PISKO - PC96
Pisko PC96 PET preform neck crystallizer machine, year 2014
Output: 12 000 preforms/hour
Working hours: 27000 hours
Configuration: PCO 1810 neck finish
Includes following auxiliaries:
- Preform Feeding System
- Unscrambler
- Temperature Control... | Mould and die cleaning equipment | 2014 | |
LEISTRITZ - ZSE 75 HP + MIC 27/GL 44D TECHNOPOLYMERS REINFORCED WITH GLASS FIBRE OR MINERAL FILLERS - ADDITIVES FOR PET - RECYCLED PET
* Technological equipment laboratory division
- Complete Leistritz laboratory extrusion line, replica of the industrial version, twin-screw corotatin... | Compounding extrusion lines | 2001 | |
INDUSTRIE GENERALI - CGB 130/21DScrew Diameter 130 mm , Throughput 850 kg/h Complete line for PVC compounding for 850 kg/h (Rigid PVC)
Machine has been complete overhauled and it will be provided with NEW screws and cylinder
Motor DC 98 kW
Includes: die head, cutting system, pellet cooler... | Twin-screw extruder for PVC compounds | 2004 | |
SYNCRO - Easybatch M3 Easybatch Blender Easybatch M3 designed to 3 components of good flowability
Scale installed on two load cells
Hopper divided into 4 compartments
Mixer installed on two load cells
Hopper unloading tube for one component
Control gr/meter, flow rate an... | Dosing and metering equipment | 2019 | |
JWELL - JWELL YF240 downstreamProfile Width (Max) 300 mm ... | Complete downstream lines for profiles | 2019 | |
BATTENFELD - BCE 1-60-25 D , Output Capacity 60 kg/h
Extrusion Line for PVC profiles
Output: up to 60 kg/h
included:
single-screw extruder Battenfeld 1-60-25D year 2007
Co-extruder Lider Makina LCOEX 1-25/25
calibration table: Battenfeld PA 150, year 2007, 3m
haul-off device: Battenfeld CT 2500 / V... | Extrusion line for PVC profiles | 2007 | |
ROSSI STAMP Year of production: 2003-2005... | Moulds | | |
MORETTO - XD609X Dryer XD609X ( air flow from 475 m3/h to 950 m3 /h )
Hopper OTX 4800VP
Heater HT64T180
Triphase pump 5KW V50S50
Filter FC30CPB
Container C25HT
Year: 2016
... | Air dryer | 2016 | |
HF HAYTEK - HDC 110 DUAL ARMMaximum Tube Diameter 100 mm , Minimum Diameter 50 mm Pipe material: HDPE
Pipe type: smooth
Pipe diameter: Ø50 - Ø110
Winder type: double
The coil is secured manually by a strap machine using plastic tape
Speed min/max (m/min): 15 (can be adjusted)
Number of arms: 6
A: 350/1000 mm
B: 600 mm
D: In... | Winder for flexibles tubes and profiles | 2019 | |
BAUSANO - MD66/19Profile Width (Max) 160 mm , Output Capacity 120 kg/h PVC profile extrusion line
1. Twin-screw extruder Bausano MD66/19 year 2011
2. Calibration table Bausano BPN4/2P4 year 2009 2x pumps KW 2,5 each
3. Haul-off Bausano TN15/150MB year 2009
4. Cutter Bausano TAV 160 year 2009
5. Bausano tilting table... | Extrusion line for PVC profiles | 2011 | |
TSM - Sigmabatch 2 x Stand-alone Vacuum Receivers for connection into existing Sequencer Control Unit:
Vacuum receiver consisting of:
- Large size Reservoir Hopper
1 x Pinch valve situated on bottom of Receiver
- Vacuum loading heads with integral blowback
1 x... | Dosing and metering equipment | 1999 | |
FRIUL FILIERE - R63 , Output Capacity 250 kg/h like new. Just run for trial... | Extrusion line for PVC profiles | 2017 | |
BAUSANO - TR2/146 /19-VK-MR + MD2/125D25-HK Complete PVC compounding line
Processed material: flexible recycled PVC material
Output: 400 kg/h each extruder (total +/- 800 kg/h)
Scope of delivery:
1. Mixer - Aglomerator + extruder AME-1250-SF year 2010
2. conveying screw to silo
3. Silo f... | Compounding extrusion lines | 2000 | |
BAUSANO - T0800 , Cutting Stroke (Max) 800 mm For sheets/pannels... | Saw for profiles | 2011 | |
KRAUSS MAFFEI - KMD 75-32 / KMD 53 K/PProfile Width (Max) 260 mm , Output Capacity 400 kg/h Co-extrusion line for PVC profiles
Co-extruder KMD 53 K/P, year 2013
