Used Blow Molding Machine

Accumulation Head Capacity 3 l , Number Of Heads 1 Available 2 machines (originally built in 1981 and 1989 and fully overhauled - mechanical/electronic NEW) Max. mould width 600 mm Max. mould length 950 mm Daylight opening 300 / 800 mm Max. mould depth 2 x 160 mm Clamping force 250kN · Additiona...

Nissei ASB 150 DPW injection stretch blow moulding machine The system included: - Nissei ASB 150 DPW - One complete Japan ASB mould of 20 cavity for jar 52 mm neck, 18 gr weight plus 3 extra blow moulds for different design - One jar cap mould of 28 ...

Neck wide mouth , Output 2000 U/h Sipa SFL 43/ XL WM linear blow molding machine for jars Year of manufacture: 2015 With preform hopper and unscrambler 3 cavities and can be used for a wide range of jars Hardly used, very few hours In excellent condition and available immediatel...

Injection Stretch blow moulding machine Aoki AL-250-50S The machine is almost brand new. It was produced in 2021 February and installed in 2021 July The machine includes : - AL-250-50S ISBM machine - Mitsubishi RV-3SB , 5 axes take out robot ...

Nissei ASB 150 DPW injection stretch blow moulding machine The system included: - Nissei ASB 150 DPW - One complete Japan ASB mould of 14 cavity for jar 70 mm neck, 30 gr weight plus 1 extra blow mould for different design - One jar cap mould hot run...

Injection Blow Moulding Machine NISSEI ASB 50MB V3 from 2005 Working hours: 63863 Documentation avaiable in English. Offer not include any auxiliries Offer does not include mould Machine in perfect working condition and available immediately...

Accumulation Head Capacity 1.8 l , Number Of Heads 1 Closing force: 200 kN Head capacity: 2,2 kg Cycle time: 45 s MOOG parison thickness control 400 points Deflashing unit Leak tester Convoyer belts for bottles and for flashes Included: mould for PC botlles 15/19/20 lt...

Neck 30/25 & 1810 , Output 6000 U/h Bottle size: 250ml to 2,500ml Max diameter: 110mm Max height: 350mm It's currently set for 30/25 but the interchange parts for 1810 are available and included. It includes: - Preform hopper and elevator - Chiller for cooling machine / mold: Tae Evo...

Air Pressure 42 bar , Delivery Rate 1444 m³/h ATLAS COPCO Air Compressor 2008 Type: Oil Free Reciprocating Booster Min/Max Inlet Pressure: 5.5*/ 9.7 bar Maximum Working Pressure: Up to 42 bar Performance NI/s: NI/s 401, Nm3/h 1444 Running Power KW: 90 KW at 415 V, 50 Hz, 3ph Made in Eur...

Air Pressure 42 bar , Delivery Rate 2257 m³/h ATLAS COPCO Air Compressor 2009 Type: Oil Free Reciprocating Booster Min/Max Inlet Pressure: 5.5*/ 9.7 Maximum Working Pressure: Up to 42 bar Performance NI/s: NI/s 627, Nm3/h 2257 Running Power KW: 132 KW at 415 V, 50 Hz, 3ph Made in Europe ...

Container Size (Max.) 5.8 l Stretcht Blow Molding Machine AOKI SBIII-500LL-75 Used for 5.8L PET Water/Oil Bottle Preform weight: 145g Includes: - Dryer: Wensui Integrated Dehumidifiyer Dryer Year 2020 - Chiller Wensui WSIA10 Year 2020 - Mold 4 Cavity PET Working Hou...

Nissei ASB PF8-4B V3 Working hours: 20.000 aprox since refurbishment in 2016 Refurbishment: updated to version 3 in software, preforms transfer Auxiliaries included: Piovan Dehumidifying resin dryer and support structure Machine in production ...

Container Size With Actual Configuration 5 l , Number Of Heads 1 Clamping force: 180 kN Dry cycle: 2,5 sec Power electric: 16 kW Opening course: 250 mm Max. mould dimensions:(WxLxH): 545; 2x130; 550 mm NO AUTOMATIC DEFLASHING INSTALLED Extruder: screw diameter: 80 mm Screw length: 24 L/ D Power of electric motor...

Container Size With Actual Configuration 0.5 l , Number Of Heads 1 PLC was replaced for a Siemens S7 In December 2019 and January 2020, the entire control system was migrated, replacing the PLC and touch screen; all the temperature controllers (originally controlled by PLC). The PLC program and the display are unpr...

Number Of Colours 8 , Impression Type Offset Machine has 8 colours die-head, lacquer station. Tools available, diameters 25, 30, 35, 40, 50 mm. One diameter included in the price....

Neck 28 PCO/alaska , Output 6400 U/h Sidel SBO 4 Compact blowing machine, year 2007 (with high-pressure compressor) Output: 6.400 bph (for 0,5l) / 6.200 bph (for 1,5l) It includes: - Bellis &Morcom compressor, VH9H3N (year 2008), 580 m3/h, 985 rpm, 110 kW - TEFA chiller, Platinium 370...

Neck 30/25, 29/25 , Output 7200 U/h BLOW MOLDING MACHINE SIDEL SBO 6/10 Brand: SIDEL Model: SBO 6/10 Series 1 Year: 1995 Mechanical Speed: 7200 BPH Change Part: 3025 & 2925 neck finish personalization kits Installed Power: 220KW Auxiliary Equipment: - Preform loader, hopper and Unsc...

Neck 28mm,38mm , Output 25200 U/h PET Blow Molding Machine KHS BLOMAX18 2007 Includes: -The transformer -The preform dumber -Preform unscrambler -Molds if needed They will sell all the spare parts with the machine Hours on the machine:67905 Machine is still in production til ...

Injection Blow Moulding Machine NISSEI ASB 50MB V3 from 2003 Offer not include any auxiliries Offer does not include mould Working hours: 20085. Documentation available in English. Machine in perfect working condition and available immediately...

Neck 29/25 and PCO 1881 , Output 25000 U/h Used blow moulding system SIDEL SBO 18 Series S2+ Construction year 2002 Includes Dehumidifier Hopper Feederer Control Panel Tipper Working Hours 119,466 Type of Neck 29/25 and PCO 1881 moulds not available All machine documentation av...

Aoki SBIII 250LL-50 from 2003 3 machines available Auxiliaries: dehumifyer and hopper, brand Osaka Reiken In production and possible to inspect...

, Number Of Heads 1 Accumulation Head Capacity: 5 kg (PC) Actual blown container size (L): 18,9 Mould platen sizes (mm): 600×700 Opening stroke (mm): 600 Clamping force (kN): 80 Deflashing unit: Yes Leak tester: No Included: 5 moulds for the production of PC bottles...

Accumulation Head Capacity 2 l , Number Of Heads 1 Just 2500 working hours Mould platen sizes (mm) 500x600 Opening stroke (mm) 380 - 800 Clamping force 19.6 Tn Automatic Deflashing unit NOTE: Machine can work in convergent or divergent mode This machine can blown in suction (turbine available), ...

Neck PCO 1810 , Output 6000 U/h Terekas Flex Blow 4- 2016 6,000 B/H 28m neck PCO 1810 4 cavaties Blowing 2 liter container at the moment 2 sets of molds for 1l and 2l Includes: Hopper, feedert For an extra cost- complete line with conveyoring and bottle palletizer Can be seen in...

Air Pressure 40 bar , Delivery Rate 1200 m³/h High pression compressor NEA NEUMAN & ESSER Model: 3TEV63 Year of manufacture: 2000 Air pressure: 41 bar Delivery rate: 1200 m³/h Dryer included Machine in perfect condition! Power 272Kw Air...

Neck 30/25 , Output 6800 U/h Kosme KSB 4L linear stretch-blow moulder, year 2005 4 cavities, max output: 6.800 bph Container sizes: from 0.1l to 3l Energy efficient, with a modular oven. Quick semi-automatic mould change. Air recycling: a lower-capacity compressor is sufficient....

Tube Diameter (Min) 16 mm , Tube Diameter (Max) 50 mm Header & capper for cosmetic tubes 16 positions The machine heads tubes and puts the caps. 80 tubes/min max (depending on tube size) Tooling for 50 mm diameter included...

Neck 28 Nissei ASB HSB-10 Hot Fill Stretch Blow Molding Machine Working Hours 20,817 Type of Neck 28 MM Type of Mould available 350 ML Number of cavity of blowing ...

Neck 28 28 , Output 6000 U/h Straight Line Blow Molding Machine. 80% New. Machine was built on end of 2018. Fully functional. The rotary blow molding machine is a combination of the latest German technology with our superior design and manufacturing capacity. This machine co...

