Stretch blow moulding machines. Sipa SFL 43/ XL WM linear blow molding machine for jars Year of manufacture: 2015 With preform hopper and unscrambler 3 cavities and can be used for a wide range of jars Hardly used, very few hours In excellent condition and available immediatel...
2015 | 300042342 | SIPA
More information
Complete PET filling line for still water. Bosch PET Bottling line for water Machine design Line Speed: 16,000 Bottle /Hour (8000bph+8000bph) -2 x Combi machines (Blower, Filler & Sealer) -Machine speed: 8000 BPH each -Preform (For 200ml, 150ml & 100ml): Flat Neck 6.39gm -Sealing Thermosea...
2018 | 300046517 | BOSCH
More information
Shrink wrapper for cans. Krones Variopac shrink-packer with pad, year 2018 Speed: 120 packs/min, up to 3 lanes Infeed: 10 lanes Foil : transparent & printed shrink film Cans : 33cl standard – 33cl sleek possible Minimum rated Line speed by size: 150ml: 120,000 cph 250ml...
2018 | 300042278 | KRONES
More information
Stretch blow moulding machines. Terekas FlexBlow 4 Standard All Electric Stretch Blow Molding Systems, May 2020 Output: 6000 bph per machine Neck: 20/410, 24/410, 28/410, PCO1881 (or larger too) Machine to be sold alone or ideally with a simiilar second Terekas FB4, year 2020 (re...
2020 | 300047412 | TEREKAS
More information
Complete Non-carbonated Hot-Fill Line for drinks. Krones Synchrobloc hot-filling line for juice production, year 2012 Output: 16.000 bph (0.2, 0.33 & 0.5L) / 13.000 bph (1 & 1.25L) / 10.000 bph (1.75 & 2L) Neck: PCO 38mm Products: fruity drinks with pieces of fruit/pulp/refined pulp, milk-flavored...
2012 | 300047125 | KRONES
More information
Rotary compression moulding press. Sacmi Compression Molding Machine year 2011 Includes: - Molding Press CCM64MB - Camera CVS 152B - Mold 64 cav.1881 (28 mm.) A1881 CSD-6 2.50 gr one piece - Mold 64 cav.1881 (28 mm.) 1881 CSD 2.35gr two pieces - Scoring Folder machine SFM12L ...
2011 | 300047671 | SACMI
More information
Stretch blow moulding machines. Complete stretch blowing system KOSME KR 6 construction year 2017 for bottles PCO 1881 Working hours : 14347 h Ancilliaries included; Tools Cooling system Tipper Preform Loader Spare parts no drier no dehumidifier no compressor All technical d...
2017 | 300047712 | KOSME
More information
Moulds for Preforms. HUSKY Cold Half System HyPET 120 year 2016 Neck PCO 1881 Weight 22.7 g, for 350-450 CSD Model: 32 50x130 GEN 3.5 Stroke 63 mm Max Capacity: 134t Shot Counter: Around 117,000 Set of new core change for 22.28g can be purchased to an additional...
2016 | 300043001 | HUSKY
More information
Stretch blow moulding machines. Used stretch blow molding machine Sidel SBO 8/10 Universal Production: 16000 bph Neck: Milk Ovens: 10 Mandrels: 200 Grippers: 4-4 Direction: Anti-clockwise PLC Siemens Machine Guarantee by the seller working hours: 68.000...
2006 | 300046516 | SIDEL
More information
Pallet wrapper. Pallet Wrapper Brand: Technowrapp Model: P60+TP Year: 2018 Machine in running condition and available immediately! ...
2018 | 300047711 | TECHNOWRAPP
More information
Complete Non-carbonated Hot-Fill Line for drinks. KHS Innofill PET DRV hot fill line from 2017 Line includes the following: 1.Blower, KHS - InnoPET BloFill, neck size: 1881, Cavities: 6, Included: moulds, preform feed unit, preform box tipper, chiller 2.AF compressor, model:CE 24 B, pressure:40...
2017 | 300045941 | KHS
More information
Stretch blow moulding machines. Blow Molding Machine CHUM POWER CPSB-LS6 Capacity: 7,500bph/130~150ml, and 6,500bph/900~1000ml bottles Molds can be purchased at an additional price. Manuals Included Machine available immediately!...
2020 | 300047862 | CHUM POWER
More information
Moulds for Preforms. HUSKY Cold Half System HyPET 120 year 2017 Neck 3025 Weight 17g, for 500-600ml water bottle Model: 32 50x130 GEN 3.5 Stroke 60 mm Max Capacity: 88t Rec. Capacity 85t Complete refurbishment done by HUSKY in 2017 Perfect condition and availa...
2012 | 300042893 | HUSKY
More information
Shrink wrapper for cans. Used Shrink Wrapper for cans Ocme Vega HT 100 2/3 Speed: 300 packs per min and approx 100.000 cph Format of the can 330ml Machine is excellent working condition ...
2019 | 300043031 | OCME
More information
Printing machines for food and beverages caps. TAMPOPRINT printing machine 3 colors in 1 lane Type of ink: Solvent-based ink 28mm caps 45.000 caps per hour Machine was never used in production, only commissioned Available immediately...
2019 | 300043654 | TAMPOPRINT
More information
Injection stretch blow moulding machines for PET bottles. Nissei ASB 150 DPW injection stretch blow moulding machine The system included: - Nissei ASB 150 DPW - Mould Dryer, Matsui - Resin Dryer, Matsui - Hopper Included moulds: 1- One complete ASB mould of 20 cavity for jar 52 mm neck, 18 gr weight (with...
2017 | 300043680 | NISSEI ASB
More information
Complete glass filling lines. Complete KHS Glass Filling Line Year 2000 Product: Carbonated Drink with Alcohol. Shelf life: 18 months Includes: - Unpacker: Rubber bag SYSTEM RES & Crane Hitachi 500kg - Washer: KRONES Lavatec KESK Year 2003 - Caustic Soda Equipment: Pump M...
2000 | 300043989 | KHS
More information
Complete filling lines for carbonated drinks. TFTC 32R/42V/8C - rinsing, filling, and capping machine 32 rinsing, heads, 42 filling heads, and 8 heads for capping with a maximum capacity of 200 bottles per minute Sidel SBO 10- 2009 with chiller, drier, compressor and transformer Includes: ...
2019 | 300046752 | SIDEL, RFC
More information
Shrink Wrapper for PET bottles. Packer KRONES Smartpac C 1400 T Year 2017 Automatic packing of drinks bottles in drinks container Working hours 9850 28.000 bottles / h 1 container / hour Bottle output diameter 63,50 Container high 206,30 6 x 4 pack In production unitil Jan...
2017 | 300047490 | KRONES
More information
Injection moulding machine for food and beverages caps. Husky HyCAP400 injection moulding machine for closures Machine is in perfect working condition 400 V 50 Hz Available immediately! ...
2015 | 300047532 | HUSKY
More information
Moulds for Preforms. HUSKY Cold Half System year 2017 Neck 38 mm Weight 76 g Model: 16 63.5 x 160 Gen 3.5 Stroke 114 mm Max Capacity: 104 t Used in a HyPET 120 In perfect condition and available immediately...
2017 | 300047425 | HUSKY
More information
Injection moulding machine for PET preforms. SIPA PPS-96 complete system Includes: - Injection machine for preforms SIPA PPS-96 - Hopper & Dryer PIOVAN 2012 - Dehumidifier PIOVAN 2012 - Transformer - Dry Air Generator & Vacuum Loader Piovan 2012 - Soft Drop MB Conveyors SOFT COMP06 2012 - Chi...
2012 | 300044325 | SIPA
More information
Rotary compression moulding press. Sacmi Compression Molding machine from 2016 Includes: Molding press CCM24SB Volumetric compound mixer MDP2 Compound feeder S50 + S55 Jest stream upper air Scoring & Folding SFM 12B Cooling conveyor Nara Alaska mold A27W A27W scoring and folding t...
2016 | 300047689 | SACMI
More information
Bottle inspector. Syscona Unicept Pro FHK-M4 bottle inspector, year 2003 Capacity: 20 000 bottles/h Full level X-ray check (only underfilling, no overfilling check) Latest overhaul: X-ray, height adjustment and cabling repaired in 2023 There is also a possibility t...
2003 | 300047812 | SYSCONA
More information
Moulds for Closures. Used 72 cavities molds for caps and closures Brand: Corvaglia Year: 2017 Neck: 29/25 Weight: 1,45gr Cycle Time: 3,9 sec Mold available immediately! ...
2017 | 300047934 | CORVAGLIA
More information
Stretch blow moulding machines. Bottle size: 250ml to 2,500ml Max diameter: 110mm Max height: 350mm It's currently set for 30/25 but the interchange parts for 1810 are available and included. It includes: - Preform hopper and elevator - Chiller for cooling machine / mold: Tae Evo...
2003 | 300034161 | KOSME
More information
Capping machine for glass bottles. NORTAN capsule applicator, UNICAP 35 from 2000 Suitable for tinfoil, aluminium and thermocapsules for wine bottles Bottle sizes from 0.2 cl to 1 litre The maximum dimension for processing the bottle cap is 35x 90 mm. output t is variably adjusta...
2000 | 300039446 | NORTAN
More information
Air Compressors (High Pressure). ATLAS COPCO Air Compressor 2008 Type: Oil Free Reciprocating Booster Min/Max Inlet Pressure: 5.5*/ 9.7 bar Maximum Working Pressure: Up to 42 bar Performance NI/s: NI/s 401, Nm3/h 1444 Running Power KW: 90 KW at 415 V, 50 Hz, 3ph Made in Eur...
2008 | 300042089 | ATLAS COPCO
More information
Air Compressors (High Pressure). ATLAS COPCO Air Compressor 2009 Type: Oil Free Reciprocating Booster Min/Max Inlet Pressure: 5.5*/ 9.7 Maximum Working Pressure: Up to 42 bar Performance NI/s: NI/s 627, Nm3/h 2257 Running Power KW: 132 KW at 415 V, 50 Hz, 3ph Made in Europe ...
2009 | 300042090 | ATLAS COPCO
More information
Sleever for PET bottles. Complete sleeving line Sleever International 130 SL 2V 90, year 2001 Output: max 4500 b/h (currently running at 3000 b/h) Includes: - Powersleeve Mono 130 SL 2V 90 laying machine - Sleeve blocker - Powerskinner shrink tunnel - Conveyors - Pot ex...
2001 | 300043819 | SLEEVER INTERNATIONAL
More information
Injection moulding machine for PET preforms. The system includes: - Sacmi IPS 220 injection moulding machine - One complete mould of 72 cavity 1881 PCO 32,5 gr - Resin Dryer, Genesys - Mould Dryer, Piovan - Hopper, Piovan - HTC and LTC Chiller, Industrial Frigo Cyle time for 15 seconds for 32...
2017 | 300043674 | SACMI
More information
Shrink Wrapper for PET bottles. Krones tray skrinkpackerVARIOPAC PRO TFS-4-DS - 2021 For Energy drinks, Tea, Juice Current containers volume: 12oz to 20oz -4x3, 3x2, 2 packs x 2packs Up to 6 lanes Only 1.200 hours! ...
2021 | 300047107 | KRONES
More information
PET labelling machine. Labeller KRONES Contiroll Construction year 2005 2017 purchase by seller and was completely overhauled Number of labeller stations : 1 Type of bottle PET (0.5l/1.4l/1.5l) for plastic labels on roll Wrap around labelling PLC B&R / Siemens Spar...
2005 | 300047476 | KRONES
More information
Complete Non-carbonated Aseptic Filling Line for drinks. GEA PET aseptic filling line Year 2018 Output 48.000 bph at 230ml Hours 12.000 Product milk / juices / teas Neck 38mm Includes: Sipa SFR24 Evo blow molding machine Monobloc GEA filler Arol capper, elevator, sterilizer Labeller SMI packer Carton p...
2018 | 300047512 | GEA
More information
Other Machines for Drinks. DLSB-300/80 Recirculating Chiller Storage Volume: 100L Coolant temperature: -80 ºC - RT Refrigerating capacity: 40015-2678W Coolant: R404A, F23 Rated power: 21KW Max. input current: 40 amps Rated Voltage/ Frequency: 380V/50Hz 3 phase Circul...
2022 | 300047600 | TOUCH SCIENCE CHILLER
More information
Stretch blow moulding machines. Terekas FlexBlow 4 Standard All Electric stretch blow molding system, November 2020 Output: 6000 bph Neck: 20/410, 24/410, 28/410, PCO1881 (or larger too) With neck orientation Machine to be sold alone or ideally with a simiilar second Terekas FB4, ...
2020 | 300047415 | TEREKAS
More information
Conveyor. Krones air conveyor Angle after blow moulding machine and before filler 11.0 degrees Angle after 180 degree curve 15 degrees Aprox. 82 M Air transport is approx. 10 years old. Incl. ceiling suspension For self-dismantling In very good condition...
2014 | 300047750 | KRONES
More information
Conveyor. Bottle take out device for a Nissei ASB 12M The conveyor has only a few thousand of hours Made in Japan Production: 400 bph Driving Method: Vertical Movement, Electrical Slider, Forward Backward Movement:Air Cylinder The machine has been dismantlle...
2021 | 300044015 | NISSEI ASB
More information
Stretch blow moulding machines. Blow Molding Machine CHUM POWER CPSB-LS6 Capacity: 7,500bph/130~150ml, and 6,500bph/900~1000ml bottles Molds can be purchased at an additional price. Manuals Included Machine available immediately!...
2019 | 300047913 | CHUM POWER
More information
Stretch blow moulding machines. Blow Molding Machine CHUM POWER CPSB-LSS8-50 Capacity: 7,500bph/130~150ml, and 6,500bph/900~1000ml bottles Molds can be purchased at an additional price. Manuals Included Machine available immediately!...
2019 | 300047921 | CHUM POWER
More information
Moulds for Closures. Used 72 cavities molds for caps and closures Brand: Corvaglia Year: 2018 Neck: 29/25 Weight: 1,45gr Cycle Time: 3,9 sec Mold available immediately! ...
2018 | 300047937 | CORVAGLIA
More information
Shrink Wrapper for PET bottles. Shrink Wrapper SMI XP650 ALX from 2021 Includes carton unit with glue Various configurations for film wrap - now running 3 x4 Shrink only, Shrink with carton only, Shrink with carton Pad In excellent condition and with very few hours Available ...
2021 | 300047945 | SMI
More information
Moulds for Preforms. M PET Mold Masters Hot Runner for HUSKY HyPET 120 Year 2013 Perfect condition and available immediately! ...
2014 | 300042892 | MOLD MASTERS
More information
Moulds for Preforms. Husky cold half and robot plate Weight 9.5gr Neck: 26-22.12 P3 Cycle time: 6,7 sec Take out plate included 7.066.300 shots...
2014 | 300043450 | HUSKY
More information
Stretch blow moulding machines. BLOW MOLDING MACHINE SIDEL SBO 6/10 Brand: SIDEL Model: SBO 6/10 Series 1 Year: 1995 Mechanical Speed: 7200 BPH Change Part: 3025 & 2925 neck finish personalization kits Installed Power: 220KW Auxiliary Equipment: - Preform loader, hopper and Unsc...
1995 | 300043461 | SIDEL
More information
Syrup Room. Powder Dissolving Unit & Concentrate Discharge Station Möstl - Dissolving tank, 2.000 l complete with agitator 1,1kW, pressure transmitter, CIP sprayball - Hopper for powder; Hopper for oils and aromas - Triblender Rotor-Stator powder dissolver 5,5...
2018 | 300043835 | MÖSTL
More information
Stretch blow moulding machines. Terekas- FB2-3 PET Reheat - 2020 Cavities- 1-3 Output- 3,400 bottles per hour Preferential heating Includes: -Preform dumper – Preform hopper elevator – Preform feed rails – Change parts for 24 mm 410 and 28 mm 410 neck finishes – Airveyor ta...
2020 | 300044160 | TEREKAS
More information
Air Compressors (High Pressure). ATLAS COPCO Air Compressor 2DX2-37-10 from 2015 Type: Oil Free Reciprocating Booster Rated power 27 kW Motor shaft speed 1485 rpm Available immediately! ...
2015 | 300045186 | ATLAS COPCO
More information
Injection moulding machine for PET preforms. Complete HUSKY injection moulding system for preforms from 2010 Model: HyPET300 P100/110 E100, 72 cavities Working hours : 65.000 hours The line includes the following ancilliaries and equipment: - Robot - Resin hopper Plastic System - Resin dry...
2010 | 300045107 | HUSKY
More information
Pasteurizer for liquids. Pasteurizer KHS Innopro KZE 21/T14-98-12 PT100 A Construction year 2018 For soft drinks Includes: 1 Buffer tank 2 Machine frame 3 Hot holder 4 Plate heat exchanger 5 Control cabinet 6 Distributor for setting the hot holding time CIP cleaning Sy...
2018 | 300045899 | KHS
More information
Pallet wrapper. Used pallet wrapper Robopac Genesis Output: 30 pallets per hour Format: epal and dussedorf Pallet from 1200 x 800 height from 600 to 1800 Pallet from 600 x 800 height from 600 to 1800 Pallet from (600 x 800) + (600 x 800) together, height from 600...
2002 | 300046416 | ROBOPAC
More information
Injection moulding machine for PET preforms. Complete system for preforms Netstal PET-LINE 2000-3700R from 2011 Includes: - PET Injection system Netstal PET 2000-3700 R - 60 cavity injection mould Otto Hofstetter AG (30 gr, 34.5 gr and 39 gr) - Dryer Piovan 560 kg/h - Air dehumidifier RPA 12...
2011 | 300046230 | NETSTAL
More information
Complete PET filling line for sparkling water. KHS Innofill ER VF 88 filling line for still and sparkling water, year 1999 Output: 25.000 bph Neck: PCO 1881 Includes: - SBO 18 blower, year 1999 (23.400 bph) - AF CE 68 ASG compressor, year 1999 - Lanfranchi L3 SR 21 unscrambler, year 1999 - Geb...
1999 | 300046331 | KHS
More information
Bottle inspector. KRONES bottle inspector Type 712 M2 Construction year 2001 Completely overhauled in 2020 Working hours 21611 Worked in only 1 shift / day The Inspector can recognize the 1.0l, 0,5l and 0.2l twist-off glass bottles. Built in are 2X wall controls...
2001 | 300046454 | KRONES
More information
Shrink Wrapper for PET bottles. Wrap-Around Case Packer and Film Wrapper Atlanta COMBI, year 2012 Output: 25 packages/trays per minute Product size: 600ml to 1500ml Packaging: Wrap-around or Tray + film Bottles: PET or glass Pattern: 6x4, 4x3 Available immediately!...
2012 | 300046526 | ATLANTA
More information
Rotary compression moulding press. Sacmi Compression Molding Machine year 2015 Includes: - Molding Press CCM24SB - Mold 24 cav. 30/25 1.7gr - Scoring Folder machine SCM 12LB - Camara CVS 052D - Automatic Box Filling machine - Material feeding system and color masterbatch ...
2015 | 300046741 | SACMI
More information
Injection moulding machine for PET preforms. Used Injection Machine for PET Preforms HUSKY 500 P155/150 E155, year 2007 Working hours 103,228 hours The system includes the following: Mould: Complete 144 Cavity 52.0g/28mm PCO 1810 Preform Mould (HR + Cold-Half) Cavity Plate Model: 144-50...
2007 | 300046729 | HUSKY
More information
Labelling machine for glass bottles. Compart labeler ACFR-CE-G1000-T10 Sc02.P03.MF2 E02, year 2011 Output: 4,800 bph With two labelling stations Worked with 75cl Delta and Bordeaux bottles Paper label and cold glue Pre-cut labels placed front and back Orientation: right to left PLC Sc...
2011 | 300046822 | CONPART
More information
Moulds for Preforms. Husky cold halves and conversion set 1- 72 cavity for 29/25, preform weight: 25,9 gr, 50V x 120H, platform HYPET5e 2- 72 cavity for 29/25, preform weight: 12,1 gr, 50V x 120H, platform HPP5e - Core conversion set for 29/25, 10,10 gr, 72 cavity...
2022 | 300047057 | HUSKY
More information
Shrink Wrapper for PET bottles. KHS tray shrink packer Model TSP A-M TPFO - year 2010 Current containers volume: 400ml to 20oz - Loose or multi-pack -Min. package length: 110 mm -Max. package length: 330 or 410mm -Min. package width: 165mm -Max. package width: 790mm -Heightmi...
2010 | 300047106 | KHS
More information
Air Compressors (High Pressure). AF compressor CE 24 ASG 40 from 2011 Capacity 90 kW Delivery Rate: 510 m3/h...
2011 | 300047140 | ATELIER FRANÇOIS
More information
Sleever for PET bottles. Used Sleever machine for PET Bottles Brand: Krones Model: Sleevematic M1/Shrinkmat 4000 Year 2010 Up to 27,000 containers per hour Machine working until January 2025 ...
2010 | 300047246 | KRONES
More information
Air Compressors (High Pressure). Used ABC compressor Construction year 2009 Nominal pressure 42 bar 800 rpm 92 kW 500 m3/h Wroking hours 19.954 Available immediately...
2009 | 300047294 | ABC
More information
Injection moulding machine for PET preforms. Husky injection moulding machine Hpet 230,with 32 cav. mould for 1881 PCO Shooting Pot ----------------RSE80D/80 Extruder --------------------Hyflo RS80 Maximum Cavities ----------32 Maximum Shot Size ------- 1538 cu. cm Machine...
2012 | 300047361 | HUSKY
More information
Stretch blow moulding machines. Blower KHS Blomax 20, year 2002 Capacity: 30.000 b/h - 0,5 L 24.000 b/h - 1 L 21.000 b/h - 1,4 L 24.000 b/h 1,5 L Produced bottles 2.340.000 bottles No ancilliaries available Spare parts available under request All documentation available Ma...