Conical screws
Calibration table:
Cyclone units - 2
Vacuum pumps - 3
Water pump – 3 for in + 1 for out ... | Extrusion line for PVC profiles | 2011 | |
TÉCNICAS MECÁNICAS ILERDENSES S.L. - Automatic bagging machine - ILERBAG HNG Automatic horizontal FFS bagging machine from reel, net weighing and gravity dosing
ILERBAG H
FFS HORIZONTAL BAGGING MACHINE
ADVANTAGES FOR THE USER
The design of the ILERBAG-H bagging machine ensures the maximum reliability in the the packaging pr... | Automatic bagging machine | 2010 | |
NORIS PLASTIC - NPE 30/25Screw Diameter 30 mm
Three-hole nozzle
Belt nozzle
working hours: 4589
The extruder will be sold with:
- Strand head for 3 strands
- water bath incl. dryer, type K200-3000, 3,0 m, year of construction 2019. Manufacturer PT-Maschinenbau GmbH
- Strand haul-off belt
- St... | Single-screw extruder for PE/PP compounds | 2001 | |
JWELL - SJZ55/110-YF240Profile Width (Max) 240 mm Extusion line for PVC profiles
Output: up to 120 kg/h
included:
Extruder conical twin screw JWELL SJZ55 year 2019
Co-extruder Battenfeld BCE 1-30-25D (year 2010)
calibration unit JWELL YF240 year 2019
haul-off and saw device JWELL YF240 year 20... | Extrusion line for PVC profiles | 2019 | |
PLASMEC - COMBIWOOD-HC/300/1000/FV/W-PP/PEMixing Capacity 300 l , Cooling Capacity 1000 l PLASMEC "COMBIWOOD-HC/300/1000/FV/W-PP/PE"
MIXER FOR WOOD PLASTIC COMPOSITES.
TURBOMIXER “TRM-300/FV/W”
¨ MIXING VESSEL TOTAL CAPACITY: 300 Liters
¨ MIXING VESSEL USEFUL CAPACITY: 255 Liters
¨ PARTS IN CONTACT WITH PRODUCT TO BE MIXED: AISI 304 ST... | Combination mixers | 2012 | |
VOBAU - DownstreamProfile Width (Max) 300 mm Complete downstream for PVC profiles:
profile width: 300 mm
- Calibration table 6 meters
calibration width: 500 mm
number of pumps: 4
- Haul off
belt contact: 250 mm
- Saw
-Stacking table:
Includes foil laminating device... | Complete downstream lines for profiles | 1994 | |
BAUSANO-RAJOO - MD 130/30 NEVER USED - WOODPLEX RBMD 130-30 plant FOR WPC/PVC BOARD
BAUSANO MD 130/30 TWIN PARALLEL SCREW
RAJOO-BAUSANO Downstream
4 component volumetric dosing unit (Indian maker)
BAUSANO Italy twin-screw extruder MD Plus 130-30
Flat-sheet die width 132... | Complete plant for profiles | 2016 | |
BARUFFALDI - TG_TVS/300Maximum Diameter 300 mm Cutting unit under vertical and transverse base and with pneumatic carriage movement
max. profile dimensions:
Width = 532,2 mm
Height = 10,5 mm... | Saw for profiles | 2015 | |
CINCINNATI EXTRUSION - KONOS 50PProfile Width (Max) 235 mm , Output Capacity 100 kg/h ... | Extrusion line for PVC profiles | 2012 | |
AMUT - BA92Screw Diameter 92 mm , Throughput 120 kg/h Motor AC 41 kW
Working hours 43.537 (screws were replaced in 2015 with 20.000 hours)... | Twin-screw extruder for PVC | 2004 | |
CINCINNATI MILACRON - Titan 68R-Konos 50PProfile Width (Max) 240 mm , Output Capacity 250 kg/h Main EXTRUDER Cincinnati Titan 68 R
Year 2005
Conical screws
Diam 68 in use for: approx. 17.300 h
Output capacity 250 kg/h
Main drive power 60 kW
Running hours 54.330 h
Slave EXTRUDER
Konos 50P-32
Manufacturer Battenfeld-Cincinnati
Year 2012
Conica... | Extrusion line for PVC profiles | 2012 | |
BATTENFELD - miniBex 2-54cProfile Width (Max) 200 mm , Output Capacity 130 kg/h Profile width (max)
200x30mm, 180x40mm, 150x50 mm, 100x60 mm, 70x70mm ( saw capability)
CALIBRATION TABLE
Battenfeld KP125V 2/4m - 2008
Length 4100x460 mm
Pumps power (kW) 4,3KW
Includes
Battenfeld co-extruder
Type BCE 1-30-25D
Year 2007... | Extrusion line for PVC profiles | 2008 | |
WWEKOCHEM - Sat75Screw Diameter 71 mm , Throughput 1000 kg/h Production capacity: 750-1200kg/h depending on type of material
Application
Filling and modification of plastics such as PE, PP, ABS, EVA filled with
CaCO3, talc, TiO2, etc.