Neck 28 PCO and 24 , Output 2500 U/h Stretch blow molding machine SMF HS 3000 2 cavities total production december 2021 : around 5 milions of bottles Production: 1,0lt > 2.500 bph - 2,5lt > 1700 bph machine installed and in working condition ...

Air Pressure 40 bar , Delivery Rate 594.7 m³/h Ingersoll Rand High Air Compressor Pet Star4-3300 R.P.M: 514 Disch Pr. 594.7 PSI A Includes: - High Air Dryer HIROSS PHP 630 2009 Low/High Side Max.1.9 Mpag / 2.8 Mpag - Air receiver capacity 1.5 cubic meter/unit. 6 Units....

Number Of Colours 6 , Maximum Diameter 208 mm Kase K200 offset printing machine Max radius: 208 mm Min radius: 96 mm Max height: 140 mm Min height 89 mm Supported Volumes: 450 ml cup to 5 Lt Pail UV drying Bucket feeding loading unit...

Neck 28 BPF , Output 7200 U/h Used blow moulding machine Sidel Model: SBO 6/10 series 1 Year 1998 Neck: 28 BPF the PLC had been substitued recently Machine is stopped but it is possible to test it ...

Container Size With Actual Configuration 5 l , Number Of Heads 2 ##### 4 molds 5 L (2cavities) and 2 molds 10 L (1 cavitie) Included in the price#### Clamping force: 220 kN -Plate dimensions: 540x540 -Mold Thickness: 320-700 -Heating zones: 4+5 -Automatic Defalshing: YES -Leak tester: YES -Water cooling blowpins:...

Container Size With Actual Configuration 20 l , Number Of Heads 1 Continuous Blow Molding machine for cannisters/jerrycans Automatic deflashing Clamping force 190 kN Included in the scope of delivery: - 2 molds of 19lts for purified water - 1 mold of 20lts for purified water - Grinder Pagani with conveyor belt a...

Container Size With Actual Configuration 0.125 l , Number Of Heads 1 Extrusion blow molding machine Magic MG 100D Clamping force 10 kN Max mold dimensions: 145 x 2x45 x140 mm Dry cycle 0,8 s Automatic deflashing Average consumption 12 kW...

The complete line for filling all kinds of chemical products from 10 to 250 ml. The line has been used to fill the product for cleaning/parfuming toilets. Consists of: Mewes RF10/250- dosing and filling Mewes RLV 4-D- vibrator for caps that automatic...

ASSEMBLING LINE FOR EYE LASH MASK - LIP GLOSS products The assembly line was originally designed and executed for manufacturing the Bourjois Lip Gloss, but thanks to its flexibility with a few simple modifications can be re-used for other lip gloss...

Container Size (Max.) 7 l , Output 500 U/h Nissei ASB 70 DPH v2 complete system from 2005 With Piovan dryer Molds available for 63mm and ROPP Machine in production...

Container Size With Actual Configuration 20 l , Number Of Heads 1 Mould platen sizes (mm) 600X515 Opening stroke (mm) 700 Deflashing unit YES Leak Tester NO...

Neck 43 , Output 1200 U/h AMSLER WAE L22 blow molder 2 cavities 1.100-1.200 bph Filling 1 ltrs pet bottles Includes Automatic preform loader but no dumper Available Feb - March 2022...

Container Size With Actual Configuration 1.5 l , Number Of Heads 1 Clamping force 30 KN Coex 2 = extruder 50/24 mm & 25/20 mm Automatic deflashing unit Leak tester NO Average consumption 12 kW NOTE: The electronic part was rebuilt with Siemens PLC and touch control panel. The thickness variation with its hydraulic...

Container Size With Actual Configuration 2 l , Number Of Heads 2 Mould platen sizes: 400x400 mm Opening stroke: 500 mm Clamping force: 10 ton Main extruder 120 mm diameter View strip extruder 80 mm Wall thickness control Automatic deflashing Leak tester Conveyors for material transport Grinder Average consumpti...

Container Size With Actual Configuration 20 l , Number Of Heads 1 Mould platen sizes: 600X600 mm Opening stroke: 800 mm Clamping force: 10 ton Main extruder 120 mm diameter View strip extruder 50 mm Wall thickness control Automatic deflashing Leak tester Conveyors for material transport Grinder Average consumpti...

Complete EBM factory with following machines 1-AUTOMA AT10D - 2002 2- JWELL - BM 30D - 2020 3- AUTOMA APEX AT 500 M - 2008 4- JWELL - BM 30D - 2020 5- JWELL BM 5D - 2021 6 - JWELL BM 5D - 2020 7- TaizhouPET machine SG -2020 8- Arburg 420C Golden - 2...

Container Size With Actual Configuration 30 l , Number Of Heads 1 Mould platen sizes (mm 715 x757 Opening stroke (mm) 1090 Clamping force 38 Deflashing unit YES...

Container Size With Actual Configuration 0.0002 l , Number Of Heads 2 Extrusion Blow molder Battenfeld-Fischer VK 1-1.02 Year 1990 Motor power : 28 kW Heating power: 14 kW Two-head Center distance 100 mm Hot knife Deflashing unit Extraction gripper MOOG parison thickness control 25 points Siemens PLC Simatic S5 New ...

, Number Of Heads 1 Mould platen sizes (mm) 530x550 Opening stroke (mm) 490 - 790 Clamping force (KN) 20 Tn Automatic Deflashing unit...

Accumulation Head Capacity 5.7 l , Number Of Heads 1 Accum. Head capacity (L/Kg) 4.3kg Mould platen sizes (mm) 900 x1200 Opening stroke (mm) 560-1400 Clamping force (KN) 70Tn Output capacity 250kg/h HDPE Automatic Deflashing unit...

Air Pressure 40 bar , Delivery Rate 390 m³/h High pressure AF CE 2B compressor, year 2004 Speed: 650 rpm Capacity: 230 cfm It includes: dryer, airtank and chiller....

Neck PCO 1881 , Output 25200 U/h Krones Contiform S14 stretch blowing machine Output: 21.000 bph for CSD, 25.200 bph for non-CSD Hours worked: 44.872 It includes: - MDK preform auto loader, from 2006 - Aicool XB 2,5 P - WT chiller, from 2014 - Air conveyor (50m) from 2006 - Belli...

Neck PCO 1881 , Output 21600 U/h Blow molder Sacmi SBF 408 - 2012 8 cavities production 21,600 b/h running with 500ml Availble in April Includes: hopper, chiller, feeder and mold ...

Neck 38 , Output 18200 U/h Sidel SBO 14 Series 2 Machine for milk and juice bottles Output: 18.200 bph Formats bottles : 1L round; 1.5L round et 2L round et 2L rectangular...

Used Nissei ASB 70 DPH V4 machine sold without auxiliaries and molds Machine has a hydraulic motor but not servo driver. 81797 running hours The machines has been dismantled in September 2021...

Container Size With Actual Configuration 1 l , Number Of Heads 2 includes: conveyors...

Container Size (Max.) 6 l Nissei ASB PF4-1B Only 3.900 running hours Auxiliaries included: Piovan DSB 520HE Dehumidifying resin dryer and hopper Moulds included for 5L square and round shape, with container handle, 90 grams In production and available inmediatly...

Container Size With Actual Configuration 0.75 l , Number Of Heads 3 Automatic deflashing...

Neck PCO 1881 , Output 7200 U/h Blower Sipa SFL 4 from 2009 Capacity : 7200 bph. Moulds not included: Working Hours :34 500 h Machine in working condition Available immediately! ...

Neck 26/22 , Output 13000 U/h Sidel SBO 10 Series 2 blow molding machine, neck 26/22 CSD, year 1999 Output: 13.000 bph It includes tipper, hopper, preform elevator, wheel, oven and electrical cabinet. Neck changed from PCO 1881 to last generation 26/22. Hours worked: 55.000....

Neck 26/22 , Output 13000 U/h Sidel SBO10 Series 2 blower, neck 26/22 CSD, year 1999 Output: 13.000 bph It includes tipper, hopper, preform elevator, wheel, oven and electrical cabinet. Neck changed from PCO 1881 to last generation 26/22. Hours worked: 55.000....

Neck 26/22 , Output 20000 U/h Sidel SBO18 blow moulding machine, neck 26/22 CSD, year 1998 Output: 20.000 bph @ 500ml, 22.000 bph @ 250ml It includes tipper, hopper, preform elevator, wheel, oven and electrical cabinet. Neck changed from PCO 1881 to last generation 26/22. Hours...

Container Size With Actual Configuration 1 l , Number Of Heads 2 Deflashing unit + Exit conveyors included Average consumption 15 kW...