2002 | 300047474 | KHS
More information
Shrink wrapper for cans. Shrink wrapper for glass bottles and cans KRONES Variopac from 2011 Capacity 48 packs per minute Working hours: 17,000 Packaging material: shrink film LDPE/LLDPE Machine will be working until December 2024...
2011 | 300047445 | KRONES
More information
Wines and spirits end packing line. Filling line for still or sparkling wine from 2011 Including: Rinser Isobaric filler for still or sparkling wine 2500 bph Capper Machine can work with 0,75L or 3/8L Válid for cork and Pilfer cap Available at extra price Wirehooding machine Minerva ...
2011 | 300043912 | GALLARDO
More information
Injection moulding machine for PET preforms. Complete system of Husky Hypet 225 injection moulding machine for preforms Included Husky Hot Runner Machine working hours: 53.000 h Cycle time: 17,6 second (Husky recommendation) Auxiliaries: - Resin Hopper, Plastics Sytems H6000 - Resin Dryer, ...
2015 | 300039755 | HUSKY
More information
Complete Non-carbonated Hot-Fill Line for drinks. Complete TCP; SIDEL; Simik Hot Fill line from 2012 Includes: 1. Central Water Supplying System - TCP 2. Ingredient Disolving System - TCP 3. Continuous Sugar Dissolving System - TCP 4. Main Blending System - TCP 5. Tubular Type UHT Pasteurize...
2012 | 300047560 | SIDEL, SIMIK
More information
Other Machines for Drinks. Water softening system GRÜNBECK Type DELTA Year of construction 2014 Double system with 2x 3 bottles Incl. 2x salt tank 210 l each Capacity: 2x 8 m3/h Last maintenance: 21.3.2022 Softening from approx. 15°dH to approx. 3°dH The structure of the...
2014 | 300047535 | GRÜNBECK
More information
Complete Non-carbonated Aseptic Filling Line for drinks. Complete wet aseptic filling line KRONES Contiform Bloc Construction year 2016 For CSD and soft drinks 25.000 bottles hour Bottle sizes : 0.33, 0.5, 0.75, 1, 1.25 and 1.5 L Closure 1810 Flat and sport cap 28 mm 2 labellers 1 for sleeves and 1 for...
2016 | 300047795 | KRONES
More information
Complete Non-carbonated Aseptic Filling Line for drinks. Complete dry aseptic filling line KRONES construction year 2015 Juices, iced tea, mixed drinks with milk, concentrate depending on viscosity, fresh juice from fresh fruit. 18.000 to 25.000 bottles per hour bottle sizes : 0.25, 0,36, 0.5, 0.75, 1 ...
2015 | 300047816 | KRONES
More information
Complete glass filling lines. Norland International Bottling Line (GlassPak66 - 25oz & 16oz) with additional equipment 2019 for aluminum bottles Depal tables (x2) Diaphragm pumps (x2) Dryers (x2) Cap hoppers (x2) Packoff tables (x2) VideoJet Date coder Fluid Solutions 3 head R...
2019 | 300047835 | NORLAND
More information
PET Filler for W&SD. Sidel Bluestar monoblock year 2008 Filling valves 32 and 8 capping stations and 32 rinsing stations Carbonated drinks Filler top speed is 9000 bph Fills: 2ltr, 1.5ml, 591ml, 500ml, 355ml Includes: -Trine Labeller 13000 bph -Starblend mixer 100...
2008 | 300047895 | SIDEL
More information
Stretch blow moulding machines. SIDEL Blow Molding Machine SBO 16/16 Includes: 1. Preform feeding system, tilter & conveyor. 2. Spare Parts Molds not included Machine available immediately!...
1998 | 300047852 | SIDEL
More information
Air Compressors (High Pressure). High pression compressor NEA NEUMAN & ESSER Model: 3TEV63 Year of manufacture: 2000 Air pressure: 41 bar Delivery rate: 1200 m³/h Dryer included Machine in perfect condition! Power 272Kw Air...
2000 | 300038635 | NEA
More information
Stretch blow moulding machines. Kosme KSB 4L linear stretch-blow moulder, year 2005 4 cavities, max output: 6.800 bph Container sizes: from 0.1l to 3l Energy efficient, with a modular oven. Quick semi-automatic mould change. Air recycling: a lower-capacity compressor is sufficient....
2005 | 300035541 | KOSME
More information
Packing machine for cans. Kettner Traypac T 45 from year 2000 Machine Capacity 45 cy/m 24-seater glued tray for shrink packaging Variable feed of packaging Hot bonding by means of an adhesive device Equipment: 3 layers preparation of four-packs 2 layers of preparation of...
2000 | 300040419 | KETTNER
More information
Palletizer for empty bottles. 1,000 bottle/minute Max bottle height 400mm Min bottle diameter 30mm Max bottle diameter 125mm Max palletizer height 2600mm...
2002 | 300040065 | ZECCHETTI
More information
Stretch blow moulding machines. Sidel SBO 4 Compact blowing machine, year 2007 (with high-pressure compressor) Output: 6.400 bph (for 0,5l) / 6.200 bph (for 1,5l) It includes: - Bellis &Morcom compressor, VH9H3N (year 2008), 580 m3/h, 985 rpm, 110 kW - TEFA chiller, Platinium 370...
2007 | 300036501 | SIDEL
More information
Stretch blow moulding machines. Straight Line Blow Molding Machine. 80% New. Machine was built on end of 2018. Fully functional. The rotary blow molding machine is a combination of the latest German technology with our superior design and manufacturing capacity. This machine co...
2018 | 300042177 | STRAIGHT LINE BLOW MOLDER
More information
Glass bottles filler for W&SD. Krones counterpressure filler long pipe Construction year 1980 Products: wine, frizzante and sparkling wine Formats : 0,25lt, 0,375lt, 0,75lt, 1lt, 2lt Formats Capacity : approx. 5,500-6,000 / 0.75lt bottles per hour Wine, Frizzante and sparkling...
1980 | 300042199 | KRONES
More information
Stretch blow moulding machines. Stretch blow molding machine SMF HS 3000 2 cavities total production december 2021 : around 5 milions of bottles Production: 1,0lt > 2.500 bph - 2,5lt > 1700 bph machine installed and in working condition ...
2011 | 300043669 | SMF
More information
Edible oil filling lines. Complete Enoberg oil filling line, year 2009 Output: 1850 bph. Includes: 1. SMF Combi 200 automatic blower, 2 cavity molds, year 2009 With Kaeser booster, dryer, filter and 40 bar air tank (and without preform elevator) 2. Tech Max bottle erec...
2009 | 300043795 | ENOBERG
More information
Air Compressors (High Pressure). Ingersoll Rand High Air Compressor Pet Star4-3300 R.P.M: 514 Disch Pr. 594.7 PSI A Includes: - High Air Dryer HIROSS PHP 630 2009 Low/High Side Max.1.9 Mpag / 2.8 Mpag - Air receiver capacity 1.5 cubic meter/unit. 6 Units....
2009 | 300043859 | INGERSOLLRAND
More information
Complete PET filling line for still water. Products: Still water Bottle type (basic): from 0.5 l to 2.0 l volume PET closing type: HDPE flat screw-cap 30/25 & sports cap Labels: Plastic BOPP RollFed Package format: 3x2 & 4x3, wrapped in heat shrink film Tray: no tray Line capacity - 35.00...
2005 | 300044168 | KRONES
More information
Stretch blow moulding machines. Serac blow molding machine- SBL SL7/8 - 2020 Neck 38 7 cavities Output 10.500 u/h Still installed and can be seen with material. In excellent condition and used for trials only...
2020 | 300044739 | SERAC
More information
Packing machine for glass bottles. KHS Kisters MultiPacker 199/60 DZ shrinkwrapper for PET/glass bottles, year 1997 Nominal output: 50 packs/min (10.000 bph) Pack formats (on 2 lanes): 1x2/1x3/2x2/2x3 Includes: - Infeed belt with guides and KEB for the dosing conveyor - Grouping ...
1997 | 300044731 | KISTERS
More information
Injection stretch blow moulding machines for PET bottles. NISSEI ABS 70DPW Year 2006 Working hours 18.000 approx Auxliaries - Dryer Piovan - Dehumidifier Piovan - Pump - Hopper - Metal Mezanine Machine in working conditions till the 19th of January 2024, now in dry cycle ...
2006 | 300040564 | NISSEI ASB
More information
Glass bottles filler for W&SD. Used Monobloc for glass bottles Brand: Cimec (Made in Itay) MODEL: AM S 8/1 VA monobloc made up of isobaric filler for glass bottles and single-head capper for 28x15mm aluminum screw cap. This machine can be used to fill carbonated and non-carbon...
2016 | 300046365 | CIMEC
More information
PET labelling machine. Used Simonazzi (Alfa) used roll-fed labeller for PET plastic bottles -the labeller speed is 7.500 b/h at the moment , but can run till 12.000 b/h -working hours: 18174 h machine in working condition ...
2002 | 300046471 | SIMONAZZI
More information
Stretch blow moulding machines. Side-TMS 2004e Year 2007 - Machine is working - Technical handbook available Neck: 40mm for detergent and cosmetic bottles ...
2007 | 300046476 | SIDE
More information
Labelling machine for glass bottles. Used Self Adhesive labeller for glass bottles Minimum production 800 Maximum production 2000 Machine mostly new, it never been used One machine with 2 heads label the body/retro and another machine with 1 heads labels the neck as Taxometer Machin...
2022 | 300046491 | CIMEC
More information
Labelling machine for glass bottles. Labeller for glass bottles OMB from 2013 Model ET 2000 2T 2000 bottles/hour 3 labeling stations 2 in-line capsule heads Double tray capsule accumulator of approximately 1000 capsules Three augers for Bordeaux, Burgundy and magnum bottles Sensor to d...
2016 | 300046492 | OMB
More information
Injection moulding machine for PET preforms. HUSKY Injection Molding Machine for Preforms MODEL INDQ90PET RS 80/80 16 cavities Auxiliaries included: - Desiccant Hopper - Desiccant Dryer - Mold Dehumidifier Molds Included: - Hot Runner 16 Cavities - Cold Half PCO 1810 - 17 gram Preforms -...
2002 | 300046380 | HUSKY
More information
Complete PET filling line for still water. Complete PET still water filling line KRONES C320 BLOW MOLDER 2013 LINKER FILLER 60-72-20 from 2011 Inludes: -Airveyor 101 -Case Coder -Inspet -Ink Jet New -Krones Canmatic labeler -Ozone -Pai Palletizer -Posimat -Preform Dumper Preform Orientator...
2013 | 300046707 | KRONES, LINKER
More information
Other Machines for Drinks. Bottle Top Crystallizer for Preforms Capacity: 28,000 pph Includes: ·Hopper ·Orientator ·Crystallizer ·Air chiller ·Thermoregulator Machine available Immediately!...
2013 | 300046689 | BOTTLE TOP
More information
Injection moulding machine for PET preforms. Used Injection Machine for PET Preforms HUSKY 500 PET 155/150 E155, year 2005 Working hours 121.924 The system includes the following: Mould Complete 144 Cavity 45.8g/28mm PCO 1881 Ecobase 1 Preform Mould (HR + Cold-Half) Cold-Half and hot ru...
2005 | 300047016 | HUSKY
More information
Injection moulding machine for PET preforms. Used Injection Machine for PET Preforms HUSKY 500 P155/150 E155, year 2005 Working hours 126000 The system includes the following: Mould Complete 144 Cavity 21.2g/28mm PCO 1881 Ecobase 1 Preform Mould (HR + Cold-Half) Extraction Robot Resin ...
2005 | 300047013 | HUSKY
More information
Wrap Around case packers. Robopac Prasmatic TC400 Combi Compact Year- 2022 Almost new: 1 300 hours 42 cases per minute Current containers volume: 500ml -20oz -Hicone 24x tray + film is its main format. It also has a double infeed: one for loose bottles and one for Hi-...
2022 | 300047079 | ROBOPAC
More information
Shrink Wrapper for PET bottles. Sidel tray shrink packer- year 2018 Model: EvoFilmEVF-5M-F-SDR Only 6.300 hours Stored in a warehouse and available immediately Guarantee available upon request ...
2018 | 300047110 | SIDEL
More information
Injection moulding machine for PET preforms. Husky LX225 P85/100 injection molding machine, year 1996 Includes: - Husky P85/100 E85 Injection Unit - Husky LX225PET Clamping Unit - Husky S/E Extraction Robot B - Sipa mold, with 12-cavity Sipa hot runner & 85g (40/48 neck) Sipa cold half (w...
1996 | 300047055 | HUSKY
More information
Complete PET filling line for still water. Complete Sipa-Melegari still water filling line, year 2000-2015 Capacity: 5,000 bph Includes: - Blower SIPA SFL 4/4, year 2015 (6,500 bph) - SIG Simonazzi 1R 9.24.126.107 rinser, year 2004 (5,000 bph) - Filler Melegari Isojet 35-7-AOR, year 2000 (...
2000 | 300046999 | MELEGARI
More information
Stretch blow moulding machines. SIAPI Blowing machine EA 10.100 Construction year 2005 -500-600 bot/h with max 10l volume -800-900 bot/h with max 5-8l volume For 2-15L bottles, EA 10.100 / 1, 52 A, year 2005: with preform orientator and preform loader Working hours 500 Includ...
2005 | 300047220 | SIAPI
More information
Heating and cooling unit for moulds and dies. Temperature controller Regloplas type 90Smart/9/TP20.1/1 K/RT70 from year 2017 4 Units available ...
2017 | 300047315 | REGOPLAS
More information
Air Compressors (High Pressure). Used Compressor Bellis & Morcom Gardner Denver VH 21 H3N FULL LOAD RUNNING HOURS : 11.889 NO LOAD RUNNING HOURS: 6.190 TOTAL RUNNING HOURS: 18.079 YEAR OF MANIFACTURE :2012 Maximum COMPRESSOR SPEED 750 RPM POWER RATING : 260KW COMPRESSOR WEIGHT ...
2012 | 300047365 | BELLIS & MORCOM
More information
Capping machine for PET bottles. Cappping machine Gassner Dynasort PET Construction year 2011 Flat Cap 28 mm Bericap DS-SUS 28/16 60.000 bottles / h In production, very good condition ...
2011 | 300047477 | GASSNER
More information
Beer processing. GRUBER KEG cleaning system type MiniKEG Construction year 2015 Cold and hot water 2-3 bar, 29-43 psi Heating steam 3-4 bar, 43-58 psi Sterile steam 1,5 - 2 bar, 22-39 psi In very good condition, immediately available ...
2015 | 300047392 | GRUBER KEGMATIC
More information
Rotary compression moulding press. Sacmi CCM24 closure line from 2009 Includes slitting unit In good condition and available immediately! ...
2009 | 300045721 | SACMI
More information
Shrink Wrapper for PET bottles. Gampack Shrinkpacker GAP 50F Construction year 2005 Format 6-Packs PET bottles in shrink film 6x1,0 l - 43 packs / min 6x0,5 l - 43 packs / min 6x1,5 l - 35 packs / min PLC Siemens 6ES7 In production, available in March 2025 ...
2005 | 300047652 | GAMPACK
More information
PET Filler for W&SD. Rinser / Fliller bloc KRONES Sensometric Construction year 1997 For filling soft drinks in PET Size of bottles : 0.5/1.0/1.4/1.5/2.0l Neck type of the bottles PCO 1881 Working hours 99.000 Filler : KRONES Sensometric VKPI, year 1997 Capper: A...
1997 | 300047751 | KRONES
More information
Air Compressors (High Pressure). Ingersoll Rand compressor Year of construction 2015 Model Centac 750 Sill installed and available immediately!...
2015 | 300047818 | INGERSOLLRAND
More information
Injection stretch blow moulding machines for PET bottles. Nissei ASB 150 DP Injection stretch blow moulding machine Dryer With/without mould upon request Working hours: 47.000 h Machine is in perfect working condition!...
2012 | 300047836 | NISSEI ASB
More information
Stretch blow moulding machines. Used stretch blow moulding machine QUINKO. Year 2018 Formats from 500 ml up to 2 litres Output: 5.000 bph (2,0 l format) Neck: 28 mm 2 available moulds included: 900 ml and 1 litre 300 working hours. For sale due to non use Immediate availability...
2018 | 300047727 | QUINKO
More information
Stretch blow moulding machines. SIDEL SBO 10 Universal Max Speed: 18,000 bph Current Container Sizes (ml): from 300 to 2500 ml Container Material: PET Number of Cavities: 10 Neck Type: PCO 28 mm 1873 Max Container Height (Below Neck): 340 mm Power Supply: 400 V – 3 PH – 50/60 Hz...
2006 | 300047813 | SIDEL
More information
Complete PET filling line for still water. Products: still water without gas Bottle type (basic): from 0.5 l to 2.0 l volume PET closing type: PP screw-cap 26/22 Labels: Plastic Roll Fed Package format: 3x2, wrapped in heat shrink film Tray: Euro-type Line capacity - 25.000 bottles/h Th...
2006 | 300047912 | KRONES
More information
Pallet wrapper. Used Pallet Wrapper Robopac Genesis Cube Production: 118 pallets per hour Machine dismantled ...
2016 | 300047925 | ROBOPAC
More information
Air Compressors (High Pressure). High pressure AF CE 2B compressor, year 2004 Speed: 650 rpm Capacity: 230 cfm It includes: dryer, airtank and chiller....
2004 | 300034165 | ATELIER FRANÇOIS
More information
Stretch blow moulding machines. Blow molder Sacmi SBF 408 - 2012 8 cavities production 21,600 b/h running with 500ml Availble in April Includes: hopper, chiller, feeder and molds for 500ml ...
2012 | 300039706 | SACMI
More information
Stretch blow moulding machines. Nissei ASB HSB-10 Hot Fill Stretch Blow Molding Machine Working Hours 20,817 Type of Neck 28 MM Type of Mould available 350 ML Number of cavity of blowing ...
2008 | 300041450 | NISSEI ASB
More information
Printing machines for food and beverages caps. Printing machine for caps MOSS MO-3062/3 (Italy) Capacity up to 72000 pieces per hour Printing machines for caps of PCO1881 and 1810 standards Possibility of applying three-color printing...
2012 | 300041621 | MOSS
More information
Wines and spirits filling lines. Complete filling line for sparkling wine in glass bottles Caps: Cork and Crown Production: 600-1200 bph Bottles: Borgunder, Bordelese, Champagne Format: from 0,375Lt to 1,00lt The line includes the following machines: Rinser: Steril Water Fille...
2003 | 300043208 | BERTANI
More information
Cans filler and capper. Pack'Co PAC510 drum filler on pallet for 1000L containers, year 2014 Suitable for liquid and pasty products Includes: - Stainless steel frame - Dosing rod that allows to fill under the bung, by the bottom and with accompaniment of the liquid - ...
2014 | 300043861 | PACK-CO
More information
Injection moulding machine for food and beverages caps. Used Netstal SynErgy 3500-3700 E from 2007 Clamping force 3500 kN Screw diameter 80 mm Plate dimensions 1050x1150 Clearance between columns 720x720 Mould hight 600-950 Opening stroke 0-700 Motor power 90 kW Heating power 53,5 kW Dimensions 9,65x2,33...
2007 | 300044202 | NETSTAL
More information
Other Machines for Drinks. Bottle Top Crystallizer for Preforms Capacity: 28,000 pph Includes: ·Hopper ·Orientor ·Crystallizer ·Air chiller ·Thermoregulator Machine available Immediately! ...
2009 | 300044053 | BOTTLE TOP
More information
Stretch blow moulding machines. AMSLER WAE L22 blow molder 2 cavities 1.100-1.200 bph Filling 1 ltrs pet bottles Includes Automatic preform loader but no dumper Available Feb - March 2022...
2001 | 300042208 | AMSLER EQUIPMENT INC
More information
Complete Non-carbonated Aseptic Filling Line for drinks. Complete non-carbonated products Aseptic PET filling line from 2015 Product: vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks Output: 2.500 bph 1,5lt Bottles: 0,5L , 1,5L PET Bottle (...
2015 | 300043619 | SCALIGERA
More information
Shrink Wrapper for PET bottles. Tray with shrink packer, DIMAC, model: Blue Star, from 2008 Capacity: up to 35 packs/ minute Air consumption: 100 NL/MIN Max. pressure: 6 bar Power: 3 x 415V Product patterns: 200 ml - 4X5 300 ml - 4X3 & 4X5 600 ml - 4X3 1500 ml - 2X3 Available...
2008 | 300045639 | DIMAC
More information
Bottle inspector. Empty bottle inspector KRONES Linatronic 735 M2 Year of manufacture: 2007 Output: 39,600 bottles per hour Bottle size 0,25l, Longneck 0,33l, 0,5l, Euro 0,5l, 0,75l Gastro Worked hours 17.000 Glideliner, accutable and partly conveyor belts are a...
2007 | 300045866 | KRONES
More information
Beer filling. Complete brewhouse from 2020 Includes: 1) Nerez Blucina Varna 15/10 - brewhouse 10 HL, 2 vessels, Whirlpool 17/11 HL, Hot water tank 20 HL , pumps and mixer 2) 2 x Nerez Blucina Unitanks 20 / 25 H - working pressure up to 3bars, 2 zones cooling 3...
2020 | 300046001 | NEREZ BLUCINA
More information
Injection stretch blow moulding machines for PET bottles. Aoki SBIII-250LL-50S from 2003 The # cavities depends on the container body dimensions and fluid capacity. The number of cavities range from 10 cavities down to 1 cavity depending on these parameters. Screw diameter- 54mm Injection capacity- 386 cm...
2003 | 300046097 | AOKI
More information
Palletizer for cans. SKA Depalletizer (GRX-FHA 3000)-Palletizer (GRX-FHP) - year 2022 DEPALLETIZER -Full-Height Automatic Depalletizer is a heavy-duty machine with a tubular carbon steel frame construction and aluminum side-walls. -It features a user-friendly HMI touc...
