Used ATEM machines for sale


Sorry, this item is currently unavailable: Used ATEM machines for sale.

Which machine are you interested in?

Request machine »


The most popular used machines: Thermoformer, Used Thermoforming & Sheet Machinery

AMUT COMI FFG-760-ADV - MachinePoint

AMUT COMI FFG-760-ADV - 2010

Possibility to form and cut in the same station or in two different ones
Material width 900 mm
Dry Cycles/min: max 60

Leaf inlet preheating on laterals for chains
Robot at end of line with possibility to rotate for a/b trays
Long stacking table for evacuation
Forming closing force kn 300
Cutting press closing force kn 600 ...

W.M. WRAPPING MACHINERY SA FC 780 IM/2 Speedmaster Plus - MachinePoint

W.M. WRAPPING MACHINERY SA FC 780 IM/2 Speedmaster Plus - 2020

Thermoforming machine Vacuum/air pressure forming and incorporate cutting in place by steel rule, with additional cutting press for separate cutting
Max. external tool size mm 780*x570
Max. tool size with pneumatic clamp frame mm 750x570
Platens clamping force of the forming unit kN 750
Platens clamping force of the additional cutting press kN 600
Equipped with:
Automatic sh...

GEISS DU 2400x1200x900 T9 - MachinePoint

GEISS DU 2400x1200x900 T9 - 2011

Max Plate dimensions: 2400x1200
Photo Cell
Siemens Control
No automatic sheet loader
No automatic window frame adjustments option included
Window frame sizes included:
Outside:2120x1160mm
Inside:
1)1210x1010mm
2)910x610mm
3)1480x850mm
4)990x740mm
5)1780x560mm...

KIEFEL KMD85 SP - MachinePoint

KIEFEL KMD85 SP - 2022

For PP cups of 90mm & 95mm diameter (2 moulds negotiable)
Forming area max.: 825 x 675 mm
Forming area min.: 375 x 350 mm
Tool dimensions max.: 850 x 700 mm
Tool dimensions max. (block change) :850 x 700 mm
Height of formed part above / below film level / total 150 / 150 mm
Film width max. (parallel rails): 900 mm
Production speed max. (depending stacking system):45 c/min
P...

KIEFEL KMD 75B - MachinePoint

KIEFEL KMD 75B - 2003

Available at the end of July
Working hours : 69313
Forming area min-max : 380x250 - 750x540mm
Post/neg forming depth : 150mm
Max material width : 800mm
Forming force : 500KN
Cutting force : 800KN
The machine has 3 stations (forming, cutting and upper stacking).
Maximum output: 35 cycles/min...

ATEM Machines sold in the past:


Materials: ABS, PMMA, PE, PP , PET, PS Min depth of draw: 80 mm Max sheet dimensions: 1560 x 1060 mm Speed production: min 6 cycle/h (10 mm) - max 40 cycle/h (1, 4 mm) n. 120 resistences W 650 mm 250x60 (standard) of heating panels n.240 resistences W 325 mm 125x60 (optional) of heating panels hydraulic pump power: 7,5 Kw vacuum tank capacity: 500 l
Standard Speed: CPM 100 Depth of draw: 24” Top 24” Bottom mold, has ability to form both top and bottom. Plastic clamping system: fully adjustable, easily adjusted to any size sheet. Heaters: Infrared ceramic heater panel 30,000 watts with energy saving mode and independent percentage controls Vacuum: 500 Gallon surge tank coupled with an industrial 15 HP high pressure vacuum pump Tooling table Top and Bottom: designed for heavy tools and optimum pressure table offers adjustable clamps for desired tool sizes. Power: three phase 150 amps, 380 volts; it has been upgraded· Tool vacuum box: fitted with vacuum box for demonstration and single part prototyping; the equipment works and can be adapted to your very needs. Recommended for plastics: ABS - PVC: - PETG - HIPS - HDPE – ACRYLIC (Recommended for most thermoplastics up to 1/2 inch) Controllers: Solid state programmable heater percentage control and heat time indicator; it can be operated in semi-automatic mode. Air: requires 90 PSI Includes 15 Horse Power hydraulic pump system with reservoir and 150’ of high pressure lines. Includes 3 phase large outfit chiller with oven chill lines for higher output. This is a great machine for the following industries: Plastic forming companies or Universities Military bases Props and special effects Precast cement Electronics packaging RV components Spa and tub Hobble RC bodies, etc. Upgrades that this machine has: 1. Upper tooling Table: used for deep draw female plugging; offers better distribution of plastic gauges and can be secured vacuum seal on heavy gauges. 2. Separation to eliminate webbing on closely arranged tools 3. Heater controllers: PLC zone control independent percentage controlled, standard controllers are coupled to independent fuses and PID controllers. The design offers complete control high wattage percentage based units; with economy size down switch options for economy mode running.

Do you need advice?


We will guide you through the entire process of buying and selling used machinery in a changing and complex international environment. Our sales, logistics, legal, and marketing teams will accompany you throughout the process to make the operation easy and risk-free.


First and Last Name *
Please input your name
Contact Phone *
Please input your contact number
Company *
Please input your company name
Email address *
Please input a correct email address
City *
Please input your city
Country *
Please input your Country
Comments *
Please input your comments
To continue you must accept Personal Data Processing Policy.