Production of modified rubbers and plastics (compounding), plastic alloys
s... | Twin-screw extruder for PE/PP compounds | 2021 | |
COMAC PLAST - EBC 40 HTScrew Diameter 43 mm , Throughput 200 kg/h Compounding line COMAC
Type/Model: EBC40 HT/ Ø43- 42d
Condition: only used for testing
Line composition:
- Twin screw extruder EBC40 HT
- Extrusion head/ Manual filter
- Twin screw side feeders
- Dosing gravimetric system
- Electrical equipment of... | Twin-screw extruder for PE/PP compounds | 2010 | |
PLASMEC - TRM 350/RFO 1200Mixing Capacity 350 l , Cooling Capacity 1200 l PLASMEC TURBO MIXER 350 LITRES
RFO COOLER 12OO
COMPLETE WITH PVC AND CARBONATE LOADING SILO
YEAR 1997 ... | Combination mixers | 1997 | |
AST - KES-EXT Ø100-50/14 LDScrew Diameter 50 mm , Throughput 100 kg/h
Conical extruder Ø100-Ø50
offered with control and operator panel, cooling unit. Motor 18.5kW, hot die cut and corresponding control (year 2018).
output up to approx. 100kg/h
With CE declaration of conformity and operating instructions
The machine ... | Twin-screw extruder for PE/PP compounds | 2016 | |
WIRKBAU - Trimec 62-21Screw Diameter 62 mm , Throughput 100 kg/h engine D.C. 23 kW
-the temperature zone on the cylinder-6 zone
- temperature zones in tool -4 zone
36 000 working hours... | Twin-screw extruder for PVC | 2000 | |
MEWEKA Year of production: 2008-2012
Almost new, used only for test
ONLY CALIBRATION TOOLING without table... | Die Head for profiles | | |
AMUT - BA/72 , Output Capacity 180 kg/h Twin screw extruder AMUT Year of construction 1996 for PVC profiles
Manual available
Screw diameter 72 mm
Throughput: 180/h
Application: Swimming pool 3-chamber hollow profile
Haul off & Saw
Brand: Elkuma 404/03
Year: 1975
Volt 380
kW 2.5
Amp 17
Hz... | Extrusion line for PVC profiles | 1996 | |
LEISTRITZ - ZSE 50GL - 36DScrew Diameter 50 mm , Throughput 120 kg/h Complete line for compounding LEISTRITZ ZSE 50GL
(4 component dosing system included)
Screen changer: BKG
Underwater granulator: BKG MASTER A 300 (2002)
BKG Dryer
injector
Single temperature control unit ST 150
Motor power: 54 kW... | Twin-screw extruder for PE/PP compounds | 2001 | |
FRIUL FILIERE - R63 FFProfile Width (Max) 800 mm Complete production line for expanded PVC panels (800x40mm)
brand: FRIUL FILIERE
year: 2001
1. TWIN SCREW COUNTER-ROTATING EXTRUDER
2. CALIBRATION TABLE
3. PULLER
4. AUTOMATIC SAW
5. SELF LIFTING DOOR RECEPTION PLATFORM
6. EXTRUDER (NE... | Extrusion line for profiles of other thermoplastics | 2001 | |
GREINER - GCE 30-FScrew Diameter 30 mm , Throughput 16 kg/h ... | Co-extruder | 2012 | |
AMUT - Monovite 60 , Output Capacity 60 kg/h Single screw extrusion line for RIGID PVC including:
- 1x single screw extruder AMUT 60
- Calibration table AMUT 5 meters
- Roll puller belt contact 30 cm
- Circular saw Cutting Height 100 mm... | Extrusion line for PVC profiles | 1990 | |
BUSS - 155-12DNumber Of Screws 155 , Screw Diameters 155-120 600 Rigid PVC - EVA compounding line
1. Primary extruder BUSS 155-12d with adjustable pegs (3 sets of 120° pegs)
Heating and thermostatting with diathermic oil circulation in the
Internal jackets with control unit KW 36. AC motor KW 90 with Inverter.
