LUNG MENG - TRP-400
T-Shirt bags on the roll. In the actual configuration the machine can produce: two fixed bag lengths: 450 mm or 490 mm one fixed bag width: 220 mm Printer: 1 colour....
2010 | 300043470 | LUNG MENG
More information
Used LUNG MENG machines for sale
Lung Meng Machinery is also known as Dragon Plastic Machinery and was established in 1976 as a professional manufacturer of plastic converting machinery. It has 4 main lines of activity which are divided into: extrusion, printing, recycling and film converting. In 1983 the company developed a system known as "all in line" that allows to integrate three types of machines in a single in-line process, differentiating itself remarkably within the market.
More information
LUNG MENG - LM-65T
Mono extrusion lines. Thickness range:20-150 micron Capacity (Kg/h) 90Kg/h at 50 micron Dosing system - Vacuum pump x1 Rotary die head Die diameter 160mm Gap 1.8 IBC no Double lip short neck ring type Thickness measuring system: No Type of calibration basket - manual Guss...
2006 | 300045075 | LUNG MENG
More information
LUNG MENG - CFP-2080
Flexo printing machines in line. Max. printing speed: 100 m/min. Doctor blade system Printing cylinders: 300x2 350x2 500x2 550x2...
2007 | 300044497 | LUNG MENG
Sold
More information
LUNG-MENG Machines sold in the past:
Screws 55/25/42/25/55 mm
Manual screen changer
Thickness range:20-200 my
One dosing unit for each extruder
Die head with IBC, die plate 200 mm
Die lip gap: 2.5-3.25 mm
Calibrating basket with motorized adjusting in diameter and height
Web guiding system:
Double rewinder, diam max reel 1000 mm
Screws diam 45/25/75/25/50
Manual screen changers
Thickness range 20-200 my
Dosing units no available
Die head with IBC, die plate 250 mm
Motorized adjusting of calibrating basket in diameter and height
Web guiding system
Double rewinder, diam max reels 1200 mm
Screws diameter 55/90/55
Gravimetric Doteco with 04 components on each extruder
Manual screen changer
5 heating zones per extruder
Die head with IBC, die plate 250 mm
Die lip gap 2.5-3 mm
Calibrating basket: with motorized adjusting in diameter and height
Web guiding system
Doble rewinder Final roll diameter: 800 mm
Thickness range: 20-200 my
Working hours: 70.000-75.000 h
Complete line: TAD-700,TA-800CS,TAK-800A
TAI-800A (Unwinder) + TA-800C (Sealing and Perforating Unit) + TAD-450 (Rewinder)
Material: original, LDPE, LLDPE, HDPE, recycled material
Max Bag width: 700mm, Min Bag width: 300mm
Thickness range: 4x5 microns-4x50 microns
Max Speed: 150m/min, Stable speed: 55m/min
Unwinder type: TAK-800A
Mother roll width: 340x2 or 800x1 mm
Hydraulic unwind shaft
Mother roll diameter: 1000mm
Web guide
Longitudional sealing bar
Number lanes 1 or 2
No Photoelectric control
Bottom sealing bar
Control Panel HITECH
Electrical requirement: 3x32A
Welded Patch Application
The machine is correct state. Many parts are replaced. The main servomotor and servo controller has been replaced for 6 month ago by a new ones.
Working hours : 50.000-55.000 h
Complete line: TAD-700,TA-800C,SSB-1300A,TAI-1300C
TAI-1300C (Unwinder) + SSB-1300 (Hot Slitting + Post Gusset Unit) + TA-800C (Sealing and Perforating Unit) + TAF-1400-2N (Folding Unit) + TAD-700 (Rewinder)
Material: original, LDPE, LLDPE, HDPE, recycled material
Max Bag width: 1250mm, Min Bag width: 400mm
Thickness range: 4x5 microns-4x30 microns
Max Speed: 150m/min, Stable speed: 55m/min
Pneumatic unwind shaft
Mother roll diameter: 1000mm
Web guide
Longitudinal sealing bar
No Photoelectric control
Bottom sealing bar
Control Panel HITECH
Electrical requirement: 3x32A
Welded Patch Application
The machine is correct state. Many parts are replaced. The main servomotor and servo controller has been replaced for 6 month ago by a new ones.