2022 | 300045366 | SKA
More information
Stretch blow moulding machines. Lanfranchi LG2 - Blow molder for pet 1 gallon/38mm neck @ 1900 BPH. 1 liter,,2 liter,3 liters or 5liter can be run on this machine. Working hours are 44k. Included: -preform loading system i -preform dumping -conveying system -robotic bottle ...
2018 | 300046348 | LANFRANCHI
More information
Labelling machine for glass bottles. Used labeller for self-adhesive laber for glass bottles Brand: KOSME Year 2006 Clockwise rotary 4 plates 2 Head with auto-adhesive label 7 bottle formats Manuals Machine stored in the warehouse and available immediately! ...
2006 | 300046418 | KOSME
More information
PET labelling machine. Used PET bottle labeller Brand: Kosme (made in Italy) Model: TOP II HM 16/720 SH1 E1 Year: 2012 Production: 20.000 bph Machine disconnected and available immediately! ...
2012 | 300046419 | KOSME
More information
Stretch blow moulding machines. Used stretch blow molding machine for big bottles Brand: SMI Model: SR 4 HC Year: 2006 Production rate: 29/21 3.900 bph 48 2.900 bph Mold available after a negotiation formats 1lt and 5lt Neck formats: 48mm and 29/21 (at extra price) Working...
2006 | 300046424 | SMI
More information
Injection moulding machine for PET preforms. Husky Hypet 90 RS65/65 for PET preforms from 2010 Includes: Hopper Not currently in production, available immediately and in excellent condition!...
2010 | 300046640 | HUSKY
More information
Complete PET filling line for still water. COMPLETE PET STILL FILLING LINE KRONES FILLER VOLUMATIC and CAPPER - 2008 CONTIFORM S24 BLOW MOULDER -2008 CANAMATIC LABELER CHECKMAT CHECKMAT (LABELER) DOUGLAS CASE PACKER LANFRANCHI Bottle Unscrambler Videojet Bottle Coder Ozone Generator PAI...
2007 | 300046676 | KRONES
More information
Washing machine for glass bottles. Cleaning machine for glass bottles GM Gera Construction year 2010 For 1 L glass bottles (but can be adapted to other sizes) - Operating hours: 32767 (as of 26.03.2024) Bottle dispensing & bottle feeding Label discharge Hot water supply / control ...
2010 | 300046771 | ARCADE GM GERA
More information
Complete glass filling lines. MONOBLOC packaging group, model SILVER 36/5 ESSE-PK Gravity filler with 36 filling valves Capper with 5 heads for “crown” caps. Maximum production: 10,000 bph., of 0.75 liters Direction of rotation: Clockwise Year of manufacture: 2013 Manufacturer:...
2013 | 300043842 | CIME CAREDDU
More information
Printing machines for food and beverages caps. Tampoprint Rotoprint rotary pad printing on bottle caps 38mm dia x 16mm tall Tamper evident speed 1500 caps per minute 3 colors Running clockwise Year 2021 with only 19 hours running time CE Certification ...
2021 | 300046837 | TAMPOPRINT
More information
Stretch blow moulding machines. Sacmi SMI SR 6 blow-moulder for PET bottles, year 2008 Output: 8400 bph (1L) / 7000 bph (1.5L) Neck: 21/29 (vinegar PET bottles) Includes: - Hopper - Spare parts (blow head, slides, bearings...) - Technical documentation For sale since they're re...
2008 | 300046827 | SACMI
More information
Monobloc rinser filler capper. Fimer RT40-8PK vinegar bottle monobloc, year 2004 With Arol capper Output: 9000 bph Neck: 21/29 Cap types: Stiligoutte & Duero Hours worked (April 2024): 40,418 Gravity and volumetric filling Capper Arol Kanna PKV, 8 heads CMMS maintenance, no re...
2004 | 300046829 | FIMER
More information
Printing machines for food and beverages caps. Pad printing equipment Tampoprint machine from 2016 Model Rapid 2000/130 inkwell with scraper Ø (mm) 130 No. of cycle 1700-4500 Cliché dimensions (max. mm) 150x300 Buffer lift (mm) 160 Print dimensions Ø (max. mm) 118-120 Pressure force (N) 2000 Dri...
2016 | 300046895 | TAMPOPRINT
More information
Shrink Wrapper for PET bottles. Polypack tray shrink wrapping machine Year 2023 For Energy drinks, Tea, Juice Current containers volume: 12oz to 28oz -3x5, 3x4, 4x6, 3x8 Max. actual pack length: 440mm Loose bottles or multi-pack 2 to 6 lanes infeed 1.200 hours ...
2023 | 300047080 | POLYPACK
More information
Injection moulding machine for PET preforms. Engel Macpet 320/150 injection molding machine for preforms, year 2007 Includes: - Mold, with 96-cavity MHT hot runner and MHT cold half, for 28g PCO 1881 neck preforms - Tps extraction robot, year 2007 - Piovan DP631HP resin dryer, year 2007 - Pi...
2007 | 300047051 | ENGEL
More information
Handle applicator. Handler applicator TWINPACK from 2013 The machine is capable of applying handles to different types of packages in 2x3 or 3x4 configuration for PET bottles of different capacities : 0.37 l , 0.5, l, 0.7 l , 1.0 l , 1.5 l. The handler consists of ...
2013 | 300047066 | TWINPACK
More information
Complete glass filling lines. Newtec rinser filler capper for glass bottles Capacity 9.000 bph Bottle sizes: 375ml, 750ml, 1l, 1,5l Was used for wine Includes: - Perrier rinser MFL 35 from 2008 35 nozzles - Newtec filler TVR 40 from 2004 with 40 valves - Arol Saturno R 60...
2004 | 300047300 | NEWTEC
More information
Complete PET filling line for still water. Krones PET filling line for water Year: 2015 Very few hours, was never used Neck: 30/25 Includes: Krones blow moluding machine Krones Contiform filler Krones labeller Krones packer Krones palletiser Available immediately...
2015 | 300047313 | KRONES
More information
Cans filler and capper. Complete Monobloc and mixer for filling soft drinks in cans Includes the following machines: Mixer - INNOPRO Paramix CMX 35/T18 – 782 Year 1997 Max Capacity: 35 m3/h Filler - DELTA D 48037 Com. Year 1997 ...
1997 | 300047451 | KHS
More information
Washing machine for glass bottles. Vertical bottle washer Aquatech from 2022 Model: Multifunction washer With programmable cycles and two pumps or tanks to use up to 2 different products per cycle (detergent, sanitizer, liquids to remove stickers, etc...). It has 5 trays included f...
2022 | 300047349 | AQUATECH
More information
Wines and spirits end packing line. Monobloc isobaric bottling system for sparkling wine Fimer from 2018 Includes: Rinsing - Filling - Capping and Muzzling Model: SRT(I)G / 12-16-1/SRF-VA Girevole + muzzling Capacity: 1.500 bph 0,75L sparkling temp. 4 -0ºC 2.500 bp...
2018 | 300047459 | FIMER
More information
Injection stretch blow moulding machines for PET bottles. Nissei ASB PF8-4B V3 Auxiliaries included: Piovan Dehumidifying resin dryer and support structure Machine in production and available immediately Moulds available upon request...
2002 | 300047452 | NISSEI ASB
More information
Injection stretch blow moulding machines for PET bottles. Nissei Heat Resistant Blow Molding Machine Includes: - Hopper - Dumper - 3 Mold Temperature controller MATSUI AML-135 Molds available for 350ml and 500ml (Cylindrical and square) Machine available immediately!...
2004 | 300044322 | NISSEI ASB
More information
Complete PET filling line for sparkling water. Products: mineral water Bottle type (basic): from 0.5 l to 2.0 l volume PET closing type: PP screw-cap format 30/25 Labels: paper (not from roll) Package format: 3x2, wrapped in heat shrink film Tray: Euro-type working hours of the line: tbc L...
1992 | 300047673 | SIDEL
More information
Complete PET filling line for still water. Products: mineral water Bottle type (basic): from 0.5 l to 2.0 l volume PET closing type: PP screw-cap format 30/25 Labels: paper (not from roll) Package format: 3x2, wrapped in heat shrink film Tray: Euro-type working hours of the line: tbc L...
2000 | 300047674 | ALSIM
More information
Pallet wrapper. Wulftec WRTA-175 , year 2019 Max load size:56 " L x 56 " W x 80 " H Allen Bradley Micro800 Series PLC 24V control system Current overload protection NEMA 4/12 control cabinet (can be located up to 10' from machine frame) Autoheight sensing photoeye ...
2016 | 300047783 | WULFTEC
More information
Shrink Wrapper for PET bottles. Packer SMI XP650 ALX from year 2019 + SMI Divider DV200 Includes carton unit with glue Equipped with 6 infeed rows Various configurations for film wrap - now running 3 x4 Can do cans with this packer + divider. In excellent condition and wit...
2019 | 300047793 | SMI
More information
Rotary compression moulding press. Sacmi rotary compression moulding line for PCO closures The line includes: - 2 x CCM001 presses - 1 x TVC003 folding machine - 1 x BTV900 cutter - 1 x PMV200 lining machine - Cooling chillers - Moulds: - 2 x moulds with 32 cavity, PCO 1810, two p...
1999 | 300047806 | SACMI
More information
Other Machines for Drinks. Bottle warmer KHS from 2020 Producer: KHS Type: WICG 21-109 Year of production: 2020 (in usage starting from 05.2021) Capacity: 60 000 bottles/hour Available immediately...
2020 | 300047848 | KHS
More information
Monobloc rinser filler capper. Filler and capper Irundin from 1993 for 8L Monobloc 12/4 12 filling valves and 4 capping Capacity 1.200 bph Still in production, available in March 2025...
1998 | 300047857 | IRUNDIN
More information
Injection stretch blow moulding machines for PET bottles. Nissei ASB- PF6-2B from 2002 Includes: PET resin dryers 2 sets of molds to choose from: 3 Preform injection molds of 6 cavities (1 mold of 28mm neck of 40 grams, 1 mold of 28mm 50 grams and 1 mold of 38mm 70 grams) or 6 double cavity blow molds ...
2002 | 300047881 | NISSEI ASB
More information
Injection stretch blow moulding machines for PET bottles. Injection Blow Moulding Machine NISSEI ASB 50MB V3 from 2007 Offer include Dryer Toshiba and hopper Offer does not include mould Working Hours : 63500 (december 2024) Machine stored in a warehouse and available immediately...
2007 | 300047942 | NISSEI ASB
More information
Moulds for Closures. Husky Hot runner from 2008 Rouxel watercap cold half with the slitting machine Taiwan hwa long without the thermocontroller PMS Mold Master Mold is working condition Neck 30/25 2gr 16 cavities Mold runs at 6,5 sec Dimensions of the mold: 885 x 380 ...
2008 | 300039326 | HUSKY
More information
Labelling machine for glass bottles. Labelling machine for glass bottles COMEN SR/2 from 2003 Capacity 3000 b/h Size of bottles 0,5L For front, back and neck label Hot and cold glue. Machine is in good condition, can be inspected in dry cycle and available immediately! ...
2003 | 300041556 | COMEN
More information
Moulds for Closures. Plastisud Mold (Made in France) Mold: 72 cavities Format: 30/25 low Weight: 1,82 gr Manufacturer: Plastisud Mould dimensions : Width 640 x Length 1 590 x Thickness 700 mm Press : Netstal Synergy 3500 Guaranteed cycle time with cooling to temperat...
2007 | 300041699 | PLASTISUD
More information
Palletizer. Automatic palletization system KUKA Offer includes: 3 x KUKA Robots from 2014 Capacity: 72 000 cph, in packs 6x4 Palletization for cans, was used for beer Machine in perfect working condition always serviced by KUKA with all maintatance reports a...
2014 | 300041903 | KUKA
More information
Complete glass filling lines. Complete filling line for glass bottles KHS ROLA H2 36/5KK Year 1998 (the line was stopped in 2010 and is still installed) Capaciry: 8.000 bph Product: CDS, worked with beer Size of bottles: 0,5L Includes: ·Filling and capping block KHS ROLA H...
1998 | 300041576 | KHS
More information
Labelling machine for glass bottles. Automatic rotary self-adhesive labelling machine for glass bottles Brand: Framax (made in Italy) Model: RLA-H06-S2-L2-D480 with 6 heads and 2 labelling stations for application of 2 self adhesive labels Output: 3000/4000 cph on a ciclindrical bott...
2014 | 300043197 | FRAMAX
More information
Moulds for Preforms. Used Cold half and robot plate for Husky injection molding machine Weight of the preform 30.4gr Neck: 26-22.12 P1 gravity II Lenght of the preform 119,20 mm Take out plate for the robot included the hotrunner is not included Mould stored Number o...
2016 | 300043449 | HUSKY
More information
Moulds for Preforms. Used cold Half for preform Brand: Husky Weight: 12.5 gr Neck: 29/25 for still water Cavities: 96 cav. Pitch = 50 x 140 HPP 4.0 Mould number of shots: 305.185 take out plate ( with 384 pcs of tubes )+ coolpik tubes ( 96 pucks and 288 pcs of tubes):...
2014 | 300044628 | HUSKY
More information
Glass bottles filler for W&SD. Irundin Sincronbloc 20-4 filler for still water in glass bottles, year 2005 Arol Euro VA capper (automatic rotating turret), year 2005 Capacity: 6000 bph Old rinser can be provided with the filler, but it needs some refurbishment to be fully oper...
2005 | 300044706 | IRUNDIN
More information
Wines and spirits end packing line. Bertolaso still wine bottling line, year 1980 Capacity: 3000 bottles / hour Sizes: 25cl, 50cl, 75cl, 100cl Includes: - Accumulation table at the entrance of the line - Cobert / Bertolaso Olympia 16 spouts filler, year 1980 - Bertolaso Super Glori...
1980 | 300045410 | BERTOLASO
More information
Complete filling lines for carbonated drinks. Complete PET filling line for CSD and water from 2004 Formats: 0.5L, 1 and 1,5 L Output: 21500 bph at 0,5 L The line includes the following machines: Preform Feederer Tanner Blower SIG Corpoplast Blomax III Cooler to Blower Riedel Speedline 150 M...
2004 | 300045330 | SIG BLOMAX, SIMONAZZI
More information
Wrap Around case packers. Used Wrap Around Case Packer for secondary packaging Brand: Ocme Model: VEGA HT 40F Year: 2013 Formats: 33cl bottles the secondary packaging is 4 x (6x33cl) with a bottom carton pad dimensioned 393mm x 261mm 50cl bottles the secondary packaging is...
2013 | 300045709 | OCME
More information
Shrink Wrapper for PET bottles. Used Shrink Wrapper for bottle packaging Brand: Ocme Model: VEGA HT 40/2 Year: 2013 Formats: 33cl bottle, 4pack & 6pack 50cl bottle, 4pack & 6pack Secondary packaging is made with an Ocme Vega HT 40F Machine installed but not running ...
2013 | 300045710 | OCME
More information
Injection moulding machine for PET preforms. Used injection molding machine for preforms Brand: Sacmi Made by Oima in Italy Model: Stratos SL 3300 180 Year: 2009 Dryer: Plastic Systems D808 HT Hopper: Plastic Systems H2000 Mold Dehumidifier Plastic Systems DL 2400 Mezzanine Molds available...
2009 | 300045728 | SACMI
More information
Injection stretch blow moulding machines for PET bottles. Machine in excellent conditions but requires investment of 15.000€ by NISSEI It has been maintened by Nissei a few months ago Hours in production: 24.096 Included Palletizer Hergoplas in production...
2010 | 300043788 | NISSEI ASB
More information
Moulds for Closures. OMMP injection mould for fruit-oil closure 29/21, year 2012 16-cavity mould Neck: 29/21 edible oil Approx. weight: 1.7g Material: LDPE 8.1 million shots Includes: - Hot runner system Yudo. - Heating thermostat with connection cables (Multitherm 4...
2012 | 300045927 | OMMP
More information
Stretch blow moulding machines. Side-TMS 2001-M Year 2010 Cavities: 2 Technical Handbook available Neck 28/400 and Neck 28/410 Volume: from 2lt to 8lt machine is not running but it works properly...
2003 | 300046068 | SIDE
More information
Glass bottles filler for W&SD. FILLING AND CAPPING MACHINE FOR GLASS BOTTLES 330ML BIENKOWSKI FROM 2018 Capacity 2000 bph 1.FILLER MACHINE NBP-12 2.ZAP-1 1-HEAD CAPPER 3.CAP FEEDER It was used for juices. Available immediately!...
2018 | 300046094 | BIENKOWSKI
More information
Injection stretch blow moulding machines for PET bottles. Aoki SBIII-250-50 - 2001 The # cavities depends on the container body dimensions and fluid capacity. The number of cavities range from 10 cavities down to 1 cavity depending on these parameters. This information is available via Aoki technical spe...
2001 | 300046107 | AOKI
More information
Stretch blow moulding machines. Used blow molding machine Sidel SBO 10/10 Series 1 Year: 1994 machine in working conditions till december 2023 ...
1994 | 300046244 | SIDEL
More information
Injection moulding machine for PET preforms. Complete system for preforms Netstal PET-LINE 2000-3700 from 2011 Includes: - PET Injection system Netstal PET 2000-3700 R - 60 cavity injection mould Otto Hofstetter AG (26.5 gr and 28 gr) - Dryer Piovan 560 kg/h - Air dehumidifier RPA 1200, 1200...
2011 | 300046199 | NETSTAL
More information
Stretch blow moulding machines. Used blow moulding system SIDEL SBO 14 Series S2 Construction year 2000 Current capacity: 19,600 bph in 600 ml CC 14,000 bph in 3.0 L CC Number of moulds: 14 Moulds included : No Moulds quick change? Yes Formats produced: 600 ml to 3 ...
2000 | 300046329 | SIDEL
More information
Labelling machine for glass bottles. Used Sacmi labeller Model: RMF/RA 1320 15T Type: S2 E2+S3 E3 ADH+CE+CM Year: 2006 Heads: 15 Electronic camara and optical centering . Speed: 12.000 bph 3 Self Adhesive stations 2 Cold Glue, precut label Glass bottle only Formats: 375 ml to 1500 ...
2006 | 300046417 | SACMI
More information
Air Compressors (High Pressure). Used compressor for PET bottles the system is composed of: - Screw compressor ZR 250 VSD FF - 10 Bar - 252 KW - Piston Booster compressor ZD 2300 VSD - 40 bar - 145 KW working hours: around 35.000 machine not in use ...
2008 | 300046609 | ATLAS COPCO
More information
Other Machines for Drinks. Robotic manipulator with a rotatory system of grippers It was used to unload products from metal and plastic crates from carts to deliver individual portions to the washing machine Consists of four segments: carriage positioning unit (carriage load...
2018 | 300046785 | MITSUBISHI
More information
Heating and cooling unit for moulds and dies. Accuchiller Water-Cooled Portable Chiller Model - NQW08 Nominal Cooling Capacity - 8 ton at 50°F LWT Voltage - 460/3/60Hz Tank/Pump Options - Tank & Pump Included Pump Size - 1.5 HP Pump Rotary Non-Fused Disconnect Switch - Rotary Non-Fused Disconne...
2019 | 300046576 | THERMAL CARE
More information
Mixer. Used mixer for soft drinks - Brand: KHS - Model: Paramix - production: 20.000 l/h - Volume: 8g CO2/l - Presion: 5 bar - Temperature: 20 degrees Machine installed but not in running condition ...
1999 | 300046053 | KHS
More information
Labelling machine for glass bottles. Used labeller for Glass bottles Brand: Cimec Linear Labelling 1LS 1 head Production: 1.000 bph Cold glue Precutted label Possible to inspect in dry cycle ...
2020 | 300046907 | CIMEC
More information
Injection moulding machine for PET preforms. Used injection molding machine for PET Preforms Brand: Nissei ASB Model: PM-170/280 Year: Mar 2003 Number of cavity: 32 Maximum preform weight: 69 gr Neck format: 28mm PCO and BPF preform weight: 42,5gr - 43gr - 39gr - 39,5 Auxiliaries available: ...
2003 | 300046903 | NISSEI ASB
More information
Shrink Wrapper for PET bottles. ACMI FENIX 265V Year 2017 Shrinkwrapper, pad & tray Shrinkwrappingmachine to handle only film on double lane, pad with film and tray with or without film on single lane Max. dimension of pack on single lane: 660 x 300 x h360mm Max. dimension of ...
2017 | 300047102 | ACMI
More information
Injection moulding machine for PET preforms. Engel Macpet 320/150 injection molding machine for preforms, year 2008 Clamping force : 3200 kN Screw diameter : 150 mm L/D : 26 Tiebar Diametre : 115 mm Opening stroke : 600 mm Hours...
2008 | 300046923 | ENGEL
More information
Other Machines for Drinks. Ammonia chiller plant from GEA V1100 from 2011 Capacity 450 (KW), 130 (Tons) Ammonia Compressor 2 units, Evoperator, Falling flim unit, Ice water tanks, primary pumps 2 units, secondry pumps 2 units, control panel, Ammonia leak detector system and...
2011 | 300047141 | GEA
More information
Injection stretch blow moulding machines for PET bottles. Nissei single step blow molding machine from 2004 Model: PF 6-2B V3 Comes with 2 complete sets of molds: 500ml - 24g and 1000ml - 31g Machine currently in production and available immediately ...
2004 | 300047314 | NISSEI ASB
More information
Shrink Wrapper for PET bottles. Shrkink wrapper for PET bottles SMI from 2014 Format bottle : 33cl - 1lt Format of package: 6X4 (0.33L) – 4X3 (1.0L.) Production: 40 U/min (0.33/0.45ml bottles) 20 U/min(1.0L. bottles) Manuals : Available...
