Używana Linia do wytłaczania taśm (worki tkane): STARLINGER starEX 1500 ES 2010

Dane techniczne maszyny używanej STARLINGER starEX 1500 ES

Ref.: 300042075

Marka: STARLINGER

Rok: 2010

Inne specyfikacje:

Tape Stretching Line starEX 1500 ES

Die width 1800 mm
Operating speed max. 500 m/min
Working width 1650 mm

EXTRUDER Type E 120.33 D TD

Strong ground frame with water cooling devices
High-precision electrical displacement for longitudinal adjustment
Main drive by torque motor with single reduction gearing
Bimetallic barrel with water-cooled feeding zone (temperature controlled via processor control)
Air cooling and heating equipment
Wear resistant feed screw and screw-cylinder

VoluTEC- volumetric granulate feeding and three-component dosing/mixing unit

Automatic filter system with heating elements.

Flat die
Reversible die lip
Die width: 1800 mm
Die lip aperture 0.1-1 mm
Edge trim recycling
Automatic flat die with automatic adjustment of the lips used for processing PP. The complete lip adjusting system is removable.
Only to be used in connection with a scanning gauge and control system for thickness measurement 1500

Water quench with integrated holding unit
Take-off with pneumatically operated nip rollers
Slitting uniy, pneumatically operated, with cross adjustment, blades and spacers for a final tape width of 1,7-5 mm, one complete spare cutting bar, including 430 industrial blades
Two stage drying system
Additional film take-off roller with variable drive and pneumatically operated nip roller, for high cutting tensions

Hot air oven with controlled heating zones
Air flow regulation via smartTRONIC
Upper part to be raised pneumatically in two steps
Length of heating channel 5,8 m

Stretching section with 8 godets (6 hot godets, 2 cool godets) for high speed including protecting cover and hot oil system.

Tape extraction – Vacuum system , designed as start-up aid and broken tape catcher built as an aspiration system mainly consisting of suction nozzles, feed pipes and a collecting box for waste tapes.

Control cabinets
With air conditioning, including the complete wiring within the tape line
Mechanical screw extractor

Winding machine stacoFIL 200 XE with 320 heads
Without balancer
Central system
Control for yarn tension
MSP (multi-stage precision) winding system for perfect unwinding properties

Phase Inverter control for the Drive motor

On/Off switch for each winder head

Yarn tension control by means of strain gauge force sensor.
Quick- clamping device by an expansion spindle. An ergonomically designed brake lever stops the spindle, interrupts the power supply to the drive motor and releases the core when pushed backward. Released forward it expands the spindle, the core is centered and locked and the drive motor restarted.
Yarn catching device on tip of the spindle, allows easy and failsafe string-up at high winding speeds.

High precision traverse mechanism

Supporting Frame for installation in one row with maximum 180 winding heads.

Winding Ratio:
Automatically controlled and adjusted by an electronical mechanism.
Tape material PP/HDPE*
Tape width 1,8*-6 mm
Tape tension control (electronically)
Tape tension range (electronically controlled) 40-500 g
Denier range 400-3000 Den
Tape thickness Min. 25 μm**
Standard tape guide Slot-type
Special tape guide 2.5, 3, 5 mm
Winding speed up to 500 m/min
Traverse length 200 mm
Vertical arrangement 6
Winders / frame 18