of Colours 6 , Rim Diameter (Max) 135 mm 6 colors
Length of stripper bar : 167mm
Length of image : 370mm max
Print diameter : 115 mm max
Cup rim diameter : 135mm max
Height of cup : 150mm max
Mechanical speed : 350 cpm (max)
Uv drying
Corona treatment Softal
Spare parts included : see pic... | Cup printing machines | 1994 | |
BATTENFELD-CINCINNATI - OLV 400/1050Materials PP, PS , Film Width (Max) 850 mm Complete extrusion line for the production of PP and PS film
2 dosing units Moretto S.P.A., 2014
Max. film width 850 mm
Film thickness 300 ÷ 2000 microns
Productivity 400kg / hour
Calender 3 cylinders diam 400 mm
Double rewinder
Max. film width 1000... | Sheet monoextrusion lines | 2012 | |
OMGProducts TypeContainer Materials: PVC, PS, PET, PP, BOPS.
A set of moulds for container production.
Dimensions:
227х178х40
227х178х70
Also included in the offer:
Frame
Cutting tool
Stacking unit
These moulds were previously used in production on OMG lines (OMF\PVE 52 P... | Molds | 2008 | |
AGAMI - A4 Material PS 4-s linear thermoforming vertical machine
Processed material - Plastic tape as a roll (PS)
Finished product-Thermoformed plastic bottles
Productivity
- 6000 bottles of 200ml per hour
- 28 cycles / minute/ line
A mould cooling device and a plastic ... | Thermoformer | 2013 | |
KIEFEL - KL52 BFS Material ABS, PS,OPS,EPS,PP, PE, PVC, APET, CPET , Forming Area (Vxh) 540x400 Used to produce lids for yoghurt pots
Min thermoforming area 250x200 mm
Max sheet width 560 mm
Clamping force thermoforming and cutting station 500kN
2 stackign unit available, one traditional and one for round products... | Thermoformer | 1996 | |
PARCO - PARCO 2Z Material PET, PP, PS, PVC , Forming Area (Vxh) 540x390 3 stations : forming - cutting - stacking
Materials : PET, PP, PS, PVC
Max mold size : 550x450
Max sheet width : 590mm
Depth of draw : 120mm
Sheet thickness min-max : 200-1500 microns
Output : 20 cycles/min
Mold closing force : 2 bar
Feed length : 45... | Thermoformer | 2000 | |
MORETTI - VPK-C 76 Material PET, PS, PVC , Forming Area (Vxh) 700x600 Max cycles/min : PS 25-30/PP 8-20
Max sheet width : 800 mm... | Thermoformer | 1994 | |
OMSO - SERVOCUP 237 / 7 UVNumber Of Colours 7 , Rim Diameter (Max) 160 mm Production hours less than 3.000 Hours
It can print conical pots, flower pots, cups...PS/PP
Technical specifications
Min. diameter . mm 50
Max. diameter mm 160
Min. height mm 40
Max. height mm 180
Max. height Printing mm 180
Taper ° 2 to 15
Max. sp... | Cup printing machines | 2011 | |
JOHN BROWN - EGAN extrusion line, Thermoformer C-2104 and Trim Press T-100 Material PS , Forming Area (Vxh) 965.2x1270 Extrusion line John Brown Egan Model 4522-D and H6026D
Screw diameters:
88.9mm L/D 24:1
114.3mm L/D 32:1
Production capacity: 150kg/h
Thicknesses: min 0.254mm, Max 8.89mm
Thermoformer C-2104 and Trim Press T-100
Forming area: 965.... | Complete thermoforming sheet extrusion lines | 1998 | |
GEISS - U7 Material PE, ABS , Forming Area (Vxh) 1000x800 Max. sheet width: 1100mm
Nº & type of heaters: 27+18 Quartz
Power of each heater: 200/400W
Regulation of heating elements: Yes
Sheet thickness : owner only produced with 3-6,5mm
Photocell sagging control
Pneumatic plug assist