2... | Co-kneader extruder | | |
MAGUIRE - Ultra 600 Maguire PET Dryer
Series: Ultra Low Energy Dryer
Performance: 205 kg/h
Only used for tests
Available immediatly... | Air dryer | 2019 | |
MAGUIRE - Ultra 300
Maguire PET Dryer
Series: Ultra Low Energy Dryer
Performance: 140 kg/h
Only used for tests
Available immediatly... | Air dryer | 2020 | |
EXTRUDEX - ED 50 GLScrew Diameter 50 mm , Throughput 40 kg/h Extrudex ED 50 GL
Material: PVC
Total working hours: 46,000
2010: they changed the 33kw DC motor and replaced it with an 11kw AC motor and a frequency converter.
2016: they changed the screw and barrel (Extrudex)
With the new screw and barrel 11 000... | Single-screw extruder for PVC | 1990 | |
KRAUSS MAFFEI - KMD 90-26Screw Diameter 90 mm , Throughput 250 kg/h Output capacity: 230-250 kg/h
Main drive power: 60,4 kW
DC motor... | Twin-screw extruder for PVC | 2000 | |
BAUSANO - MD52Screw Diameter 52 mm Never used in production... | Twin-screw extruder for PVC | 2016 | |
PIOVAN - CA 3011 EITransfer MediumWater
Chiller Piovan
Model: CE 3011 EI
Year: 2005
Power: 75 Kw
Machine still installed... | Heating and cooling unit for moulds and dies | 2010 | |
ENTEK - 27-44DScrew Diameter 27 mm , Throughput 45 kg/h 27mm ENTEK twin-screw extruder.
44 L/D Extruder is in good running condition only 4940 hours of runtime
Has always been a lab machine mainly running UHMW with oil injection
Production capacity 5 – 100 lbs/hr (2.3 - 45kg/hr) depending on formulation
4... | Twin-screw extruder for PE/PP compounds | 2002 | |
MARIS - TM 85LC-37DScrew Diameter 85 mm , Throughput 450 kg/h Motor 64 kW
FEEDING FEEDER FOR MATERIAL
DEGASSING WITH VACUUM PUMP KW 4.5
EXTRUDER HAS NO SIDE FEEDER
EXTRUDER WAS USED ON CALENDERING PLANT FOR LOW DENSITY PTL PP POLYFINE MATERIALS... | Twin-screw extruder for PE/PP compounds | 1992 | |
KRAUSS MAFFEI - KV432-3 Puller with cutter KRAUSS-MAFFEI
- belt length 2500 mm
- belt width 250 mm ... | Haul off for profiles | 1984 | |
GREINER - Set of moulds PVC window frame profile moulds
- Producer – Greiner / Austria
- Calibrator – two pcs x 230 mm
- Vacuum downstream – 3 m.
- Condition – excellent... | Moulds | | |
PIOVAN - PGV - T10c - RB60-5BUConveyorBlowing 1x Vacuum conveyor Piovan:
Brand: Piovan
Model: T10c
Power: 110v 50/60Hz
with insulated hopper
1x Vacuum conveyor Piovan
Brand: Piovan
Model: F2
Power: 400v 50Hz
Installed power: 1.1kW
with hopper insulated dryer
2xVacuum conveyor Piovan
Brand: Pi... | Conveyors for resins or pellets | 2007 | |
PVTECNIC - FRT7/ WP-3D/ GL 142 M PROFILE MACHINING CENTER
POSSIBILITY TO BE SOLD SEPARATELY
1x Corner Cleaner PVtecnic(Now PROFTEQ)
Model: FRT7
With turning station and programes for welding rods cleaning.