2014 | 300047353 | SMI
More information
Stretch blow moulding machines. Stretch blow moulding machine Yanced from 2015 Model: YS600 Capacity: 750 bph 1 cavity up to 6L Working hours 5500 Installed power 33 Kw The machine was producing: - 2 L round with neck Bericap 38mm, - 5 L round with mouth Bericap 48mm, - 5 L roun...
2015 | 300047491 | YANCED
More information
Stretch blow moulding machines. Stretch blow moulding machine Yanced from 2015 Model: YS600 Capacity: 750 bph 1 cavity up to 6L Working hours 500 Installed power 33 Kw The machine was producing: - 5 L round with mouth Bericap 48mm The machine can produce many other formats. Inc...
2015 | 300047492 | YANCED
More information
Shrink Wrapper for PET bottles. Shrink Wrap Equipment: ARPAC Model: BPMP-5342 from year 2006 Printed film registration for accurate and repeatable placement of printed graphics Heavy-duty frame construction with welded joints for high durability Gentle product handling with servo...
2006 | 300047484 | ARPAC
More information
Other Machines for Drinks. Fanuc robot from 2020 Model M-10iD/12 Axis robot: 6 Reach: 1441 mm Load capacity: 12 kg Especially for narrow work spaces, or when being mounted upside down, highly versatile robot...
2020 | 300047454 | FANUC
More information
Sleever for PET bottles. Sleever Krones from 2006 Model SIMARIC S7-300 Capacity 6.000 bph Bottle format 0,5L Available immediately!...
2006 | 300047580 | KRONES
More information
Stretch blow moulding machines. SIPA SFR EVO 20 stretch blow moulding machine - Capacity: 40.000 bottle/ hour - Working hours: 42.000 h - Cavity Number: 20 - Bottle Size : 29/25 Water (10 grams) machine installed but not running ...
2011 | 300047485 | SIPA
More information
Complete filling lines for carbonated drinks. PET filling line for sparkling drinks STM from 2019 Capacity up to: 9000 bph for 0,5L, 6300 bph for 1,5L Rinser, filler and capper for PET bottles 0,5L, 1L, 1,5L and 2L Includes: 1. Tribloc Arrow Pet 20/40/8 ISO for sparking and still water/dri...
2019 | 300046613 | STM
More information
Complete Can filling lines. Used canning line for beer and soft drinks Production: 15.000 cph Formats: 330ml and 500ml Products: Beer and Soft drinks Working Hours: 22.000h Year: 2014 Format: Standard Includes: - Depalletizer: Nelden M167-14 - Can filler and rinser: Urano ...
2014 | 300047851 | NELDEN
More information
Other Machines for Drinks. Used can heater for soft drinks Brand: TMCI Padovan Working hours: only 4.000 Production: 35.000 cph Formats: Sleek 330ml 500ml - 150ml Slim Machine in working condition ...
2023 | 300047870 | TMCI PADOVAN
More information
Glass bottles filler for W&SD. Used Monobloc for glass bottling Brand: Vir Mauri Model: Cheope 72/12/12 Year: 1998 Capper: Crown cap - Arol PK Production: 24.000 Machine in working condition ...
1998 | 300047871 | VIR MAURI
More information
Rotary compression moulding press. Sacmi Compression Molding Machine year 2000 Includes: - Molding Press CCM001 - No camara - Mold 32 cav. PCO 1810 - Mold 32 cav. 38mm - Mold 32 cav. 30/25 - Scoring Folder machine SFM12LA - Cap hopper - Liner Sacmi PMV 224E - Cooling con...
2000 | 300047869 | SACMI
More information
Stretch blow moulding machines. Sidel SBO 8 Universal PH 2011 This is a preferential heating machine that can run 43 mm or smaller finishes It is missing a preform transfer arm. The chain is in excellent condition It hasn't worked since 2018 but has been kept in a dry warehous...
2011 | 300047900 | SIDEL
More information
Stretch blow moulding machines. Rotary blow molder SMI SR8, year 2005 Neck PCO 28 1881 Bottle volume 0.33 l - 2 l Available immediately! ...
2005 | 300047941 | SMI
More information
Stretch blow moulding machines. Side TMS 2004e stretch blowing machine Bottle size: 250ml - 2.500ml Max diam: 110mm Max height: 350mm It includes: - Preform hopper - Elevator - Chiller for cooling machine / mold...
2003 | 300034164 | SIDE
More information
Unscrambler. Lanfranchi RMX 12 unscrambler from 2000 With empty bottle conveyor belt inlet Separate switch board In front vertical hopper and bottle flat conveyor PLC: Siemens S7 There are following in the set with unscrambler: air conveyer outlet, 3 bottles f...
2000 | 300030572 | LANFRANCHI
More information
Stretch blow moulding machines. Krones Contiform S14 stretch blowing machine Output: 21.000 bph for CSD, 25.200 bph for non-CSD Hours worked: 44.872 It includes: - MDK preform auto loader, from 2006 - Air conveyor (50m) from 2006 Machine Available Immediately...
2006 | 300037132 | KRONES
More information
Palletizer for cans. Sentry case palletizer unit for cans from 2013 Rated at 80cases/m Model 700 Several patterns programmed patterns Dismantlled and available immediately! ...
2013 | 300039503 | SENTRY
More information
Injection moulding machine for food and beverages caps. Complete plant for spirits (vodka, brandy, wiskey) closures from year 2012 The plant inlcudes: - Assembly unit GEFIT for closures, 10.000 caps/hour - Printing units: DELSA, MADAG, MOSS - IMM Negri Bossi CANBIO 330 - 2 units and CANBIO 220 – 1 u...
2012 | 300040906 | GEFIT
More information
Bottle inspector. Bottle Inspector PONNDORF from 1999 Can inspect residual liquid, HF lye, ground control, bottle neck control For bottles : Diameter 50 to 100 mm Height 150 to 360 mm There are some spare parts vailable Format sets for the following bottles: 1,0...
1999 | 300040863 | PONNDORF
More information
Labelling machine for glass bottles. Labelling machine for glass bottles KRONIMPLANTI from 1992 Type of bottles: 0,75L (champagne, vine) Capacity 3000 b/h For front, back and neck label Machine is in good condition, can be inspected in dry cycle and available immediately! ...
1992 | 300041561 | KRONIMPLANTI
More information
Complete glass filling lines. Complete filling line for glass bottles KHS Innofil DMG 144 from 2004 The line includes: - Depaletizer KRONES Pressant Universal 1A capacity 72000 bph - Rinser KRONES 563M capacity 60000 bph - Automatic inspector of empty bottles KRONES M2 ...
2004 | 300041887 | KHS
More information
Shrink wrapper for cans. Used Shrink wrapper for cans Brand: Ocme Model: Vega HT 150 Machine works only with film Format of the can is 330ml Sleek or 250 Slim The machine has 3 lanes so it can wrap from 150 to 450 packs per minute Dismantled and available immediately...
2016 | 300042997 | OCME
More information
Sleever for PET bottles. Used FINPAC SHM 2B sleever from 2006 Speed: 9000 bph Machine hours: 2500 hours Formats: 0.1 - 1.5 L Manuals:Yes Rotation direction: Linear Spare parts included Can be shown in dry cycle ...
2006 | 300042085 | FINPAC
More information
Other Machines for Drinks. Used Erca PET cup form seal machine from 2007 Model EF320L Hours worked approx. 30.000 Includes AF Packer Was filling still water Formats 100, 125, 200, 250 ml Output 18.000 cups/hour at 100 and 125 ml 14.400 cups / hour at 200 and 250 ml 24, 3...
2007 | 300043810 | ERCA
More information
Air Compressors (High Pressure). Ingersoll Rand High Air Compressor Pet Star4-3300 R.P.M: 514 Disch Pr. 594.7 PSI A Includes: - High Air Dryer HIROSS PHP 630 2005 Low/High Side Max.1.9 Mpag / 2.8 Mpag - Air receiver capacity 1.5 cubic meter/unit. 6 Units. ...
2005 | 300043858 | INGERSOLLRAND
More information
Complete filling line for fountain water (19 L). CapSnap- 5 gallon 1 head filler WASHER: •Programable Logic Controller Human-upgraded by SnapCap 8 years ago •Manual load (Automatic available for 550+ BPH) •Separate recirculated wash, recirculated rinse, sanitizer and final rinse cycles •3 HP was...
1997 | 300044441 | CAPSNAP
More information
Injection moulding machine for PET preforms. SIPA PPS-96 complete system Includes: - Injection machine for preforms - Dryer - Dehumidifier Eisbar - Transformer Around 45.000 working hours Moulds available for: 72 cavities, neck 38 2 start, 38mm SP400, 1881 Disconnected and dismantled. Can...
2009 | 300044452 | SIPA
More information
Complete PET filling line for sparkling water. Used complete filling line for mineral water Products: mineral water and carbonated drinks Bottle type (basic): from 0.5 l to 2.0 l volume PET closing type: 28mm PCO PP screw-cap Labels: paper pre-cut (not from roll) Package format: 3x2, wrapped...
2019 | 300044631 | CORFILL
More information
Other Machines for Drinks. Used Pallet labeller Brand: Logopak (made in Germany) Model: 815 PF Year: 2011 Working hours: 50.000 It was regularly maintained by an authorized supplier Machine was dismantled in 2022 and is available immediately! ...
2011 | 300044924 | LOGOPACK
More information
Injection moulding machine for PET preforms. Injection moulding machine MIR 280-2-520, year 2003 Two extruder type For preforms type OIL, 29 NECK, 28-30 grams Included: Robot GEFIT Eurochiller EF C180 PET, three input water, inner circulation Dryer PET Plastic Systems DR 106 HT/H 1500 PET H...
2003 | 300044766 | MIR
More information
Moulds for Closures. Used complete mould for caps and closures Brand: home made by the seller in Europe Weight: 2,5 gr Neck: 38 mm for Milk and Juices (old Tetratop packaging) Cavities: 12 cav. number of shots: 938,328 the mould can be be tested Available immediatel...
2007 | 300045226 | HOME MADE
More information
Complete filling lines for carbonated drinks. PET bottle filling line from 2004 for CSD Also suitable for still soft drinks, alcoholic drinks Includes the following: - PET blow molding machine Kosme KSB 4L, year 2004 Output: 6.800 bph - 0,5L 6.000 bph - 2L 5200 bp...
2004 | 300045243 | KOSME
More information
Washing-rinsing machine. Sentry Racetrack Rinser-2013 Gripper style rinser Water or air rinser 60 bph All stainless steel construction It ran both single serve bottles and gallon jugs Still set up but cannot be seen running Operator Friendly Lateral Adjustment fo...
2013 | 300045351 | SENTRY
More information
Other Machines for Drinks. Water treatment by particle filtration Prominent from 2011 Model EL-110602-E1 Useful volume: 8000 L Tank dimensions: 2000 x 2700 mm Max. transfer temperature 30ºC Max. fill rate 2550 mm Max filling speed 10,0 m3/h Transfer pressure: atmospheric Den...
2011 | 300045688 | PROMINENT
More information
Glass bottles filler for W&SD. Used monobloc for glass bottles Brand: Krones Model: Mecafill 40-50-10 Formats: 250ml and 275ml (it can fill PET bottles of 2.5lt) Cap: Metal screw caps electrical, 380-400v, 50/60hz PLC: Siemens Machine in working condition ...
2003 | 300045678 | KRONES
More information
Injection moulding machine for PET preforms. Complete system of NIssei ASB PM 70/65 NII injection moulding machine for preforms Includes the following: 1. PM 75 / 65 NII - ASB Machine 2. Dehumidifier Air Dryer With 1 ton Capacity Hopper ( Conair ) W - 400 3. Mould Sweat Protector ( Conair )...
2014 | 300045910 | NISSEI ASB
More information
Stretch blow moulding machines. Side TMS 2004e reheat stretch blow molder, year 2014 Output: 5.600 bph Short neck PCO 1881 Includes: - Mould PCO 1881 - Dryer - Dehumidifier - Chiller - Hopper - Dumper - Preform loader - Spare parts - Technical documents It is currently dismant...
2014 | 300045922 | SIDE
More information
Complete glass filling lines. Krones Modufil Bottling line from 2012 Unused and not Installed Ready to load 200 BPM 12oz and 22oz change parts. Includes: -MODULJET RInser -MODULFILL HRS FIller -Allen Bradly control panel -Crowner -Checkmat Inspection machine -UNIVERSE...
2012 | 300045993 | KRONES
More information
Wrap Around case packers. Used wrap around case packer - Pick and Place Packer Cermex E478 - Case Erector Carmex F387.40 Speed 40 c/min - Automatic Cse Gluer Cermex C6 Machine dismantled and available immediately! ...
2008 | 300046079 | CERMEX
More information
Complete Non-carbonated Filling Line for drinks. FILLING LINE FOR PET BOTTLES 500ML FOR JUICE STM 2014 Capacity 4000 bph Includes: 1.TRIBLOK ARROW PET 9/9/3 NC9 SCRUBBER (9 GRIPPERS) , NEPFILLER (9 POURERS), CAPPER (3 HEADS) – STM 2018 2.1000L BUFFER TANK – STM 2018 3.CIRCULATING TANK 80L– STM...
2014 | 300046093 | STM
More information
Wrap Around case packers. Wrap-around cartoning machine Atlanta Giotto, year 2015 Output: 25 packages/minute In-line feeding: 4 channels Packaging: Wrap-around or Tray Bottles: PET or glass Magazine capacity: 300 It has never been used Available immediately! ...
2015 | 300046353 | ATLANTA
More information
Rotary compression moulding press. ROTOPRINT RTI 2000 Automatic 3 colour tampoprinter Capacity 750 units/min Available immediately! ...
2001 | 300046288 | TAMPOPRINT
More information
Complete glass filling lines. Krones filling line for returnable glass bottles Product: beer Includes the following: Krones VK2V 40/10 NK 94 LM Returnable Glass Bottles filler with speed of 55.000 bottles 0,5l/hour Sterile filter CSM 12-300 Heuft Spectrum LX crate inspecto...
1993 | 300046543 | KRONES
More information
Beer filling. Complete Brewery - Beer Bottling line Brand: Eurostar (made in Italy) Model: MEC ISO DPS 12/1C Year 2015 production: 2000 bph - Malt preparation: Mill 250 kg/h Pallet with Three tanks made of stainless steel copper coated Mash tun/b...
2015 | 300046633 | EURO STAR
More information
PET labelling machine. Used labeller for self-adhesive labels Brand: PE Labellers Model: Modular SL 576-6-SM-4P Year: 2020 Working Hours: 362 Self adhesive labels - one label head Machine used for a short period of time because the project was cancelled machine dismantl...
2020 | 300046710 | PE LABELLERS
More information
Moulds for Closures. Husky mold for closures PCO 1881 from 2007 Cap weight 2,3 g for highly carbonated drinks, water etc. 48 cavities Mold after service and replacement of several molding elements Available immediately...
2007 | 300046736 | HUSKY
More information
Compression moulding moulds. SACMI mold set 28 mm CSD 12 Year 2014 HDPE neck 28 mm carbonated soft drinks Mold very rarely used and assessment done by SACMI Immediately available...
2014 | 300046772 | SACMI
More information
Cans filler and capper. Used can filler KHS (SEN) 32 / 6 FERRUM TYP 308G Capacity: Up to 15.000 cans/h Year of production: Filler and Seamer from 1988, Overhauled in 2024 Lids feeder: ROTOFEEDER, Germany Product filled: Beer, CSD Design: Left/right Valve: Mechanical...
1988 | 300046845 | KHS
More information
Injection moulding machine for food and beverages caps. Used injection molding machine for caps and closures Brand: Krauss Maffei Model: KM 280-1400 Year: 2007 no auxliaries included machine stopped and available immediately ...
2007 | 300046868 | KRAUSS MAFFEI
More information
Injection moulding machine for PET preforms. Used injection molding machine for PET Preforms Brand: Nissei ASB Model: PM-85/110 Year: May 1998 Number of cavity: 16 Maximum preform weight: 65 gr Neck format: 28mm PCO preform weight: 52gr - 46,5gr - 48gr Auxiliaries: Dryer: Matsui APD 200 De...
1998 | 300046904 | NISSEI ASB
More information
Injection moulding machine for PET preforms. Used injection molding machine for PET Preforms Brand: Nissei ASB Model: PM 85/110 Number of cavity: 16 Neck:28mm PCO and BPF preforms weight: 20,5gr - 23,0 gr - 23,5gr - 25,5 gr Auxiliaries available: Dryer: Matsui AMD 250 Dehumidifier: Matsui A...
2002 | 300046905 | NISSEI ASB
More information
Mono-station compression moulding press. SACMI press for crown cap Model: PTC27 Year: 1983 Maximum sheet size: 888x891 Number of pieces per stroke 27 number of strokes per sheet 23 number of pieces obtainable per sheet 621 consumption of sheet per piece 1272.63 mm2 Available immediately...
1983 | 300046928 | SACMI
More information
PET labelling machine. KRONES glass bottle inspector from 2013 For checking the neck damage from the top Bottle sizes: 0,25L 0,3L 0,33L 0,75L 1,0L Max output at the smallest size of the bottle: 40.000 bph Available immediately...
2013 | 300046966 | KRONES
More information
Stretch blow moulding machines. Used Stretch blow molding machine for oval bottles Brand: Side Model: TMS 2004e Year: 2007 Production: 4000 bph preferential heating oven. machine stopped ...
2007 | 300047007 | SIDE
More information
Glass bottles filler for W&SD. KRONES monoblock (Rinser/Filler/Capper), year 1997 Including: Rinser for glass bottles Vacuum filler 4000 l/h. Hot filling at 85 gr.C Accessories for glass bottles: 0.2; 0.7; 1 l Caper Al cap MCA 28 KRONES Binetta (Labelling machine) - one label (...
1997 | 300047045 | KRONES
More information
Stretch blow moulding machines. Used Stretch blow molding machine Sipa Brand: Sipa Model SFR 8E Year: 2006 Neck: 38mm Juice Production: 12.000 bph machine in working condition ...
2006 | 300047196 | SIPA
More information
Sleever for PET bottles. Seaming Machine for sleevers FRESCHI ITALIA Model TBR/2 START 550-300, from 2018 Speed- 300 m per minute This High Speed shrink sleeves seaming machine is use to seaming film material into tube type Used for bottle labellers/sleevers In very goo...
2018 | 300047048 | FRESCHI ITALIA
More information
Complete PET filling line for sparkling water. Products: mineral water Bottle type (basic): from 0.5 l to 2.0 l volume PET closing type: PP screw-cap format 28mm Labels: paper (not from roll) Package format: 3x2, wrapped in heat shrink film Tray: Euro-type working hours of the line: tbc Lin...
2000 | 300047203 | PROCOMAC
More information
Other Machines for Drinks. ICE water treatment Plant from 2011 Capacity: 6 m3/hr Includes: Raw water pump; GRP tank; AC; UV ,5micron filter, PHE, RO unit, Mineral prepration & Dosing system, 1micron filter, Treated Water Tank, Pipeing , CIP unit ...
2011 | 300047232 | ICE
More information
Shrink Wrapper for PET bottles. Robopac pallet wrapping machine, ROTOPLAT 2000 A construction year 2005 - Aprox. Circa 7/10 pallet/hour depending on the bottle format - Adapt for all formats that can be pallettised on a EUR pallet With pre-strech mechanism All documentation av...
2005 | 300047238 | ROBOPAC
More information
Complete Non-carbonated Aseptic Filling Line for drinks. Aseptic filling line for PET from 2011 Capacity 40.000 lph Working hours approx. 55.000h For bottles up to 1.5L-1,75L-2.0L Was working with 200ml, 310ml, 500ml Neck PCO 38mm Includes: Aseptic Process: TETRA PAK (Tetra Alsafe 30, Tetra therm asep...
2011 | 300047289 | SIDEL
More information
Complete filling line for fountain water (19 L). Used Bardi line for 5 galons watercoolers filling Outout: 300bph Working hours: used only time to time NOT included labeller, depalletizer and palletizer Decapper Bardi Washer Bardi Victoria LS27 2R Year 2002 Monobloc Bardi RL2 TPI - 2 heads T...
2002 | 300047373 | BARDI
More information
Sleever for PET bottles. Used Finpac SHM HS Shrink Sleeving Line from 2015 Container size: 330 ml, 445 ml, 550 ml. Bottle material = PET Sleeve dimensions: From 0 to 860 mm Operating speed: up to 900 bottle / min or 54000 per hour Available Immediately!...
2015 | 300047380 | FINPAC
More information
Stretch blow moulding machines. Kosme KSB 2D, year 2009 1l-3l containers Has very few hours Includes infeed system Bought second hand a few years ago but never installed In excellent condition...
2009 | 300047223 | KOSME
More information
Other Machines for Drinks. Fanuc robot from 2020 Model M-20iA/35M Axis robot: 6 Payload: 35 kg Reach: 1813 mm Ideal for multiple medium payload applications. Handles large grippers and medium payloads at high speed...
2020 | 300047456 | FANUC
More information
Injection moulding machine for PET preforms. Engie Refrigeration Quantum chiller, model W135-P3F-LL, year 2016 Refrigerant: R134a – content: 425 kg Cooling power: 1300kW Working pressure: 25 bar Includes: - CRMH51.179.450.2 air condenser, flow rate: 60.9 – 292.1 m3/h - VRMH6.137.450.2 evap...
2016 | 300047449 | ENGIE
More information
Other Machines for Drinks. Capsule unscrewing machine RINK Type KM 740/2/K Construction year 1996 Aluminium + plastic screw caps were unscrewed 20x 0.5l Euro 12x 1.0l AFG Norm Refurbished new unscrewing sets in 2020! In very good condition, immediately available...
| 300047654 | RINK
More information
Stretch blow moulding machines. Blowing machine SIDE from 2008 Model: TMS 2003e-G For 8 and 5 L bottles Capacity 3.000 units per hour. Available immediately!...
