Used Double-shaft film slitter-rewinders: BIMEC STM/80.2-D + SIE/10 of 2014

Data Sheet of Used BIMEC STM/80.2-D + SIE/10

Ref.: 300039753

Brand: BIMEC

Year: 2014

Other Specifications:

Dual-Spindle slitter rewinder with separate shaftless
Max mother roll weight 1500 kg
Max unwind stand side shift mm ± 75
Unwind internal diameter cardboard core mm 76 (3”) - mm 152 (6”)
Rewind internal diameter cardboard core mm 76 (3”)

Materials
OPP/BOPP 25 ÷70 μm;
PET 12÷ 60 μm;
LDPE 35 ÷120 μm,
CPP 25 ÷100 μm,
PVC 12 ÷60 μm

Machine equipment
1 - Set of unwind chucks for 76 mm. (3") I.D. core.
1 - Set of unwind chuck adaptors for 152 mm (6”) I.D. core.
1 - System for the batch roll lifting and arm movement.
1 - Unwind self-braking AC. motor combined with emergency pneumatic brake - Unwind tension control by dancer roller.
1 - Splice table on the unwinder with cutting groove at 90 degrees
1 - Overhead web path.
1 - Idle spreader roller (brush type)
1 - Razor blade slitting unit (in air, between rollers).
1 - Razor blade oscillating unit.
11 - Razor blade holders.
1 - Digital manual female knife and/or razor blade holder positioning system (by means of a pointer)
1 - Mechanical shear knife slitting unit (wrap/tangential)
11 - Set of knife holders with female knives
1 - Full set of spacers for the female knife setting
1 - Trim exhauster mod. AR4C (3 Kw) with pipes, nozzles and silencer.
- Reversible rewind motor direction.
- Programmable rewinding tension control.
- Computerised control system by an operator panel (touch screen).
2 - Pneumatically operated locking clamps in rewinding
2 - Sets of supporting arms with pneumatic cylinders for rubber covered lay-on rolls.
2 - Rubber covered lay-on rolls in width 1400 mm (30 Sh). with cork covered guide rollers.
2 - Rubber covered lay-on rolls in width 1400 mm (65 Sh).
2 - Pneumatically controlled differential rewind shafts (ball friction type) for 76 mm. I.D. core (high strength and new cardboard, kraft type). (40 mm ring width), core tolerance 76,2÷ 76,5 mm max load capacity per shaft 300 kg
2 - Sets of ball friction rings (i.e., one for each rewind shaft) for 152 mm. (6") I.D. core (ring width 40 mm.). (core tolerance 152,4÷ 152,8)
1 - System enabling the use of the lift-out type shaft at the lower rewind station
1 - Pneumatic expanding rewind shaft, lift-out type,for 76 mm. (3”) I.D. core for torque control in rewinding (when performing just winding with trimming only on lower rewinding station
1 - Core positioning system through laser beams (including no. 05 laser beam assemblies to set into position no. 10 cores at rewind).
1 - Electro-mechanical device for the auto push off of the rewound rolls from both rewind shafts with single control, one for both rewind shafts
1 - Set of antistatic bars complete with feeder

The machine will be available on january 2020.