SML - EcoCompact - CC/90,90,60,60/2700/650Layers no. 5 , Web Width 2000 mm Layer distribution for stretch wrap film A / B / C / B / D
Mechanical speed max. 650 m/min
Range of film thickness for stretch wrap film 9 - 55 µm
Final film width 4 x 500 mm
Necessary cooling capacity approx. 647 kW (556.000 kcal/h 12/17 °C)
Contro... | Stretch film extrusion line | 2013 | |
MACCHI - BOPLUSRewinder typeBack to back , Web Width max. 2500 mm Cold parts extrusion line:
Upper calibration basket
Haul off with gusseting device
E+L web guide
Double BOPLUS rewinder, gap-mixed-contact with Siemens+ABB electronics
Total refurbishment in 2010 (completely new electrical panels, new on-board electr... | Winder for extruded film | 1999 | |
REIFENHAUSER - Midex 7-300Materials PP / PE , Film Width (Max) 2900 mm Speed 50-350 m/min.
Coextrusion: Reifenhäuser; REIcofeed II 3-layer (ABC)
Section A:
Dosing:Somos; 4-component gravimetric unit
Extruder: Reifenhäuser; Evolution RT 030-1-80-30D, Ø 80 mm
Screen changer: Kreyenborg; manual changer type HS-080
Sectio... | Cast coextrusion lines | 2012 | |
REIFENHAUSER - KIRION 70/100/70 F , Film Width (Max) 2200 mm KIEFEL KIRION® 70/100/70 F 3-layer coextrusion line,
KIRION® 250/500-3, 3-layer die head with 500 mm die diameter, KIRION® T 2200 reversing film take-off,
KIRION® W 2200 Plus2 automatic contact/gap/central winder and a KIRION® C automation system
KI... | Coextrusion lines | 2007 | |
MAM - CoexMaterials BIO , Film Width (Max) 1620 mm Extruders 3x65 mm LD 27
3 components EnginPlast dosing units for each extruder
Head with 220 mm die and IBC
Gap 1.35/1.8 mm
Rotating haul off
Web guide
Chiller
Thicknesses currently produced 16- 28 my
Thickness control system not working
Available f... | Coextrusion lines | 2004 | |
GHIOLDI - CoexMaterials LDPE , Film Width (Max) 1600 mm Film structure A-B-C
Layer structures 15% - 70% - 15%
Film width max.1600mm
Max output 360kg/hr approx.
(LDPE - 350mm die - 50microns - 1600mm width)
Thickness range : 20-150microns
Line compositon :
1x E-75-AP extruder (L/D 30 ; 75mm screw)
20... | Coextrusion lines | 1999 | |
MARTIGNONI - C120/S7 AutomaticWeb Width 1700 mm Discharge cylinder diameter : 120mm
Voltage RMS on cylinders : 10000V
Number of send back cylinder : 1... | Corona treatment | 2006 | |
SML - MDO / 2100 / 250Film Width (Max) 2100 mm , Parent Roll Diameter 1200 mm Line for the production of Oriented PP-/PE-/foamed-/breathable film
Max. reel diam. at unwinder: 1200 mm at a material density of 0,9 kg/dm3.
Max. reel weight: 2800 kg
Max. stretching ratio is 1 : 10
Max. mechanical speed at the outlet of the stret... | Monoaxial Oriented Line MDO | 2008 | |
WINDMÖLLER & HÖLSCHER - Filmatic KRewinder typeBack to back , Web Width max. 1524 mm Core diameter 3&6 inch winding shaft
Type of materials : LD, LLD, EVA, Metallocene
Max reel weight : 680kg at max dia and width
Unloading system : Hydraulic arm... | Winder for extruded film | 1998 | |
COLINES - ALLrollEX 1500Layers no. LLDPE 5 , Web Width 1500 mm 5 Layer Cast Film Extrusion Machine for the production fo stretch film, in hand, machine and jumbo reels
4 extruders
A: Single screw Perform-EX 55 mm , l/d 34 with infrared heating with Doteco gravimetric batch dosing system with 2 components
B: Si... | Stretch film extrusion line | 2020 | |
WINDMÖLLER & HÖLSCHER - VarexMaterials LDPE, LLDPE, HDPE , Film Width (Max) 1600 mm Extruders configuration: 50/70/50.30D
Die Model: B 225/315-3
225mm for HDPE and 315mm for Schrink and Stretch film
speed: 120m/min max
Optifil Plus control unit
Thickness control OPTIFIL K
Filmatic K Double winder (renovated in 2019)
Film thickness: ... | Coextrusion lines | 2002 | |
SYNCRO - Mybatch Gravimetric dosing units
The accuracy, quality and simplicity consolidated in the construction of thousands of EASYBATCH units installed around the world are combined in MYBATCH to the elegant design, the modularity and the slender dynamics of today.... | Extrusion lines upgrade | 2022 | |
COLINES - AllrollEx 1500Layers no. 5 , Web Width 1500 mm 5 layers coextrusion cast film line for the production of stretch film for hand, machine and jumbo rolls
Structure film ACBCD
Extruders 3x 55/34 mm with gravimetric system 2 components, 1x120/30 mm with gravimetric system 4 components
Flat extrusion ... | Stretch film extrusion line | 2017 | |
SML - CPP CC, 120/45/45/2100/250Layers no. 3 , Web Width 1500 mm 3-layer extruder suitable for the production of
Manual and automatic Stretch Film.
PP Cast film
PE film for printing, lamination and sealing.