Container Size (Max.) 6 l Nissei ASB PF4-1B Auxiliaries included: Piovan Dehumidifying resin dryer and hopper Mould for 2 liter Snap-on 36mm bottle 70g In production and available inmediatly...

, Number Of Heads 5 ...

Number Of Colours 2 , Maximum Diameter 35 mm An RG3 is a servo-based screen printing machine for decorating plastic hollowware. Actual production speed depends on item shape and image length. Effective output (for 1-color): 3 300 pieces/hour Colour to colour registration Accurate to within ±0....

Accumulation Head Capacity 1.5 l , Number Of Heads 1 3D machine with aspiration, currently blowing automotive ducts Not possible to blow bottles/jerrycans with this machine Mould platen sizes: 900x1000 mm Opening stroke: 1400 mm Clamping force: 180 kN Cycle time 50 s PLC and screen retrofitted in 2...

Container Size With Actual Configuration 0.3 l , Number Of Heads 3 Available but not included in the machine price: grinder, conveyors, material blender, suction unit...

Number Of Colours 4 , Maximum Diameter 46 mm UV inks...

Container Size With Actual Configuration 19 l , Number Of Heads 1 Equipped with MOOG wall thickness control and accumulation head Screw diameter: 90 mm WK130 torpedo extrusion head with pre-accumulator Deflashing Unloading station and robot included This machine can produce 100 bottles per hour Optional (price on...

Container Size With Actual Configuration 0.5 l , Number Of Heads 1 Clamping force 15 KN Automatic deflashing unit Leak tester NO Average consumption 8 kW NEW Siemens logic PLC and touch control panel...

Container Size With Actual Configuration 5 l , Number Of Heads 1 Mould platen sizes: 420X420 mm Opening stroke: 650 mm Clamping force: 10 ton Main extruder 80 mm diameter View strip extruder 40 mm Wall thickness control Automatic deflashing Conveyors for material transport Grinder 1 mold included in the price (...

Container Size With Actual Configuration 4 l , Number Of Heads 3 Mould platen sizes: 810X400 mm Opening stroke: 500 mm Clamping force: 10 ton Main extruder 130 mm diameter View strip extruder 50 mm Wall thickness control Automatic deflashing Leak tester Conveyors for material transport Grinder Average consumpti...

Container Size With Actual Configuration 2 l , Number Of Heads 2 Mould platen sizes: 400x400 mm Opening stroke: 500 mm Clamping force: 10 ton Main extruder 120 mm diameter View strip extruder 80 mm Wall thickness control Automatic deflashing Leak tester Conveyors for material transport Grinder Average consumpti...

Accumulation Head Capacity 2 l , Number Of Heads 1 Mould platen sizes (mm) 500x460 Opening stroke (mm) 285 - 700 Clamping force 16 Tn Deflashing unit YES...

, Number Of Heads 2 Mould platen sizes (mm) 340x390 Opening stroke (mm) 150 - 420 Clamping force 6 Tn Deflashing unit YES...

Container Size With Actual Configuration 20 l , Number Of Heads 1 Mould platen sizes (mm) 510x600x400 Opening stroke (mm) 400 / 660 Clamping force (KN) 20 Tn Automatic Deflashing unit...

Number Of Colours 2 , Maximum Diameter 120 mm Glass and plastic printing for cylindrical, oval containers Features: Linear article transport with gripper tongs Mechanical base and side registration systems Direct and indirect screen heating for thermoplastic ceramic and organic inks UV dryers ...

Air Pressure 7.5 bar 2x compressors Compair L 45 and L 50 of 45 and 50 kw respectively 2x refrigerant dryers PCE 110 and filters HFN/ 110P 1x 900lt 16 bar tank...

Tube Diameter (Min) 16 mm , Tube Diameter (Max) 50 mm Header & Capper for cosmetic tubes 16 positions The machine heads tubes and puts top seal and puts the caps. 80 tubes/min max (depending on tube size) Tooling for 50 mm diameter included...

Filling machine manufactured by TECNODISEÑO MURCIANO, S.L., the model is DOSF. CHICLE. It does not have a manual. It is a machine for packing chewing gum, as the original product, although it currently packs solid cream. It can fill from 10 ml to 20...

Container Size (Max.) 3 l ASB PF6-2b Injection Stretch Blow Moulding Machine Machine comes with following Ancillaries: Prasad Koch Resin Dryer 200 from 2010 Prasad Koch Resin Loader 138 A with suction pump Prasad Koch Chiller Weco 20L from 2014 Bry Air Asia Dehumidifyer MDS...

Container Size With Actual Configuration 0.5 l , Number Of Heads 2 ...

Accumulation Head Capacity 150 l , Number Of Heads 1 1. 2x single screw extruder type 150/24 WT 160 kW, DC-drive in gantry desgin Screw diameter/Length 150 / 25 D Screw speed range HMPE 2-40 min-1 Output: HMPE/HDPE 25-500 kg/h Heating zones number 4+1 Heating capacity 55,8 kW 2. Accumulator head 150 ...

Container Size With Actual Configuration 1 l , Number Of Heads 4 4-fold double carriage machine, parison thickness control 30 points by MOOG Screw speed 15-65, screw power 45KW Additional option mounted IML robot. Mould platen sizes 440x400 Opening stroke 200-650 Clamping force 13 KN Deflashing unit No leak tes...

Number Of Colours 5 , Maximum Diameter 120 mm includes Orientomatic unscrambler Drying system OVEN...

Container Size With Actual Configuration 2 l , Number Of Heads 1 Clamping force 5.5 tons Opening stroke 385 mm Single head + head for view stripe + extruder for view stripe Double head + 2 heads for view stripe + extruder for view stripe; with center distance: 130 mm Including: Deflashing unit Leak tester x 2...

Accumulation Head Capacity 6.5 l , Number Of Heads 1 another similar machine available for sale Mould platen Max - min opening stroke 1500 - 300 mm Mold thickness (mini - max) 500 - 800 mm Mould dimension 850x950 mm Clamping force 22 ton Average consumption 89 kW...

Accumulation Head Capacity 3.2 l , Number Of Heads 1 another 5 similar machine available for sale Mould platen Max - min opening stroke 900- 350 mm Mold thickness (mini - max) 350 - 450 mm Mould dimension 700x800 mm Clamping force 21 ton Average consumption 94,6 kW...

Container Size With Actual Configuration 20 l , Number Of Heads 1 Clamping force 200 kN Closing stroke for mould: 2 x 250 mm Die diameters: 140, 170, 190 mm Max mould dimensions: 700 x 600 x (2x300) mm Extraction grip Bottom blowing...

Complete NISSEI System ASB 650 NH from 1992 Working Hours: 69812 Offer includes: Compressor TANABE VL-HH-114 with some spare Valves Drier: REIKEN PRD – 650 2 x Oil Chillers Blow and Injection Mold chillers : NISSEI DC-15 –W Oil h...

Container Size With Actual Configuration 0.5 l , Number Of Heads 2 Opening stroke 140 mm Clamping force 38 kN Deflashing unit...

Container Size With Actual Configuration 1 l , Number Of Heads 1 Good maintenance. Improvements made in recent years: - Change of monitor. - Replacement of battery to PLC. - System of extraction and orderly delivery of containers by extraction gripper and conveyor belt. - Leak tester integrated inside the machine...

Tube Diameter (Min) 16 mm , Tube Diameter (Max) 50 mm Header/Capper for cosmetic tubes Tooling included 40mm - push on Hours worked 33938 (July 2022)...

Container Size With Actual Configuration 5 l , Number Of Heads 1 Wall thickness control Deflashing unit Leak tester No ancillaries included...

Air Pressure 44 bar , Delivery Rate 1530 m³/h Used piston compressor L5-A 40 bar compressor Includes receiver tank and drier Hankison Used very little and in excellent condition. Can be seen running....

Container Size With Actual Configuration 0.1 l , Number Of Heads 1 Mould platen sizes (mm) 140 x 100 Opening stroke 70 mm Clamping force 10 kN No deflasing unit Wall Thickness control to be overhauled...

Neck 38 , Output 10500 U/h Serac blow molding machine- SBL SL7/8 - 2020 Neck 38 7 cavities Output 10.500 u/h Still installed and can be seen with material. In excellent condition and used for trials only...

Accumulation Head Capacity 2 l , Number Of Heads 1 Max. blown weight 1,5 kg Platen size 700x800 mm Opening strok 450x2 mm Clamping force 220 kN Deflashing unit NO Leak Tester NO Installed power (kW)140 Average consumption (kW)132.4 Machine dimensions (LxWxH) 8114x4635x5180 mm CE certified YES Ma...

