Used BEKUM machines for sale

BEKUM is a manufacturer of extrusion blow molding machinery recognized for the quality of its machines and peripheral equipment. With its production facilities in Berlin, Germany, it is an internationally recognized brand within the extruder industry. Bekum machinery is used for the manufacture of various plastic products using blowing technology: plastic drums, bottles of different sizes for beverages, bottles for water mainly produced by the Bekum BA Series, different polyethylene containers, bottles for cleaning products, bottles for chemical products, industrial drums, bottles for milk, hollow bodies for packaging, car parts. MachinePoint sells used Bekum blowers of the BAE, BM, BA and H series models.

Similar Products:


Accumulation Head Extrusion blow moulding machine AUTOMA AE 20 PC

AUTOMA AE 20 PC

Accumulation Head Extrusion blow moulding machine


2020
Ref: 300044777
AUTOMA
More information
Accumulation Head Extrusion blow moulding machine SIG BLOWTEC KBSH2-60

SIG BLOWTEC KBSH2-60

Accumulation Head Extrusion blow moulding machine


2004
Ref: 300047745
SIG BLOWTEC
More information
Accumulation Head Extrusion blow moulding machine KAUTEX KCC 30 S

KAUTEX KCC 30 S

Accumulation Head Extrusion blow moulding machine


2012
Ref: 300047893
KAUTEX
More information
Accumulation Head Extrusion blow moulding machine KAUTEX KB 15/10-S60/18

KAUTEX KB 15/10-S60/18

Accumulation Head Extrusion blow moulding machine


2014
Ref: 300040528
KAUTEX
More information
Accumulation Head Extrusion blow moulding machine UNILOY UMA 17.70.2

UNILOY UMA 17.70.2

Accumulation Head Extrusion blow moulding machine


1997
Ref: 300041859
UNILOY
More information
Air Compressors (Low Pressure) MATTEI AC30L

MATTEI AC30L

Air Compressors (Low Pressure)


2011
Ref: 300035563
MATTEI
More information
Air Compressors (Low Pressure) INGERSOLLRAND ML15

INGERSOLLRAND ML15

Air Compressors (Low Pressure)


2001
Ref: 300040856
INGERSOLLRAND
More information
Air Compressors (Low Pressure) GARDNER DENVER EAU99S

GARDNER DENVER EAU99S

Air Compressors (Low Pressure)


2008
Ref: 300042655
GARDNER DENVER
More information

BEKUM Machines sold in the past:


Extrusion blow moulding machine BEKUM BM 504 / S 60N - 1998 Included in the offer: -Blow moulding machine -Control unit -Calibration device -Packing table -testing equipment Extruder: Type: S 60N Materials: HMPE, PE, PVC Clamping force: 110 kN screw diameter: 60 mm single head diameter max.: 120mm output capacity: - HDPE: 100kg/h - PVC powder: 95 kg/h - PET/PP: 80 kg/h working hours: less than 3.000h aprox. heating capacity extruder + head max: 24 kW conected load of complete unit max: 81 kW Net weight (without extruder and extrusion head): approx. 5500kg Drive motor hydraulic pump 11 kW Dry cycle time: 2.6 sec Max. number of cycles: 9 1/min Operating pressure cooling water: 4 bar Pneumatic operating pressure: 8-10 bar Recommended pneumatic inlet pressure: max. 12 Screw extension: 1500 mm Screw cooling tube extension: 2500mm New control system including software, electrics etc Extrusion head: Type: BKD 130 Type: BKZ 120.1 Mould: Mould length (high): 340mm min. - 470mm max. Mould width: 420mm Mould thickness: 2 x 130 mm Mould opening: max. 220 mm Mould weight: max. 260kg 5L mould available (ask for the price)
Mould platen sizes (mm) 510x600x400 Opening stroke (mm) 400 / 660 Clamping force 20 Tn Automatic Deflashing unit
Mould platen sizes (mm 715 x757 Opening stroke (mm) 1090 Clamping force 38 Deflashing unit YES
View stripe One extra triple-head centre 100mm available New screen New servo valve for parison New parison filter Mold length: 230 mm Mold width: 340 mm Mold depth: 2x100 mm Daylight: max 200 mm Mold weight: 180 kg Clamping force 60 kN
BEKUM BA14 SINGLE STATION BLOW MOLDER For 20 litres stackable jerrycan, with post-cooling and automatic deflashing -Extruder-size: S901 90mm grooved barrel (HDPE/HMWPE) -Kind of head: BKZ 180 -Programmer: 75 point Bekum on screen parison programmer -Kind of control: BEKUM ISCOS BMC1000 PLC CONTROL -Language: GERMAN -Capacity: up to 20 liter jerrycan - Bottom mold movement ready -Voltage: 380-440V. -Cut and weld with constant and programmable pre-blow -Automatic lubrication system -Photocell system auto-parison adjustment Clamping force: 200 kN Mould length max: 600 mm Mould with max: 510 mm Mould depth: 2 x 200 mm Daylight opening: 260 mm Weight of mould max: 450 kg Dry cycle time 3,5 s Number of cycles: 5/min Max.connected load: 108 kW OVERHAULED IN 2020

Do you need advice?


We will guide you through the entire process of buying and selling used machinery in a changing and complex international environment. Our sales, logistics, legal, and marketing teams will accompany you throughout the process to make the operation easy and risk-free.


First and Last Name *
Please input your name
Contact Phone *
Please input your contact number
Company *
Please input your company name
Email address *
Please input a correct email address
City *
Please input your city
Country *
Please input your Country
Comments *
Please input your comments
To continue you must accept Personal Data Processing Policy.