Material thickness: 18 to 100 my
Production
LDPE: up to 500 kg/h
PP: up to 450 kg/h
Working hours ap... | Stretch film extrusion line | 2002 | |
KUHNE - K45F-24D; KFB45/45/45-1200Materials LDPE; LLDPE; blends HDPE/LLDPE , Film Width (Max) 1200 mm 3x 45 mm extruders
Thickness from 10 my
AFS corona treater
Vollmann gravimetric system
Rotating die head 195 mm with IBC
Gap 1mm
Air Ring manual; Octagon Smart lip
Thickness control system not working
Gusseting device... | Coextrusion lines | 1997 | |
KWEEN B - CE 45Materials HDPE , Film Width (Max) 1000 mm Thickness range: 0,012 - 0,150
Rotating Die Head
Gusseting device: Yes
Fixed Haul Off
Web guide: straight edge
Corona treatment: Yes
Max. reel diameter: 550 мм.... | Mono extrusion lines | 2001 | |
KWEEN B - MB 40Materials HDPE , Film Width (Max) 600 mm Film thickness range min.-max.: 0,006-0,020
Fixed Die Head
Gusseting device: Yes
Fixed Haul Off
Corona treatment: Yes
Max. reel diameter: 500 мм
PLC interface language: English
Screws were replaced
Second identical line is available at the same pric... | Mono extrusion lines | 2000 | |
AHLBRANDT - TG 1005Web Width 2225 mm , Roll DiameterKW 10 The 2 devices are currently working satisfactorily until this summer, when they will be replaced by larger machines.
Each machine consists of an electrical cabinet and a discharge station. See pictures.
The discharge station consists of a discharge r... | Corona treatment | 2000 | |
BRAMPTON_ALPHA MARATHON - Aqua frostMaterials PP,PP,tie,PA or EVOH,tie,PE,PE , Film Width (Max) 850 mm Water Quenched Blown Film System
7 layer Aqua frost line originally bought from BRAMPTON ENGINEERING
Film width: up to 850mm depending upon the ring sizes
Output or the extruder: 300 kgs per hour depending upon the ring size and thickness of the fi... | Coextrusion lines | 2006 | |
ALPHA MARATHONMaterials LLDPE / LDPE , Film Width (Max) 1000 mm Film width : 400mm - 1000mm
Thickness : 25micr - 130micr
Output extruder : 75 - 120kg/h
Gravimetric dosing system / 5 components
5 TSM vacuum loaders, TSM Blender
Screw 90mm ; L/D 27
10 heating zones
Driving system : PLC + inverter
Power : 125kW
Melt... | Mono extrusion lines | 1996 | |
KUHNE - WQB3/700-1Materials PP/TPP/PP , Film Width (Max) 700 mm Water-quench 3 Layer blown film extrusion line turned up-side-down for production of Films (ex. Medical) of PP/TPP/PP
Layer Structure: A - B - C
H-PP /T-PP/H-PP
20-25 % / 50-60 % / 20-25 %
Extruder capacity
K 105 - 30 D: max.250 kg/h PP
K 6... | Coextrusion lines | 2013 | |
MACCHI - BOPLUSRewinder typeBack to back , Web Width max. 2000 mm Cold parts extrusion line:
Upper calibration basket
Haul off with gusseting device
E+L web guide
Double BOPLUS rewinder, gap-mixed-contact with Siemens+ABB electronics
Total refurbishment in 2010 (completely new electrical panels, new on-board electr... | Winder for extruded film | 1999 | |
TECOM - E50 30SMaterials LDPE , Film Width (Max) 900 mm Film width min. 300 mm
Dosing unit - 2 components
Screw diam. 50 mm
Fixed die head diam. 120 and 150 mm
Rotating take- off
Single rewinder for reel diam 850 mm
Corona treatment
Perforation unit
AC motor... | Mono extrusion lines | 1980 | |
BANDERA - SL 3000Rewinder typeSingle , Web Width max. 2700 mm Automatic rewinder that has been working only 3 years
Width 3000 mm, usefull 2700 mm
Diam MAx reels 1000 mm
Speed 5-50 mt/min
2 shafts availabe 5'' (possible to use shaft from 3'' to 6'')... | Winder for extruded film | 2009 | |
PLAST PROJECT - PCV CLING FILM TR120Layers no. 1 , Web Width 1600 mm Complete line for stretch pvc production
Average power consumption about 100 - 115 kW/h
Single-screw extruder 120 mm
Possibility to wind rolls on cores of diameters 76 and 112 mm (two sets of pneumatic expansion rollers).
The line has two working h... | Stretch film extrusion line | 2013 | |
KOLSITE - KET-33460Materials LDPE, LLDPE, HDPE, PP , Film Width (Max) 2100 mm
2100 mm layflat 3-layer IBC Blown Film Line. Kolsite. 25-200 micron, 1:2:1.
2 x 60 mm 30:1 Extruder, 55 kW AC drive. 4-zone 12.8 kW ceramic heaters & blowers.
1 x 75 mm 30:1 Extruder, 90 kW AC drive. 5-zone ceramic heaters & blowers.
Each e... | Coextrusion lines | 2012 | |
WINDSOR - REX-1500Materials LDPE, LLDPE, PP, HDPE , Film Width (Max) 1600 mm
Installed in 2012 Windsor-Kuhne coex 3 Blow film Extruder
Windsor IBC REX-1500.
60+75+60 mm Extruders
56+75+56 kW motors.
Prasad Hopper Loader.