Accumulation Head Capacity 10 l , Number Of Heads 1 Wall thickness control: Moog 25 points Mould platen sizes: 700x800 mm Mould height: 345-945 mm Opening stroke: 600-1300 mm...

Used injection moulding machine for PET bottles Nissei ASB 70 DPH V3 Year: 2004 Working hours: 24.300 Dust extraction: Dega Chiller: MTA Air Booster: Blitz machine in working condition ...

Air Pressure 13 bar , Delivery Rate 525.6 m³/h Oil-free screw compressor with water injection A second identical machine available for sale, year 2016 (price on demand)...

Accumulation Head Capacity 5.3 l , Number Of Heads 1 Included moulds of lt 5, lt 10, lt 25 all stackable including dies and nozzles Mould platen size H 92cm x W 74 cm...

Air Pressure 40 bar , Delivery Rate 580 m³/h Bellis & Morcom VH9H3N, year 2000 Max speed: 1.040 rpm It includes: dryer, airtank and chiller. It does not include cooling tower....

Neck 30/25 , Output 4320 U/h Side TMS 2004e stretch blowing machine Bottle size: 250ml - 2.500ml Max diam: 110mm Max height: 350mm It includes: - Preform hopper - Elevator - Chiller for cooling machine / mold...

Air Pressure 8 bar , Delivery Rate 337 m³/h Output 5620 l/min Power 30 kW Rated speed 1500 1/min...

Container Size With Actual Configuration 1 l , Number Of Heads 3 Rocheleau R4 Reciprocating Extrusion Blow Molder 3-head, single station Reciprocating extruder Bi-metallic barrel • Hydraulic motor screw drive, variable (0-175 RPM) • 70 lbs/hr (32 kg) HDPE output • 200 grams maximum shot size, HDPE 25 HP motor p...

Neck PCO 1810 , 30/25 , 29/21 , PCO 1881 , Output 1000 U/h Sidel one cavity blower Model SBO 1 Neck: PCO 1810 , 30/25 , 29/21 , PCO 1881 Number of cavities per blow mold : 1 Number of blow moulds : 1 Total number of cavities : 1 Production range of bottles from 0.3lt. up to 2.5 lt. Working hours 88000 h...

Container Size (Max.) 6 l , Output 500 U/h Used Nissei ASB PF3-1BH V2 NO Molds available Dryer and plastic dehumidifier - Plastic System included Working hours 116.000 Machine in working condition Maximum volume of the bottle is 6liters ...

Container Size (Max.) 0.29 l , Output 10000 U/h SIPA Blow moulder type ECS 10000 construction year 1997 Molds - 2 (10 cavity blowing mold for 250ml CSD) ; 2 (10 cavity blowing mold to 290ml water) Neck 28 mm type 1810 The machine includes Injection Blow molding machine Resin Dryer Resin Hopper...

Container Size With Actual Configuration 6 l , Number Of Heads 1 dimensions mould platen: H 440 mm L 320 mm...

Neck PCO 1810 , Output 6000 U/h Sidel SBO6 Series 2 blow molding machine for PET bottles Output: 6000 b/h, Neck: PCO 1810, with quick change for 38mm type bericap format Working hours: 40.000 Includes: - Caterpillar Oven - Preforms elevator and positioner - Full documentatio...

Neck Eco 3 , Output 30000 U/h Krones Contiform S20 20 blowing stations Neck Eco 3 PLC /AB drive control panel I-Panel HMI linear oven Includes: Preform Roller Orientor System and AG Hydraulic Preform Tipper Includes 8 sets of molds - 200ml-5L...

Number Of Colours 5 , Maximum Diameter 250 mm Screen printing machine 5 colours + UV for cylindrical, elliptical and flat containers + automatic loader Min-max diam. on cylindrical containers: 20 - 120 mm Min-max radius on elliptical containers: 25 - 250 mm Max. printing length: 400 mm Max. pri...

Used Nissei ASB 70 DPH V4 machine sold without auxiliaries and molds Machine has a hydraulic motor but not servo driver. 69189 running hours The machines has been dismantled in september 2021 ...

Container Size With Actual Configuration 5 l , Number Of Heads 1 Clamping force 12 ton Automatic Deflashing unit All electric parison control (Siemens) and also new extruder AC motor and new inverter Dosing unit not included...

Air Pressure 8 bar , Delivery Rate 1500 m³/h Engine power: 185 kW Fan power: 27 kW Approximate working hours: 16775 hours Production capacity: 1500 m3/hour Air-cooled....

Liquid cream packaging machine. The brand name does not appear, as it was a machine manufactured specifically with the characteristics requested for this article, but the company that built it is MECAQUÍMICA DE LEVANTE, S.L., it was built in 1992. It...

Number Of Colours 1 , Impression Type Hotstamping Hot Stamping printer automatic with feeder, hot gilding. Fully automatic machine designed for round gilding on cylindrical and oval shaped objects. Possibility of printing on irregularly shaped objects. Suitable for bottles, mascaras, lip gloss, cra...

Container Size With Actual Configuration 2 l , Number Of Heads 1 6 layer coextrusion blow moulding machine Screws diameters: 60 mm; 35 mm; 60 mm; 35 mm Single coextrusion head 6 layer (year 2010) Head for view stripe Extruder for view stripe Mould platen sizes: 290 mm x 380 mm Opening stroke: 385 mm Clamping force...

Number Of Colours 6 , Maximum Diameter 100 mm Kammann 6-colour bottle printing machine ( 5+1 if the camera is installed then 5, without camera 6) Prints round, square and oval bottles Pretreatment: propane Feeding unit Vision control system: DeCo System Spectro-L Year of built: 2017 Equipped...

Container Size (Max.) 0.125 l Number of injection cavities:12 Number of injection molds: 4 Total number of cavities: 48 Injection Mold Pitch: 76mm Number of cavities per blow mold:12 Number of blow molds: 2 Blow mold pitch: 130 mm Machines included: SIPA ECS FX 20/48 IMD Visi...

Number Of Colours 5 , Impression Type Silk-screen SILK SCREEN PRINTING MACHINES FOR TUBES UP TO 5 COLORS Machine from 1998 - Fully refurbished in 2017 - In production 8.000 hours since refurbishment Available in May 2022 Printing length 190 mm IIt can produce at a cadence of 65 pieces per minute ...

Air Pressure 40 bar , Delivery Rate 594.7 m³/h Ingersoll Rand High Air Compressor Pet Star4-3300 R.P.M: 514 Disch Pr. 594.7 PSI A Includes: - High Air Dryer HIROSS PHP 630 2005 Low/High Side Max.1.9 Mpag / 2.8 Mpag - Air receiver capacity 1.5 cubic meter/unit. 6 Units. ...

Accumulation Head Capacity 3.2 l , Number Of Heads 1 Mould platen Max - min opening stroke 1000 - 300 mm Mold thickness (mini - max) 300 - 500 mm Mould dimension 700x700 mm Clamping force 9.4 ton Average consumption 76.8 kW...

Container Size With Actual Configuration 7 l , Number Of Heads 1 Mould platen sizes (mm) 360x420 Opening stroke(mm) 620 Clamping force (KN) 139...

Neck PCO 1881 , Output 7200 U/h Used Sipa Linear blow moulding machine Model SIPA SFL4 The machine also includes chiller. Format used on this machine 0,33 to 0,7l 1881 neck products. It doesn’t includes the moulds. The machine will be in working condition till June the machin...

Container Size With Actual Configuration 3 l , Number Of Heads 1 Mould platen sizes (mm) 300x360 Opening stroke (mm) 400 Deflashing YES...

Container Size With Actual Configuration 1 l , Number Of Heads 4 Mould platen sizes 440x400 mm Opening stroke 200-650 mm Clamping force 13 kN Deflashing unit No leak tester Average consumption 60kW...

Container Size With Actual Configuration 10 l , Number Of Heads 1 double head CD 150 mm new (included in the price) No ancillaries...

Container Size (Max.) 3 l Nissei ASB PB 80/110 16/4 injection stretch blow molding machine, year 2007 (2x available) It includes: - Resin dryer APD 200N - Mould dehumidifier AMD 300 - Material loading system - Mould temperature controller - AIS container inline leak detec...

Number Of Colours 2 , Maximum Diameter 46 mm UV inks...

Container Size With Actual Configuration 4 l , Number Of Heads 2 Completely overhauled in 2014, complete maintenance done in April 2022 Undergone complete reconstruction,with new software, new hardware, new plumbing, new electrics and new arm. Double head and double station with two different moog Opening stroke ...