2008 | 300047686 | SIDE
More information
Injection moulding machine for PET preforms. Husky Injection Molding for PET Preform Machine from 2005 HUSKY HyPET 120 P85/95 E85 It includes the following auxiliaries: · Mold dehumidifier - Plastic Systems · Hopper & loader - Plastic Systems · Dryer: Plastic Systems It also includes t...
2005 | 300047872 | HUSKY
More information
Stretch blow moulding machines. Sidel SBO 8 Universal PH 2011 This is a preferential heating machine that can run 43 mm or smaller finishes Machine DOES NOT include:Preform dumper, preform incline conveyor, unscrambler, gravity rail, the elevated platform around the unscrambler, ...
2011 | 300047909 | SIDEL
More information
Injection stretch blow moulding machines for PET bottles. Injectin stretch PET blow molder Automa NSB 20 Year: 2000 Working hours 40.000 approx Cavities 4 Preform 43g with neck 28mm Volume 1lt Pitch 110mm Hopper Moretto DP 304 HC Dehumifier Moretto Mold Chiller: Frigel RC 6...
2000 | 300037880 | AUTOMA
More information
Stretch blow moulding machines. Terekas Flex Blow 4- 2016 6,000 B/H 28m neck PCO 1810 4 cavaties Blowing 2 liter container at the moment 2 sets of molds for 1l and 2l Includes: Hopper, feeder For an extra cost- complete line with conveyoring and bottle palletizer Can't be seen i...
2016 | 300038310 | TEREKAS
More information
Complete Non-carbonated Aseptic Filling Line for drinks. Complete non-carbonated PET filling line from 2001 Product: Ice Tea without pulp viscosity 13 and acidity 4ph - shelf life 12 months Output: 12.000 bph 1,5lt - 22.000 bph 0,5lt - 8.000 bph 2,0lt Bottles: 0,5L , 1,5L and 2L PET Bottle Closures: 2...
2001 | 300039511 | PROCOMAC
More information
Moulds for Closures. Corvaglia cold half for closures Manufactured 06/2002 Material = lPE Product = Closures 30/25H Product Mass = 2,10g Cycle Time = 4,8 sec Cavities = 48 Working on Husky H225 Available immediately ...
2002 | 300035299 | CORVAGLIA
More information
Moulds for Closures. Complete Corvaglia mold Neck 30/25 Weight 1,8g Cavities: 72 Cold Half and Hot runner Mold was working in a Husky H300 Mold has 25 milions cycles Stored inside a box with anticorrosive oil Available immediately ...
2008 | 300039302 | CORVAGLIA
More information
Complete glass filling lines. Trasflluid complete glass semi automatic filling line for oil, wine or vinegar from 2014 Line includes: Bottle blower (with air) for 2 bottles at same time (this is for bottles cleaning prior filling) 5 position Filling station with manual position...
2014 | 300041212 | TRASFLUID
More information
Palletizer for empty bottles. Automatic palletiser for empty glass bottles Promalyon, year 1998 Output: up to 6000 bottles / hour It works with 4 different models of empty bottles on 4 palletising tables at the exit of our washing line Includes: - palletiser, with a pallet...
1998 | 300042935 | PROMALYON
More information
Washing machine for glass bottles. Reeve-X-V Glass bottle air cleaner It receives bottles spins around blows air into the bottle and has a vacuum attachment to suck out whatever was blown out of the bottle 3000 bottles per hour Available immediately! ...
| 300043230 | REEVES
More information
PET labelling machine. Labeling machine PE FUTURA 6T/540/1S-1E for PET bottles Year 2006 Capacity 10,000 un/h The machine can also apply labels to a square bottle Machine is diismantled and available immediately! ...
2006 | 300043348 | PE
More information
PET labelling machine. Labelling machine PE FUTURA S 8T-540-1S 1E for PET bottles Year 2003 Capacity 10,000 un/h The machine can also apply labels to a square bottle Machine is diismantled and available immediately! ...
2003 | 300043349 | PE
More information
Shrink Wrapper for PET bottles. Sidel Versafilm F9 packer Used for wrapping 24-packs of 410ml and 500ml Only film 35.000h of use Available immediedtly! ...
2015 | 300043538 | SIDEL
More information
Wrap Around case packers. Apsol TL case packer with DFM lane divider, year 2017 Output: 25.000 bph Cartons acceptance rate: Min: 300x200x150 H mm / Max: 600x400x400 H mm It picks up bottles, cans, jars, bricks from an infeed conveyor and packs them into American cartons o...
2017 | 300043748 | APSOL
More information
PET labelling machine. Used Labeller for pre-cut labels Brand: Krones Production: 15 400 bottle per hour, format 0.5 l. Type of Label: pre-cut Operating hours: 28349 Labels are wraparound. Type of bottle: round Dimension of the label: 231x78 Formats 0,5 and 1,0 Suitable...
2010 | 300044051 | KRONES
More information
Stretch blow moulding machines. Complete system for blowing bottles Kosme KSB 4000 Machine is dismantled since some time. Needs some refurbishment....
1996 | 300026176 | KOSME
More information
Moulds for Closures. Used cold Half for caps and closures Brand: Husky Weight: 1.75 gr Neck: 30/25 for still water Cavities: 48 cav. number of shots: 239.816 HotRunner not available ...
2016 | 300044651 | HUSKY
More information
Shrink Wrapper for PET bottles. Automatic two-row SMI LSK 42 F packaging machine from 2002 Output of 42 packs per minute The packer has an electrical heating tunnel with automatically controlled air blow and exhaust It has adjustable flaps for precise directing of hot air to the...
2002 | 300044821 | SMI
More information
Sleever for PET bottles. Used Sleever for plastic cups for food and dairies Brand: Scaligera Packaging Model: ULISSE 4000 Year: 2007 The machine is includes the following parts: - ULISSE 4000 Sleeve machine (sleeve thickness 45-70 micron, high shrinkage rate) - Sleeve ...
2007 | 300044986 | SCALIGERA
More information
Glass bottles filler for W&SD. Filler CFT MASTER RS 40/40/10 from 2010 Universal, can fill glass and PET bottles Was filling still and carbonated water Capacity 18000 bph for 0,33 L and 14000 for 0,7 L Available immediately!...
2010 | 300044603 | CFT
More information
Rotary compression moulding press. Laser Printing machine TAMPOPRINT (2008) Output 100.000 caps/h Laser printing for caps. It was part of SACMI press The printer is in good condition and available immediately! ...
2008 | 300038698 | TAMPOPRINT
More information
Complete PET filling line for sparkling water. Products: mineral water and carbonated drinks Bottle type (basic): from 0.5 l to 2.5 l volume PET closing type: PP screw-cap format 29/25 short + 29/25 Sport Labels: paper (not from roll) Package format: 3x2, wrapped in heat shrink film Tray: E...
2010 | 300045591 | KOSME
More information
Other Machines for Drinks. Cylinder conic tank Apparatebau Nordhausen Manufacturing year: 1998/2000 Tank type: Vertical CCT, outside type Tank volume: 1 000 HL Number of cooling zones: 3 zones...
2000 | 300045831 | APPARATEBAU NORDHAUSEN
More information
Other Machines for Drinks. Scaligera Ulisse 4000 sleeve machine for cans, year 2016 Output: 4000 cans/hour Sleeves for Sleek and Standard cans Machine orientation: left to right Includes Scaligera TVP2SE steam oven, year 2016 Machine in production until beginning September...
2016 | 300045825 | SCALIGERA
More information
Conveyor. Erimec TRC50A conveyor, year 2018 Speed: 15 meters/minute 3 m length motorized with motor : 3 pieces 3 m length motorized without motor : 3 pieces 3 m free length : 3 pieces 1 m free length : 1 piece 2 m motorized length with motor : 1 piece 2 m fre...
2018 | 300045912 | ERIMEC
More information
Washing machine for glass bottles. Bottle rinser GRONEMEYER from 2012 Glass bottles. Capacity: 20.000 b/h Idle since 2019 Dismantled and stored and available immediately! ...
2012 | 300046006 | GRONEMEYER
More information
Bottle inspector. Empty Bottle Inspector HEUFT from 2007 Capacity: 40.000 bph Idle since: 2020 Dismantled and stored ...
2007 | 300046021 | HEUFT
More information
Complete PET filling line for sparkling water. Used Complete filling line for sparkling water with capacity 6000bph, from 2007 Includes: 1. Compressor 40 bar /Ateliers Francois CE46XSG - Hankison compressed air dryer - EVAPCO Europe 4.5x6-6R/41T-50/50 compressor cooler 2. Foaming agent P...
2007 | 300046020 | SGE
More information
Other Machines for Drinks. Reda RE70V centrifuge for wine, year 2002 Capacity: 25 000 L/H Maximum bowl speed : 7000 rpm Self-cleaning Includes: - wine tank at the end of fermentation - feed pump - clarifier - centrifuge (disk centrifuge for liquid/solids separation) - cla...
2002 | 300046100 | REDA
More information
Shrink Wrapper for PET bottles. Kosme Vialiner 1B bottle or pack divider, year 2015 It feeds the infeed lines of a packaging machine 1 to 3 lanes for 100cl bottles (up to 110mm diameter) 1 to 4 lanes for 75cl bottles (up to 90mm diameter) 1 to 5 lanes for 33cl bottles (up to 70m...
2015 | 300046360 | KOSME
More information
Air Compressors (High Pressure). AF CE46B - High Pressure Air compressor 3 stages piston compresor Dismantled and available immediately! ...
2003 | 300046446 | ATELIER FRANÇOIS
More information
Wines and spirits end packing line. Gravity filler for non carbonated wines Production: 7000 bph Can fill only still wines The machine had been well maintained during all the years in operation and is currently in working condition ...
2001 | 300046518 | MBF
More information
Vinegar filling lines. Used Monobloc for filling Vinegar Brand: Fimer Model: SRT/24-36-6 PKV Year: 2014 Production: 10.000 bph Neck: Vingar Snap On Anticlockwise Pitch: between 55 to 110mm Capper: Arol Kamma PKV Product: the machine can fill only Vinegar or sunflower o...
2014 | 300046557 | FIMER
More information
Other Machines for Drinks. Carton sealer Youngsunpack from 2020 Model: MH-FJ-3A Work height: 500-710 mm Capacity: 12-15 cartons/min Box length: 150-600 mm Box width: 115-490 mm Box height: 110-490 mm Tape: PVX or PP; width: max 50 mm; core: 76 mm. It folds and closes the t...
2020 | 300046634 | YOUNGSUNPACK
More information
Other Machines for Drinks. Cross-flow filtration process system with bidirectional circulation flow Manufacturer: Bilek filtry sro Model: FCW 80A Year 2014 Output: 5000-8000 L of wine per hour The machine is fully automatic, the function of sending sms in case of completion ...
2014 | 300046766 | BILEK FILTRY
More information
Bottle inspector. HEUFT Bottle Glass inspector InLine Reflexx Construction year 2014 Used for 1 L white glass milk bottles Suitable for 87 mm diameter bottles Height 259 mm Height of the cylindrical body area min. 20 mm / max. 175 mm Mouth diameter 38 mm 38 mm - ...
2014 | 300046770 | HEUFT
More information
Sleever for PET bottles. Clever sleever for PET bottles Type: rotatory Output: up to 36.000 bph 3 application heads Type of sleeve: Total / partial top and bottom / tamper evident seal Available immediately! ...
2012 | 300045240 | CLEVER MACHINES
More information
Shrink Wrapper for PET bottles. Automatic Packer and Shrinkwrapper BBM Мodel: model LSK30/F YEAR: 2019 (renovated) Description: N. 1 Infeed conveyor N. 1 Automatic shrink wrapper N. 1 Shrinking tunnel Renovated equipment - Automatic overlap shrink wrapper with inline inf...
2019 | 300046815 | BBM
More information
Injection stretch blow moulding machines for PET bottles. Used Nissei injection stretch blow molding machine Model PF8-4B Includes: Colour doser Chiller Hopper Dryer Approximately 90.000 working hours Currently running 120ml pharma bottle In production and available immediately!...
2004 | 300046965 | NISSEI ASB
More information
Stretch blow moulding machines. ADS G 61 blow molding machine for 5-liter bottles Output: 800 bt/h Includes : - preform feeder - unscrambler. - new API and new temp regulators - manuals They're changing the machine because they'd like a new bottle neck. Periodically maintaine...
1998 | 300046959 | ADS
More information
Stretch blow moulding machines. PET blow molding machine Sidel SBO 10 series 2+ Construction Year 2004 Produced CSD bottles with 15,6 gr preforms Neck personalisation finish PCO 1873 Machine equipped with: Sidel hopper & feeder Sidel electrical cabinet AC Sidel control panel ...
2004 | 300047053 | SIDEL
More information
Other Machines for Drinks. Complete steam boiler System ASTEBO Construction year 2016 Steam output [kg/h] 1600 corresponds to a heat output [kW] 1047 Fuel heat output 1103 Economiser output [kW] 58 Max. permissible operating pressure 13 (safety valve pressure) [bar] 13 Work...
2016 | 300047074 | ASTEBO
More information
Injection stretch blow moulding machines for PET bottles. Used injection stretch blow molding machine Nissei ASB PF 3-1BH Version 2 it produce bottles of 5 liters weight of the preforms 135 gr machine connected to the electricity ...
2003 | 300047014 | NISSEI ASB
More information
PET labelling machine. Labeller Zweckform Construction year 1995 Self adhesive labels for 5.0 L and 10.0 L bottles still water Front and back label Labelling speed 2 - 50 m/min Width 160 mm Length 16 - 225 mm Diameter ext. max 400 mm Diamenter int. 76,2 mm Positioning ...
1995 | 300047162 | ZWECKFORM
More information
Labelling machine for glass bottles. Labeler for glass bottles GERNEP Labetta 4/3/10 640 2A Capacity from 2.000 to 15.000 bph Min label length 25mm Max label length 140mm Maximum label height 150mm Minimum height from bottle bottom 15mm Maximum height from bottle bottom 320mm Dismant...
2013 | 300047191 | GERNEP
More information
Packing machine for glass bottles. Packaging machine Baumer from 2013 Model Line Flex 337 Possible configurations: - for bottles 0,5L (diameter 68mm and height 235mm) - 4x5 with tray and foil - for bottles 0,5L (diameter 68mm and height 240mm) - 4x5 with tray and foil - for bottles ...
2013 | 300047189 | BAUMER
More information
Washing machine for glass bottles. Used Washing machine for glass bottles Brand: Bardi Model: Niagara RW 120-72-66-12R Year: 2004 Production: 3000 bph Treatment time: 15.8 min Machine installed and it is possible to be tested ...
2004 | 300047184 | BARDI
More information
Palletizer. Columbia SP4000 high level palletizer - year 2016 The SP4000 can handle a wide variety of package types including cases, display packs, totes, trays, bundles, shrink lm without pad, bales, plastic containers, crates, small cases and more 60 cases ...
2016 | 300047204 | COLUMBIA
More information
Labelling machine for glass bottles. Labelling machine for glass bottles Krones from 1994 Model: Prontomatic 720 For bottles: 500 ml, 650ml, adjustment for other formats possible with producer cooperation Paper labels Capacity 28.000 bph Max 110mm label width Available immediately...
1994 | 300047211 | KRONES
More information
Injection stretch blow moulding machines for PET bottles. NISSEI ASB stretch blow molding machine Model : PB170/170 - 32/8 MII Year – 2009 For PET bottles production inclusive of : -Preform gate cutter PMG-32 -Rubber leveling pad Including moulds, compressor & cooling tower - 3 Moulds - 210 ml , 250 m...
2009 | 300047228 | NISSEI ASB
More information
Other Machines for Drinks. Industrial Alkaline Water Machine Systems For Beverage Bottling Plants: NEW Built This Year 2024 The only zero-waste fully automated high volume capacity natural minerals ionization technology for making alkaline water available today. There is n...
2024 | 300047018 | HYDROLOGY
More information
Injection stretch blow moulding machines for PET bottles. Used Injection blow molding machine Brand: Nissei ASB Model: 50 MB V2 Year: 2004 Dryer: Piovan DSN 515 HE Year 1995 Resin Hopper: Piovan T200IX machine dismantled...
2004 | 300047463 | NISSEI ASB
More information
Injection moulding machine for PET preforms. Complete injection molding system for production of PET preforms HUSKY GL300PET P100/110 E120 Constructon year 2002 Includes: Hopper & loader Piovan Dehumidificator Piovan RPA1200 Humidifier Piovan DS528 Drier Piovan I5000IX Soft drop MB year 2...
2002 | 300047634 | HUSKY
More information
Other Machines for Drinks. Tray labeller Pagomat Construction year 2007 Label size used was: 148x210mm Available 18 rolls of 900 labels in stock Machine in good condition, immediately available ...
2007 | 300047655 | PAGOMAT
More information
Handle applicator. TwinPack handle applicator, Type MGECL Construction year 1998 Formats adjustable Was running 12 x 0.5l and 6 x 1.5l trays A whole pallet of neutral (white) cardboard boxes (19x2.5cm) / carrying handles + 16 rolls of adhesive tape (Handy-Lift 25mm...
1998 | 300047653 | TWINPACK
More information
Monobloc rinser filler capper. Fogg carbonated rinser filler capper Includes: Fogg FC-16/24/37 filler for carbonated products,24v filler, 16 head rinser, 3 head capper -Set up for 28mm bottle finish running an 1810 cap finish Can run 100 bpm It was installed in 2018 and pull...
2017 | 300047839 | FOGG FILLER
More information
Rotary compression moulding press. Complete compression molding system for two pieces closures Product: PCO 28mm Capacity 3,2 cycle per min System including: 32 stations SACMI CCM 001 press from 1998 - Complete set of tools for the production of AF6 closures, weight of the ...
1998 | 300030174 | SACMI
More information
Labelling machine for glass bottles. Kosme labelling machine for glass bottles from 1995 5 different equipments for bottles for 3 labels and tax label Machine dismantled ...
1995 | 300034077 | KOSME
More information
Air Compressors (High Pressure). High pressure compressor Atlas Copco 40P15 Air Pressure : 40 bars Output capacity : 364 m3/hr Year of manufacture: 2001 Working hours : 60 000 hours Includes: - 6000h Original Atlas Copco kit - Two full valve sets No tank Renovation kit valued arou...
2001 | 300036855 | ATLAS COPCO
More information
Complete filling lines for carbonated drinks. PET line for CSD (0,5L/1,0L/2,0L) from 1996 year Actual speed:0.5L –12 000b/h, 1,0L –12 000b/h, 2,0L –10 000b/h Nominal speed:0.5L –18 000b/h, 1,0L –15 000b/h, 2,0L –12 000b/h Blower SIDEL SBO 10/10, 1996, 10500 b/h Blower SIDEL, SBO 10/14, 1996...
1996 | 300037750 | TEKAL
More information
Shrink Wrapper for PET bottles. SMI wrap-around case packer from 2005 Dimensions of boxes: Length: Min - 280mm, Max - 485mm Width: Min - 165 mm, Max - 280 mm Height: Min - 150mm, Max - 420mm Specifications: Electro-pneumatic drive and control system Maximum capacity is 1400 box...
2005 | 300036514 | SMI
More information
Blow moulding moulds. Used molds for Sipa SFR 8 with 38mm neck 1. format 0,33 from 2005 2. format 0,50 from 2013 3. format 1,50 from 2013 4. format 1,50 from 2015 5. format 0,40 from 2017 6. format 1,00 from 2008...
2008 | 300039501 | SIPA
More information
Complete Non-carbonated Aseptic Filling Line for drinks. KHS blow molding machine and aseptic monobloc for filling juices from 2005 Sipa SFR 8E Capacity:11.000 bph Neck 38mm Aseptic filling and capping machine Dry cold aseptic filling and capping machine for PET Bottles KHS Asmofill System ACF 24-60-48...
2005 | 300041280 | KHS
More information
Pasteurizer for liquids. Desaeration unit Cavsys DC-65-15 with KZE Includes: - Saturator - Electrical control cabinet (Siemens S7) Available immediately!...
2011 | 300041813 | CAVSYS
More information
Bottle inspector. Visual bottle inspector SACMI Model: SV10 Year: 2004 Dismantled and stored. Can be shown in dry cycle Available immediately! ...
2004 | 300041865 | SACMI FILLING
More information
PET labelling machine. Labeling machine PE SPLENDID PET bottle size 0,5L Paper label, cold glue The machine is dismantled, but can be inspected Available immediately!...
2002 | 300042061 | PE LABELLERS
More information
PET labelling machine. Sacmi -Opera Modul 400 labeller For glass or PET bottles Includes PSC application stations and cut/stack applicator Rotary 33T stations ·583 bpm for pressure sensitive ·833 bpm for Hot Melt In dry storage, available immediately! ...
2013 | 300042293 | SACMI
More information
Capping machine for glass bottles. Arol- Ropp capper from 2013 20 heads Set for 28mm TZL cap and it ran 250 aluminum bottle, can run glass Pitch 720mm Available immediately! ...
2013 | 300042368 | AROL
More information
PET Filler for W&SD. Used Monobloc for Carbonated water and Soft Drinks Isobaric valve Brand: Sympak made in Italy by BC bottling and canning Model: Master 24/24/6-6 Neck: PCO 1810 Year 2005 Capacity max. 6000 bottles/h at 1,5L machine dismantled and stored in the...
2005 | 300042367 | SBC
More information
Palletizer. PAI case palletizer 6251 was built in 1995. It was taken back into the manufacturer at Montgomery and refurnished (6251R) in 2005 It has a PLC 5/11 and that can be upgraded to a 5/20 if needed (this just adds more memory) Machine can run up to 40...