1-comp. DOTECO Gravimetric Dosing
GSM control system (2016) with Gravimetric gain-in-weight batch Blend... | Coextrusion lines | 2011 | |
VENUS - VN AS 50 A-750Materials HDPE , Film Width (Max) 700 mm Extruder 50; L/D 28:1
Fillm width from 250 to 700 mm
Thicknesses 8-80 my
Fixed die head with die plates 70 and 100 mm
Air Ring type: Air blower inverter 5 HP
Screw and barrel changed in 2012
Tower included... | Mono extrusion lines | 2001 | |
SML - CC 150, 75, 75/3200/450AC50MaterialsPP LDPE, LLDPE, CPP , Film Width (Max) 2650 mm 3 Coex Castfilm for CPP, stretch wrap film and barrier films
Maximum film width which can be produced:
- stretch wrap folie 5 x 500 mm
- CPP 2650 mm
- CPE 2800 mm
Thickness range:
- CPP 20 - 35 µm
- Stretch film 15 - 30 µm
- LLDPE (75%) + PP (25%... | Cast coextrusion lines | 2003 | |
COLINES - ALLrollEX 1500Layers no. 3 , Web Width 1500 mm 3 Layer Coextrusion line for the production of hand and machine streetch Film
MAIN TECHNICAL DATA:
Raw material 100% LLDPE - Butene, Hexene, Octene, Metallocene MFI, in any case compatible with stretch film production
Film useful width: 3 x 500 mm
... | Stretch film extrusion line | 2014 | |
DMT - BOPSBiaxial Material TypeBOPS , Film Width (Max) 3200 mm Extrusion BOPS line composed by
6 silos for feeding material
Gravimetric dosing unit 5 components Spiroflux
Kuhne extruder Model “800 34:1 W/C EXT
Continuous screen changer Hi Tech
Melt pump and Automatic Die Farcom
Calender
MDO
TDO
Scantech thickne... | Bi-axial film extrusion and stretching line | 1999 | |
WINDMÖLLER & HÖLSCHER - Filmex , Film Width (Max) 1750 mm Film structure:
A/B/C/D/E
E/D/C/B/A
C/A/A/A/E
Materials:
Cast PP thickness min/max 20- 250 µm
Barrier film
Mechanical speed max. 200 m/min
Extruders:
Filmex 120.30 A/ PT/PP
Gravimetric dosing unit 3 comp
Filmex 50.25 B/ HDPE
Gravimetric dosi... | Cast coextrusion lines | 1994 | |
POLYREMA - RT 1101-1-80-30 DMaterials HDPE; LDPE , Film Width (Max) 1300 mm Thickness range: 30-130 my
Fixed die head : diam. 375 mm
Gap : 1,6 mm
Dosing system: Volmer; gravimetric
Motorized calibration basket
Rotating haul off
Web guide: E & L CENTRE GUIDING SISTEM 1400
Corona treatment: Simco
Rewinder: back to back; max. d... | Mono extrusion lines | 2004 | |
MAM - ES/KB/70Materials HDPE , Film Width (Max) 1500 mm Minimum thickness 7 my
Maximum thickness 50 my
Rotating die head
Die plates: 150/180/220/240 mm
Gap: 1,3
Rewinder: max. diam 1000 mm
Corona treatment: Martignoni
Fixed haul off
Gusseting device: yes, max. 300 mm
Available from December 2022... | Mono extrusion lines | 1992 | |
TECOM - EK 65” L/D Materials LDPE, HDPE , Film Width (Max) 1600 mm Thickness range: HDPE: 7 – 40my LDPE: 20 – 180 my
Rotating die head
Die plates: 150/220/340 mm
Gap: 1,3 (150/220/340) and 2,4/150
Rewinder: max. diam 1000 mm
Corona treatment: Cason
Fixed haul off
Gusseting device: yes, max. 300 mm
Available from De... | Mono extrusion lines | 1994 | |
SHUBHAM EXTRUSION INDIA - SE3HR-S0-1590, ABAMaterials LDPE / HDPE , Film Width (Max) 700 mm Thickness range: 25 Micron / 100 Micron
Dosing system : Hopper Auto Loader
Number of components: One
Screw : Middle, Inner / Outer, 45 MM
Heating zones: 11
Heating power: 27.6kW
Driving system: AC Variable Speed Drive, ABB
Power: 20 HP + 15 HP (Total... | Coextrusion lines | 2017 | |
WINDMÖLLER & HÖLSCHER - E 90Materials LDPE, LLDPE , Film Width (Max) 1670 mm Rotating haul off
LD 30
Die head 350 mm with IBC
Thickness 20-150 my
Corona treatment Cason
FIFE web guide
Motorized calibration basket
Gravimetric unit PLAST CONTROL year 2011
Screw and barrel almost new
Tower included - built in year 2019... | Mono extrusion lines | 1983 | |
SYNCRO - SYNTROLplus 4.0 SYNTROLplus 4.0 is the SYNCRO turnkey supervisory system designed for new extrusion lines but also able to be retrofitted on to an existing blown or cast film line replacing the old line control system
Based on industrial B&R PLC technology, SYNTROLp... | Extrusion lines upgrade | 2021 | |
COVEX - CoexMaterials HDPE LDPE , Film Width (Max) 1500 mm - die-head diameter 165 mm
- extruder diameter 3x 60 mm
- range of thickness 20-150 my
- COVEX cooling ring
- gravimetric system CONTREX DE 3000E, 3 components - 1 per extruder
- the IBC system
- corona treatment MARTIGNONI HFIGBT
- rotating haul-off... | Coextrusion lines | 2000 | |
KUHNE - GREEN LINE C5-2000MAX TL TYP FB 507-20-1MaterialsPE LD-PE, LLD-PE, PP and blends with PE-MD, PE-HD,EVA , Film Width (Max) 2000 mm Fixed die head TYP 5 WV - IBC 5, die plate 350 mm, gap 1,5. Additional gap ring with gap width 2.8mm
Thickness range:20-250 my
Dosing system OCTAGON, 1+4 (A,C,E extruders) and 1+3 (B, D extruders) components.
Suction units MOTAN in each dosing un... | Coextrusion lines | 2012 | |
BLACK CLAWSONLayers no. 5 , Web Width 3000 mm 4 extruders 5 layers ABCBD cast film line for stretch wrap films.