Container Size With Actual Configuration 2 l , Number Of Heads 4 Coex 3 layers Techne 15000/s 3 extruders with screws: 50/70/50 mm Output per extruder: 52/105/52 kg/h Die with 4 exits Blown container size : Between 500 cm3 – 6000 cm3 Opening stroke 585 mm Clamping force 180 kN No automatic deflashing Average ...

Accumulation Head Capacity 3 l , Number Of Heads 1 Platen size WxH 850x850 Space between platen Min-350 Max-1050 Clamping Force 280kN Die Pin Diameter 60 - 160 Product size 350 x 560...

Accumulation Head Capacity 6 l , Number Of Heads 1 Platen size WxH 950X950 Min-Max space between platen 400-1200 Clamping Force kN 430 Die Pin Diameter 70-270 Product size 400X700...

Container Size (Max.) 1 l Injectin stretch PET blow molder Automa NSB 20 Year: 2000 Working hours 40.000 approx Cavities 4 Preform 43g with neck 28mm Volume 1lt Pitch 110mm Hopper Moretto DP 304 HC Dehumifier Moretto Mold Chiller: Frigel RC 6...

Product Description 5 series of molds for sipa sfr 8 , Number Of Cavities 8 Used molds for Sipa SFR 8 with 38mm neck 1. format 0,33 from 2005 2. format 0,50 from 2013 3. format 1,50 from 2013 4. format 1,50 from 2015 5. format 0,40 from 2017 6. format 1,00 from 2008...

Container Size With Actual Configuration 0.5 l , Number Of Heads 2 Angle neck...

Air Pressure 39.9895922994 bar CompAir High Pressure Air Compressor 5280 D Air and Gas Compressor Hrs run : 19,534 Hrs They are offering with it an idetical one that has been canabalized for spare parts. ...

Container Size With Actual Configuration 2 l , Number Of Heads 1 Clamping Force 125 KN Deflashing unit YES Leak tester NO...

Neck 38mm , Output 10000 U/h PET blow molding machine Sidel SBO8-series2 Formats: 0,5, 1l, 1,5l and 2l bottles Neck 38mm Preform feeding system Working hours (May 2018): 50.000 No molds and compressor included....

Air Pressure 75 bar Input shaft power 173 kw Motor speed 2955...

Number Of Colours 3 , Impression Type Offset MOSS MO3000-12: 3 colors automatic offset machine for printing on cylindrical and conical containers With UV drying unit for lacquering Output: 1200-6000 pcs/h according to machine equipment Moss MP12: 12-station rotating turret with indexing mov...

Neck Wide Mouth 120 , Output 400 U/h Wide mouth blow molding machine. Cav: 1 Neck: up to 130mm. Current feetings: 120mm Capacity: up to 12L. Output: 400bph Feeding: Conveyor Working hours: Less than 1.000hours (used for tests) For protein pots or similar Blow molds available: 4, 6, 8...

1x MOULDS 2 cavities for 10 LT Stackable Jerrycan 10 Lt jerrycan weight 420 gr - N°1 moulds 2 cav. CD=320 mm Made in steel with shell cooling system Mould Dimesions Length 690mm, Heigth 525mm, Total thickness 230+230=460mm Mouvement...

Container Size With Actual Configuration 0.3 l , Number Of Heads 2 Extrusion Blow molder Battenfeld-Fischer VK 1-1.01 Year 1990 Motor power : 37 kW Heating power: 28 kW Two-head Center distance 100 mm Hot knife Deflashing unit MOOG parison thickness control 25 points...

double exit head PLASTIBLOW - Center distance 150 mm...

Neck PCO 1881 , Output 4400 U/h Blowing machine Sidel SBO 4/4 from 1995 Output 4400 b/h PCO 1881 Bottle size 0,25-2L The offer is included: loading hopper, preform feed conveyor, orientator, mold cooler, chiller The machine is still in production and available immediately....

Number Of Colours 9 , Maximum Diameter 250 mm Offset pail printer 9 colors Product Angle 10° Main Engine 7kW Total Power35 kW Air Pressure 6 bar Pneumatic Discharge Rotary table UV Drying UV Laquering Station Automatic Feeding (Inot working correctly) 9 Colour Heads+Laquer Unit 8 mandrels A...

- OMSO-M3 main machine Servo driven round operating labelling machine 12 mandrel setup (set of 12 mandrels for 50mm tubes incl.) 120 pcs/min max. (depending on product parameters) Vacuum pusher Deionizing Corona treatment 2 Plasma surface treatment u...

Number Of Colours 9 , Maximum Diameter 175 mm Offset pail printer 9 colors Max radius: 175 mm Min radius: 75 mm Max height: 120 mm Min height 30 mm Supported Volumes: 250 ml cup to 3,4 Lt Pail UV drying Bucket feeding loading unit...

Neck PCO , Output 5500 U/h Complete system for blowing bottles Kosme KSB 4000 Machine is dismantled since some time. Needs some refurbishment....

Used automatic silicone lipstick filling line with double tank Silicone moulds: 10 cavities filling Automatic cooling tunnel Capacity: 30 pcs/min. Operators: 2 person PLC in English Video of the line in action recorded before the dismantling in 201...

Neck 33 , Output 36000 U/h Sidel SBO 18/18 Universal Reheat Stretch Blow Molder P50mm -2012 PCO 1881 28mm neck finish PET Can run up to 42mm, it has 33mm personalized parts on it now Pitch 50 Can run up to 1.5l containers at 32,500 c/h Available immediately! ...

Neck 38mm , Output 12000 U/h Used Stretch blow moulding machine Brand: SMI Model: SR12 Year: 2003 Neck: 38mm for milk and juices Production: 12.000 bph Moulds machine installed but not in working condition since december 2021...

Neck 1881 , Output 3000 U/h Sidel Synergy PET Strech blow molding machine Including: Blow molding machine 2 cavities 1 Bin 1 unscrambler 1 Electrical Cabinet 1 pair of Mold Available immediatly...

Air Pressure 40 bar , Delivery Rate 364 m³/h High pressure compressor Atlas Copco 40P15 Air Pressure : 40 bars Output capacity : 364 m3/hr Year of manufacture: 2001 Working hours : 60 000 hours Includes: - 6000h Original Atlas Copco kit - Two full valve sets No tank Renovation kit valued arou...

Container Size With Actual Configuration 5 l , Number Of Heads 1 Twin station Electrical extrusion blow molding machine Year 2005 Horizontal stroke: 500 mm Dry cycle time: 3,2 s Max cycles number: 13 per min Total weight with extruder: 11.200 kg Extruder technical data: -Screw diameter : 90 mm -Screw motor power...

Type: Extusion blow die head Manufacturer: AUTOMA Year: 2000 Available nº 2 die heads 3 exists 200 mm CD (each of them includes screen changer) nº 3 die heads 4 exits 150 mm CD (each of them includes screen changer) Listed price per Die Head...

Neck PCO 1810 , Output 14000 U/h SIDEL SBO10 Series 2, year 2003 Output: 14000 b/h Neck: PCO 1810 Includes: - Preform elevator and positioner - Full documentation It needs to be refurbished to be fully operational Refurbishment and warranty could be offered, if requested....

Container Size With Actual Configuration 5 l , Number Of Heads 1 Machine manufacturer: AKEI Model: AO70SN-TS Year: 2008 Working hours: 41,229 H Output per hour : 240 BPH Product: Jerrycan 5 lt Material: HDPE Product volume min/maX: 5000 ml Auxilliaries included: NA Installed power: 59 KW Documentation/Man...

Neck PCO 1810 , Output 22000 U/h Blowmoulder SIDEL - SBO Universal 14/14 year: 2006 Capacity: 22.000 bph x 2 L Mould: 2 L Neck PCO 1810 approx 20.000 working hours Pitch of the mandrels is 43mm machine is installed but disconnected 1 year ago Complete tehnical documentation ...

Neck PCO 1810 , Output 3600 U/h NISSEI ASB BLOWER NB 40 SC Manufacturing year: 2008 Max Bottles size 4 Cavs 1.5L Type of neck 28 Capacity 3600 BPH Working hours 22,000 Includes technical documentation ...

Container Size With Actual Configuration 0.5 l , Number Of Heads 6 EBM Blow Star - Jomar 6+6 75 mm CD W. Muller head EXTRUDER diameter 90 mm Screw length L/D 25 Heating capacity Kw 21.5 Barrel zone N 4 DC motor drive Kw 70 HDPE Kg/h ~220 PP Kg/h ~190 MOLD PLATEN DIMENSIONS Width 675 mm Mold thickness min 145...