1995 | 300042728 | PAI
More information
Complete PET filling line for still water. PET water filling line GYM from 2004 Bottle type (basic): 5 liters bottles PET closing type: HDPE 38 standard screw cap Pallet: Euro-type Line capacity - 6000 bottles/h The capacity is calculated on the basis of a 5lt PET bottle The line includ...
2004 | 300043066 | GYM INTERNATIONAL
More information
Complete PET filling line for still water. Complete filling line for still water for 5L PET bottles Line includes the following: - Blower Sidel SBO 1 from 1998. Moulds included for 5L, 38mm neck - Preform feeder - Filler Kosme Graviblock 10/1200, 10 filling valves. Year 2010 - Capper Arol,...
2010 | 300043207 | KOSME
More information
Labelling machine for glass bottles. Labeller for glass beer bottles Krones Robusta 600-10, completely refurbished by the manufacturer in 2016 Three stations labeller Front 75 x 85 Back 65 x 75 Neck 100 x 31 The machine has only 100 working hour after the refurbishment Maximum s...
1995 | 300043442 | KRONES
More information
Wrap Around case packers. Listed as “Douglas Sleever”- 1999 Used Davis cartoner- wrap around cartoner Model: 4-6 ct In excellent condition and very versatille, immediately available! ...
2000 | 300043533 | DAVIS ENGINEERING LLC
More information
PET labelling machine. Krones Canmatic labeller Used for 400ml, 650ml and 1.5L bottles 35.000 hours worked In good condition and available immedietly ...
2005 | 300043537 | KRONES
More information
Glass bottles filler for W&SD. Sympak- Master RS 32/8 -2005 Isobaric valve Was filling 300/m beer but comes with another larger format Includes: sealer,cap loader, capper, crimp cap, rinser, carbonator In excellent conditon and stored in dry conditions...
2005 | 300044118 | SYMPAK
More information
Handle applicator. Twinpack Mete Mec handle applicator from 2004 Twin lane various packs Was running 1.5L 6 pack Capacity 50 packs/minute Dismantled, in good condition and available immediately!...
2004 | 300044650 | TWINPACK
More information
Other Machines for Drinks. Preform inspector with camara Stratec-Bull Model 3000 BMI/P from 2007 Was used with SIG Corpoplast Blomax 10 (with capacity 16.000 bph) Available immediately! ...
2007 | 300044671 | SRATEC
More information
PET Filler for W&SD. Nate Rotus PET filler Year 1998 60 filling heads, 12 cap heads with rinser Capacity of 1,5L bottles: 8000 bph Available immedietaly!...
1998 | 300044801 | NATE
More information
Other Machines for Drinks. Automatic EURO EPAL pallet inspection system from 2007 Ability to decide what items are to be verified, monitoring of damaged pallets The device comes with an electrical diagram In good condition and available immediately! ...
2007 | 300044819 | EURO EPAL
More information
PET labelling machine. Automatic labeling machine KOSME TOP STAR 960 20T S2 E4 from 2003 General overhaul carried out in 2018 Paper labels (main and counter) cold glue Equipped with two stations including label magazines Each station has five label transfer pads The c...
2003 | 300044820 | KOSME
More information
Stretch blow moulding machines. Sidel Synergy PET Strech blow molding machine Including: Blow molding machine 2 cavities 1 Bin 1 unscrambler 1 Electrical Cabinet 1 pair of Mold Available immediatly...
2013 | 300044869 | SIDEL
More information
Labelling machine for glass bottles. Used labeller for glass bottles Brand: KHS Model: Innoket Production: 3.500 - 22.000 b/h Year: 2005 Dimension of the label: 200ml glass bottles > 54,7x148 mm 1000ml glass bottles > 88x277 mm Machine in wor...
2005 | 300044992 | KHS
More information
Shrink Wrapper for PET bottles. SMI Shrink Tunnel with capacity of 20 000 cph.(15 t/min ) Model LSK 15 Line was in working condition until end of November 2017 Machine was working with 0,5L cans Installed power 12 kW Presure 6 bar Dimensions: 3.000 x 1.400 x 1.150 mm Can be insp...
2003 | 300045047 | SMI
More information
Other Machines for Drinks. Alliance- G0276 Can warmer Dimensions 7,6m x 4,2m Heat exchanger, conveyor belts and hardware included Available immediately! ...
| 300045258 | ALLIANCE
More information
Glass bottles filler for W&SD. Filling line SUNSWEL BXGF-14-12 For water in glass bottles Year: 2014 12 filling valves 6 capping heads Bottle 250 ml (6.000 u/h) Bottle 750 ml (2500 u/h) Capper of 6 heads Cap type: ROPP / 28 mm Disconnected Can be inspected inmediately ...
2014 | 300045386 | SUNSWELL
More information
Complete PET filling line for still water. STM Arrow Pet 16/16/6 NC/BIG 6 litre mineral water bottling line, year 2015 Output: 3000 bph Includes: Blueline 3 BIG blower, year 2015 Tribloc washer-filler-capper STM Arrow Pet 16/16/6 NC/BIG, year 2015 UNO ADE labeller, year 2016 ERSEY handl...
2015 | 300045453 | STM
More information
Other Machines for Drinks. Rotary Precoat Vaccum Drum Filter TMCI PADOVAN from 2010 Model TAYLO 15 Vaccum filtration on a diatomaceous earth or perlite precoat Process stages: - precoating - filtration and coating drainage - coating cutting and discharge - filtrate extr...
2010 | 300045506 | TMCI PADOVAN
More information
Other Machines for Drinks. Oil-fired boiler plant The offer includes: - CERTUSS steam generator type Universal 700 TC with oil burner, including ancillary equipment (hot water filter, pre-pump, steam drier) with a capacity of 700 litres of steam/hour with a reduction stat...
2023 | 300045637 | CERTUSS
More information
Complete filling lines for carbonated drinks. Complete Filling Line for Carbonated Soft Drinks Capacity : 300 bph Format and size bottle : Height : 200,8 ml Diameter : 57 ml Includes: 1. Automatic Uncramble 200 bpm (NEMINC) year 2017. 2. Tranfers CIP to Filling, from 2013. 3...
2014 | 300045549 | CHIEH SONG
More information
Palletizer. ROBOT – universal – multipurpose Manufacturer: FANUC LTD – Japan – 2007 Robot R-2000 iB/165F – with control cabinet Worked in water bottling plant palletizing 19 L gallons It can also be repurposed for other transfer and stacking operations. It has...
2007 | 300045720 | FANUC
More information
Shrink Wrapper for PET bottles. Dimac: Star Film HS Film warpper without traywith shrink tunnel 40+ packs per minute Available immediately! ...
2002 | 300045606 | DIMAC
More information
Edible oil filling lines. Used complete filling line for edible oil Bottle type (basic): 1.0 l volume PET closing type: 29/21 snap on Labels: paper pre-cut (not from roll) Package format: 6x2, wrapped in heat shrink film or carton box Tray: Euro-type Line capacity - 6000...
1995 | 300045971 | KOSME
More information
Other Machines for Drinks. Parker NitroSource NQ-20PBLY PSA nitrogen gas generator, year 2016 It provides nitrogen gas of 95% to 99,9995% equivalent nitrogen purity Flow rate: 21.6 m³/h @ 7 barg All technical documents are available ...
2016 | 300046104 | PARKER
More information
Injection moulding machine for PET preforms. SIPA PPS 48/2000 injection molding system for preforms, year 2000 Hours worked: 17.000 Includes: - Sipa 48-cavity PPS48/2000 injection molding machine for preforms, year 2000 - Ceccato Aria CBS 15 G3 compressor, 15/10 bar, year 2013 - Worthing...
2000 | 300046077 | SIPA
More information
PET labelling machine. Pallet Labeler Logopak Logomatic 920 II PFRK Capacity 80 packets per hour It prints and applies self-adhesive labels to pallets Posibility to stick the label on 3 sides of the package (front, side and back) Printing head 920 II V2 The labelling ...
2008 | 300046235 | LOGOPAK
More information
Stretch blow moulding machines. Used Stretch blow moulding machine Brand: SMI Model: SR 10 Year: 2010 Neck: 28mm for still and sparkling water Production: 15.000 bph machine installed but not in working condition since december 2022...
2010 | 300045138 | SMI
More information
Other Machines for Drinks. Europool TF_02 bottle dryer, year 2015 Output: 15.000 bph Linear machine with air blades It has never been used Available immediately ...
2015 | 300046356 | EUROPOOL
More information
Conveyor. Conveyors Krones Synco for cans, glass or PET bottles (50m), year 2015 Never been used Available immediately ...
2015 | 300046357 | KRONES
More information
Shrink Wrapper for PET bottles. Baumer shrink-wrapper for PET bottles Original year of manufacture by Baumer unknown Completely overhauled by SGE SRL in 2005 Available immediately...
| 300046358 | BAUMER
More information
Shrink Wrapper for PET bottles. Automatic shrinkwrapper SMI from 2020 with 90 infeed Model: BP802ARV 350R-S Never used Up to 25 packs/minute Sealing bar: 760 mm Maximum pack height: 380 mm Infeed lanes: 1-2 (optional 3-4) Multi-trust system Sorter unit ar infeed Pack compositio...
2020 | 300046577 | SMI
More information
Edible oil filling lines. Complete filling line for edible oil Prospomasz from 2003-2018 Capacity 3000 bph Includes: 1. Filling and capping machine Mono-30 from 2003 Fill and cap bottles from 200 to 1000 ml. Filling valves 8, capping heads 4 Sizes of the bottle: diameter 50...
2003 | 300046307 | PROSPOMASZ
More information
Stretch blow moulding machines. blower Sipa SF 12/8: - Format of the neck: 30/25 and 29/25 - Format of the bottle: 0,5L, 1,0L and 1,5L. - Working hours: 13.000h machine disconnected it includes a second Sipa machine for spare parts ...
2006 | 300041070 | SIPA
More information
Compression moulding moulds. SACMI mold set 30 mm x 25 mm Year 2013 HDPE neck 30 x 25 mm Hardly used Immediately available...
2013 | 300046776 | SACMI
More information
Beer filling. Can filler Nate + Seamer Angelus from 2015 Format of can is 0,33 and 0,5 l Includes: 1. Can filler Nate model: Peval 40 from 2015 2. Seemer Angelus 4V from 2015 For Standard 33cl/50cl cans Capacity up to 15.000 cph Machine available immediatel...
2015 | 300046871 | NATE
More information
Other Machines for Drinks. Automatic machine for the manufacture wire hoods for sparkling wine from 2016 Brand: Mura 40 mm welded steel frame Capacirty 120 wire hoods/minute Star formation by electromechanical systems, adapted for standard leg Star advancement by mechanical...
2016 | 300046896 | MURA
More information
Complete glass filling lines. Filling line for CSD in glass bottles from 1991 Includes: 1. Monobloc Spomasz (Filler and capper) type 4XP25 - output for 0,33L bottles - 5300-12300 bph (max.output for sparking water with 6g/L285ºK - 11500 bph for 0,33L, and 5000 bph for 1L) - out...
1991 | 300046950 | SPOMASZ
More information
Injection moulding machine for food and beverages caps. BMB MC16PI injection moulding machine for caps, year 2008 Includes: - Mobile and fixed platform - Hydraulic pump - Control system and power supply MOOG Mars IMI 220 It does NOT include any mold (it's currently working with a 48-cavity Plastisud...
2008 | 300047052 | BMB
More information
Sleever for PET bottles. Sleever Finpac Container size: - diam. min.25 mm - max. 124 mm - height: min 60 mm - max. 300 mm Sleeve dimensions: - LF: from 42 to 200 mm - CL: from 30 to 300 mm Operating speed: up to 15.000 b/h...
2005 | 300047046 | FINPAC
More information
Other Machines for Drinks. Warmer BeHo S.r.o. from 2013 Was connected between filling machine and labeler to warm up bottles and dry (drying shears) them before labeling Capacity 1.600 bph Available immediately!!...
2013 | 300047190 | BEHO S.R.O.
More information
Injection moulding machine for PET preforms. Injection Moulding Machine Nissei ASB PM-70 /111N from 2015 24 Cavities for PET preform Includes: 2 Molds for PET perform 30/25 neck for still mineral water (standard Neck without Slot) Estimated weight of Preform : 14to 18 gr, 500 ml bottles and...
2015 | 300047233 | NISSEI ASB
More information
Palletizer for empty bottles. OMS O8 Strapping machine from 2007 The 08 vertical strapping machine was designed to apply vertical straps to palletized products It comes with a strapping head that works either with polypropylene or polyester straps t can be placed in full auto...
2007 | 300047270 | OMS
More information
Complete filling lines for carbonated drinks. Soft Drinks and CSD Krones PET line Format: 2l Capacity : 8 000 – 10 000 b/h Including: 1. Blowing machine Sidel, series 1, year 1998, not funcional 2. Filling machine Krones Superblock 63, year 1998, not funcional 3. Air Conveiors Ling Sistem,...
1998 | 300047374 | KRONES
More information
Stretch blow moulding machines. Used Blow Moulder Sidel SBO 8/8 Series 2 Option for High Resistence blowing for Hot Fill products Neck 28mm PCO 1810 No auxiliaries included Machine available immediately!...
2004 | 300047400 | SIDEL
More information
Monobloc rinser filler capper. SIDEL aseptic Filler, year 2003 Neck: 1881 Only non-carbonated soft drinks Filling valves: 70 Filler capacity 0,33L and 0,5L 24000 b/h Filler capacity 1,0L 18000 b/h Filler capacity 1,5L 16000 b/h PLC: Siemens SPS 7 - 400 Electrical cabin...
2003 | 300047354 | SIDEL
More information
Complete PET filling line for sparkling water. Products: mineral water and carbonated drinks Bottle type (basic): from 0.5 l to 2.0 l volume PET closing type: PP screw-cap Labels: paper (not from roll) Package format: 3x2, wrapped in heat shrink film Tray: Euro-type Line capacity - 7500 bo...
2007 | 300033642 | METALNOVA
More information
Bottle inspector. Glass bottle inspector for empty bottles Krones Linatronic K 713 Formats: 1L - 0,50 L - 0.75 L - 0.25L Type of inspection: Bottom, Neck, Body (internal and external) , HF: Liquid waste on the bottom, IR: Oil waste and control of the body it canno...
2003 | 300037889 | KRONES
More information
Conveyor. 50 meters of Perfect condition AIR conveyor by Sidel / Simonazzi from 2006...
2006 | 300039158 | SIDEL
More information
Bottle inspector. Bottle Inspector FT System from 2008 Model: CL 500 - HF - CT 001 - SE Inspector is checking level and closure In good condition and available immediately! ...
2008 | 300039157 | FT SYSTEM
More information
PET labelling machine. Labelling Machine P.E. Labellers Modular Plus from 2015 2 cold glue labeling stations plus one double station for self stick label 3 labels; main, back and neck Machine is labeling paper label on PET bottel Orientating bottle by v...
2015 | 300039120 | PE
More information
Mixer. Saturator Sidel Starblend with 25 000 lph from 2006 Capacity: 27 m3. Working ours: 15.800 h The machine does NOT have: - brix measurement unit - heat exchanger Stored in warehouse and available immediately!...
2006 | 300039156 | SIDEL
More information
Complete PET filling line for still water. Product: Still water Output: bph max.; 4800 bph for 0,5L format and 3600 bph for format 1,5L and 2L Bottles / Molds: 0,5L , 1,5L and 2L Closures: PCO 28mm Labels: Packing: None Palletizing: None The line Sidel / Parmatec consist of the followin...
2000 | 300033251 | PARMATEC, SIDEL
More information
Stretch blow moulding machines. Blow molding machine Krones Contiform S-12 from 2005 • The oven has 11 lamp stations that in turn each control 9 lamps for distribution depending on the blowing format in which it works. • The opening and closing of the lock is by means of cams, it ...
2005 | 300041064 | KRONES
More information
Stretch blow moulding machines. NISSEI ASB BLOWER NB 40 SC Manufacturing year: 2008 Max Bottles size 4 Cavs 1.5L Type of neck 28 Capacity 3600 BPH Working hours 22,000 Includes technical documentation ...
2008 | 300041526 | NISSEI ASB
More information
Mixer. Saturator brand SARCMI mod. DS 300 year of construction 1989 Technical characteristics: Power supply Volts 380 Hz 50 auxiliary circuits volts 24 Installed power Kw 13.5 H2O pressure at deaerator bar 3 Shaving pressure max bar 6 CO2 supply ...
1989 | 300041703 | SARCMI
More information
Glass bottles filler for W&SD. KOSME monoblock rinser/filler for 300ml to 750ml glass from 2008 4500 bottles per hour @ 750ml 40 valves Includes: AROL capper 6 heads (Quick-connect) (year 2010) Filling sparkling water Missing parts: Documentation (electrical, user manual) Dumm...
2008 | 300041702 | KOSME
More information
PET Filler for W&SD. Used monobloc for sparkling water and soft drinks Bottling machine Manufacturer: Cortellazzi Model: Vega 40 Year: 2000 Nominal capacity: 5000 bottles/hour Num of heads: 40 Neck configuration: PCO 28 Type of valve : Isobar Rotary screw capping mac...
2000 | 300041872 | CORTELLAZZI
More information
Stretch blow moulding machines. BLOWMOULDER SIDE BARCELONA Manufacturer: SIDE, Spain Year of production: 2002 Capacity: 2.000 bph x 6,0 l PET Mould:6 and 8,5 l with 2 cavities Machine with hopper working hours 15.000 The machine is configure to produce 6 and 8.5 lt bottles. nec...
2002 | 300037968 | SIDE
More information
Shrink Wrapper for PET bottles. Polypack- PH-32HL right angle Shrink bundler Formats: 6 packs, 12 packs, 18 packs and 24 packs It can do just shrink wrap and use trays to package. Equipped with a MGS Pad Inserter set up with 10" wide x 17" long pads 15" tall x 25" wide x 64" de...
| 300042756 | POLYPACK
More information
Complete filling line for fountain water (19 L). Complete Envastronic filling line for watercooler fillers from 2006 Bottle type (basic): PET from 10L to 16L volume PET closing type: PP Non screw cap Pallet: Euro-type Line capacity - 480 bottles/h The capacity is calculated on the basis of a 1...
2006 | 300043067 | ENVASTRONIC
More information
Stretch blow moulding machines. Blow moulding machine Siapi EASP 20/200 Capacity: 2.500 bph x 2 l No tools offered Complete machine - switched off 3 years ago Compressor Tempo Tehnika 350, 2004 (made in Serbia) Speed: 1100 rpm, Power: 75 kW, Pressure: 42 bar Air dryer: Boge du...
2004 | 300043262 | SIAPI
More information
Shrink Wrapper for PET bottles. Shrink wrapping machine DIMAC Star F 45, year 2004 Max. speed: 45 packs/minute, 6-bottle packs, 16.200 b/h With 4 lanes, they've produced different packs (3x2, 2x2, 4x2, 4x3..) on 4 different formats It can pack PET, glass, cans and aluminium cans,...
2004 | 300043274 | DIMAC
More information
Stretch blow moulding machines. - Blow molder Sidel SBO 6 Series 2+ - Year 2005 - Machine stopped in 2021 - Production: 9.600 bph with format 1.5lt - Caterpillar Oven ...
2005 | 300043404 | SIDEL
More information
Injection moulding machine for PET preforms. GREENBOX chillers - 2 units Both used for HUSKY GLINE300 Chiller №1. GreenBox Multi 40/HP Cooling capacity - 140.000 Kcal/h Compressor power - 4 x 8.9 kW Rated power - 85.5 kW Tank capacity - 850 liters Dimensions - LxWxH - 4,3x1,65x2.20 meters C...
| 300044205 | GREEN BOX
More information
Edible oil filling lines. Used PET oil filling line from 1995 Output: 8000 bph Volume: 1L Includes: 1) Filling machine Masterfil S1000-A 4HD ON 6HD S/V RWF from 1995 2) Labelling machine ANKER, type: Variant 1 from 1995 3) Empty bottle feeder Mantika from 2009 4) Market ...
1995 | 300045293 | MASTERFIL LIMITED
More information
Other Machines for Drinks. Processing part for brewery ZVU POTEZ a.s. (Czech Republic) Capacity 315 hl, up to 10 brews per day Includes: Hot water tanks Tanks for a solution of hop extract Wort tanks and pumps Tanks of the washing device Vortex turbulent tanks Grain d...
2002 | 300045658 | ZVU POTEZ
More information
Injection stretch blow moulding machines for PET bottles. used Nissei ASB 650 NH it includes hopper and dryer The machine was producing jars The machine has been completely refurbished in 2014 The machine has been disconnected recently...
1985 | 300045723 | NISSEI ASB
More information
Beer processing. MTI stainless steel tubular exchanger 28.5 m2, year 1999 100 stainless steel tubes Ø 30 x length 3000 mm Stainless steel body Ø 565 mm with 2 tappings Ø 60 mm 2 damaged stainless steel caps Overall dimensions: 900 x 800 x 3850 mm Available immedia...
1999 | 300046071 | MTI
More information
PET labelling machine. Cavagnino & Gatti CG84CL2/20/3XPSH labeller, year 2007 Output: 10.000 bph Glass bottle formats: 0.75L & 1L Number of labeller stations: 5 (2 trad + 3 adhesives) Type of label: paper & PP Type of glue: cold & heaters Label location: front, back Ma...
2007 | 300046098 | CAVAGNINO & GATTI
More information
Complete filling line for fountain water (19 L). Capsnap 600 Adapta from 2002 2 head filling valves 600 b/h includes automatic bottle rinser No longer in production but in good condition...
2002 | 300046695 | CAPSNAP
More information
Other Machines for Drinks. FILTROX complete filtration system, construction year 1989 Combination package consisting of a 600*600mm sheet filter and a ZHF The sheet filter: A Schenk Admiral year of construction unknown, 600*600; 106 plates, aluminum, coated Hand hydraulics ...
