Used POLYSTAR machines for sale

Very low mileage, used only for tests. Control cabinet Feeder with metal detector Double degassing Agglomerator Cooling station Pumps Vibrating tank Centrifuge dryer Silos 1000 kg

Degassing: Double Vacuum degassing Screen changer before degassing: Double cylinder type Material feeding system: Conveyor belt Sesotec metal detector Extruder hopper type: Agglomerator/Cutter Compactor – Extruder combination Pelletising system: Hot Granulation on Die – Water Circle system Attachments and accessories: Water bath Water pump Centrifuge Dryer Big Silo (1 Ton)

Conveyor belt Metal detector (S+S) Cutter compactor shredder Extruder Single vented degassing with two stage type (mother-baby extruder) for even better degassing Pelletizing unit Water cooling Centrifuge dryer for drying Spares PP and HDPE/LDPE Die. 1 of each. Spare screw Cutting arm (two blade holder) The machine runs on a three blade right now 12/72 Holland weave mild steel filter discs Cutting blades (originals x 200) 3 - 4 sets of Cutter/compactor blades Control switches The machine even got a new screw installed late 2022.

Conveying Unit Feeding band: 4000 X 800 mm Driving motor: 1 HP X 6P Automatic feeding controlled by ammeter Cutting Compactor Drum Drum diam.: 900 mm Driving motor. 100 HP X 4P Cooling blower: 1/4 HP X 2 sets, with water cooling device Rotary cutter: 6 pcs (on rotary bar) Stationary cutter: 12 pcs (inside the drum wall) Extrusion Unit (with water cooling device on feed hopper) Screw: Ø 120 mm; L/D ratio 36/1, Material: SACM-645 nitride treatment, surface polished Barrel (Double Vented for de-gassing) Material: SACM-645 nitride treatment, honed polished Barrel temperature control: 6 zones Barrel cooling blower: 1/4 HP x 6 sets Main driving motor: 125 HP AC +inverter control (Siemens) Gear Box: Made with FC25, with lubrication and cooling system Gear Material: SCM-21 carbon treat & gear face ground Filtration Unit Screen changer: Automatic hydraulic slide type with power pack, non-stop operation with “Dynisco” pressure gauge Hydraulic motor: 7.5 HP Screen filter Ø 220 MM Heating capacity 10.7 kw Pelletizing Unit (Die face cutting) Die face cutting motor: 3HP x 4P with inverter control Die Heating capacity: 5 kw Die: Ø 2.8 x 100 holes for PE x 1 set, Ø 2.5 x 80 holes for PP x 1 set Cutting blades: 1-4 pieces Pellet Cooling & Conveying Unit Water jacket: SUS304 stainless steel, 5 HP water cooling pump for water circulation Water trough: SUS304 stainless steel Vibration motor: 1/2 HP x 4P x 2 sets Blowing motor for conveying plastic pellets: 5 HP Conveying capacity: 600 Kg/Hr Storage tank capacity: 1000 Kg Control Panel With digital displaying temperature controller, A-meter, push button, magnetic contactor, spring type T/C wire for temperature sensing. Socket type on die & adaptor heaters