Extruder A 88.9 mm 272 kg/ , 2 gravimetric dosing unit Maguire, hydraulic screen changer
Extruder B 114.3 mm 545 kg/h, 4 gravimetric dosing unit Maguire, hydraulic screen changer
Ext... | Stretch film extrusion line | 2006 | |
CARNEVALLI - E50Materials HDPE LDPE , Film Width (Max) 1200 mm LDPE: 20 to 200 µm. Sleeve 400mm-1200mm
HDPE: 9 to 20 µm. Sleeve 800mm-1200mm
Extruder
Driven by 40C.v. variable speed AC motor.
Helical gear reducer
Cylinder ø50mm
Thread ø50mm, L/D 25:1 for high and low density
Head
Model CA-33
360º rotation
Thr... | Mono extrusion lines | 2000 | |
DMT - BOPPBiaxial Material TypeBOPP , Film Width (Max) 4200 mm 3 layers BOPP film / 3 extruders
Nominal Film Thickness Range 15-40 my
Extruder Screw diameters: 200 mm main Extruder ( center layer ), Davis Standart
two 50mm Satellite Extruders, Davis Standart
Scr... | Bi-axial film extrusion and stretching line | 1995 | |
KWEEN B - MB-40Materials LDPE/HDPE , Film Width (Max) 600 mm Thickness of film produced from 0,004 to 0,8mm depending on kind of material
Max film width with gusset 600mm
Max film width without gusset 350mm
Take up shafts double 500mm.
Die head diameter 60mm
Web coolling by fan
Fixed tower included
Corona tr... | Mono extrusion lines | 2004 | |
KWEEN B - HA 55Materials LDPE , Film Width (Max) 1100 mm Film thickness 8÷200 micron.
Take-up rollers double 1200mm
Maximum width of film without gusseting 1100mm
Maximum width of film with gusseting 1500mm
Die diameter 80mm
Electrically extendable tower
Rotary head
Water cooled screw
Corona treatament... | Mono extrusion lines | 2006 | |
NEXTROM - 5 layersLayers no. 5 , Web Width 2000 mm 4 extruders for automatic and manual stretch film (the line has always produced automatic)
Automatic head CLOEREN 2400 mm, useful 2000 mm
Thickness control ELECTRONIC SYSTEM with beta rays
Materials: LLDPE / LDPE
Thicknesses: 15-35 micron
Chill r... | Stretch film extrusion line | 2001 | |
KANG CHYAU YDA 1F - KMT 55/1000Materials LDPE , MDPE, HDPE , Film Width (Max) 1000 mm Manual cartridge filter changer
Single layer rotary head, mouthpiece 80mm and 200mm
Basket 1000 mm
Haul off 1000 mm
Back to back winder 1000 mm
Activator
Tower 4 m
Full manufacturer documentation... | Mono extrusion lines | 2014 | |
SML - EasyCast CC/90, 60, 60/2100/650Layers no. 5 , Web Width 1500 mm Coextrusion Cast film line - EasyCast for Stretch Wrap film
For hand / machine / jumbo rolls
3 extruders – 5 Layers: B/A/A/A/C
Film Thickness range: 8 to 45 micron
Final film width: 3x500 mm
Raw materials: LLDPE & VLDPE
Extruder A & C (LLDPE)
Size :... | Stretch film extrusion line | 2015 | |
POLYREMA - SFA 1600 SFA HSPRewinder typeSingle , Web Width max. 1600 mm SFA 1600 HSP single station surface winder equipped with:
Pre haul-off
Pre acceleration of the winding shaft
Tension control for web tension 400 N
Tension control for winding tension 400 N
Automatic cross cutting after reaching the number of met... | Winder for extruded film | 2016 | |
DING KUEN - TK-EA45-2SMaterials HDPE, LDPE , Film Width (Max) 650 mm Film width: 200-650 mm
Thickness range: 0,008-0,15 mm
Screws : 45 mm
L/D: 30/1
Die plate: 80 mm
Gap: 1,2 mm
Calibration basket: manual
Fixed die head
Gusseting device: manual
Rewinder: automatic... | Coextrusion lines | 2007 | |
WINDSOR - COEXMaterials LD /LLD/ HDPE , Film Width (Max) 1800 mm
Currently producing for Laminates, surface protection film etc. This machine is not for barrier films
55+60+75+60+55 Extruder Diameters(Power: 22+30+45+30+22 kW motors)
1+3 comp. CONAIRE gravimetric Dosing Units.
375 x 2.2 mm Die.
IBC with ... | Coextrusion lines | 2020 | |
REIFENHAUSER - KIEFEL E.CO.S W1600 / OPTICA KIRION 50/60/50 Materials LDPE, LLDPE , Film Width (Max) 1600 mm 3 extruders 50/60/50
Each screw has Plastcontrol large capacity 4-station gravimetric dosing unit
Head diameter: 300mm
High capacity cooling ring, it has heating cartridges for regulation and thickness control.