1998 | 300046943 | FILTROX
More information
Edible oil filling lines. Edible oil filling line for PET bottles and cans up to 5 liters with a capacity of 1.300 bottles/hour Includes: - Filling and capping machine, AUSERE, model HAM-10/NN, volumetric filling system, 1.300 bottles/hour, 6.500 liters/hour - Automatic sea...
1991 | 300036566 | AUSERE
More information
Packing machine for glass bottles. Case packer OCME Output up to 30 packs per minute Bottles: PET, glass Sizes: 0,75L, 1L, 1,5L and 2L With complete formats available (with modifications other types of bottles could be made), it allows the use of large and small bottles. Posibile co...
1985 | 300047171 | OCME
More information
Handle applicator. Handle applicator Twin pack Year 2001 Model MDEL Machine was used 4 years Electrical power 4KWA Consumption 6A-400V Working pressure of the circuit 6 BAR Output 35 cycles/min Was working with a line with capacity 13.000 bph Machine was used for bott...
2001 | 300047278 | TWIN PACK
More information
Complete glass filling lines. Complete KHS NCSD glass filling line, year 1985, completely overhauled in February 2024 Capacity : 18 000 b/h Formats : 250ml, Ring pool cap 28mm 300ml, Twist off cap 32mm ( the capping machine is rented from Silgan). Including: 1. DEPALLETIZER...
1985 | 300047358 | KHS
More information
Injection stretch blow moulding machines for PET bottles. Complete system for blowing PET bottles KOSME KSB 3000 with moulds and compressor Capacity: 3,000 b/h from 0.2 liters to 2.0 liters The electronics have been completely updated and improved to modern standards of blowing equipment. The set of eq...
1998 | 300047648 | KOSME
More information
Stretch blow moulding machines. SIPA 16 Cavity PET Reheat Stretch Blow Molder, model SFR 16, year 2004 Output: 400 bpm (at 91% efficiency) Format: 500 ml PET water bottles Preforms: 8.5 gram preforms with 26/22 mm neck finish Includes: - chilling unit - preform dumper - feeder &...
2004 | 300038051 | SIPA
More information
Monobloc rinser filler capper. PET Triblock Simonazzi Eurostar from 2006 Machine Type: Eurostar 50/70/10K Capacity : 19 000 bph for 1500ml Product: Carbonated water Neck: 1810 PCO Cotrol Panel : Siemens S 7 (CPU); B&R (HMI) Working Hours: 15774 Spare Format ...
2006 | 300039106 | SIMONAZZI
More information
Pasteurizer for liquids. CENTEK FPS100 flow-through pasteurizer for beer from 2004 Capacity: 100 g l / hour Pipeline diameter: DN 50 Pasteurization temperature: 65-80 degrees Pasteurization unit: 20-30PU Maximum CO2 content: 6g/l Dismantled and available immediately! ...
2004 | 300041180 | CENTEC
More information
Stretch blow moulding machines. Blowing machine SIPA SFR8 from 2005 Capacity 16000 b/h Bottle size 0,25L...3L Molds 0,5L and 1L are included Chiller is included Neck type PCO 1810, 28mm The machine is dismantled and avilable immediately....
2005 | 300042255 | SIPA
More information
Monobloc rinser filler capper. Monobloc SBC Master RS 32/32/8 from 2007 for PET Capacity 6000 bph for bottles 1,5L and 9000 bph for bottles 0,5L PCO 1810 and 1881 The machine works with CDS drinks (sparkling water, energy drinks, soda) and still water. Rinser heads 32, fille...
2007 | 300042470 | SBC
More information
Shrink Wrapper for PET bottles. Two layers SMI SK 802 T from 1999 Can be inspected in dry cycle and availabe immediately! ...
1999 | 300039399 | SMI
More information
Air Compressors (High Pressure). Ingersoll Rand IR AIR COMPRESSOR PET STAR 210-3 - year 2000 Includes: 1)HP-300 Ingersoll Rand DRYER: -Compressed Air Dryer, Desiccant, ISO Class 2, 300 CFM, Dew Point (Deg. F) -40, For Air Comp. HP 75hp, 115 Voltage, 4.0 A Full Load Amps, 60 Hz, 1 P...
2000 | 300044493 | INGERSOLLRAND
More information
Compression moulding moulds. Kits for CCM48 mould 50 pieces cavity Cap specification: S4 A28 1810, 2.85grm. +-0.15 All parts original Sacmi ...
2006 | 300045446 | SACMI
More information
Washing machine for glass bottles. Bardi NVA washing machine for glass bottles, year 1995 Output: from 950 to 2800 bph Includes: 8-row Bardi washer and gas boiler with injection pump Compressor Water softener Blowing machine adapted for small formats (33cl) and juice bottles Manu...
1995 | 300045737 | BARDI
More information
Mixer. Co2 generation plant Supplier : UNION CONSTRUCTION (Denmark) Model : CBU 0285 Year of Manufacture : 1995 Capacity : 285 Kg/Hr - Effeciency 70% Currently installed and ready for dismantling The current space with the boiler and liquefaction ...
1995 | 300041185 | UNION
More information
Edible oil filling lines. Complete edible oil filling line with a capacity of 10.000 liters/hour, for 1 liter PET bottles Includes the following: - Bottle unscrambler, model P-17/15, 8.000 b/h; 8.000 l/h, year 1991 - Filliing and capping machine for PET bottles, mnodel HAM-...
1995 | 300036570 | AUSERE
More information
Injection moulding machine for PET preforms. Husky XL300 PET injection molding machine for PET preforms, year 1990 Includes: - Husky extraction robot - MPET injection molding mold, with 48-cavity MPET hot runner and 2 MPET cold halves: · 13,8g (29/25 neck) with conversion kit to 15...
1990 | 300047058 | HUSKY
More information
Stretch blow moulding machines. Stretch blowing machine SB 8010 model LB 4* 3 YoM 2006 Capacity 7000 b/h PCO 1881 The machine is dismantled, can be inspected in dry cycle and available immediately. Video is also available....
2006 | 300041678 | LONZA
More information
Stretch blow moulding machines. Used Siapi blower EAS 50.115/7 Two neck formats: PCO 1810 and 29/21 Oil Maximum diameter of the bottle: 106mm Maximum height of the bottle: 350 Air flow: 650 Nm3/h machine dismantled and stored in a container. machine has been dismantled in Janua...
2004 | 300042525 | SIAPI
More information
PET labelling machine. Labeller BRB Mega 12-200 from 2005 - Speed of the machine: 10.000 bph - Format and dimensions of the label: 0,5L 215X45 mm, 1,0L 258X60 mm, 1,5L 285X62 mm - Working hours: 13.000h - Labels are paper or plastic and hot ...
2005 | 300040197 | BRB
More information
Injection stretch blow moulding machines for PET bottles. Injection stretch blow moulding machine Nissei ASB PF 24-8 from 2016 Capacity 2300 bph 2L Includes: 1) Dryrier New Omap from 2017 Type: Dehumidifier MDSHT + Hopper for raw material 1000 2) Mould for PET bottle 2L Technical documentation for a...
2016 | 300046144 | NISSEI ASB
More information
Injection moulding machine for PET preforms. Used injection molding machine for PET Preforms Brand: Husky Model: HyPET 300 4.0 P100/110 EE120 Year: 2017 Working hours (May 2024): 37.804 Auxiliaries included: Hot Runner 72 cavities Dryer Plastic Systems DR824.1HT Hopper loader Plast...
2017 | 300047049 | HUSKY
More information
Injection stretch blow moulding machines for PET bottles. Nissei ASB 150 DPW injection stretch blow moulding machine The system included: - Nissei ASB 150 DPW - One complete Japan ASB mould of 20 cavity for jar 52 mm neck, 18 gr weight plus 3 extra blow moulds for different design - One jar cap mould of 28 ...
2018 | 300043679 | NISSEI ASB
More information
Palletizer for empty bottles. AND & OR model BM06-A1000 - 2016 Automatic bagging machine, self-made bag from rolls of thermo-shrinkable film Compact model This equipment is recommended for low cadences and steady bottles. It is usually installed after the blower and the leak ...
2016 | 300046428 | AND & OR
More information
Injection moulding machine for PET preforms. HUSKY HyPET_400_P120/130_E140_ISS Year 2007 Resin Dryer PIOVAN DP631HT Year 2007 Dehumidifier PIOVAN RPA2400 Year 2007 Booster Pump Green Box TCU 80/V/7 Year 2007 MV Unit Green Box MV 15/T Year 2007 Soft Drop MB Con...
2007 | 300047346 | HUSKY
More information
Shrink Wrapper for PET bottles. Semi-automatic SMI Shrinking line PB 800 Packer including shrinking tunnel Construction year 2008 for all kind of beverages, cans and bottle packs Capacity : 360 - 600 packs / h depending on size product length min. 110 / max. 630 mm product widh...
2008 | 300041913 | SMI
More information
Injection stretch blow moulding machines for PET bottles. Used Nissei ASB PF8-4B V3 Injection Stretch Blow moulding machine NO Molds available Dryer and plastic dehumidifier included Working hours: 86.500 approx Machine has been stopped in April 2023 ...
2006 | 300045429 | NISSEI ASB
More information
Injection moulding machine for PET preforms. Husky HyPET300 P100/120 E140 Construction year 2007 Supplied auxiliary equipment: Dryer/dehumidifier and T-conveyor belt Working with a mould 72 cavities 50x140 18.5g PCO1810 Hot runner available at extra price Removal robot Eisbär Resin dryer ...
2007 | 300047285 | HUSKY
More information
Injection stretch blow moulding machines for PET bottles. Nissei ASB 70 DPW injection stretch blow moulding machine The system included: - Nissei ASB 70 DPW - Conveyor - Resin Dryer, Fenco - Hopper working hours 87.000 approx The machine has been stopped in April 2023 ...
2008 | 300045426 | NISSEI ASB
More information
Handle applicator. Handle applicator Twin-Pack UNICLIP for plastic bottles Construction year 2005 Master" handle elevator and "Twin Pack mod. UNICLIP 2000/L" handle applicator with relative handle descent slide and sorter Machine dismantled but in very good condit...
2005 | 300046631 | TWINPACK
More information
Printing machines for food and beverages caps. Tampoprint Rotoprint rotary pad printing on bottle caps 28mm dia x 16mm tall Tamper evident speed 2000 caps per minute 3 colors 22 hours running time only Running Clockwise Still installed and can be seen running...
2020 | 300046838 | TAMPOPRINT
More information
Injection stretch blow moulding machines for PET bottles. Nissei ASB-70DPH from 2012 Neck- 24mm to 111mm Number of blow cavities 1 to 7 depending on molds Working hours: 94,049 Available in August Includes 3 sets of molds No auxliiaries included ...
2012 | 300047273 | NISSEI ASB
More information
Stretch blow moulding machines. ADS type 62 GD05 Construction year 2003 Including preform loading hopper 2018 Locking system renewed Bottle sizes: - PCO28 - 28/410 - 29/21 - 38mm 2-start / 3-start Available 38mm 2S und 28/410 Can be inspected immediately, machine in good con...
2003 | 300047602 | ADS
More information
Complete Non-carbonated Hot-Fill Line for drinks. Complete Hot-fill line for juices Krones complete line with Tetra Pak process Includes: - Pasteurizer Tetra Therm Aseptic Drink with buffer tank by Tetra Pak - Preform feeder Contifeed - Stretch-blow Moulder CONTIFORM H 08 with moulds - Filler - ...
2012 | 300043840 | KRONES
More information
Other Machines for Drinks. Bottle Top Crystallizer for Preforms Capacity: 16,000 pph Crystallization operation on 1810 Neck preforms Includes: ·Hopper ·Orientor ·Crystallizer ·Air chiller ·Thermoregulator Machine available Immediately! ...
2008 | 300044054 | BOTTLE TOP
More information
Injection stretch blow moulding machines for PET bottles. Used injection moulding machine for PET bottles Nissei ASB 70 DPH V3 Year: 2004 Working hours: 30.000 approx Dust extraction: Dega Chiller: MTA Dryer: MTA Air Booster: Blitz the offer includes 5 series of complete molds machine in working conditio...
2004 | 300044870 | NISSEI ASB
More information
Injection moulding machine for PET preforms. Complete system for preforms Netstal PET-LINE 60N/95 from 2012 Includes: - PET Injection system Netstal PET 2000-3700 R - 60 cavity injection mould Otto Hofstetter AG (27 gr and 30,5 gr) - Dryer Piovan 560 kg/h - Air dehumidifier RPA 1200, 1200 m3...
2012 | 300044958 | NETSTAL
More information
PET labelling machine. KHS Neo 80 labeller from 2019 Never used and in in original boxes Includes: Pre labelling inspector Neo labeller 80-105 2KL 2 labelling stations Bottle diameter: 45-90mm Bottle height: 110-380mm Change parts for 4 formats Label size. 40-120mm w...
2019 | 300045157 | KHS
More information
Injection stretch blow moulding machines for PET bottles. Nissei ASB 70 DPW injection stretch blow moulding machine The system included: - Nissei ASB 70 DPW - Conveyor - Resin Dryer, - Hopper working hours: 170.000 approx. The machine has been stopped in April 2023 ...
2002 | 300045431 | NISSEI ASB
More information
Injection moulding machine for food and beverages caps. Husky H225 RS55/50 injection molding machine from 2002 Running hours: 155.000 It was used for production of caps and closures Machine in working condition ...
2002 | 300045998 | HUSKY
More information
Sleever for PET bottles. Used sleever for PET/Cans/glass bottles Production: 2000 cph Includes oven and sleever Machine disconnected but it is possible to be tested in dry cycle ...
2020 | 300046322 | SCALIGERA
More information
Complete Can filling lines. Complete filling line for cans KHS from 1991 Capacity aprox. 27.000 cph Includes: 1. Depalletizer - KHS - Markant S1 1ASH PL 2. Can rope conveor DW40S 3. Can rinser DW4S 4. Filler - KHS - Delta VVF 40D from 1991, capacity: 28.000 cph (500ml), ...
1991 | 300046565 | KHS
More information
Beer filling. CIMEC FIller America 6-6-1 Tribloc Rinser / Filler / Crowner Construction year 2018 for glass bottles 330 ml can fill beer and carbonated drinks Bottle working high between 180 / 350 mm Bottle diameter 55 to 90 mm Table high 1050 +/- 50 mm Crown c...
2018 | 300046821 | CIMEC
More information
Injection stretch blow moulding machines for PET bottles. Used injection stretch blow moulding machine Nissei ASB PF 4-1BH V3 Included with the machine: - Matsui Dryer - Complete mould set: 4 cav., 48 mm, 72 gr (water)...
2010 | 300046924 | NISSEI ASB
More information
Stretch blow moulding machines. Stretch Blow moulding system SBO 20 serie 2 construcion year 1998 for CSD bottles Machine equipped with: Sidel hopper & feeder Sidel electrical cabinet AC Sidel control panel Sidel preform tipper Air recovering TECNOPLAN No moulds included No ...
1998 | 300047116 | SIDEL
More information
Stretch blow moulding machines. Side Maxiblow blower, year 2011 Output: 1100 bph Formats: 0.25L - 10L Neck: PCO 1810 / 38 mm It is possible to customise the neck by changing the spindles It has preferential heating 7,243,274 bottles produced Includes: - 3 molds: 50 cl & 1L PC...
2011 | 300047448 | SIDE
More information
Complete PET filling line for still water. Sidel complete PET filling line for still water Year 2014 Volume 500ml Output 36.000 bph Neck 30/25 Includes: Sidel Matrix SBO20 blow molding machine Sidel Combi filler/capper Sidel Rollquatro labeller SMI shrink wrapper AF compressor CIP unit Ch...
2014 | 300047510 | SIDEL
More information
Complete filling lines for carbonated drinks. Products: carbonated soft drinks and beer Bottle type (basic): from 0.5 l to 2.5 l volume PET closing type: PP screw-cap Neck PCO 1810 Labels: plastic RollFed Package format: 3x2,4x3 wrapped in heat shrink film Tray: Euro-type Line capacity - ...
2012 | 300043427 | BC
More information
PET labelling machine. Labelling machine Gernep from 2012 Model Rollfed 8-480 1RA Capacity up to 8.000 bph Label dimensions: min. lenght (bottom edge) 180 mm max. lenght (upper edge) 370 mm max. height 120 mm Length of conveyor 1900 mm Can work with bottles 0,7L, 1 l...
2012 | 300045253 | GERNEP
More information
Monobloc rinser filler capper. Melegari Isojet 35-35-7 CSD filling machine for PET bottles, year 2016 PCO 1810 cap Isobaric filler, with CO2 content: 8.4 g/l Filling temperature: less than 10ºC. Hours worked: 3350 (July 2023) Included: - spare parts - conveyor (1m) Available...
2016 | 300041557 | MELEGARI
More information
Injection moulding machine for PET preforms. Husky GL 300 P100/110 E 100 for PET preforms from 2003 Includes hopper, dryer, mould dehumidifier and mezzanine Running Hours: 95296 Chiller and mold not included Last audit January 2018 by HUSKY Auxiliaries: Handling / Robot Model FSI 200 GL...
2003 | 300041429 | HUSKY
More information
Stretch blow moulding machines. Used Stretch blow moulding machine Brand: Sidel Model: SBO 8 Series 2 Neck: 29/25 and PCO 1881 Oven: Caterpillar Working Hours: 20.000 Proform dumper included machine running and available in the middle of january available immediately ...
2004 | 300046359 | SIDEL
More information
Beer processing. Monoblock burner ELCO type N7-4500 G - EF 3 Construction year 2017 For natural gas E, L, LL Beverage category i2R Burner category EN 676 600 - 4000 kW Supply gas 80-500 mbar CE certified Immediately available! ...
2017 | 300046506 | ELCO
More information
Injection stretch blow moulding machines for PET bottles. Nissei- ASB-70DPH from 2010 Working hours 110,000 Still in production Neck: 24mm to 111mm Number of blow cavities 1 to 7 depending on molds Available in August Includes 3 sets of molds No auxliiaries included...
2010 | 300047280 | NISSEI ASB
More information
Stretch blow moulding machines. Urola USP-2 blower for PET bottles, year 2007 Output: 3200 bph Neck: 38; 28/410; 30/25; 26/22 Currently in production and available in April 2025....
2007 | 300047446 | UROLA
More information
Stretch blow moulding machines. Strech blow moulding machine ADS from 2003 Model: G61S Capacity: 800 bph Preform: 85g for 3L bottle 95g for 5L bottle Neck 48mm 3 start Includes mold for 5L bottle Working hours in August 52.000 Will be working untill October...
2003 | 300047562 | ADS
More information
Rotary compression moulding press. Used Sacmi CCM 002A 64 heads Year 2004 working hours: 89.700 Unscramble Pesce Elsak Mold: 37mm neck included in the deal BTV and CVS included Piovan polymer hopper not included The compression molding wheel had been substitued in 2021 Oil and wa...
2004 | 300046742 | SACMI
More information
PET Filler for W&SD. Eurostar filler for CSD & OPP PE labeller & Heuft level controller, 10.000 bph, year 2013 Output: 10.000 bph (0.25l glass), 4500 bph (0.5l, 1l PET), 4200 bph (1.25l, 1.5l PET), 3600 bph (1.75l PET) Bottles: Glass, PET and other polymers Neck: PCO ...
2013 | 300042435 | EURO STAR
More information
Injection stretch blow moulding machines for PET bottles. Nissei ASB PF4-1B Only 3.900 running hours Auxiliaries included: Piovan DSB 520HE Dehumidifying resin dryer and hopper Moulds included for 5L square and round shape, with container handle, 90 grams In production and available inmediatly...
1999 | 300042603 | NISSEI ASB
More information
Rotary compression moulding press. Complete compression molding line for one piece closures Sacmi Product: PCO-1881, neck 28mm, 2.55 gr. Capacity 500 pcs/min. Working hours: 82000 h The line includes: · Sacmi Rotary press CCM003C (of year 2006) with slitting machine · Sacmi Fold...
2006 | 300042662 | SACMI
More information
Air Compressors (High Pressure). Oil free used compressor for high pressure the system is composed of three machines: - Screw compressor Atlas Copco ZR250 - Piston two stage booster Atlas Copco 40D46 - Dryer Atlas Copco MD 600 Air Flow: 2500 m3/h Maximum Pressure: 42 bars th...
2003 | 300045333 | ATLAS COPCO
More information
Rotary compression moulding press. Complete compression molding line for closures SACMI ССМ003А Product: PCO1881, neck 28mm, 2.5 gr and PCO1810, 28mm 2,8 gr. Capacity 500 pcs/min. Working hours: 74,500 The line includes: · Sacmi Rotary press CCM003C (of year 2007) · Sacmi Fol...
2007 | 300045690 | SACMI
More information
Stretch blow moulding machines. Used Stretch blow moulding machine Brand: Sidel Model: SBO 8 Series 2 Neck: PCO 1810 Oven: Caterpillar Proform dumper included machine installed but not running available immediately ...
1999 | 300045746 | SIDEL
More information
Injection moulding machine for PET preforms. Complete injection molding system for production of PET preforms HUSKY GL300PET P100/110 E120, Constructon year 2003 Injection Unit: P100/110 E120, Clamping Unit: GL300PET, Dryer:Plastic System DR220HT Mold Dehumidifier Plastic System DSH1800 ...
2003 | 300045929 | HUSKY
More information
Stretch blow moulding machines. Used ARCOR Multiblow-02 Details Blower Technical Parameters: Made in Germany – 2013 EC conformity certificate Cavity-04 Productivity based on 1L- Max 6000 bh Connection Parameters: Electrical Parameters: · Power supply: 3 phase+ ground + Neut...
2013 | 300045942 | ARCOR
More information
Air dryer. Air dryer HITEMA model PS10.09 Year 2010 Max pressure Freon side 28 bar Max. pressure air side 12 bar Refrigerant R407C 2,7 kg...