Also works for bins up to 1.50m
1xCorner Cleaner WEGOMA:
Model: 1-3D
3 ... | Profile machining center | | |
AMUT - BA 72Screw Diameter 72 mm , Throughput 180 kg/h 1 twin-screw granulation line AMUT BA 72
TYPE CEPOV
35 KW MOTOR
WITH VIBRATORY COOLER FOR GRANULES
1 NEW ENGINE COMPLETE, DYNAMO AND COUPLING
Mixing silo included, installed upstream of the pelletizing line
... | Twin-screw extruder for PVC compounds | 2003 | |
MIXACO - SM600 - M1500 VKMixing Capacity 600 l , Cooling Capacity 1500 l Electrical cabinet (NO Control)... | Combination mixers | | |
TAKIN - TAKINProfile Width (Max) 240 mm Saw to be overhauled... | Complete downstream lines for profiles | 2000 | |
BATTENFELD - Bex 2-65-22 V4Profile Width (Max) 65 mm , Output Capacity 150 kg/h Material pvc
Calibration table:
Number of pumps 3 - vacuum, 3 -water
Pumps power 1.1 kW water; vacuum- 2 x 4 kW and 3 kW.
There is a communication problem between the extruder and the haul off, the cost of the repair is about 3k Euro (Battenfeld ... | Extrusion line for PVC profiles | 1999 | |
PLASMEC - TRM 350/RFO 1000Mixing Capacity 350 l , Cooling Capacity 1000 l Hot mixer Plasmec TRM 350 AC
Cooling tank Plasmec RFO 1500
Eletrical cabinet... | Combination mixers | 1998 | |
TRINITY - SJPD-HC30-50Profile Width (Max) 300 mm Complete downstream line for PVC profile production:
Complete downstream - TRINITY // model SJPD-HC30-50 // year 2008
Made in China unused /only trial test some days (400 working hours)
* Calibration table:
- Lenght - 8 000 mm
- Number of pump... | Complete downstream lines for profiles | 2008 | |
FRIUL FILIERE - Moulds - For shutters Tool for Rolling shuter 37 manufactured by Italian co. Campanieri. (year 2013)
Tool for Rolling shuter 38 mm and 55 mm manufactured by Italian co. Friull Filiere (year 2005 & 2007)
Tool 38 mm fill with expanded PVC (that tool need to be repar... | Moulds | 2007 | |
MORETTO - R25-052
- Type : Hopper Loader (x3)
- 24V power supply
- Power 0.011kW
They can be used with individual turbines or with centralized suction.
Available immediately, not visible in production... | Dosing and metering equipment | 2006 | |
ENGINPLAST 1 gravimetric mixer EnginPlast - has worked 100 hours only.
It was installed above an extruder.
3 components 500kg/h
The weight percentages of each material can vary between 0 and 100%.... | Dosing and metering equipment | 2012 | |
MACCHI - ES 65/30DScrew Diameter 60 mm Macchi screw
Screen changer... | Single-screw extruder for PE/PP | 1997 | |
FRIUL FILIERE - E63 BiviteScrew Diameter 60 mm , Throughput 250 kg/h ... | Twin-screw extruder for PVC | 2003 | |
CIEMME - Taglierina profiliMaximum Diameter 250 mm , Cutting Stroke (Max) 120 mm Ci.Emme saw for profiles. + Tilting, inclueded in the price.
Brand: Ci.Emme
Year: 2004
Entry Disc Diameter: 25 cm
Profile width: 12cm
-Engine Brand: Ansaldo
Three-phase asynchronous engine
Power: 220/380v - 4.5/2.6 A - 50Hz ... | Saw for profiles | 2004 | |
WEITEC - WFM 500 No. 2 Filling machines for granulates
brand WEITEK mod. WFM 500
Year 1997 ( modernized 2003 )
Production : 250 bags of 25 kg/hour each
(Price per machine)... | Automatic bagging machine | 1997 | |
FRIUL FILIERE - 45/20DScrew Diameter 45 mm Screw for rigid PVC
Motor DC Sicme 17 Kw
Electrical cabinet 4 zones... | Single-screw extruder for PVC | 1989 | |
HOME MADE - for Booth - Beach Cabin - Kiosk Offer includes:
- Profile extrusion moulds (co-extruded kit + wall profile kit)
- a whole series of metal shelving and metal baskets
- prefabricated structures made with those profiles (little house 28,8 MQ - bathing cabin + hexagonal kiosk 5 MQ)
... | Moulds | 2006 | |
CINCINNATI MILACRON - Titan 58PProfile Width (Max) 235 mm , Output Capacity 170 kg/h ... | Extrusion line for PVC profiles | 2004 | |
BANDERA - TR60/24DScrew Diameter 60 mm ... | Single-screw extruder for PVC | 1999 | |
HENSCHEL - FM 200 A Mixing Capacity 200 l , Type Of MixerHot
capacity: 200L
electric system checked.