Motorized calibration basket up to 1600... | Coextrusion lines | 2010 | |
DOLCI - TX AO 150Materials LDPE , Film Width (Max) 1000 mm Minimum thickness 25 my
Maximum thickness 100 my
Rotating die head
Rewinder: single, max. diam 1000 mm
Dosing system: Fellner+Ziegler PVS 310
Corona treatment: Cason
Fixed haul off
Mixer for material
Spare part: additional used screw... | Mono extrusion lines | 1995 | |
SML - CPPMaterials CPP , Film Width (Max) 2050 mm Materials: CPP
Film Width (Max): 2050 mm
Number Of Extruders: 3
Screw Dia-A : 65
Screw Dia-B : 150
Screw Dia-C : 65
Other specs:
3 Coex Castfilm for CPP, Mono layer/Multi-layer
Gravimetric Dosing System included
Die – Cloeren Make -USA
Deckle – Y... | Cast coextrusion lines | 1998 | |
MACCHI - PlastexMaterials LDPE, LLDPE, EVOH, EVA, Metallocene Hot part with 5 extruders and 5-layer die head (EVOH) with 350 diameter and gap heating
5 extruders complete with heating zones and SIEMENS motors without drives with only FRIGOSYSTEM thermoregulation
Extruder A: diameter 80 with FRIGOSYSTEM thermore... | Coextrusion lines | 2015 | |
DMTBiaxial Material TypeBOPP , Film Width (Max) 6800 mm Thickness range : 15 – 60 µm
Film width : 6 800 mm on winder
Line Capacity : 2 450 kg/h (18 767 tpa) of co-extruded film 3 layers A – B – C
Stretching ratio: MDO (Mechanical) 1:1 – 1:8 TDO (Mechanical) 1:8 – 1:10
Slow speed section(Mechanical) 5 –... | Bi-axial film extrusion and stretching line | 2002 | |
POLYREMA - SFA 2200 SFA HSPRewinder typeSingle , Web Width max. 2200 mm SFA 2200 HSP single station surface winder equipped with:
Pre haul-off
Pre acceleration of the winding shaft
Tension control for web tension 400 N
Tension control for winding tension 400 N
Automatic cross cutting after reaching the number of met... | Winder for extruded film | 2016 | |
COLLIN - CoexMaterialsPE , Film Width (Max) 450 mm 3 Coex machine for blow film and cast laboratory testing purpose
Die Flat width: 450 mm
3 extruders, 1x 45 + 2x 30
Thinnest film can be produced approx 10 my... | Coextrusion lines | 1986 | |
CHYI YANG INDUSTRIAL - MNE-45SE Materials HDPE , Film Width (Max) 520 mm Screw L/D: 28:1
Film width (Min.): 250 mm
Thickness range: 8 - 40 my
Die head: fixed
Die plate: 50 mm
IBC system: No
Air ring type: single-circuit
Thickness control system: No
Gusseting device: Yes
Haul off: fixed
Web guide: Yes
Corona treatment: Yes... | Mono extrusion lines | 2006 | |
ADTECH PROVERA - SFM 1500Layers no. 3 , Web Width 1500 mm Stretch line for the production of manual stretch film rolls with the following characteristics:
Output: 750/800 Kg/h (23 my)
Thickness range 6-70 my
MAIN LINE COMPONENTS:
Nr. 1 Extruder - 120/30 FF
Nr. 2 Extruder - 80/30 Nr.
3 Hydraulic s... | Stretch film extrusion line | 2003 | |
HENNECKE - Hennecke HK135 L/MX 12-2 Component metering unit:
Metering unit for Polyol
Metering pump type: HL NG 12
Pump drive motor
Metering unit for Isocyanate
Metering pump type: HP6
Pump drive motor: 3kW/750 1/min
Working tank
Working tank for Polyol 1,2,3
Exploitable capacity... | Foam extrusion line | 2002 | |
SANMENG - SM-EPG-90 Production line for EPE foam sheets
EPE foam tube (optional; ask for the cost)
Working hours 1200h,
Like new,
Include two changeable line for tube & sheet to one extruder L/D54,
Include all auxiliaries (special pumps, spare parts, pipes e.t.c),
To... | Foam extrusion line | 2008 | |
BRÜCKNER - BOPPBiaxial Material TypeBOPP , Film Width (Max) 6300 mm Refurbished 6.3m Bruckner BOPP line, includes Primary Slitter and recycling unit
The line had been shut-down for about 1.5 years.
BRUCKNER 6,3 M BOPP PACKAGING FILM PRODUCTION LINE SPECIFICATIONS
Start-up Year: 1998
Film Types: Plain and Coextrud... | Bi-axial film extrusion and stretching line | 1997 | |
KIEFEL - FWA 16Materials HDPE,LDPE , Film Width (Max) 1500 mm New screw installed. 2019
Motor replaced in 2012.
Thickness range LDPE: 15μm-100μm
Thickness range HDPE: 10μm-60μm
L/D ratio: 24
Fixed head diam 200mm
IBC system with flow regulator
Rotating haul off
Web Guide Fife
Hydraulic automatic screen changer... | Mono extrusion lines | 1997 | |
RAJOO - RECF-2555-1600Materials Tie layers are EVA / EVOH /Ionomers. Inner and outer layers can be LD / HDPE/ LLDPE. , Film Width (Max) 1600 mm
Output: 160~220 kg/hr. Depending on material
Thickness range: 18-160 micron. (3-15 umicron nylon / tie-layers)
5 x 55 mm diameter screw
5x 1 component volumetric Dosing unit.
