Used Metallizer: GALILEO MEGA 2010 of 2007
Similar Products:
GENERAL VACUUM EQUIPMENT V-MET/2 1650-1-100
- Metallizer
Year: 1999
Web Width: 1650 mm
Material Type: BOPP PET, CPP, LDPE, NYLON, UPVC
TOP MET 2450 C
- Metallizer
Year: 1996
Web Width: 2470 mm
Material Type: PET, OPP, LDPE/CPP
GENERAL VACUUM EQUIPMENT EHF4 2450
- Metallizer
Year: 2001
Web Width: 2450 mm
Material Type: BOPP PET, CPP, LDPE, NYLON, UPVC
LAEM TR 550.10.M
- Independent Rewind Stations Film Slitter-Rewinder
Year: 2001
Working Width: 1700 mm
Materials: OPP
Parent Roll Diameter: 1800 mm
LAEM DV 301/1000
- Independent Rewind Stations Film Slitter-Rewinder
Year: 1993
Working Width: 2700 mm
Parent Roll Diameter: 1000 mm
ATLAS CW 800
- Independent Rewind Stations Film Slitter-Rewinder
Year: 2003
Working Width: 2500 mm
Materials: Metalised Pet/Bopp
Parent Roll Diameter: 1200 mm
FAS QB1100X1 // SP500 // TU220
- Bottom weld bags on the roll
Year: 2017
Welding Width: 1100 mm
Bag Length (Max): 20000 mm
Bag Length (Min): 540 mm
DCM Panthère S
- Double-shaft film slitter-rewinders
Year: 2000
Working Width: 1600 mm
Materials: OPA/PE, OPA/PE, PET/PE, PET/MET-PE, APET/PE, PVC/PE, PA/PE, PE
Parent Roll Diameter: 1100 mm
Data Sheet of Used GALILEO MEGA 2010
Ref.: 300040772
Brand: GALILEO
Year: 2007
Other Specifications:
Materials
Polyester (PET) 6-60 p
Oriented Polypropylene (OPP) 12-100 p
PVC 20-80 p
Low-density polyethylene (LDPE) High-density polyethylene (HDPE) 25-100 p , 25-100 L.,
CPP 20-80 p
Reels Dimensions
Max. film width:2020 mm
Max. metallising width:2000 mm
Min. metallising width: 1000 mm
Max. diameter:1000 mm
Internal core diameter:152 mm
Evaporation
Deposited material:aluminium
Recommended degree of purity:99,8%
Diameter of the aluminium wire:1,6 mm
Boats number: 23
Boats dimensions: 120x35x10 mm
Boats material:intermetallic sintered
Evaporation rate per source:10 g/min
Max . range of thickness deposited:0,8 - 10 STD
Winding system
Maximum speed: 840 m/min
Minimum speed: 90 m/min
Tension range:3.5-65 kg
Acceleration and deceleration time at max. speed:30 - 60 s
Process drum diameter:500 mm
Pumping system
No. 2 Diffusion pumps - 50000 I/sec No. 1 Roots pump - 13000 m3/h
No. 1 Roots pump - 2400 m3/h
No. 1 Roots pump - 2400 m3/h
No. 1 Cryogenic panel - 200.000 I/sec No. 2 Rotary piston pumps - 505 m3/h
No. 1 Polycold 1100'
No.1 Rotary piston pump - 505 m3/h
Electrical feeding
Tension (+6-10%) as requested
Frequency (±4%) by the Customer
Phase: 3
Wires: 3 + ground
Max. absorbed power (approx.) : 340 kW
Cooling water
Flow rate (approx.) : 600I/min
Inlet temperature: 18+25 °C
Inlet pressure (for free outlet): 3 kg/cm2
Max. heat load to remove: 290 kW
Typical water specifications
Water hardness: 6-8 °D
CO2 content: max 15 mg/I
CI content:max 20 mg/I
Particle size: max 100 p
Particle concentration: max 10 part./cm3
Ph:6,9-8,2
Conductivity: max. 500 pS/cm
Compressed air
Pressure:6-7 kg/cm2
Consumption (average): 0,7 Nm3/h
Peak consumption:50 Ndm3/s
Specifications
Dew point at working pressure: +2 °C
Particle concentration:max 5 mg/m3
Particle dimensions: max 5 p
Oil content:max 5 mg/m3
DIMENSIONS (INCLUDING ELECTRICAL CABINET
Width :9m
Length (with opened carriages): 18.5 m
Height: 3,6 m
Approx. Weight : 40 t
Min. room temperature : 15 °C (70% RH)
Max. room temperature: 35 °C (60% RH)