Cup Form-Fill & Seal machines. Cup form, fill and seal machine Illig FS37, year 2019 for cream cheese APET container with ALU lid materials Output: 12,000 packs per hour. Volume: 35 g Cup size: 135 x 51 x 23 mm Cups with two compartiments: breadstick & cream cheese Maximum f...
2019 | 300044762 | ILLIG
More information
Blister and Skin. Card dimension min-max : 450x400 - 770x500 Card weight max : 600 g/m2 Material width : 540mm Height of package : 100-150 mm Number of cycles at 100mm package height : 3 Number of cycles at 150mm package height : 2,5 Weight of product on total card ma...
2016 | 300045923 | ILLIG
More information
Thermoformer. Thermoforming line with adjustable window plates. Can do twin sheet if needed Currently the machine process semi-finished products up to 8 mm thickness. 10 mm is certainly also possible . All common thermoforming semi-finished products such as ABS, ...
2001 | 300045717 | ILLIG
More information
Blister and Skin. Unwinder RO540 Thermoforming unit Positive vacuum forming Negative forming by compressed air Forming area max. : 500 x 300mm Forming area min.: 100 x 35mm Depth of draw positive max.: 80mm Material width max.: 500mm Material roll diameter max. : 900...
2008 | 300046102 | ILLIG
More information
Blister and Skin. Max working area : 350x250mm Max blister depth / height of sealing receiver : 130mm Number of sealing receivers : 4 Electrical consumption of sealing heater : 1.75 kW Total electrical consumption : 2.15 kW Sealing force : 13 kN It is in excellent wor...
1989 | 300044091 | ILLIG
More information
Blister and Skin. Machine for skin, blister and standard thermoforming. The machine has : 1 robot for automatic carton placement on the table 1 conveyor belt 1 thermoforming machine 1 trimming block with guillotine puller + punch-die punch holes, longitudinal separat...
1995 | 300045406 | ILLIG
More information
Thermoformer. Includes a 95 mm diameter HIPS cup mould and 14 sets of interchangeable insert parts with capacities from 0.2 to 0.5 litres Maximum material width: 525 mm Clamping force: 15 000 daN Number of cycles: 40/min....
1987 | 300043886 | ILLIG
More information
Thermoformer. Forming - cutting - stacking Forming machine: Min-max forming area : 400x250-700x500 Min-max film width: 440-750mm Height of parts above / below the film level: 120 / 40mm Diameter of Film Reel: 1200mm Connected electric power from upper-lower heate...
1998 | 300045659 | ILLIG
More information
Thermoformer. Only 2640 Working hours The machine has an automatic changeover function, upper punch with pneumatic drive, mould table with pneumatic drive and position storage. Electric heating, individual heating pattern is stored, energy-saving mode during work...
2008 | 300045934 | ILLIG
More information
Blister and Skin. Illig HSA 50b : Max sealing area : 500 x 300 mm Max blister depth : 80mm Max carton size : 1-fold : 500 x 300 mm 2-fold : 248 x 300 mm 3-fold : 164 x 300 mm 4-fold : 122 x 300 mm 5-fold : 97 x 300 mm 6-fold : 80 x 300 mm 7-fold : 68 x 300 mm 8-fold ...
1982 | 300044723 | ILLIG
More information
Preheaters. Max film width: 610 mm Maximum foil thickness: 2.0 mm Heating roller: 35.4 kW Air heater: 4 kW Max speed: 35 m / min. Max Heat temperature: 140 ° C ...
2008 | 300045111 | ILLIG
More information
Blister and Skin. It has been used with the following films: Bottom film Width: 315 mm Thickness: 350 µm Top film/cover film Width: 300 mm Thickness: 112 µm Feeding system Roll fed Depth of draw positive/negative 65mm/65mm Cycles / min: 20 Closing force: 20 kN ...
2004 | 300045067 | ILLIG
More information
Thermoformer. Thermoforming machine with automatic sheet loader Max. Plate width: 650mm Ceramic heaters Total heating elements: 30 kw Control of the heating elements: Top heating: 3 control circuits Bottom heating: 2 control circuits Equipment: -Screen control ...
1988 | 300046166 | ILLIG
More information
Thermoformer. Refurbished in 2016 Depth of Draw: positive 600 mm; negative 300 mm Preheater Feed length: 1000 mm Photo cell sagging control Pneumatic plug assist...
2007 | 300045543 | ILLIG
More information
Blister and Skin. Feeding system Roll fed Thickness: 0,3 microns Max. sheet width 350 mm Depth of draw positive/negative 65mm/65mm Cycles / min: 20 Closing force: 20 kN Drive: 3,3 kW Electrical usage: 24,2 kW Air consumption: 10 bar Working hours 2000 h Frequency: 60...