Heating, forming and cut... | Thermoformer | 1995 | |
VILLA - BR/3CS 1513 Material PST; ABS; ABS+PMMA; HDPE; PC; PETG , Forming Area (Vxh) 1500x1300 Minimum thermoforming size (width x length) 500x400 mm
Upper heating power 47 Kw
Lower heating power 29 Kw
Pre Heating Power 29 Kw
Ceramic Heats
Sheet transport system by chain with suction cup loading
Quick mold change system with removable table
Pn... | Thermoformer | 2003 | |
ILLIG - UA 100ed , Forming Area (Vxh) 960x560mm Control was changed in 2015
Pneumatic Drive
Sheet width: 1000mm
Ceramic Heaters
Power of Heater: 26kW
3 Heating Zones
Power Consumption: 30kWh, 40 A
Working hours 1000 ... | Thermoformer | 2014 | |
GN - 1914 Material OPS, PVC, OPS, PET, PP , Forming Area (Vxh) 482x355 Maximum dry cycles/minute: 50... | Thermoformer | 2007 | |
HARDINGE - T-51Number Of Axes 2 , Work Area (Lxwxh) 189,2mm(X) - 638,3mm(Z) - 101mm (Y)
Hardinge® T-Series SP® turning centers are the recognized market leader in Super Precision and hard turning applications. Designed to produce the most challenging parts in the tool industry, T-Series machines are ideal for two axis high-precision ma... | CNC Routers | 2015 | |
THERMOWARE - THW 3500 Material EPS , Forming Area (Vxh) 1200x1300 Thermoforming area 1200x1300
Max moulding positions: 95mm
Material: EPS
dimensions of 80 ml cup: 55,6 mm high; 57 mm diameter
dimensions of 200 ml cup: 92,3 mm high; 79,4 mm diameter
Automatic Horizontal moulding machines for cups, food trays, contai... | Thermoformer | 1993 | |
RAPID - GK2060-KURF RFL60Rotor Diameter 200 mm , Feed Opening 600 mm Standard Rapid granulator whitch is special developed to oprerate inline with a thermoforming machine.
Inside the hopper there is build in a dancer for controlling the skeleton under production.
Complete with electric control and transport ventilator... | Skeletal granulators | 2011 | |
GN - 1407TM Material PP PET, HIPS, PVC, ABS, PS, OPS , Forming Area (Vxh) 320x180 This machine is designed to produce termoforming moulded products with a pre-punch streching of material. Moulding and cutting of finished products is performed in one unit, which ensures accuracy and repeatability of products throughout the entire p... | Thermoformer | 2005 | |
ILLIG - RV53 , Forming Area (Vxh) 500x350 Forming machine
Forming area: min. 300 x 100mm
Part height above/below material level: 100/30mm
Material width: max./min. 540/340mm
Feed accuracy (marked on the skeleton bridges): +/- 0.3mm
Installed power upper heating: 9.8kW
Installed power lower ... | Thermoformer | 1991 | |
GEISS - 2000x1000Number Of Axes 5 , Work Area (Lxwxh) 2,5x1,5x0,5 Travel / Speed / Acceleration per axis : 30.000 mm/min
Air requirements.. 1 line @ 80PSI
Another 5 axis GEISS (year 1995) available for spares or repair (not included)... | CNC Routers | 1997 | |
GÜVEN TEKNIK - GT7030 Material PP, PET,PS , Forming Area (Vxh) 700 x 400 Used thermoformer + packaging machine
Chain moving with Servo Motor
Servo main engine 11 kw ( 31 Nm,3000 rpm )
Servo Plug Assist Motor 7.5 kw ( 25.5 Nm, 3000 rpm ), ( with automatic lubrication)
Unwinder (AC) motor 0.75kw ( 89 Nm, 1435 rpm )
Cutting ... | Thermoformer | 2012 | |