2010 | 300046532 | HITEMA
More information
Injection moulding machine for PET preforms. Complete system for preforms Krauss Maffei 320-3500 CV PET from 2013 Includes: - PET Injection system Krauss Maffei 320-3500 CV PET from 2013 - 96 cavity injection mould Otto Hofstetter AG model PP513 - Neck 29/25 weight 10,5 gr - Dryer Piovan DP...
2013 | 300046552 | KRAUSS MAFFEI
More information
Air Compressors (High Pressure). Used compressor Brand: Atelier François Model: CE 68B Working hours: 22951 No Dryer included No Chiller included machine installed and possible to test it ...
2004 | 300047034 | ATELIER FRANÇOIS
More information
Air Compressors (High Pressure). Used compressor Brand: Atelier François Model: CE 680B Working hours: 18509 No Dryer included No Chiller included machine installed and possible to test it ...
2005 | 300047038 | ATELIER FRANÇOIS
More information
Stretch blow moulding machines. Stretch Blow moulding system SBO 16 series 2 construcion year 2003 for CSD bottles Machine equipped with: Sidel hopper & feeder Sidel electrical cabinet AC Sidel control panel Sidel preform tipper No moulds included No quick change included N...
2003 | 300047084 | SIDEL
More information
Pallet wrapper. Atlanta Getra Synthesi semiautomatic pallet wrapping machine, year 2015 With turntable speed adjustable by frequency inverter: 3 to 12 rpm Diameter: 1650mm Max. load dimensions: 1000mm x 1200 mm x 2200 mm (h) Max. load weight: 2000kg Usable coil...
2015 | 300047180 | ATLANTA
More information
Injection stretch blow moulding machines for PET bottles. Nissei ASB 70DPH from 2003 Neck 24mm to 111mm Number of blow cavities 1 to 7 depending on molds Available in August Includes 3 sets of molds No auxliiaries included ...
2003 | 300047281 | NISSEI ASB
More information
Moulds for Closures. Corvaglia 16-cavity mould for 29/25 closures for water caps, year 2013 Complete mold including cold half and hot runner 1,4g/cap (22,4g/mold)...
2013 | 300047205 | CORVAGLIA
More information
Moulds for Closures. Injection molding 48-cavity mold Plastisud 30/25 for water bottle closures, year 2012 1,78g/cap (85,44g/mold) 2 more Plastisud 30/25 molds available, years 2005 & 2009 All three molds are complete (with hot runner and cold half)...
2012 | 300047206 | PLASTISUD
More information
Stretch blow moulding machines. Stretch Blow moulding system SBO 20 serie 2 construcion year 1998 for CSD bottles Machine equipped with: Sidel hopper & feeder Sidel electrical cabinet AC Sidel control panel Sidel preform tipper PCC Touchscreeen V.2.02R4 Recovering system Tecn...
1998 | 300047130 | SIDEL
More information
Complete filling lines for carbonated drinks. Filling line Sidel for PET bottles for CSD from 2001 Capacity 10.000 bph, bottles 0,3L-2L, neck PCO1881 Offer includes: 1. Blower Sidel SBO 06 UNIVERSAL from 2006 2. Rinser Sidel (Alsim Asmojet 2-T 36) from 2001 3. Filler Sidel (Alsim RV-P45) fro...
2006 | 300047335 | SIDEL
More information
Cans filler and capper. Used monobloc for filling cans of soft drinks Brand: Sasib (Simonazzi) Model: Newcanfill NC 30S-AGM4R Year: 1995 Lid: 202 Production: 10.000 cph Format: Standard Seamer Comaco Sasib warmer tunnel model 95Pal included Machine available in Septembe...
1995 | 300047430 | SIMONAZZI
More information
Capping machine for glass bottles. Arol capper for glass bottles 1 liter glass bottle type of cap: 31 x 25 Bormioli weight of the machine 1000 kg machine in working condition ...
2004 | 300038567 | AROL
More information
Complete filling line for fountain water (19 L). Bardi water filler for 19L bottles Year of manufacture 2011 Output 300 bph Washer / filler Victoria 5G Junior / capper Siemens touch panel In good condition, currently disconnected and available immediately! ...
2011 | 300043488 | BARDI
More information
PET labelling machine. Roll Fed labeller P.E. Labellers Year 2008 Production 8000 bph Hot glue Machine installed but not in running condition, available immediately! ...
2008 | 300043527 | PE LABELLERS
More information
Complete PET filling line for still water. Complete Siapi PET filling line from 2005 Products: still water Production capacity of about 700 bph of 5.0 L and 450 bph of 10.0 L Filler working hours 500, produced only 10.000 bottles Blower for 5L bottles, 800bph and 10L bottles, 800bph mou...
2005 | 300045136 | SIAPI
More information
Labelling machine for glass bottles. Krones - Starmatic labeller from 2018 For glass bottles 14850 bottles per hour 300ml-1l bottles In excellent condition and available immediately! ...
2018 | 300045965 | KRONES
More information
Stretch blow moulding machines. KHS Blomax 6 PH, year 2003. Was producing glass cleaner (Clin) with it, small Neck capacity 3.500 bottles / hour Working hours 52.000 h Boxkipper and preform alignment included Hopper included Stretch rod included Very good mantained, can be in...
2003 | 300045884 | KHS
More information
Shrink wrapper for cans. Shrink wrapper DIMAC STAR 45T from 2006 For glass bottles or cans (0,5 L), conserves, potentionaly PET (up to height 41 cm) - foil and trays (coasters) Working hours ONLY 14.000. Type of packaged goods Bottles, Cans, Cans, Pots, Multipacks, Bricks...
2006 | 300046573 | DIMAC
More information
Vinegar filling lines. Filling line Fimer RT40-8PK for vinegar PET bottles, years 2004-2011 Output:4800 bph Includes: 1. Fimer RT40-8PK vinegar bottle monobloc, year 2004, with Arol capper Output: 9000 bph Neck: 21/29 Cap types: Stiligoutte & Duero Hours worked (April...
2004 | 300046830 | FIMER
More information
Air Compressors (High Pressure). Bellis & Morcom VH9H3N, year 2000 Max speed: 1.040 rpm It includes: dryer, airtank and chiller. It does not include cooling tower....
2000 | 300034163 | BELLIS & MORCOM
More information
PET labelling machine. Trine 650 roll-fed from 2002 Disconnected and available immediately! ...
2002 | 300039559 | TRINE
More information
Other Machines for Drinks. Including: 1. Water treatment station (biological and chemical), year 2015, which includes: - Capacity: 300 m3 /day, only 750 running hours - 2 complete membrane bio-reactors - 2 recycling inox tanks, capacity 9 m3 each - air compressors for aerat...
2012 | 300039599 | AQUAMATCH
More information
Injection moulding machine for covers. 300 Ton Husky Injection Molding Machine Manufacturer: HUSKY Model: G300 GEN RS85/70 Year:1999 Screw stroke: 340mm Screw L/D ratio: 24.7:1 Max Injection Pressure: 29,100 PSI Injection Capacity: 1308 cm3 Tonnage: 300 Tie bar spacing: 720mm X 720mm Cl...
1999 | 300043326 | HUSKY
More information
Complete PET filling line for sparkling water. Complete pet filling line for sparkling/still water Includes: Triblock RIVIBLOCK 50/60/12 system (rinser, filler and capper), with automatic cap feeder Year: 2001 Hopper capacity 10.000-13.000 caps Neck 1881, low thread and sport cap Rinser 50, ...
2001 | 300044206 | RIVI
More information
Sleever for PET bottles. Scaligera Sleeve machine from 2013 Model ULISSE 6000 + HOT AIR TUNNEL from 2013 MODEL TA4L Max. capacity 8000 pc/h Min/Max diameter of container (Neck) – 40/115 mm Outside diameter of foil roll – 400 mm Width of folded foil (layflat) – 45-180 mm C...
2013 | 300045254 | SCALIGERA
More information
Other Machines for Drinks. Steam generator Alba Makina from 2018 Model: D04-350 Steam output - 350 kg/h Weight - 600 kg Working pressure - 16 bars Fuel: gas natural The generator is new still on its pallet never been unpacked Complete technical documentaion including CE...
2018 | 300045882 | ALBA MAKINA
More information
Wines and spirits end packing line. Complete filling line KRONES capacity 7.000 bph Bottle formats: 330, 500, 700, 750, 900, 1000 ml The line was working with cider, sparkling wine and champagne Posibility of bottling beer in returnable/non-returnable bottle The line includes: 1. ...
1988 | 300046260 | KRONES
More information
Rotary compression moulding press. Used Sacmi CCM 003A 32 heads Year 2007 working hours: 74.000 Unscramble Pesce Mold: 28mm diameter included in the price CVS 051B included SCM 12LA included Piovan polymer hopper not included The compression molding wheel had been substitued in 2...
2007 | 300046743 | SACMI
More information
Complete Can filling lines. SIDEL CAN FILLING LINE Fills 330ml standard can Year of manufacturing: November 2006 Capacity: 48,000 cph x 330 ml Carbonated drinks Top lid: 202 type 66 filling valves – Pitch: 102,8 mm - anticlockwise Includes: -GEA Water chiller with plate...
2006 | 300046748 | SIDEL
More information
Stretch blow moulding machines. Stretch Blow moulding system SBO 20 serie 2 construcion year 1999 for CSD bottles Machine equipped with: Sidel hopper & feeder Sidel electrical cabinet AC Sidel control panel Sidel preform tipper PCC Touchscreeen V.2.02R4 No moulds included No...
1999 | 300047104 | SIDEL
More information
Packing machine for glass bottles. Carton packer SMI from 2008 Posible configurations: - bottles 500 ml 1x12, 1x20 - bottles 650 ml 1x15 Capacity max. 30 packs/min Available immediately!...
2008 | 300047212 | SMI
More information
PET Filler for W&SD. ALCA volumetric fillier Type RL 8 Construcion year 2005 For 5L-10L bottles With volumetric valves and ultra clean environment (with HEPA filter) Production capacity approx. 700 bph at 5L and 450 bph at 10L Filler working hours 500, produced on...
2005 | 300047221 | ALCA
More information
Monobloc rinser filler capper. Fogg carbonated drinks filling line Includes: Fogg FC-16/24/37 filler for carbonated products,24v filler, 16 head rinser, 3 head capper - Set up for 28mm bottle finish running an 1810 cap finish AXON sleave labeler and AXON tamper sleeve applicato...
2017 | 300046141 | FOGG FILLER
More information
Stretch blow moulding machines. PET blow molding machine Sidel SBO8-series2 Formats: 0,5, 1l, 1,5l and 2l bottles Neck 38mm Preform feeding system The current condition is that some parts had been removed but can be reinstalled (ex. Preform oven chain, air rotary union etc) Wo...
2000 | 300040746 | SIDEL
More information
Labelling machine for glass bottles. Labelling machine GERNEP for self-adhesive labels Type: Labetta 8-480/2 SK Year of manufacture: 2009 Number of stations 1 dispensing units and 8 plates For glass bottles Size of bottle 0,2 to 0, 75 l wrap around for self adhesive labels with a gap...
2009 | 300044636 | GERNEP
More information
Bottle inspector. Glass bottle inspector for empty bottles Krones Linatronic K 713 Formats: 7 types of them between 0.5 lt to 0.25lt Type of inspection: Bottom, Neck, Body (internal and external) , HF: Liquid waste on the bottom, IR: Oil waste and control of the b...
2001 | 300044984 | KRONES
More information
Complete Can filling lines. Simik can filler and seamer Speed 16.000 cph Volumes 180, 250, 330 and 500ml 40 filling heads 6 seamer heads Suitable for hot juice filling and CSD Includes infeed/outfeed conveyor Available immediately! ...
2009 | 300045181 |
More information
Rotary compression moulding press. Used Sacmi line for closures Includes the following: Sacmi CCM 003 from 2006 With lining and slitting machine Includes 1810 tooling Sacmi CCM 001 from 2003 Can be seen running and available immediately! ...
2006 | 300045648 | SACMI
More information
Wines and spirits end packing line. Filler for still wine Brand: GAI Model: 12.1R Production: 2000 bph Year: 2002 Cap: Cork cap Machine stopped in stored in the warehouse ...
2002 | 300045680 | GAI
More information
Stretch blow moulding machines. Blower SMF STRATOS 10E from 2016 for 3-10L bottles Includes: 1. SMF STRATOS 10E blower with a set of molds for one format 2. Preform feeder 3. Bottle receiver 4. Power Wizard - automatic temperature control system 5. Air recuperation system 6. Pref...
2016 | 300046349 | SMF
More information
Beer processing. Clarifier Alfa Laval Brew 701 for beer. Year 2016 Has not been used (0 working hours) Including pump Output: 100.000 L/H Low energy and water consumption. High clarification efficiency (99.9%). Low maintenance. Small size. Low noise level. Low temp...
2016 | 300046376 | ALFA LAVAL
More information
Stretch blow moulding machines. Blower ADS type 62 GD05 construction year 2003 including preform loading hopper 2018 Locking system renewed Bottle sizes - PCO28 - 28/410 - 29/21 - 38mm 2-start / 3-start Available 38mm 2S und 28/410. Working hours 60.000 Can be inspected imm...
2003 | 300046525 | ADS
More information
Shrink Wrapper for PET bottles. PMI Tray Shrink Bundler-Wrapper & Heat Tunnel Model Number CSI-20 - Mild Steel Construction with Steel-It Paint Coating - Straight Through Conveyor Design - Single Lane Design -maximum speed up to 25 trays/minute depending on applications - Bul...
| 300046558 | PMI
More information
Complete glass filling lines. Sidel Simonazzi filling line for returnable glass bottles Product: Soft Drinks Production rates: • 0,33 NRGB —> 35.000 bph • 0,35 NRGB —> 35.000 bph • 0,20 NRGB —> 32.000 bph • 1,00 RGB —> 18.000 bph Includes the following: - Depalletizer Grip...
1995 | 300046628 | SIMONAZZI
More information
Syrup Room. Sugar dissolving plant from 1999 Includes: 1. Not isolated 316L stainless steel tank for dissolving 35,000L with 2 horizontal agitators of 11kW 2. 250 kW IGEFA tubular heat exchanger. It is used to heat the water of the installation 3. ALFA LAVAL ...
1999 | 300046957 | ALFA LAVAL
More information
Other Machines for Drinks. Steam boiler LOOS UHD 800 from 1996 800 kg/h steam Allowable work pressure 10 BAR Allowable work temperature 184ºC 748 LTR Oil burner Weishaupt L3Z-A Available November 2024 All documentation available ...
1996 | 300046994 | LOOS
More information
Capping machine for PET bottles. Arol capper EAGLE/VP Year 2005 2 different closures for 38 mm caps All manuals available In very good condition Available immediately...
2005 | 300047218 | AROL
More information
Injection stretch blow moulding machines for PET bottles. Nissei ASB PB 80/110 16/4 injection stretch blow molding machine, year 2007 (2x available) It includes: - Resin dryer APD 200N - Mould dehumidifier AMD 300 - Material loading system - Mould temperature controller - AIS container inline leak detec...
2007 | 300044622 | NISSEI ASB
More information
Air Compressors (High Pressure). Used Siad Tempo 1500 No inverter included Working hours: 27.000 Latest maitenance at 25.000 working hours Machine dismantled in 2021 Machine dismantled and stored in the warehouse ...
2004 | 300045973 | SIAD
More information
PET labelling machine. Trine labeller from 2005 Roll-fed with hot glue For pet or glass Speed - 350 , 500ml - 400 to 450bpm 1.0L ,1.5L - 250 to 300bpm Label size 350ml - 2.25” x 7.625” ...
2005 | 300039538 | TRINE
More information
Injection moulding machine for food and beverages caps. HUSKY Injection moulding system for closures H800 RS115/100 from 2011 For caps 2,90g. PCO1810 with a contract cycle of 6.5 seconds The line is included: - Hot channel controller for mold - CapCooler, storage bin, orientator - Intravis video ins...
2011 | 300042076 | HUSKY
More information
Complete glass filling lines. Complete filling line KHS for water/soft drink/beer carbonated from 1994 Capacity - 24.000 bph. Returable bottles 0,33 L and 0,5 L Regular cap and twist-off Includes: 1 - Filler - KHS, Delta Trocic 72/12KK, from 1994 2 - Palletizing and depallet...
1994 | 300045024 | KHS
More information
Complete Can filling lines. Complete filling line Krones for beer from 1997 Capacity - 30.000 cph. Can 330, 440, 500 ml. Includes: 1 - Can filler - KRONES, from 1997 2 - Can depalletizer - Transpak from 2006, rinser Trantech Hysek from 1998, flash pasteurizer Arsopi from 2...
1997 | 300045022 | KRONES
More information
Pasteurization Tunnels. Sasib SCD5612 (Dual Deck- Single Pass) from 1999 Pasteurizing tunnel for cans ( 12oz, 16oz, 24oz)which can run 1200 can/min with additional 20% surge on Downline Length 102', Width 21', not currently being used right now but it can be turned on ...
1999 | 300045868 | SASIB
More information
Air Compressors (High Pressure). Compressors Neuman&Esser and Atlas Copco from 1994 and 1995 Max delivery pressure 45 BAR ZR4- 1842 m3/h NEAC- 1000m3/h Installed power 90 KW Available immediately!...
1994 | 300046681 | NEUMAN & ESSER
More information
Other Machines for Drinks. Bottle turning machine TTW Construction year 1999 For glass bottles 1L Invertor 180 degrees with central star and pneumatic vibrator For emptying loose particles in the bottle Approx. 10,000 bottles / hour Machine dismantled in April 2024 In ve...
1999 | 300046779 | TTW
More information
Complete filling lines for carbonated drinks. Filling line HANSA for PET bottles 0,5L - 2L 1993-2011 Capacity 10 000 bph Formats: 0,5L, 1,5L, 2,0L for carb and non carbonated drinks, neck 1881 Includes: 1. Blower SIDEL SBO 10 from 1994, 10.000 bph, Simens S5, preform feeder and trippler 2. Rin...
1993 | 300046934 | HANSA
More information
Complete filling line for fountain water (19 L). Used filling line for watercooler and big format bottles Brand: Bardi Model: Victoria 5G / LS12-3R Production 600 bph Format: 5 galons/ 19 liters 5 liters Capping machine for 5l brand: Kompass Decapping machine 18,9 Water tank with associated p...
2002 | 300047010 | BARDI
More information
Complete filling lines for carbonated drinks. Filling line for PET bottles 1,5L and 2,0L Superbloc 1993-2011 Model VK PET 100 SV K 129-592 Capacity: 12.000 bph Formats: 1,5L and 2L carbonated and non carbonated soft drinks, 1810 neck Includes: 1. Blower KRONES Contiform 112-10 Compact from 2...
1993 | 300047011 | SUPERBLOC
More information
Complete filling lines for carbonated drinks. Complete Berchi Parmatec filling line for CSD from 1998 Bottle type (basic): 0.5;1.5;2 L PET closing type: PP screw-cap, neck 28mm PCO 1881 Labels: precut - hot glue Tray: Euro-type Line capacity: 8.000 bph at 1.5L The line includes: Compressor ...
1998 | 300037545 | BERCHI
More information
Stretch blow moulding machines. Blow molding machine Krones Contiform S-10 from 2003 Dismantled, in very good condition and available immediately! ...
2003 | 300040034 | KRONES
More information
Injection moulding machine for PET preforms. Injection Molding Machine Nissei PM170/111M YOM 2012, 32 cavities Included 2 molds - 14,6 g neck38 mm and 35,5 g neck 28mm PCO Auxiliary equipment compressor, chiller, cabinet It was working only 4 years. Disconnected ...
2012 | 300040831 | NISSEI ASB
More information
Stretch blow moulding machines. KHS Blomax 6 - 1998 Neck is 1810 120 bpm for 500 ml Included: -Tipper -unscrambler -pform track - mold chiller -molds for 500ml and 1.5l...
1998 | 300044316 | KHS
More information
Beer processing. Filtration station - SCHENK from 1994, 250 hl/h. Includes: 1 - Kieselguhr feeder - Schenk from 1994 2 - Horizontal kieselguhr filter - 250 hl/h - Schenk from 1994 3 - Wasted kieselguhr tank - 30 hl - Schenk from 1994 4 - PVPP buffer tank - 20 hl...
1994 | 300045031 | SCHENK
More information
Beer processing. Brewhouse, Ziemann & Spomasz Torun from 2000 - 2015 400 hl x 12 brews per day Includes: 1 - Pneumatic transport compressor - Spomax, Mechanical transport system 23.5 m - Zumec 2 - Preliminary sieve cleaner - Spomasz Torun from 2015 3 - Malt silo -...
2000 | 300045030 | ZIEMANN
More information
Beer processing. Fermentation equipment from 1991 Direct ammonia cooling 24x1450 hl - total capacity 4x237 hl - total capacity Includes: - Fermentation tanks - Holvrieka - from 1991 - 1450 hl - 2 tanks - Fermentation tanks - Schmidding - from 1996 - 1450 hl - 16 ...
1991 | 300045375 | ELLINGHAUS
More information
Wines and spirits end packing line. Filler for still wine Brand: MBF Model: Synchrofill 20.20.4R Production: 4000 bph Year: 1999 Cap: Cork cap Machine stopped in stored in the warehouse ...
1999 | 300045681 | MBF
More information
Air Compressors (High Pressure). Belliss & Morcom WH28H3N Pressure: 40 ba 1223 m3/h 300hp compressor Includes: Control/Starter Panel...
2000 | 300046347 | BELLIS & MORCOM
More information
Do you need advice?
We will guide you through the entire process of buying and selling used machinery in a changing and complex international environment. Our sales, logistics, legal, and marketing teams will accompany you throughout the process to make the operation easy and risk-free.