Accumulation Head Capacity 2.78 l , Number Of Heads 1 clamping force 245 KN stroke 220 x 2 Daylight min-max 310-750 mm Closing speed 350 mm/sec Platen dimensions 540x810 mm Rpm 0-85 DC motor power 50,2 kW NOTE: available a 2nd machine year 1996 (price and pictures on request)...

Neck 30/25 , Output 6000 U/h Blow molder Taiwanese brand Chum Power Model: CPSB TS4000  1) MOLDING SYSTEM          Clamping force:  48000 kg  Clamping stroke:  140 mm   Stretching stroke: 320 mm  Cavity pitch:  114.3 mm    Number of cavity:  4     2) CONTAINER          Max....

Container Size With Actual Configuration 0.3 l , Number Of Heads 2 Extrusion Blow molder Battenfeld-Fischer VK 1-1 Year 1989 Two-head Center distance 100 mm Hot knife Deflashing unit MOOG parison thickness control 25 points...

Container Size With Actual Configuration 3 l , Number Of Heads 2 Extrusion Blow Molding machine Plastiblow PB10-D XXL - Hybrid machine Year 2007 Extruder 100/25: Screw diameter: 100 mm L / D: 25 Motor power: 72 kW Heating power: 20.4 kW Heating zones: 5 Cooling Fans: 5 Screw plasticizing capacity with PE: 220 k...

Neck 48mm , Output 1600 U/h Blow moulder Siapi EA2S/5 from year 2011 5 Cavities Volume of the bottle from 2lt to 20lt Mould included: 3 and 5lt Mold Pitch: 400mm Maximum bottle diameter: 320mm Maximum bottle height: 565mm Maximum neck diameter: 75mm Maximum Nominal output...

Clamping Force 37 ton , Number Of Cavities 6 UNILOY IBS 45-3S in perfect condition and available immediately! Ideal for cosmetic and pharmaceutical purposes!...

Container Size (Max.) 0.12 l , Output 1680 U/h Aoki SBIII 250-50 - 1993 Been refubished recently The machine came with a complete mold set for a 120ML Pharmaceutical bottle. Includes: Shini Hopper and Dryer 15.85 cycle time 7 Cavities...

Neck 1881 , Output 4000 U/h KOSME KSB4000 from 2002. Capacity : 4000 bph. Neck 28 mm PCO 1881 For bottles 0.33-1.5L The offer includes bunker and preform orientator. Machine is available and can be inspected immediately....

Number Of Colours 1 Automatic silk screen printing machine 1 colour DUBUIT 245 with dryer...

Container Size With Actual Configuration 1.5 l , Number Of Heads 2 Mould platen sizes: 375 x 250 mm Opening stroke: 340 mm Clamping force: 50 kN Wall thickness control: 20 points Deflashing unit...

Neck 33mm , Output 2000 U/h SIDEL SBO 2 F – from 1998 Neck- 33mm Hours: 2938-52 Size: bottle 48 and 60oz Does not include molds nor auxiliars Can not be seen working. Includes complete set of spare parts...

Neck PCO 1873 , Output 19000 U/h Blow molding machine Krones Contiform S-10 from 2003 Dismantled, in very good condition and available immediately! ...

Neck 30/25 , Output 2000 U/h Blow molder Kosme KSB 2000 Neck configuration is 30/25 with neck change for PCO working hours: 15786 h machine in working condition ...

Container Size With Actual Configuration 2 l , Number Of Heads 1 ...

Neck PCO 1873 , Output 20400 U/h Blow molding machine Krones Contiform S-12 from 2005 • The oven has 11 lamp stations that in turn each control 9 lamps for distribution depending on the blowing format in which it works. • The opening and closing of the lock is by means of cams, it ...

Neck PCO 1810 , Output 16000 U/h Blowing machine SIPA SFR8 from 2005 Capacity 16000 b/h Bottle size 0,25L...3L Molds 0,5L and 1L are included Chiller is included Neck type PCO 1810, 28mm The machine is dismantled and avilable immediately....

Neck 45 , Output 2000 U/h BLOWMOULDER SIDE BARCELONA Manufacturer: SIDE, Spain Year of production: 2002 Capacity: 2.000 bph x 6,0 l PET Mould:6 and 8,5 l with 2 cavities Machine with hopper working hours 15.000 The machine is configure to produce 6 and 8.5 lt bottles. nec...

Container Size (Max.) 2 l , Output 940 U/h Injection stretch blow molding machine Brand: AUTOMA Model: NSB20 PRODUCTION DATE 1996 Used for producing with 4 cavity molds from 0,5-1,5L and tri cavity mold up to 2 L. Neck 29/21 and PCO28 Moulds and extra price 4 cavity speed up to 940 bph Wi...

Neck PCO 1881 , Output 9600 U/h - Blow molder Sidel SBO 6 Series 2+ - Year 2005 - Machine stopped in 2021 - Production: 9.600 bph with format 1.5lt - Caterpillar Oven ...

Neck 1810 , Output 7200 U/h KHS Blomax 6 - 1998 Neck is 1810 120 bpm for 500 ml Included: -Tipper -unscrambler -pform track - mold chiller -molds for 500ml and 1.5l...

Number Of Colours 3 , Maximum Diameter 120 mm 2x UV lamps (mercury)...

Air Pressure 42 bar High pression compressor SIAD Model: Tempo 950 Year of manufacture: 2004 but it was completly renovated in 2020. Working hours aprox. Max. air pressure: 42 bar Delivery rate: 950 m³/h Rotation per minute 1185 Tank ...

Container Size With Actual Configuration 5 l , Number Of Heads 1 Mould platen sizes (mm) 270X370 Opening stroke (mm) 320 Automatic deflashing unit FULLY OVERHAULED: New electrical panel with programmable automaton. New pneumatics of first brands (Festo and Neumax). Hydraulics revised and new hoses. Adjustable hea...

Tube Diameter (Min) 16 mm , Tube Diameter (Max) 50 mm Extrusion Line for Cosmetic Tubes -Extruder EMS 55 - 40kW (with gearbox TY Gear, model TEX-2P140) -Cooling tank EPVT 302 -Haul-off ETCF 121615 It is a single layer machine. Machine in working condition Complete tooling for tubes Ø16 – 50 mm OPTIO...

Neck 26/22 , Output 24000 U/h SIPA 16 Cavity PET Reheat Stretch Blow Molder, model SFR 16, year 2004 Output: 400 bpm (at 91% efficiency) Format: 500 ml PET water bottles Preforms: 8.5 gram preforms with 26/22 mm neck finish Includes: - chilling unit - preform dumper - feeder &...

Container Size With Actual Configuration 10 l , Number Of Heads 1 Twin-station extrusion blow molding machine with view stripe Year 2006 80 mm Blowmoulding machine Screw diameter: 80 mm L/D : 25 Screw revolution max: 60 Rew/min Motor power: 30 Kw Heating power: 3 x 7 Kw Cooling fan : 0,4 Kw Extruder output: 110kg/...

Neck PCO 1881 , Output 7000 U/h Stretch blowing machine SB 8010 model LB 4* 3 YoM 2006 Capacity 7000 b/h PCO 1881 The machine is dismantled, can be inspected in dry cycle and available immediately. Video is also available....

Neck 28mm and 38mm , Output 2500 U/h Blow moulding machine Siapi EASP 20/200 Capacity: 2.500 bph x 2 l No tools offered Complete machine - switched off 3 years ago Compressor Tempo Tehnika 350, 2004 (made in Serbia) Speed: 1100 rpm, Power: 75 kW, Pressure: 42 bar Air dryer: Boge du...

Neck PCO 1881 , Output 6000 U/h Used blow moulder Krones Contiform 6 from 2001, first generation Neck: PCO 1881 It includes: - Hopper - Elevator - Uncramble - Feeder - Mould chiller KLB S45 machine in working condition till September 2022...

Container Size With Actual Configuration 1 l , Number Of Heads 2 ...

Air Pressure 40 bar , Delivery Rate 690 m³/h Ingersoll Rand IR AIR COMPRESSOR PET STAR 210-3 - year 2000 Includes: 1)HP-300 Ingersoll Rand DRYER: -Compressed Air Dryer, Desiccant, ISO Class 2, 300 CFM, Dew Point (Deg. F) -40, For Air Comp. HP 75hp, 115 Voltage, 4.0 A Full Load Amps, 60 Hz, 1 P...

Neck PCO 1810 + 29/21 Oil , Output 7000 U/h Used Siapi blower EAS 50.115/7 Two neck formats: PCO 1810 and 29/21 Oil Maximum diameter of the bottle: 106mm Maximum height of the bottle: 350 Air flow: 650 Nm3/h machine dismantled and stored in a container. machine has been dismantled in Janua...