2006 | 300039681 | ILLIG
More information
Thermoformer. Forming area min. 300x100 mm Forming height above/below sheet : 100/30 mm Sheet width: max./min. 550/340 mm Max. number of cycles: 18/minute depending on materials Pneumatic system Plug assist Vertical adjustment of the lower part of the forming tabl...
1989 | 300044955 | ILLIG
More information
Thermoformer. Illig vacuum forming and deep drawing machine type UA150 ED: -Upper side Plug Assist unit with remote adjustment -6-fold cooling fan reinforced -upper heating with small radiator circuit -material sag control -Special programme for tool cooling ...
1988 | 300045835 | ILLIG
More information
Thermoformer. The machine will be available from middle October. Operating hours: 81.000 h, still in production Stations: Forming, Cutting and Stacking Min Forming Area: 300 x 160 mm Film width: 540 mm Height of Forming Above-Below Material Level: 100 / 40 mm...
2004 | 300044482 | ILLIG
More information
Thermoformer. Forming machine ; Forming area min. : 300 x 100 mm Material width max./min. : 540/340 mm Part height above/below working height : 100/30 mm Material roll diameter : 1200 mm Suction capacity of vacuum pump : 40 m3/h Installed electrical load of top he...
2012 | 300045384 | ILLIG
More information
Blister and Skin. Skinpackaging, blister and universal forming machine The machine has : 1 conveyor 1 forming machine 1 block carver shooter with GUILLOTINE + holes of brooch awl-matrix, longitudinal separation by Thumb wheels of cut. Cardboard size : 495x955 mm She...
1985 | 300029976 | ILLIG
More information
Thermoformer. Forming area: max. 500x350 mm, min. 300x100 mm Height of forming above/below working level: 100/30 mm Film width: max./min. 550/340 mm Film thickness: max. min./max. 0,3/1,3 mm Speed: 18 cycles/min depends on material Pneumatic system for table and c...
1998 | 300044142 | ILLIG
More information
Thermoformer. 3 stations : forming - cutting - stacking Forming machine Forming area: min. 300 x 100mm Part height above/below material level: 100/30mm Material width: max./min. 540/340mm Feed accuracy (marked on the skeleton bridges): +/- 0.3mm Installed power ...
1995 | 300046015 | ILLIG
More information
Trim presses. The machine is in perfect condition, it was working until the closing of the factory in 2022. It can be visited but not put into operation. Grinder included 15 Kw cutter + 5,5 Kw grinder + cyclone Reel width : 800 mm Area : 1000 x 510 mm Speed : 25 t...
2000 | 300045402 | ILLIG
More information
Thermoformer. Thermoforming capacity 500 X 700 X 100. With the following options: - Waterproof housing with bubble system. - Heating transmitters selectable by switches - Possibility of mounting reduced frames and width reduction beams. - Set of h...
1981 | 300026831 | ILLIG
More information
Trim presses. Motor: 0.55kw/1.5A Max cut width: 450mm Max. cut length: 500mm Max cut heigh: 120mm...
1970 | 300036483 | ILLIG
More information
Thermoformer. Control was changed in 2015 Pneumatic Drive Sheet width: 1000mm Ceramic Heaters Power of Heater: 26kW 3 Heating Zones Power Consumption: 30kWh, 40 A Working hours 1000 ...
2014 | 300044501 | ILLIG
More information
Thermoformer. Forming machine Forming area: min. 300 x 100mm Part height above/below material level: 100/30mm Material width: max./min. 540/340mm Feed accuracy (marked on the skeleton bridges): +/- 0.3mm Installed power upper heating: 9.8kW Installed power lower ...
1991 | 300043856 | ILLIG
More information
Thermoformer. Thermoforming line with adjustable window plates. Currently the machine process semi-finished products up to 8 mm thickness. 10 mm is certainly also possible . All common thermoforming semi-finished products such as ABS, ASA, PE, PP, PVC, PC, PET e...
2000 | 300045730 | ILLIG
More information
Thermoformer. Max Film width 730mm Scope of equipment: - Unwinder - Open preheating station - Heating station - Forming and punching station - Stacking unit - Grinder Technical equipment: - Siemens S5 control - Upper and lower heating - Pneumatic upper punch ...
1998 | 300045995 | ILLIG
More information
Thermoformer. Materials : ABS, Polypropylene (PP), Polyethylene (PE), Poly carbonate (PC), Polystyrene (PS), Polymethylmethacrylate (PMMA) Impact 7000, Makrolon Polyethylene foams Expanded materials (EPS) Types of products : Industrial parts Sanitary articles (h...
1985 | 300040990 | ILLIG
More information
Thermoformer. In mold cutting station Output: 40 Cycles/Min Mold closing force: 150KN Feed length: max 300mm Photo cell: IFM sensor Pneumatic plug assist Drive: Sew Eurodrive Control Panel: Schleicher Power of each heater: 20x650W, 70x400W Regulation of heating ...
1998 | 300042471 | ILLIG
More information