Die head: 350 x 2.5 mm, Run with or without IBC
air blower motor hp of... | Coextrusion lines | 2005 | |
FIAP - REM 1012MaterialsPVC , Film Width (Max) 1450 mm PVC double bubble shrink extrusion line
Max lay-flat width first bubble : 1.150 mm
Max lay-flat width second bubble : 1.450 mm
Max line speed on the winder : 50 m/min
Extruder diameter : 100 mm
Extruder length : 25 D
Max screw speed : 40 rpm
Main mot... | Shrink extrusion line | 1996 | |
TECNOVAMaterials PP/PE , Film Width (Max) 1780 mm HOME ASSEMBLED MACHINE :
TECNOVA srl – Oleggio (PO) Italy
DANTI PAOLO ec srl – Prato (PO) Italy
ELETTROTEX ec srl – Prato (PO) Italy
PROMEC sas – Prato (PO) Italy
THE SUSSEX GAUGE (AIPEX)
EUROTHERM
The machine is divided as follows :
Automatic pel... | Shrink extrusion line | 2006 | |
ALPINE - HS 50/75/50 SMaterials HDPE , Film Width (Max) 2200 mm 3 Extruders Diameter 50/75/50 L/D 30/30/30
Coextrusion head Type TBF 16 - 32 K with IBC
Die plate 250 mm
Cooling ring HK 500
3 ultrasonic sensors for bubble diameter control
3 Gravimetric dosing units CONTREX
Corona treatment CASON
Rotating haul off... | Coextrusion lines | 2004 | |
DIING KUEN PLASTIC MACHINERY CO. LTD - TK-EBHR1700-2Materials HDPE,LDPE , Film Width (Max) 1700 mm Screws 90 and 55 mm
Layers ABA
Fixed die head 220mm
Automatic - Double Winding
Web guide
Rotating haul off
Corona treatment
Thickness from 30 to 100 my
Tower... | Coextrusion lines | 2004 | |
GAP - CoexLayers no. 3 , Web Width 2000 mm Screw Diameter/Size (mm): A=75, B=160, C=90
Output /hour (kg/hr):min:200 max:800
Machine Line Speed (m/min) min: 100 max: 550
Film Thickness Range 12-50 micron
Rewinder: 2850 mm
Max finished material width: 2000mm
Flat Die Simplas Type L13-RB-CN/2550... | Stretch film extrusion line | 2006 | |
FONG KEE IRON WORKS - TCF – 65/100/65-1800MaterialsPP CPP , Film Width (Max) 1400 mm - T-Die Size : 1800 MM Width (Make : Cloeren, USA) / Materiel P-20 special steel / 7 Heating Zone Controlled by Temp. Controller
- Max Line Speed : 150M/Minute
- Film Size : 1400 MM Max
- Ext – A Motor : 40 HP(Screw Dia – 65MM) - Output - 80KG/Hr
-... | Cast coextrusion lines | 2003 | |
KMT - KM-LD70S1400Materials LDPE, EVA and blend with HDPE , Film Width (Max) 1300 mm
New screw installed
The screw is a 3 zone screw, barrier and mixing section with maddock.
Film width: 320mm-1300mm
Thickness range: 25μm-150μm
Dosing unit: Manual: TSM gravimetric with 4 components
Heating zones: 9
Rotating die head
1mm gap
No I... | Mono extrusion lines | 2008 | |
BANDERAMaterials LDPE and blends , Film Width (Max) 18000 mm
Coex Agriculture Blow FIlm Extrusion line
Die Head is 2000mm diameter 19T (2x2 Steel)
Main extruder: 200mm
Second 90mm
16mm Up to 18m width of open flat film
Take off and single winder is 4m width
Gravimetric feeding unit with 4 components
Side gus... | Coextrusion lines | 1999 | |
WINDMÖLLER & HÖLSCHER - OPTIMEXMaterialsPE LDPE, LLDPE , Film Width (Max) 2200 mm Optimex coex 3 layers extrusion line 2200mm
3 extruders with 4 components per extruder Doteco Adroit Grade, Metering ranges: 2x 100-100%, 1x 1.0-20%, 1x0.5-10%.
Combination of the extruders 70/90/70.30D
Extruder A: 70.30D - outer layer
Extruder B: 9... | Coextrusion lines | 2018 | SOLD |
MACCHI - BD 40Materials LDPE, MDPE, HDPE , Film Width (Max) 1150 mm Tchritter suction with MAGUIRE 4 component weight dosing system
A hopper on a scale with a PlastControl weight per meter system from 2001
65mm diameter screw with a length of 30D for extrusion of LDPE and MDPE. It can also process HDPE (screw changed... | Mono extrusion lines | 2001 | SOLD |
BRÜCKNER - Mono oriented PET-G and PVCMaterialsPVC PET-G , Film Width (Max) 4200 mm Mono oriented PET-G / PVC Shrink Film Production Line
Thickness of incoming film: 50 – 440 μm
Cast film width (depending of raw material): 811 – 2.160 mm
Film thickness: 20 – 80 μm
Mechanical speed on winder: 80 m/min
Film net on winder (PVC): 1.... | Shrink extrusion line | 2021 | SOLD |
MACCHI - BO PLUS CA 3TRewinder typeSingle , Web Width max. 2000 mm Mechanical speed: 300 m/min (depends of material)
Max web width: 2000mm
Core diameter: 76mm, 78mm (approx.: 3”)
Min/max reel width: 250-2000mm
Type of materials: FLLDPEC6, FLLDPEC4, CMLLDPE (what custumer makes, plus additives)
Material thicknesses (... | Winder for extruded film | 2003 | SOLD |
REIFENHAUSER - Evolution 105F-30DMaterials LDPE, MDPE, HDPE,LLDPE and Blends
Hot Part for sale of mono extrusion line, with only 400T production. End december machine will be dismantled
Thickness range:0,020-0,2
Output or the extruder:450-500kg/h
Number of extruders:1
Number of layers:1
Dosifying batch system Plastcontrol
... | Mono extrusion lines | 2016 | SOLD |
LOHIA STARLINGER - E105B Lorex 1400MaterialsPP , Film Width (Max) 1400 mm Extruder unit;
DC drive power : 150 kW
Melt capacity PP : 450kg/hr
Barrel heating power : 24 kW
Die width : 1400mm
Die heating power : 19,8 kW
Manual screen changer
Slitter type : single station cutter
Holding unit ;
Nº of godets (normal) : 2
AC driv... | Extrusion line for tapes (woven sacs) | 2004 | SOLD |
MACCHI - Coex 5Materials LLDPE/LDPE/EVOH , Film Width (Max) 2100 mm 5 layers coex line for production of barrier film with EVOH or only PE plastic films.
