Used 10 Colours CI Flexo Printing Machines: COMEXI FW2110 of 2008

Data Sheet of Used COMEXI FW2110

Ref.: 300041477

Brand: COMEXI

Year: 2008

Other Specifications:

Running even at 350 m/min running speed

Suitable for printing:
LDPE 20 - 150 microns
LLDPE 12 - 100 microns
HDPE 10 - 150 microns
BOPP 10 - 60 microns
PET 8 - 50 microns
OPA 15 - 50 microns
CAST PP 20 - 70 microns
Laminates up to 150 microns
Paper 40-100 gsm

Thickness of printing plates and of adhesive for the plate
1.14 mm & 0.5 mm
Central drum diam. 2118 mm
Drying system type: Electrical contractor logic
Mechanical speed: 400 m/min

Unwinder Turret
Max Reel Diameter 1000 mm
Air Shaft 76 mm & 152 mm
Tension control - Motorized
Minimum reel diameter: 500 mm

Rewinder Turret
Max Reel Diameter 1000 mm.
Air Shaft 76 mm & 152 mm
Tension control - Motorized

Tension range:
- Minimum: 20 N
- Maximum: 500 N

Edge guiding system before printing section FIFE
Edge guiding system before rewinding section FIFE
Corona treater: IEEC

Doctor blades 10 Nos + 04 Extra
Ink pumps x 16 Nos, Pneumatic
Viscosimeters x 10
Availability of self- cleaning system

SINGLE PUMP AUTOMATIC WASH
UP - EXCITINK MODEL
Manufactured by ENVIROXI, member of the COMEXI GROUP

AUTOMATIC PRESSURE
CONTROL SYSTEM
Automatic pressure setting (PRESCO + ACONPRO) through video
camera, at the start of each job.

Availability of thermostat for CI

VIDEO - AVT PRINT VISION PRELUDE
One AVT video equipment, PRINT VISION PRELUDE model, for
printing control and inspection.
Supplied with:
- Automatic register setting of all colours at job start, through
the video camera.
- CCD camera with 16 X zoom.
- Interface module.
- Control panel.
- One Monitor, showing the printing image

Length register Automatic
Side register By synchronous motors. Remote controlled, including one set of push-buttons on the printing stations and one set on web viewing end.
The register positions can be memorized for repeat jobs.
Adjustment: +/-7.5 mm.

Availability of pre- register
Computerized setting of print decks

Autoregistration is not functy properly, hence our operators register manually and it holds. We have been working like this for some few years.
AVT available on this machine is old version and is just an a web camera. The operator has to see the photos and detect defect.

The following parameters are introduced through the touch-screen
at the start of the order:
- Print decks selection.
- Print repeat.
- Web thickness.
The computer calculates theoretical coordinates for each
micrometric shaft. If it is a repeated job, the computer recalls
memorized coordinates.
Racking and adjustments of print stations are made through high
precision ball feeding screws and motors, with closed loop refeeding.
One multiturn absolute encoder directly fitted to the screw
ensures position control.
Print adjustments are independent on each deck and are carried
out by means of:
- Two portable consoles placed on printing stations.
- One console placed in viewing area.
- The command impulse is 0.005 mm.
The system features automatic pressure increase when the press
speed goes up. The operator can reprogram parameters if
required.
Availability of refrigerating unit for cooling cylinder

Additional accesories and spare parts:
Plate Mounting Machine

Type of Anilox Core : Carbon fiber.
Anilox Core Diameter : 156.088 mm
Anilox Sleeve Outer Diameter : 178.253 mm.

LPCM
400x2
160x1
360x3
340x1
280x1
250x1
180x1
320x1
160x1

Sleeves
Type of Sleeve Core : Carbon core
Sleeve Core Diameter : 143.42 mm
Quantity : 220 (10 Nos X 22 Sets)
396 mm, 415 mm , 420 mm ,450 mm , 460mm, 480 mm , 490 mm , 500 mm , 510 mm , 520 mm, 540 mm , 560 mm , 570mm , 580mm , 600mm,625 mm , 640 mm, 660 mm, 670 mm, 690 mm ,700 mm & 740 mm

Installed power ATEX 100
Control Voltage: 230/24 V, Cable: 2*3*150 Sq mm+GND
Siemens PLC on Profibus