ILLIG - RV53 Material PS, PET, PP , Forming Area (Vxh) 500x350 Forming area min. 300x100 mm
Forming height above/below sheet : 100/30 mm
Sheet width: max./min. 550/340 mm
Max. number of cycles: 18/minute depending on materials
Pneumatic system
Plug assist
Vertical adjustment of the lower part of the forming tabl... | Thermoformer | 1989 | |
PARCO - ME 1513 Material ABS, PS, PMMA , Forming Area (Vxh) 1500x1300mm manual sheet loading
temperature control
automatic air refrigeration
ceramic lamps
PLC control... | Thermoformer | 2005 | |
ILLIG - HSA -50D, FS-35Machine TypeBlister , Material 330x320 Feeding system Roll fed
Thickness: 0,3 microns
Max. sheet width 350 mm
Depth of draw positive/negative 65mm/65mm
Cycles / min: 20
Closing force: 20 kN
Drive: 3,3 kW
Electrical usage: 24,2 kW
Air consumption: 10 bar
Working hours 2000 h
Frequency: 60... | Blister and Skin | 2006 | |
THERMOWARE - THW 3510 - THW 3516 - THW 3508 Pack of 3 EPS cups machines including molds, testing & counting machine & pre-expander VA40 (year 1999)
1/EPS cups machine THW 3510 YEAR 2002
Max number of moulds : 10
Drawing : Illustration 2-2
Weight : 1900kg
Dimensions Lxlxh : 2070x1780x2200
Ste... | Thermoformer | 2002 | |
ILLIG - UA150/EDBE Material ABS, PP, PE, PC, PS, PMMA, EPS , Forming Area (Vxh) 1500x1000 Materials :
ABS, Polypropylene (PP), Polyethylene (PE), Poly carbonate (PC), Polystyrene (PS), Polymethylmethacrylate (PMMA)
Impact 7000, Makrolon
Polyethylene foams
Expanded materials (EPS)
Types of products :
Industrial parts
Sanitary articles (h... | Thermoformer | 1985 | |
GEISS - DU 2500 T3 , Forming Area (Vxh) 2500x1600 140 KW 250 Amps
Upper heater with quartz heating elements
Upper & lower infrared heating
Side and rear protection
Pneumatic punch
4 cooling fans
Supplied with 17 size reductions + under reduction + storage rack and handling tool for reductions
Ser... | Thermoformer | 1988 | |
ILLIG - RDM50K Material PP, PS , Forming Area (Vxh) 500x280
In mold cutting station
Output: 40 Cycles/Min
Mold closing force: 150KN
Feed length: max 300mm
Photo cell: IFM sensor
Pneumatic plug assist
Drive: Sew Eurodrive
Control Panel: Schleicher
Power of each heater: 20x650W, 70x400W
Regulation of heating ... | Thermoformer | 1998 | |
CANNON SHELLEY - Forma PF 3015 Material ABS, PE, PP, ABS-TPU, ABS-PMMA , Forming Area (Vxh) 3000x1500
Thermoformer with feeding unit with lower preheating
Basic machine ( UA ) Equipment :
∙ Top heating
in version halogen radiator (Flash), for protection with protective grille (switchable in pairs from 0 - 99 %)
Radiation pyrometer in ... | Thermoformer | 2008 | |
GEISS - DU 1500 T6 , Forming Area (Vxh) 1500x1000mm Sell since needed space for new machine
Quartz heating elements
The movement of the heater tables for the bottom table it is pneumatic driven, the top heater is electric/servo driven
It does not have sheet feeding but it has the roll feeding unit so ... | Thermoformer | 1993 | |
ILLIG - RDM 63/10 Material PS, PP , Forming Area (Vxh) 650x300 Dimensions of the table surface (L * W) = 900 * 300 mm.
Working stroke of the table = 125 mm.
The maximum width of the film = 750 mm.
Machine overall dimensions (L * W * H) = 3800 * 2650 * 2500 mm.
The installed capacity of the equipment = 35 kW.