machine was refurbished in 2020... | High speed mixers | 1988 | |
CACCIA - Mixer CP 0200AMixing Capacity 200 l , Type Of MixerHot
The control cabinets of the two machines were rebuilt in 2020, including the inverter and PLC.
electric system checked in 2022
machine was refurbished in 2020... | High speed mixers | 1987 | |
METALCHEM - 2T13/6MScrew Diameter 65 mm , Throughput 150 kg/h 1 / twin screw extruder METALCHEM 2T13 / 6M
- Screw diameter 65.0 mm
- number of heating zones on the screw 4
- width L / D Screw: 65/127
- degassing
- output: about 150 kg / h
- raw material PVC
-Hours in use 5176 hours
-State funct... | Twin-screw extruder for PVC | 1996 | |
INDUSTRIE GENERALI - CGM 80/28DScrew Diameter 80 mm , Throughput 250 kg/h ... | Single-screw extruder for PE/PP | 1998 | |
MARIS - 150 - 37DScrew Diameter 150 mm , Throughput 800 kg/h Includes: die face cutting head GAMMA MECCANICA TFD 500... | Twin-screw extruder for PE/PP compounds | 1992 | |
DEGA - Mix 350 DEGA mixing system complete with two tanks for mixing virgin plastic material and master with suction and differentiated feeding system (used only for testing) ... | Dosing and metering equipment | 2001 | |
LARIO MACHINERY - 60/25Screw Diameter 60 mm , Throughput 70 kg/h Motor DC
With PLC
Screw and cylinder regenerated... | Single-screw extruder for PVC | 1999 | |
BAIXIONG KLIMENS - SRL-Z300/1000 HorizontalMixing Capacity 300 l , Cooling Capacity 1000 l 0 working hours
Spare blades & Seabelts included
120 kg/batch
500-600 kg/H... | Combination mixers | 2021 | |
BAUSANO - MD2/66C19-AK PVC profile extrusion line.
The owner planned to produce PVC pipes on the line.
Available for an additional price:
1. Tool set for PVC pipe production.
Diameters: 18, 20, 22, 24, 26, 28, 30
PVC pipe thickness for each diameter: IS 5 mm
2. Compresso... | Extrusion line for PVC profiles | 1992 | |
BATTENFELD - LH 4500Maximum Tube Diameter 160 mm , Minimum Diameter 63 mm ... | Winder for flexibles tubes and profiles | 1983 | |
FREESIA - NV-65-SGScrew Diameter 65 mm ... | Single-screw extruder for PE/PP | 1998 | |
TRIMEC - ELT 53Screw Diameter 53 mm , Throughput 50 kg/h Working hours: 24821,23... | Twin-screw extruder for PVC | 1994 | |
BARBERAN - PUR-32 PL Barberan PUR-32-PL laminating machine with Nordson slot coater glue head
A lot of associated rollers and jigs, there is also a sturdy 6 meter feed in roller table and exit packing table (see pictures)
Ready to go on window, conservatory, fascia an... | Laminating and wrapping machines for profiles and panels | 1997 | |
BANDERA CACCIA - 140/10DScrew Diameter 140 mm , Throughput 200 kg/h Twin Screw granulating line
Scope of delivery
1. Horizontal Mixer (built in 1967)
Brand Caccia type BL 100
Capacity 1000 liters
Construction Stainless Steel
Gear reducer 7,5 Kw
Motor power 7,5 Kw
Cooling sided Interspaced
Mixer RPM 20
Unload drivi... | Twin-screw extruder for PVC compounds | | |
HOME MADE - Souliotis Bros. Dies and calibrators for cable channels.
Few operating hours.