Neck PCO 28 , Output 3500 U/h Blow molder- Pet Technologies APF 3002- 2018 2 cavities with 4 heaint bank- Linear Includes air-recovery and VPNaccess set up for PCO 28 finish Includes: - 6 different drinkwared product molds -MCE Conveyor system -MC MOLDS Spin trimmer -ful...

Clamping Force 56 ton , Number Of Cavities 10 Injection Blow Molding unit Uniloy IBS 70-3S Injection mold clamping force: 56 Ton Blowing mold clamping force: 14 Ton Screw diameter: 45 mm L/D: 26 Max rpm 215 4 heating zones cylinder, 10 kW Max. shot: 340 g Max.output: 22,4 kg/h Max. mold-hold...

Injection Blow Moulding Machine NISSEI ASB 50MB V3 from 2011 Offer not include any auxiliries Offer does not include mould Working Hours: 43.155 Machine in perfect working condition and available immediately...

SBIII-100LL-20 year 2016 Auxiliaries included: - Chiller - Dehumidifying Dryer Machine in great conditions and available immediately!...

Neck 28/410 , Output 3400 U/h Terekas- FB2-3 PET Reheat  - 2020 Cavities- 1-3 Output- 3,400 bottles per hour Preferential heating Includes: -Preform dumper – Preform hopper elevator – Preform feed rails – Change parts for 24 mm 410 and 28 mm 410 neck finishes – Airveyor ta...

Neck PCO 1810 1500 , Output 20000 U/h Blow Moulding Machine Sidel SBO10 Universal 2 from 2012. Working Hours: 10534 Control Panel: Siemens S7 Offer includes Preform Hopper and loader. Molds Chiller and Compressor not included. Machine is dismantled but in perfect condi...

Container Size (Max.) 15 l Machine in excellent conditions Hours in production: 67.568 It has been maintened by Nissei a few months ago Availabe Palletizer Hergoplas in production at extra price ...

Injection Blow Moulding Machine NISSEI ASB 50MB V3 from 2008 Offer not include any auxiliries Offer does not include mould Machine in perfect working condition and available immediately...

Neck 26/22 Exalight , Output 30000 U/h Used stretch blow moulding machine Brand: Sidel Model: SBO 14 Matrix Year: 2015 Neck: 26/22 Exalight Production: 30.000 bph Working Hours: 30.000 approx the machine has been dismantled in september 2022 ...

Container Size With Actual Configuration 0.8 l , Number Of Heads 1 Clamping force 45 kN Opening stroke 140 mm Clamping size 265 L x 300 h + 2x85 mm (thickness) Average consumption 6 kW...

Container Size (Max.) 20 l , Output 60 U/h Blow molding machine for 5 galons bottles with Handle TYPE : ASB – 650 EXHS MFG Date : Oct. 2002 Running Hours : 14000 ONLY technical specification: · 20 LTR. PET Mould W...

Neck 38 , Output 15000 U/h SIDEL blowing machine SBO10 Constrution year 2003 Output 15.000 b/h Neck 38 mm For 0,5 and 1 L bottles (1,5 L bottles can be refurbished) Includes : Preform elevator and positioner Technoplan ARS approx. 140 metre air conveyors Complete cooling ...

Container Size With Actual Configuration 0.5 l , Number Of Heads 2 Deflashing unit + Leak tester...

NISSEI ASB PF8-4B Available immediately Auxiliaries included: - Molds for PCO 1810 & 500 ml bottles - Dehumidifying Dryer - Leak Tester - Conveyor - Loader 42245 Running Hours ...

Tube Diameter (Min) 13.5 mm , Tube Diameter (Max) 60 mm Header & capper for cosmetic tubes 16 positions The machine heads tubes and puts the caps. 80 tubes/min max (depending on tube size) The machine is sold as purchased without additional accessories. Tooling for 50 mm diameter included...

Air Pressure 40 bar , Delivery Rate 1320 m³/h AF Compressor High Pressure Compressor Atelier Francois Type CE 46 B Construction year 2007 Working hours: 31.295 h Last major maintenance: 29.445 h Speed: 500 rpm Free Air delivery 22 m3/m > 1320 m3/h Absorved power 215 kW Frecuency 50/60 Hz It i...

Air Pressure 42 bar , Delivery Rate 2553 m³/h Máximum temperature inlet air: 40ºC Maximum Temperature refrigeration Water: 35ºC Total Power to the pack: 160/522 Presure 2nd stage: 7,6 bar Noise 82,6 dB(A) Specific D 1802 daN/m2 Complete revision Nov 2020...

Clamping Force 38 ton Available a 2nd machine JOMAR 40 as spare parts (ref. 300042360) - Price on request...

Container Size With Actual Configuration 2 l , Number Of Heads 1 leak tester Available for sale: compressor, grinder, vacuum loader (price and description on request)...

Container Size With Actual Configuration 2 l , Number Of Heads 2 Clamping force 80 kN Dyc cyle 2,0 s Max.mould dimensions (LxWXDepth): 450x 390 x 2x100 mm Daylight 220 mm Available but not included in the machine price: grinder, conveyors, material blender, suction unit, leak tester, packing unit...

Number Of Colours 3 , Maximum Diameter 120 mm automatic loading device not included...

Neck PCO 1881 , Output 10000 U/h used complete system for blowing and palletizing empty bottles - Blower: Sidel SBO 8 Series 2, neck PCO 1881, Caterpillar Oven - Year 1998 - Conveyors: Zecchetti - Sleever: Comag SLC 300 Year 2002 - Conveyors: Zecchetti - Palletizer: Tekal year 199...

Container Size With Actual Configuration 1.25 l , Number Of Heads 6 Deflashing unit, leak tester Opening daylight 450 mm...

Neck 38mm + 28 BPF , Output 8000 U/h Sidel SBO 8 S2+ HR -Caterpillar Oven -neck configuration -38mm -2leads hot fill & 38mm-2leads cold fill , 28BPF/20.60 Di -bph 8000 -Working hours around 48.000h (4000 per year) -molds not included -spare parts not included -in production mac...

Neck PCO 1881 - 1810 , Output 5000 U/h PET blow machine KOSME KSB 4L Year: 2007 Production: 6800 bph with 0,5 lt - 5000 bph with 1,5 lt working hours: 46.000 One mould included machine in working condition available immediately, seller can switch off and dismanlte it under dema...

Neck 38 , Output 1200 U/h Sidel SBO 1 series 1 refurbished in 2019 9541 hours SMPU mold carriers Large clamp Can blow upt to a gallon size botte. Includes: Hopper, Elevator, Perform unscrambler and infeed rails...

Neck 28,38 , Output 1200 U/h Sidel SBO 1 - 1996 1 cavity Includes: -·Hopper Preform hopper/elevator included -·Infeed Preform orientated and infeed rail included Neck personalization for 28mm and 38mm preforms Blowing now 16 oz and 32 oz. Includes Ingerloll-Rand T30 compr...

Container Size With Actual Configuration 2 l , Number Of Heads 1 Included: 1x single head, 1x double head 100 mm + 1x double head 120 mm Available for sale: compressor, grinder, vacuum loader (price and description on request)...

Number Of Colours 4 Includes: Bottle loader...

Tube Diameter (Min) 13.5 mm , Tube Diameter (Max) 50 mm Available 2x AISA PTH40 headers, year 2002 (requested price for machine) production rate: - round tubes up to 40 tubes/min - oval tubes up to 25 tubes/min Available tooling (price on request) D30 - M15x1,5 D35 - M15x1,5 D40 - M15x1,5 D50 - TR22 x3...

, Impression Type Hot Stamping Hot stamping CER60 machine Output: 1,300 parts per hour maximum Marking format (lenght x width) 150 x 190 mm Object dimensions: diam. 19 to 56 mm Skirt length 75 to 200 mm Cap Height max. 50 mm Max overall lenght 250 mm Foil Advance: Paper advan...

Number Of Colours 1 , Impression Type Silkscreen ...

Container Size With Actual Configuration 1 l , Number Of Heads 6 Coex-2 Blow Molding Plastiblow PB10H-DXXL Year 2008 1x main Extruder 90/25 2x co-extruders, which work 3-parisons independently (2 colors can be blown at the same time) Blowing unit: Max. hollow body volume: 10.000 cc Pressure on the blowing tube...

Container Size With Actual Configuration 6 l , Number Of Heads 1 Clamping force 120 kN Dry cycle: 2,0 s Extruder motor power: 43 kW Max.mould dimensions (LxWXDepth): 450x440x (2x130) mm Daylight: 220 mm Available but not included in the machine price: grinder, conveyors, material blender, suction unit, leak tes...