Pro... | Thermoformer | 1987 | |
TFT - FCS 720HS Material HIPS, PS , Forming Area (Vxh) 720 x 430 Unwinder motor power : 0.75kW
Tilting power : 1.1kW
Width max center line : 1200mm
Weight roll max : 1000kg
Forming station :
Mold max dimension : 720x430
Depth max : 120mm
Width foil : 150+740
Max thickness HIPS : 1.5mm
Max thickness PS : 3mm
Max... | Thermoformer | 1998 | |
TFT - FCS 720 Material HIPS, PS , Forming Area (Vxh) 720x430 Unwinder:
motor power : 0.75kW
Tilting power : 1.1kW
Width max center line : 1200mm
Weight roll max : 1000kg
Forming station :
Mold max dimension : 720x430
Depth max : 120mm
Width foil : 150+740
Max thickness HIPS : 1.5mm
Max thickness PS : 3mm
M... | Thermoformer | 1996 | |
EREMA MEAF - Vacurema Advanced 120T- MEAFMaterialsPET , Film Width (Max) 920 mm
Input material: PET bottle grinded material with approximately constant viscosity IV, grinder, clean, dry and pre-mixed, max. 0.8%.moisture, free from PVC
Flat film mono-extrusion line EREMA Vacurema Advanced 120T + Calendar line MEAF
Brand: EREMA... | Sheet monoextrusion lines | 2016 | SOLD |
W.M. WRAPPING MACHINERY SA - FC 780 E SPEEDMASTER PLUS Material PS, APET, CPET, PLA, OPS, EPS, and PVC , Forming Area (Vxh) 780x560 The FC SPEEDMASTER plus is an automatic vacuum pressure forming machine with servo plugs and steel rule cutting technology.
Working hours : 40.000
Forming area : 780x560
Min-max material width: 310-810mm
Positive-negative depth: 130mm
Min-max mater... | Thermoformer | 2014 | SOLD |
GEISS - T8 Material PP/ABS/PS/PE/PVC/ABS/PMMA/PC/PEI/PETG , Forming Area (Vxh) 1215x2163 Max sheet dimensions 1215x2163
Min Sheet dimensions 710x1160
halogen lamps
Availability April 2022... | Thermoformer | 2007 | SOLD |
KIEFEL - KMD52 B Material PS, OPS, EPS, PP, PE, PVC, APET, CPET, RPET , Forming Area (Vxh) 520x400 Min forming area : 260 x 250
Max. foil width : 570 mm
Max. depth of draw : 120 mm positive + negative
Air consumption : 800 NL/min., depends on the depth of products
Max. 60 dry cycles/min.
Equipment:
Film unreeling station
Top heater with single... | Thermoformer | 2000 | SOLD |
GABLER - Swing , Forming Area (Vxh) 450x220 Complete thermoforming machine SWING pr-va GABLER Thermoform GmbH & Co.,2014
It is designed for manufacturing plastic cups from PP, PS, PET and other thermoforming polymers using a die (forming and cutting together).
Manufacturer: GABLER Thermoform ... | Thermoformer | 2014 | SOLD |
GEISS - T8 Material PS, ABS, PC, PVC, PMMA , Forming Area (Vxh) 1500x1000 Vacuum forming machine DU 1500 x 1000 x 620 T8
Equipment :
Digital working temperature control unit Plastitherm LL/30Edig
Digital radiation pyrometer :
- fitted to top heater to control heating time
- fitted to bottom heater to control heating time ... | Thermoformer | 2006 | SOLD |
KUHNE - KHS 70EE/KS45/GA4V-1.100Materials PP, PS , Film Width (Max) 1000 mm Kuhne KHS 70EE/KS45/GA4V-1.100 coextruder
Working hours: 15 000
Layers: A/B/A, A/B, B/A, B
Main extruder: KHS 70
Screw diameter: 72
Output: PP 500kg/h; PS 550kg/h
Screw L/D ratio: 1:33
Coextruder: K45
Screw diameter: 48
Output: 70kg/h
Screw L/D rati... | Sheet coextrusion lines | 2013 | SOLD |
ILLIG - UA150 /4G Material ABS, Plexy, PC, PET, PETG, PS, GERTEX , Forming Area (Vxh) 1500x1000 Illig UA 150 4G year 2009 with 850x900 plate feeder, double heater and punch
4917 working hours
Max length of the plates : 1500mm
Pneumatic drive of the protection grid
Upper and lower heating with individual adjustment of the emitters in 6 position... | Thermoformer | 2009 | SOLD |
ILLIG - RV74 , Forming Area (Vxh) 700x500 3 stations : Forming - Cutting - Stacking
Min. forming area: 400x250mm
Material width min/max: 440-750mm
Height above/below film level: 120/40mm
Film reel diameter: 1200mm
Transport accuracy: +-0.2mm
Suction power of the vacuum pump: 200m3/hour
Conn... | Thermoformer | 1999 | SOLD |
KIEFEL - KMD 100 BFS (S) Material PP, PS, PET , Forming Area (Vxh) 1000x1000 The machine is working in line with an extruder, it has no unwinder.