Its look like new without any wear out .
The all tooling equipment include 10 sets for the following sizes 15X13, 20X13,20X20, 40X20,40X40,60X40, 80X40.The sets for 60X40 and 80X40 are ... | Moulds | 2004 | |
ESMOS - 63Profile Width (Max) 180 mm , Output Capacity 50 kg/h ... | Extrusion line for PVC profiles | | |
FRIUL FILIERE - DSK 52Screw Diameter 52 mm Thermoregulated screws
22 kW motor... | Twin-screw extruder for PVC | 1994 | |
XINDA - PSHJ35-40L/DScrew Diameter 35 mm , Throughput 100 kg/h Processed materials: PE, PP, PA, ABS
1x Hopper
2 x Gravimetric Dosing
(Side dosing and gravimetric dosing units with control system included)
output capacity: 40-100 kg/h
screen changer: NO
die head cutting system: NO
Granulator: NO
Conveying System:... | Twin-screw extruder for PE/PP compounds | 2012 | SOLD |
PIOVAN - QUANTUM Q12 , Metering Volume 0.0045 cm³ QUANTUM Q12 gravimetric multicomponent feeder +PREMIUM EVO
Flow rate: 120 kg/h
2 load cells... | Dosing and metering equipment | 2021 | SOLD |
BAUSANO - MD66/29 PLUSScrew Diameter 66 mm , Throughput 200 kg/h Mixing plant + Twin screw extruder counterrotating Bausano MD66 Plus for PVC compounds
- Plasmec TRM 200 liters turbo mixer and cooler RFO 500 liters (year 1980)
- Material conveying screw
- Bausano MD66 Plus twin-screw extruder year 2017 with degas... | Twin-screw extruder for PVC compounds | 2017 | SOLD |
COATEM - CE15Screw Diameter 25 mm , Throughput 15 kg/h ... | Single-screw extruder for PVC | 2011 | SOLD |
LUNARDON - ML 5 2700 x 1100 trituboMaximum Tube Diameter 50 mm , Minimum Diameter 30 mm ... | Winder for flexibles tubes and profiles | 2000 | SOLD |
GELDERLAND - EXTRUDER PME 80/35Screw Diameter 80 mm Complete set incl. water bath, screen platform granulator, double melt filter (two barrels), 2 new screws... | Single-screw extruder for PE/PP compounds | 1991 | SOLD |
PLASMEC - TPE 189-230 Brand: PLASMEC
Model: TPE 189-230
Year: 2000
Planetary Extruder with Cooling Unit
Production:1.600-2.500 kg/h
Total electric power: 560 kW
Working electric power: 450 kW
Worked Hours: 46.500 hours
Worked Material: Coated PVC
- Accessories: C... | Co-kneader extruder | 2000 | SOLD |
LUNARDON - ML/5 2700 Maximum Tube Diameter 63 mm , Minimum Diameter 20 mm DOUBLE STATION COILER ML/5 2700 FOR TRIPLE TUBE WITH 2 WHEELS IN LINE - ELECTROWELDED STEEL BASEMENT COMPLETE WITH PROTECTION NETS AND SAFETY BARRIERS
2 AC MOTORS WITH SLIDING FUNCTIONS AND COMPLETE WITH COOLING FAN
RIGHT-ANGLE GEARBOXES WITH LONG-L... | Winder for flexibles tubes and profiles | 2017 | SOLD |
CINCINNATI MILACRON - Titan 80R-APCScrew Diameter 80 mm , Throughput 400 kg/h ... | Twin-screw extruder for PVC | 1998 | SOLD |
BAUSANO - 30Screw Diameter 30 mm , Throughput 20 kg/h Bausano co-extruder 30 (oemer motor)
- output: 15-20 kg/h
- power: 3.7 kw ... | Co-extruder | 1987 | SOLD |
VOBAU - DownstreamProfile Width (Max) 240 mm ... | Complete downstream lines for profiles | 1993 | SOLD |
EXTRUDEX - 45-25Profile Width (Max) 120 mm , Output Capacity 60 kg/h Complete EXTRUNET line
18000 hours of operation only.
Extrudex extruder; 45/25 LD
Output: 60-70Kg/h
Calibration table 6m; 2 pumps
Belt puller + saw assembly
Ejection table... | Extrusion line for PVC profiles | 2011 | SOLD |