Extruders: 80 mm + 55 mm + 55 mm + 55 mm + 80 mm L/D 30
Dosing unit INNOPLAST , totally 17 components (5+3+2+ 3+5) year 2014
Fixed die head 5 layers with IBC, Die... | Coextrusion lines | 2014 | SOLD |
COLINES - HANDROLLEXLayers no. 5 , Web Width 1500 mm 5 layers coextrusion cast-film for the production of max 1000 kg/h stretch film , usefull width 1500 mm for hand , machine and jumbo reels
3 loss-in weight gravimetric hoppers with automatic feeders for extruders A-B-C
Gravimetric dosing system wit... | Stretch film extrusion line | 2014 | SOLD |
TECOMMaterials LDPE-HDPE-RECYCLE-LLDPE-BIO , Film Width (Max) 1050 mm Screw diameter: 55mm
Die diameter: 150mm
Materials: LDPE-HDPE-RECYCLED-LLDPE-BIO
Minimum width: 300mm
Maximum width: 1050mm
Minimum thickness 15µ
Maximum thickness 200µ
1 oscillating haul off
1 Corona treatment
1 rewinder "back to back"
5 expanding s... | Mono extrusion lines | 1990 | SOLD |
MACCHI - Coexflex 9Materials LDPE, LLDPE, HDPE, MDPE, EVA, PP, mLLDPE, PA, , Film Width (Max) 1800 mm Film thickness 30 - 200 microns
Film width 1100-1800 mm
9 Single-screw extruders type plastex 55/30 d AC motor
9 Torque motors + digital control for plastex 55
Fixed die head 9 layers coextrusion TE710 year 2016 with IBC, Range 400/600, mounted d... | Coextrusion lines | 2009 | SOLD |
DOLCI - FCL-20/SLayers no. 5 , Web Width 2000 mm Line for automatic and manual stretch film
4 extruders :
Extruder A : 65 Ø; 100kw motor
Extruder B : 160 Ø; 400kw motor
Extruder C : 75 Ø, 150kw motor
Extruder D : 75 Ø; 150kw motor
Refeed extruder : 120 Ø; 70kw motor
Die :
Flat die type Cloeren
Fe... | Stretch film extrusion line | 2011 | SOLD |
SML - Minicast EcocompactLayers no. 5 , Web Width 1500 mm Mechanical speed max. 650 m/min
Range of film thickness for stretch wrap film 6 - 35 µm
Final film width max. 3 x 500 mm, 3 x 400 mm, 3 x 450 mm
Layer distribution for stretch wrap film B / A / D / A / C
Cooling water. Necessary cooling capacity appr... | Stretch film extrusion line | 2017 | SOLD |
JENN CHONG - JLH65AMaterials HDPE , Film Width (Max) 1100 mm Rotating LD head with die plates 120 and 150 mm
Gussets any size
Corona treater
Cartridge filter
Tension control of the film
Main motor 60 HP AC
Heaters power 22
Temperature control 7 zones
Film width 500-1200mm
Film thickness 8-80 my
Die plates 15... | Mono extrusion lines | 2008 | SOLD |
JENN CHONG - LH65AMaterials HDPE , Film Width (Max) 1100 mm Rotating HD head with die plates 120 and 150 mm
Max width 1100mm
Gussets any size
Corona treatment
Cartridge filter
Tension control of the film
Main motor 60 HP AC
Heaters power 22
Temperature control 7 zones
Film width 500-1200mm
Film thickness 8-... | Mono extrusion lines | 2007 | SOLD |
WINDMÖLLER & HÖLSCHER - VarexMaterials LDPE, LLDE,HDPE, Metallocene, EVA, EVOH , Film Width (Max) 2100 mm 5 layers coextrusion line for barrier film
Extruders: 70.30D (E)/ 50.30D (D)/ 60.30D (C)/ 50.30D (B)/ 70.30D (A)
Gravimetric dosing unit with 5 main components and 5 secundary
5 layers die head B350/500-5-P2 with IBC, dieplate installed 500 mm, gap 1... | Coextrusion lines | 2003 | SOLD |
ALPINE - MDO 20Film Width (Max) 2000 mm , Parent Roll Diameter 1000 mm General data and machine configuration
• Machine direction Left to right (from operator side)
• Machine speed 0 – 190 m/min
• Process speed 4.3 – 190 m/min
• Web width 1200 – 2000 mm in / 1000 – 1800 out
• Web position in the machine Centre
• M... | Monoaxial Oriented Line MDO | 1999 | SOLD |
SML - W110 (TF) Sheet/1800/6/70Rewinder typeTurret , Web Width max. 1750 mm SML winder for CPP/CPE/CAST-PET/barrier film
Processed materials: PP, PS, ABS
Film thickness range: 300-1500 my
Rolls width 2000 mm; useful width 1750 mm
Max reel diam 1000 mm
Winding shafts: 76 mm; 2 pneumatic winding shafts 76 mm included
Max. mech... | Winder for extruded film | 2009 | SOLD |
SML - EcocompactLayers no. 5 , Web Width 2000 mm Layer distribution for stretch wrap film A / B / C / B / D
Mechanical speed max. 650 m/min
Range of film thickness for stretch wrap film 6 - 35 µm
Final film width 4 x 500 mm
Cooling water Necessary cooling capacity approx. 647 kW (556.000 kcal/h 12/... | Stretch film extrusion line | 2014 | SOLD |
MACCHI - COEX FLEXMaterials LLDPE, LDPE,PA,METALLOCENE,EVOH , Film Width (Max) 2100 mm 5 layers 2100 mm width Blown Film Line
Speed. Max 150 m/min.
Min. 15 micron +/- 5% thickness.