Max. sheet width: 1050 mm
Forming Area Max - 1000 x 1000 mm
Forming Area min - 500 x 500 mm
Max. depth of draw : 80 mm positive; 150 mm negative
Stations: Forming and cutting+stac... | Thermoformer | 2004 | SOLD |
OMV - D140-D80-C501-A-T1000 + RM77 “Revolver” Material PP , Forming Area (Vxh) 770x480 In line thermoforming machine for cups composed by:
Extrusion line
2 extruders: 140 mm LD 33 and 80 mm LD 33 with PP screws
Hydraulic screen changers
Static mixer SSM-X-75 for 4 components
Flat die head for useful material up to 1000 mm wide
Caland... | Complete thermoforming sheet extrusion lines | 2016 | SOLD |
EREMA SML - Vacurema RGA 100 TE VSV - SML GM 1050/25 MaterialsPET , Film Width (Max) 800 mm
Input material: PET bottle grinded material with approximately constant viscosity IV, grinder, clean, dry and pre-mixed, max. 0.8%.moisture, free from PVC
Flat film mono-extrusion line EREMA Vacurema RGA 100 TE-VSV + SML Model GM 1050/25
Brand:... | Sheet monoextrusion lines | 2002 | SOLD |
AMUT - EA 75/35DMaterials HIPS, ABS, TPU, PE, PP , Film Width (Max) 1500 mm Coextrusion line for the production of three layer polymer sheets
The co-extrusion block can give the following structures: A-B-A; A-B; B-A
Extruder Amut EA75/35D, year 2012
L/D 1:35
It provides layer B, with the following capacities: HIPS 350 kg/h, ... | Sheet coextrusion lines | 2012 | SOLD |
GN - 1914 DM Material APET, OPS, PP, BOPS , Forming Area (Vxh) 482mm x 355mm (19“ x 14“) Minimum forming area: 241mm x 190mm (9.5“ x 7.5“) minimum
Sheet Width : 533mm (21“) maximum - 292mm (11.5“) minimum
Thickness range: 0.25mm - 1.50mm (0.010“- 0.060“)
Knife Length :
3330mm (131“) for APET
5000mm (197“) for other thermoform. materi... | Thermoformer | 2009 | SOLD |
OMV - F 25.3-N Material HIPS , Forming Area (Vxh) 540x240mm Min forming area 220x60mm
Max sheet index 275mm
Max cut sheet width 590mm
Max negative forming depth 120mm
Max positive forming depth 15mm
Number of efective cycles - 40
Tooling for cups 95/124; 95/201; 95/250; 95/400
Tooling for cups 75/50; 75/100... | Thermoformer | 1996 | SOLD |
KIEFEL - KMD75 BFSS Material PET , Forming Area (Vxh) 750x540 KMD KIEFEL 75 BFSS fully servo forming and cutting + stacking (forming station can be also in mould cutting)
Kiefel KMD75 BFSS (forming+cutting / cutting /P&P)
P&P (Pick and Place) - 2016 (local supplier )
Min forming area : 380*270mm
Max forming ar... | Thermoformer | 2002 | SOLD |
GEISS - FZ 3500X800Number Of Axes 5 , Work Area (Lxwxh) 3950x1200x760 Number of axes: 5 axes (X,Y,Z,B,C) with Siemens SINAMICS servomotors.
Possibility of operation on 2 workstations.
Machine control: Siemens SINUMERIK 840D sl.
