Used ELWA/GÜNTER machines for sale

Hallo Herr Castellanos, Mactec: Gebrauchte ELWA EL-B-GR 1300-S - YouTube vielen Dank für Ihre eMail. Wir haben tatsächlich eine Gebrauchtmaschine, die zum Verkauf steht. Gerne können Sie diese mit anbieten: Gebrauchte ELWA EL-B-GR 1300-S • Bodennahtmaschine, genadelt • Baujahr: 1992 • Nutzbreite: 1250 mm • Funktionsfähig • Mit Baumüller Servomotoren • Max. Taktzahl: 220/ Min. • Max. Foliendurchlauf: 100m/ Min. • Integrierte Kronen-Lochstanzeinheit (8 Stk.) • Blockschweißung und Perforationsleiste • Außenmaße (LxB) ca.: 7x2,2 m • Maschine steht zum Verkauf oder zur Vermietung Link zu Video. Bilder finden Sie im Anhang. Die Maschine kann nach Absprache bei uns vor Ort besichtigt und getestet werden. Wir wollen 20.000€ dafür haben. Mit freundlichen Grüßen/ warm regards, Patrick Rumes B.Eng. (FH), MBA Leitung Marketing, Vertrieb Maschinenbau GmbH Platanen Str. 10 D-09356 St.Egidien/ Lichtenstein Tel. +49 (0) 152 337 2324 0 Fax. +49 (0) 37204 503-213 Email: patrick.rumes@mactec-maschinenbau.de Website: www.mactec-maschinenbau.de

Working hours : 35.000 Material : LDPE-MDPE-HDPE Film width up to 1550mm Bag length min max : 250-3000mm Film thickness min-max : 30-200 microns Side gusseting - depth : 700mm Output : 180 cycles/min Film speed : up to 120m/min Motorized unwinder Mother roll diameter : 1000mm Available in February 2023

Bag length with punched and perforated bridge Whitout Block: 200 - 1.500 mm. Whith Block: 250 - 1.500 mm. Material thickness: LDPE from 2 x 0,02 up to 0,2 HDPE from 2 x 0,006 up to 0,05 Unwinder width max. 1300 mm Roll diam. max. 1000 mm Web guide unit Photocell for printing material

Machine for the manufacture of : Flat bags Bundling with preselection of the number of bags per package Bags made from PE film With continuously heated sealing bars, control of the sealing gap, high output, flying knife, clean cut, fully automatic folding table, easy and user-friendly format adjustment. Formats from 100mm width Working width in 1 lane max : 1520mm Working width in 2 lanes max : 720mm Working width in 3 lanes max: 470mm Bag length : 260 to 3000mm With crown perforation: 330 to 2400mm Pack thickness (needle height) max: 10mm Max bindings : 4x25 microns Max speed (without film) : 220 strokes/min Speed according to sealing time : 20 to 150 strokes/min Max speed : 150m/min Thicknesses of the processed films : HPDE : 2x8 - 4x40 microns LDPE : 2x20 - 4x180 microns (The max thickness of 4x200 microns reduces the speed) The pre-cut is about 33mm from the cut. The remaining opening for the needles is then 6mm from the opening of the bag. In the standard version, up to 6 C-shaped bundling tools can be installed. Depending on the product, it is possible to pre-cut packages up to 5mm thick and to make a hanging hole. The standard ELWA unwinder, not motorized, accepts film rolls up to 800mm diameter. It is possible to work reasonably with the machine at a low speed of 120m/min, when using standard unwind shafts, with disc brake. At speeds higher than 120m/min, it is not possible to directly control the unwinding with this type of brake, in the case of very wide and/or large diameter rolls. In this case, it is advisable to use an additional tangential unwinding device that brakes or accelerates the reel. Gusseter and motorized unwinder not included

High production, reliability and low set-up times lead to increased efficiency. Constantly heated sealing bars, flying knife, double folding with automatic positioning plus electronic sealing control ensures adjustment for very thin, thick or difficult material which can be sealed at a high output rate. Working width 1550 mm Bag length: minimum 200mm maximum 2500 mm Film thickness minimum 2 x 8 μm HDPE maximum 4 x 150 μm LDPE Folding station 1 and 2 Spare parts: complete electronics servo motor +servo converter for feeding film servo motor +servo converter for welding servo motor +servo converter for foil removal operator panel PLC systems flying knife cooling bar aluminium cylinders with bearings Machine was refurbished 05/2020 New set linear bearings for welding + exact setting New set articulated eye bearing M12 and M16 + exact setting Complete knife belt with knife holder Guide sheets for cutting New cardan for cutting Cooling bar New bearings for aluminium cylinders New display for folding 2 Documentation: English or German