Diameters: 65+45+55+45+65 mm 30:1 Extruders,
4-comp. gravimetric dosing unit on 65 mm & 55 mm Extruders, 1-component on 45 mm Extruders. PIOVAN
450 mm Di... | Coextrusion lines | 2009 | SOLD |
TECNO COATING - HI Tech Cast LineLayers no. 3 , Web Width 2000 mm Cast coex line 3 layers for LLDPE stretch film
Configuration type ABC 10%-80%-10% or 20%-60%-20%
Thickness 10-30 my
Output 500 kg/h
Max mechanical speed 600 mt/min
Electronic System measurer with Beta rays KR85
Reels diameter 120-200 mm
Number of r... | Stretch film extrusion line | 2004 | SOLD |
CMG - HTM-DW 1200Materials LDPE, HDPE, LLDPE , Film Width (Max) 1180 mm Screw length: 1600 L/D 29
Thickness range: 9-120 my
Fixed die head : diam. 250 mm
Gap : 2,35 mm
Air ring: manual
Dosing system: gravimetric
Calibration basket
Rewinder: double back to back, automatic, max. diam 700 mm
Spare parts: 9 heating zones +... | Mono extrusion lines | 1995 | SOLD |
TECOM - 65/1600 Materials LDPE , Film Width (Max) 1600 mm Scope of supply: two identical lines with a common tower 7 m in height
Manual filter changer
Single layer rotating die head
Basket 1600 mm
Fixed haul off 1600 mm
Raw material dosing system Contrex 2 components
Corona treatment
Full manufacturer doc... | Mono extrusion lines | 1997 | SOLD |
GENERAL PLASTICS - GF-40+45L/700-W2HMaterials LDPE, LLDPE , Film Width (Max) 700 mm EXTRUDERS
Screw diameters A 45mm B 40mm
L.D ratio 28:1
Number of zones (cylinder) A 3 pcs, B 3 pcs.
Cylinder cooling fans A 3x0.09, B 3x0.09
Drive motors A 15kW, B 11kW
Main fan 4kW
HEAD - double layer
Head diameter 120mm
RECEIVING UNIT
Width of ro... | Coextrusion lines | 2011 | SOLD |
FAP - AVV 17.2Rewinder typeDouble , Web Width max. 1700 mm Winder semi-automatic non stop
The machine has been working only 6 months
Max diameter : 1100 mm
Material : film, foam, air bubble film, etc
Core diameter : 76 mm (inflatable bi-axis core)
Mechanical speed : 120 m/min
Max. weight of roll : 50kg... | Winder for extruded film | 2004 | SOLD |
GHIOLDI - Back to backRewinder typeBack to back , Web Width max. 2100 mm Automatic back to back rewinder, rolls widh 2200 mm, useful width 2100 mm
5 Al uminium + 5 steel winding shafts 3"
Max reel diam 800 mm
Nominal speed 150 m/min
Delivery time within 5 months from the signature of the agreement... | Winder for extruded film | 2005 | SOLD |
DOLCI - CoexLayers no. LDPE, LLDPE 3 , Web Width 2500 mm Stretch film line for manual film
Extruders: 1x180 mm LD 26,5 , 2x90 mm LD 30 + extruder for trim recycling
Die head Edi mod. Autoflex H40C width 2950 mm, year 2002
Thickness control system Measurex, year 2002
Edge pinning device Eltex year 2011
Web... | Stretch film extrusion line | 1992 | SOLD |
IMS DELTAMATIC - K100-LU900 , Film Width (Max) 900 mm K 100 Embossing machine designed for extremely accurate embossing of sophisticate design patterns on delicate materials (alu foil 08 to 30 μm) and metalized paper.
The unit has never been used and is in original packaging after the overhaul. Comissi... | Calender | 2015 | SOLD |
GENERAL PLASTICS - GF-65/1500-W2HMaterials LDPE , Film Width (Max) 1500 mm EXTRUDER
LD ratio 28:1
Heating power 18,4 kW
Number of zones (cylinder) 4
Cylinder cooling fan 4x0.18kW
Main motor 37kW
Main fan 5.5kW
DIE HEAD
Head diameter LD220mm+insertLD 120mm
Heating power (sieve+head+rotation) 11.6
COLLECTING UNIT
Rollers wi... | Mono extrusion lines | 2010 | SOLD |
GHIOLDIMaterials LDPE, MDPE, HDPE, MLDPE , Film Width (Max) 1400 mm Thickness range: 0,018 - 0,150
Extruders 2x 60 + 2 x 55
4 dosing stations
Fixed head
Die diameter 250 mm
Gap 1,8
IBC Yes
Ring type: automatic
Thickness measuring system Inno Plast DE
Electrically adjustable gusseting device
Rotary haul of... | Coextrusion lines | 2009 | SOLD |
DOLCI - CAST 5 STR. HIGH SPEED FCL 3000Layers no. 5 , Web Width 3000 mm Materials: STRETCH FILM - LDPE
Output (Kg/h) 2000kg/h - 25µm
Number of extruders 4
Dosing system (Type and nº of components) INNOPLAST VIP5400 / 9 COMPONENTS
Screw/s Diam and L/D 180mm, 120mm, 75mm, 75mm
Die Head width 3000mm
Lip opening 3500mm
NDC V... | Stretch film extrusion line | 2008 | SOLD |
MACCHI - CH7Die Diameter 500 mm , Mono/CoexCoex
IBC AUTOMATIC DIE PLATE 7 LAYERS
Gap: 1.8mm
Air Ring: Karat
Number of Inlets:8
... | Blown film die head | 2007 | SOLD |
BIELLONI - Castello uz4560Materials Stretch , Film Width (Max) 2000 mm Diam. A 80mm
Diam. B 140mm
Diam. C 80mm
Rewinder with automatic changeover system. Two shafts.
Spare parts included.
4 cuts of 500mm / 2 cuts of 750mm and 1 of 500mm.
Automatic and Manual film on 75mm cardboard tubes.
Maximum reel: 50 kg ... | Cast coextrusion lines | 2001 | SOLD |