Axis path / Express speed / Acceleration
X : 3950mm / 75000 mm/min / 4000 mn/s2
Y : 1200mm ... | CNC Routers | 2013 | SOLD |
W.M. WRAPPING MACHINERY SA - FC 780 E Material PS PVC,APET , Forming Area (Vxh) 780x570
Max. reel diameter (mm) 1.200
Thermoforming machine
Max. tool size (mm) 780 x 570
Max. tool size with pneumatic clamp frame (mm) 750 x 570
Max. pos/neg depth (mm) 130/130
Max. sheet width (mm) 810
Max. sheet indexing (mm) 570
Max... | Thermoformer | 2007 | SOLD |
REIFENHAUSER - EH 2400-1-150-30MaterialsPET , Film Width (Max) 1200 mm PET three-layer film production line
Year of manufacture 1986 Extensively rebuilt in 2016.
(Completely modernised control system, on fibre optics + new software).
Condition of the drive gears perfect.
Extruders main: 150mm and side: 70mm
Three-shaft... | Sheet coextrusion lines | 1986 | SOLD |
ILLIG - RDKP 54D , Forming Area (Vxh) 495x410mm 3 Stations: Forming - Cutting - Stacking
Working hours::42372 h
In the last two years, servo motors have been replaced on the machine and brakes and wheel bearings have been changed on the punching station.
Frame air cylinder was changed and many sma... | Thermoformer | 2005 | SOLD |
ILLIG - RDKP 54D , Forming Area (Vxh) 495x410mm 3 Stations: Forming - Cutting - Stacking
Working hours:46199 h
In the last two years, servo motors have been replaced on both machines and brakes and wheel bearings have been changed on the punching station.
Frame air cylinder was changed and many sm... | Thermoformer | 2004 | SOLD |
ILLIG - UA 150 NR Material ABS, PS PP, PE , Forming Area (Vxh) 950 x 1450 mm
renovated for 2 years
Automatic sheet loader
Sheet max width 1000 mm
Heating units ceramic
Power consumption: 16,3 kW
... | Thermoformer | 1987 | SOLD |
OMG - OMF/ PVE 112 PN-M Material PET PVC, PS, EPS , Forming Area (Vxh) 800x300mm The machine has been designed for PET film.
Reel holder diameter 76 mm (possible to adapt to 152 mm)
Max.positive and negative depth 150 mm
Max. Sheet width 840 mm
Upper heating, installed power 55 kW
Lower heating, installed power 55 kW
Processin... | Thermoformer | 2010 | SOLD |
ILLIG - RDKP 72G Material PS, PET, ABS ,PVC ,PP ,PE , Forming Area (Vxh) 760x545mm
Earliest pick up : November 2022
Working hours 82825
Renovations in recent years: Chain,mould table motor replacement
Top heating and bottom heating : 34 kw Manufacturer:ELSTEIN Type: HTS/1 400-600watt
Power of each heater: 400-600 watt
Regulation ... | Thermoformer | 2000 | SOLD |
ILLIG - HSP 35 B 3Machine TypeBlister , Material max. 350 x 250 mm
sealing area: max. 350 x 250 mm
4 stations
blister depth: max. 70 - 100 mm
Carton lifter
heating power: 1,75 Kw
motor power: 1,25 Kw
380V connection via CE plug
holders:
14 pieces 422 x 260 mm
4 pieces 433 x 226 mm
4 pieces 340 x 165 mm
including al... | Blister and Skin | 1984 | SOLD |
BATTENFELD-CINCINNATI - 1-60-30 BMaterials PE, PP , Film Width (Max) 650 mm
Test Line
Battenfeld 60 flat film line
Radioactive thickness measurement
Chill roll
Take-off unit
Corona pre-treatment
SML winder
... | Sheet monoextrusion lines | 1998 | SOLD |
DIAMATMaterials PE, ABS,PP , Film Width (Max) 770 mm
Fully functionally tested, but already dismantled complete flat film extrusion line
The line consists of:
- 4-component dosing unit from Motan with suction lances
- melt filter
- melt pump
- Flat die, width 770 mm, net width film 700 mm, gap adjust... | Sheet monoextrusion lines | 2005 | SOLD |