Used APV GAULIN machines for sale

APV Gaulin Pasteurizer Products: Multivitamins, ICE Tea Brix 8/10 Capacity m3/h: 20.000 lt/h Inlet Temp: ca. 15 ÷23 oC Pasteurizer Temp : 85 - 110 oC; max. 120 oC Type of Pasteurizer: plate Holding time: 30 or 60 s Outlet Temp: depending on the coolant; in our case, the outlet temperature was approx. 15 oC; the coolant approx. 9 oC Working Hours: ca. 10.000

Milk homogenizer APV Gaulin Blue Top Capacity: 8000 /h Max. Pressure: 200B Cooling water: 200 l/h Machine still istalled in the production hall

Homogenizer Manton Gaulin Model M12 Professional, Frame-Up Rebuild Service Included Frame: Stainless Steel Skin over Cast Iron Max Capacity: up to 800 GPH Max Pressure: up to 3000 PSI Max Motor: up to 40HP Valves: Poppet Style Valve Seats: Straight Sided, Shop Replaceable Configuration: 2-Stage Homogenizer, Rexalloy Materials, Manual Actuators

Cheese Milk Pasteuriser, used to produce Cheddar, Gouda and a range of hard cheese. It was initially installed in 1999, and later upgraded and rebuilt in 2006 with new APV N35 Plate Heat Exchanger, to increase the process flow from 23,000 lph to 26,800 lph, so the client could fill there cheese plants in less than one hour. Pumps were all replaced in 2003. The machine is dismantled, and in a container ready for shipment. Includes : - Complete pasteuriser - Flash Vessel / deaerator (1998) - Separator MRP318TGV - Steam to hot water set - Container (it is packed into) Specification: Process Flow 26,842 lph Fat Content Less than 10% Milk Inlet 4 - 10 deg C Pasteurisation Temp 75 deg C Exit Temp Min 30 deg C Equipment Pasteuriser Raw Milk Feed Pump (Inox CS50 175 2) Raw milk & CIP flow plates Variable Speed for raw milk (ABB) Past Balance tank WITH Rosemount level control & Serotech temperature control Water supply valve, drain valve, spray ball valve, change over (Bardiani) Timing Pump (APV W55/60) Variable speed for timing pump (ABB) 2 x Alfa Laval GAFF Filters Plate Heat Exchanger N35 (this was cracked tested 2015) Pasteuriser flow meters ( Rosemount) 2 x Divert Valves ( Bardiani LL Port) Flash Vessel (-14PSI +20 PSI) Feed valves (Keysone) Temperature transmitter (Serotech) Separator Separator MRPX 318 TGV (includes spare NEW motor) Separator constant pressure modulation valve (Alfa Laval) Separator balance tank pump( Wilden M1) Separator pump (Sandpiper) Separator tool set (with base) Steam to Hot water set Manual stem valve (FCX Taylor) Steam pressure gauge (Teltherm) Steam Control valve (Spirax Sarco D65/PN25) Hot water PHE (APV H17) HW circulation pump (Lowera FHE65) HW Balance tank with level and temperature control 2 x hot water control valves (Keystone F990) Steam reduction valve (Spirax Sarco DP17 NB: Separator, HW pump, Timing pump, Pasteuriser feed pump, Raw milk pump and CIP pump were all tested and passed using vibration analysis in Feb 2015 N35 cracked tested by APV Aug 2015 Optional services: 1. Unpack container, reassembly equipment, power up electrical panel, bump-test pumps. Put holding tubes on separate frame. Re-pack container for transport: est. sell = €23.000 2. Fix/repair/replace any faulty parts. Modify control program etc. Cost would be advised upon completion of above. 3. Install system at customer site (this would depend on location). Electrical and mechanical provided same footprint and orientation as in the workshop. Total cost for above €110.000 (which would exclude in any costs getting to the site, accommodation etc.).

Output: 6.000l/h. It includes: - APV homogenizer of 6.000 l/h. - Aseptic tank of 12 tons.