Używana Fleksograficzne maszyny drukarskie do druku etykiet: OMET X-FLEX X6 430 2012

Dane techniczne maszyny używanej OMET X-FLEX X6 430

Ref.: 300041631

Marka: OMET

Rok: 2012

Inne specyfikacje:

designed for the production of :
unsupported film (OPP, BOPP)
shrink film (PET, PVC, OPS)
paper (C1S, C2S, etc)
pressure sensitive paper
PS Film
annealed and raw Aluminium Foil
SBS carton
max speed : 200m/min
max web width : 430mm
max die cutting width : 420mm (16" 1/2)
max die cutting repeat : from 12" to 25 "
substrate thickness range : min 12 micron / up to 250gr/m2
main PLC : Schneider Electric
drivers and motors : Emerson _ Control Techniques

Basic press X-FLEX 430 for the printing of filmic and pressure sensitive stock, complete of:
- Automatic tension unwinder, for rolls up to 1000 mm (40") diameter
with integrated roll pick up from the floor
- Servo driven infeed section, with automatic web tension control
- Servo driven outfeed section with independent motor
- Pair of web break detectors
- High Speed "ROCK ROLL" Stripping section including matrix rewinder, complete with matrix rider roll
- Mounting frame for cross perf/cut cassettes for sheeting
- Mounting preparation for shingling table for sheets delivery
- Single shaft rewinder, with independent motor for constant tension control, for rolls up to 1000 mm (40") diameter
including integrated roll discharge system.
1 Second Rewinding Shaft and Drive
1 Single side Corona Treatment

SERVODRIVEN AND GEARLESS FLEXO PRINTING UNIT

8 SHAFTLESS and GEARLESS Direct Drive flexo printing unit, complete with 3 servo drives for higher printing accuracy and fast registration and set up.
Features:
-Servo Driven Printing Mandrel (for the use of SLEEVES), ultimate in ergonomy during job changeover since it is Toolless
-Sleeve system Plate changeover, to use engraved flexo plates, or one or more seamless sleeves for the higher quality
-360° registration
-Servo Driven Chilled impression cylinder (patented), for perfect temperature control on both web and Plates
-Servo Driven Cross Adjustment, to allow Automatic Registration in both Cross and Web directions
-Easy and Quick change over lnking system, including:
-lightweight interchangeable ink pan
-fountain roll (Gearless) and negative doctor blade assembly
-individual Touch panels at each station. Rubber socket under plastic cover to avoid breakage

1 Rail System for modules movable on rail

UV DRYING SYSTEMS

8 Single lamp UV System GEW E-Brick,- max power 9 KW (500 WPI), including automatic power control, and setting for speed threshold
1 Sealed circuit chilling system for chilled impression drums, including chiller and plumbing for the entire press according to standard lay-out

DIE-CUTTING SYSTEMS

1 Double frame servo driven diecutting station, first slot complete, and prepared for 2nd slot

SLITTING SYSTEMS

1 Pressure cut slitting unit
4 Blade assembly for pressure cut slitting

ELECTRONIC CONTROL SYSTEMS

9 OMET ARCS Automatic register control (for printing and one die cutting unit)
1 Automatic active MD and CD pre-register system "VISION 1"
1 Motorized Video camera
1 Remote access system for Press service and troubleshooting through Internet connection