Neck 38mm , Output 10000 U/h Used Stretch blow moulding machine Brand: SMI Model: SR6 Year: 2010 Neck: 38mm for milk and juices Production: 10.000 bph Moulds 1 - 0.5 lt machine installed but not in working condition since december 2021...

Container Size With Actual Configuration 1 l , Number Of Heads 1 Clamping force 40 kN Deflashing unit YES Leak Tester NO...

Container Size With Actual Configuration 1 l , Number Of Heads 1 Mould platen sizes(mm) 200x250 Opening stroke (mm) 130 Deflashing unit Yes Leak Tester Yes Average consumption 25 kW...

Container Size With Actual Configuration 0.2 l , Number Of Heads 2 Clamping 20 KN Automatic deflashing unit Leak tester NO Average consumption 10 kW...

, Output 4100 U/h Heat Resistant Blow Molding Machine Inlcudes: - Hopper - Dumper - 3 Mold Temperature controller for Body Final MATSUI AML-135 Machine available immediately!...

Container Size With Actual Configuration 0.2 l , Number Of Heads 1 Mould platen size L100 x H140 Opening stroke 60 mm Deflashing unit YES Leak Tester NO CARRIAGE STROKE 160 mm CLAMP UNIT MAX OPENING 155 mm CLAMP UNIT CLOSED 90 mm MACHINE IS FULLY ELECTRIC AND COMPLETELY REFURBISHED (original built in 1999) NEW P...

Neck 29/21 Oil , Output 4000 U/h Used SIPA SF 8/4 Preferiential Heating machine - Machine for Oval bottles - Neck 29/21 - include: hopper, loader, unscrambler and feeder machine working till the middle of november 2018...

Container Size (Max.) 15 l Machine in excellent conditions but requires investment of 15.000€ by NISSEI It has been maintened by Nissei a few months ago Hours in production: 24.096 Included Palletizer Hergoplas in production...

Container Size With Actual Configuration 1.5 l , Number Of Heads 1 Hot knife Available for sale: compressor, grinder, vacuum loader (price and description on request)...

Neck 38 - 2 Start , Output 7000 U/h Stretch Blow molding system SIDEL SBO 6 Universal HR (Hot Fill) Construcion year 2011 Strech blowing moulding machine capable of blowing ‘cold’ fill, CSD, Still, and hot-fill Bottles. Hotfill: 2 Litre Maximum. Max. output 1,800 b/h. Max. Diameter ...

Container Size With Actual Configuration 1 l , Number Of Heads 3 Available but not included in the machine price: grinder, conveyors, material blender, suction unit, leak tester, packing unit...

Container Size With Actual Configuration 2 l , Number Of Heads 2 Clamping force 80 kN Dyc cyle 2,0 s Max.mould dimensions (LxWXDepth): 450x 390 x 2x100 mm Daylight 220 mm Available but not included in the machine price: grinder, conveyors, material blender, suction unit, leak tester, packing unit...

Container Size With Actual Configuration 0.075 l , Number Of Heads 2 Deflashing unit + leak tester Opening daylight 230 mm...

Container Size With Actual Configuration 20 l , Number Of Heads 1 Mould platen sizes (mm) 460X440 Opening stroke (mm) 620 Deflashing unit YES Leak Tester NO...

Container Size With Actual Configuration 1 l , Number Of Heads 2 Mould platen sizes (mm): 300 x 350 Opening stroke (mm): 120-500 Clamping force (Kg): 4500 Deflashing unit: No Leak tester: No....

Clamping Force 38 ton ...

Container Size With Actual Configuration 4 l , Number Of Heads 1 View stripe One extra triple-head centre 100mm available New screen New servo valve for parison New parison filter Mold length: 230 mm Mold width: 340 mm Mold depth: 2x100 mm Daylight: max 200 mm Mold weight: 180 kg Clamping force 60 kN...

Container Size With Actual Configuration 10 l , Number Of Heads 1 Available but not included in the machine price: grinder, conveyors, material blender, suction unit...

Neck Alaska , Output 21000 U/h Used Sipa SFR 16 The mould series of 1.5 lit included Machine has been dismantled ...

, Output 580 U/h Injjection Blow moulding machine NISSEI ASB PF 4-1B V3 Construction year 2012 NO Molds available Line includes, dryer platform, Matsui dryer and hopper with Piovan loader Worked hours : 9.000 h Capacity 580 bottles / h Please note BPH varies de...

Container Size With Actual Configuration 5 l , Number Of Heads 2 Mould platen sizes (mm) W x H 500 X 460 Opening stroke (mm) 685 Deflashing unit YES NEW Omron PLC and screen...

Container Size With Actual Configuration 0.15 l , Number Of Heads 2 Deflashing unit + leak tester + inclinated conveyor to mill + feeder Available: Grinder (price on request)...

Container Size With Actual Configuration 0.4 l , Number Of Heads 4 mould platen size 370x400 Daylighht opening 500 mm Deflashing unit + leak tester + feeder...

Container Size With Actual Configuration 1 l , Number Of Heads 3 mould platen sizes 400x450 mm Daylight opening 475 mm Deflashing unit + Leak Tester + low conveyor for flashes + Conveyor to grinder Not included: Grinder (price on request)...

Container Size With Actual Configuration 1.5 l , Number Of Heads 1 Clamping force 110 bar Deflashing unit YES Coex 2 layers...

Neck PCO , Output 6000 U/h Blow molding machine SIPA from 2009 Type SIPA SFL 4/4, Capacity: 6000 b/h 0.5, 1.0, 1.5lt Electricity, 123 kW Maximum current 250 A. Air consumption 330 Nm3 / hour, 33 bar INCLUDED: High pressure compressor SIAD – Type TEMPO 2 450 40 bar air...

Nissei ASB 50 H Dryer: not known Hopper: not knows machine refurished in 2018 No mold available NO CE available machine stopped but possible to see running ...

Neck 28 Alaska , Output 12000 U/h Used Blow molder SMI SR 6 from year 2009 Neck: 28 Alaska 267 Novembal Production around 12.000 bph Auxiliaries included: Air recovery system Preform dumper Hopper Elevator Unscramble Feeder chiller 3 sets of molds probably available machin...

Air Pressure 10 bar Screw compressor of FIAC model V30 Airblok Rotary Screw, from 24,1 KW with capacity of 6100 liters/minute with only 768 hours of work Friulair dryers DFE 61, with the same capacity, the same hours and a power of 1.1 Kw....

Container Size With Actual Configuration 0.5 l , Number Of Heads 1 Machine was only used for tests...

Working hours: 8000 hours. It has a 32-cavity injection mold, a 13.5-gram preform, neck 30/25. The blowing mold has 16 cavities, for 0.33 liters. The previous mold is also included (also 0.33L, but for the old neck 30/25 2-input), as well as males ...

Neck 1881 , Output 25000 U/h Sidel SBO18 Series 2 With auxiliaries and 3 sets of molds Neck PCO28 1881 Available immediatly...

Container Size With Actual Configuration 0.08 l , Number Of Heads 2 Leak tester + feeder...

Container Size With Actual Configuration 0.75 l , Number Of Heads 3 Deflashing + Leak tester + low conveyor for flashes Not included: Grinder + inclinated conveyor (price on request)...

Container Size With Actual Configuration 1 l , Number Of Heads 3 Deflashing unit + leak tester Available: grinder + conveyor (price on request)...

, Number Of Heads 2 Deflashing unit + feeder...

Container Size With Actual Configuration 0.125 l , Number Of Heads 2 Deflashing + leak tester + conveyor for flashes NOT included: Grinder (Price on request)...

Container Size With Actual Configuration 0.5 l , Number Of Heads 3 Deflashing + leak tester + feeder + conveyor for flashes NOT included: grinder (Price on request)...

Container Size With Actual Configuration 0.4 l , Number Of Heads 2 Deflashing unit + feeder + exit conveyor NO Leak tester...

Neck PCO 1810 - 1881 , Output 5400 U/h SIDEL SBO 4 – Series 2 from 2000 - working hours : 6138 - neck personalization’s available: PCO 1881/1810 - max bottle size: 2000ml (2 Ltr) - quick change The line includes: ·Hopper, Elevator, Preform unscrambler, gravityfeed to Blow Molder, Blow...

Container Size With Actual Configuration 2 l , Number Of Heads 2 Opening daylight 450 mm Deflashing unit + Leak tester + feeder + conveyor to grinder Available: grinder (price on request)...

Neck PCO 1881 , Output 6000 U/h Blowing machine SIDEL SBO 6 Series 1 from 1996 Capacity 6000 b/h Neck type 1881, 28mm The machine is dismantled and available immediately...