Used Pouch making machine: WATERLINE RITEBAG 600-II-Z of 2013

Data Sheet of Used WATERLINE RITEBAG 600-II-Z

Ref.: 300044268

Brand: WATERLINE

Year: 2013

Other Specifications:

Pouch bag making machine able to produce:
-3 Side Seal Pouches from 1 reel with or without zipper
-Chicken bags
-Stand-up Pouches from 1 reel with bottom gusset folded with or without zipper

Film: PA, PET, AL compound with PE or PP
Thickness: 40μ - 250μ
Bag Length (Min-Max): At 2 up 100-260 mm, At 1 up 100-290 mm
Bag Width (Min-Max): 80-400 mm
Gusset Size (Min-Max): 35-100 mm
Max speed: 150 cycle/minute
Max Lane : 2 up

STANDARD EQUIPMENT
Rapid exchange device with powered film unwinding system, gearbox driven, controlled by the film dancer;
Flying bottom punch system for making the bottom gusset holes
Feed systems driven by independent digital servo drives, fully programmable;
Longitudinal sealing and cooling stations driven by independent digital servo drives, fully programmable;
Cross sealing and cooling stations driven by independent digital servo drives, fully programmable;
Pneumatic controlled punching tools manageable by software
K seal Bar
Max Reel Width : 1300 mm
Max Reel Diameter : 1000 mm
Reel Core Shaft : 76 mm
Control System Beckhoff Industrial PC VGA touch screen
K seal Bar
Handle Devices
Bottom and top round corner devices

SEALING SECTION
Longitudinal Zipper Sealing and Cooling Station
Driven by 1 INDEPENDENT DIGITAL SERVO DRIVE, fully programmable
2 longitudinal zipper sealing/cooling twin bars, zipper sealing length 800mm / zipper cooling length 400mm, zipper sealing width 60mm / zipper
2 longitudinal gusset sealing/cooling twin bars, gusset sealing length 800mm / zipper cooling length 400mm, gusset sealing width 100mm / gusset
Upper sealing/cooling bars movable controlled by pneumatic cylinders
Pneumatic sealing/cooling bars blocking system
2 Motorized zipper unwind devices complete of dancer, integrated in machine frame
2 Zipper guides (minimum centre to centre distance is 60mm)
3 Cross Sealing Station

Each station driven by 1 INDEPENDENT DIGITAL SERVO DRIVE, fully programmable
Sealing bar length 680mm (26.7”), width 60mm (2.36”) – 3 zones (upper and lower bars)
Upper sealing bar movable controlled by pneumatic cylinders
2 Cross Cooling Station

Each station driven by 1 INDEPENDENT DIGITAL SERVO DRIVE, fully programmable
Cooling bar length 680mm (26.7”), width 60mm (2.36”)
Upper cooling bar movable controlled by pneumatic cylinders