Used NILPETER FA3300 of 2001 for sale
Similar Products:
ZONTEN LRY-650
- Label flexo printing machines
Year: 2014
Number Of Colours: 6
Printing Width: 675 mm
Printing Repeat (Min): 190 mm
ROTOPRESS 3513
- Label flexo printing machines
Year: 1998
Number Of Colours: 10
Printing Width: 330.2 mm
ARSOMA EM280
- Label flexo printing machines
Year: 2006
Number Of Colours: 6
Printing Width: 280 mm
Printing Repeat (Min): 203.2 mm
BHS F-1000-9
- Label flexo printing machines
Year: 1995
Number Of Colours: 9
Printing Width: 1000 mm
Printing Repeat (Min): 350 mm
MARK ANDY 2200
- Label flexo printing machines
Year: 2001
Number Of Colours: 6
Printing Width: 254 mm
WINDMÖLLER & HÖLSCHER Miraflex AL
- 8 Colours CI Flexo Printing Machines
Year: 2014
Printing Width: 1270 mm
Web Width: 1320 mm
Printing Repeat (Max): 1130 mm
SMAG Digital Galaxie + E-Cut S330
- Label sheeter - cross cutting
Year: 2016
GALLUS TCS 250
- Letterpresses
Year: 2000
Number Of Colours: 2
Printing Width: 265 mm
Data Sheet of Used NILPETER FA3300
Ref.: 300039488
Brand: NILPETER
Year: 2001
Other Specifications:
Pneumatic fixation of the sleeve on the shaft unwinding D = 76,0mm
Automatic device for controlling the web tension
Side edge alignment system and gluing table cloth
Device for removing dust and particles of dirt from the surface
8 UV drying units type DPL-340mm (ballast power 5kW, UV lamp AC-1461).
Forced cooling water recirculation system in dryers
Water chiller cooling (3x400V, 24A)
2 Nilscreen sections. Installed above the 5th and 7th printing units
UV lamination device, including a device for unwinding a lamination material and coiling of the waste laminating material (cold section stamping foil), Installed over the 5th printing unit.
Rotary die cutting,
Video monitoring system EUROScope
Mounter MOUNT-O-MATIC TABLE-
Cylinders: Z66 = 8pcs; Z80 = 8pcs; Z88 = 8pcs; Z96 = 8pcs; Z102 = 8pcs; Z114 = 8pcs; Z120 = 8pcs. Magnetic shafts: Z66 = 1pc; Z80 = 1pcs; Z88 = 1pcs; Z96 = 1pcs; Z102 = 1 pc; Z120 = 1pc. Anilox lineatura: 200, 300, 400, 500 = total 22pcs.
Stork equipment for the manufacture of screen grids such as RotaMesh - complete, new.
Slitter rewinder ROTOFLEX VSI330 year 2001.
1. Technical data :
* Roll width max = 330mm
* Diameter of roll shaft winding = 457мм
* Roll diameter on the shaft of the unwinding = 715мм
* Maximum machine speed = 229 m / min
2. Basic configuration :
* Electric motor post.current 3l. s., 25 A, 240V
* Compressed air 4-7bar
* Adjustable web speed
* Unwinding/winding shaft : Dnar=76mm
* Zone of front control of a cloth
* Manual adjustment of web tension
* Electronic system for tracking the side edge of the web
* Digital counter: 1 unit length = 10cm
* Meter installation to start the automatic speed reduction
* Total number of work cycles counter
* Operating time counter
3. Additional device :
* Scissor type longitudinal cutting device
* Two-speed drive on winding
* Automatic web clamping/feeding device
* Horizontal table for gluing the web in the unwinding zone
* Pedal to the side of the machine for shock mode
* Standard strobe light (20kW)