Used Label flexo printing machines: OMET X-FLEX X6 430 of 2012

Data Sheet of Used OMET X-FLEX X6 430

Ref.: 300041632

Brand: OMET

Year: 2012

Other Specifications:

designed for the production of :
unsupported film (OPP, BOPP)
shrink film (PET, PVC, OPS)
paper (C1S, C2S, etc)
pressure sensitive paper
PS Film
annealed and raw Aluminium Foil
SBS carton
PE coated and L-Board
max speed : 200m/min
max web width : 430mm
max die cutting width : 420mm (16" 1/2)
max die cutting repeat : from 12" to 25 "
substrate thickness range : min 12 micron / up to 250gr/m2
main PLC : Schneider Electric
drivers and motors : Emerson _ Control Techniques

Basic press X-FLEX 430 for the printing of filmic and pressure sensitive stock, stock, complete of:
- Automatic tension unwinder, for rolls up to 1000 mm (40") diameter
with integrated roll pick up from the floor
- Servo driven infeed section, with automatic web tension control,
- High Speed "ROCK ROLL" Stripping section including matrix rewinder, complete with matrix rider roll,
- Servo driven outfeed section with independent motor
- Mounting frame for slitting systems
- Mounting frame for cross pert/cut cassettes for sheeting
- Mounting preparation for shingling table for sheets delivery
- Pair of web break detectors
- Single shaft rewinder, with independent motor for constant tension control, for rolls up to 1000 mm (40") diameter, including integrated roll discharge system.
- Operator Interface, through touch screen panel
1 Second Rewinding Shaft and Drive
1 Single side Corona Treatment

SERVODRIVEN AND GEARLESS FLEXO PRINTING UNIT

10 SHAFTLESS and GEARLESS Direct Drive flexo printing unit, complete with 3 servo drives for higher printing accuracy and fast registration and set up.
Features:
- Servo Driven Printing Mandrel (for the use of SLEEVES), ultimate in ergonomy during job changeover since it is Toolless
- Sleeve system Plate changeover, to use engraved flexo plates, or one or more seamless sleeves for the higher quality
- 360° registration
- Servo Driven Chilled impression cylinder (patented), for perfect temperature control on both web and Plates
- Servo Driven Cross Adjustment, to allow Automatic Registration in both Cross and Web directions
- Easy and Quick change over Inking system, including:
- lightweight interchangeable ink pan
- fountain roll (Gearless) and negative doctor blade assembly
- individual Touch panels at each station. Rubber socket under plastic cover to avoid breakage

UV DRYING SYSTEMS

10 Single lamp GEW E-Brick UV System,- max power 9 KW (500 WPI)
including automatic power control, and setting for speed threshold

1 Sealed circuit chilling system for chilled impression drums,
including chiller and plumbing for the entire press according to standard lay-out

MOVABLE UNITS FOR FINISHING, MOUNTED ON OVERHEAD RAIL

10 Rail system, to install movable printing/finishing modules
1 Delam/Relam system, sliding on rail
1 Web turning bar, sliding on rail
1 Movable Cold foil unit, sliding on rail system, to allow overprinting (can be used also as UV laminating Tower)

ROTARY DIE-CUTTING

1 Double frame, Servo Driven die cutting station, with one complete
die-cutting slot, and prepared for the second slot
1 Second servo driven die-cutting slot

SLITTING SYSTEMS

1 Pressure cut slitting unit
4 Blade assembly for pressure cut slitting

SHINGLING DELIVERY-SHEETER

1 Complete Cassette-style die cutting station, suitable for die cutting
perforation (3rd Station) can be moved from one press to the other!

1 Vacuum assisted shingling delivery
1 Servo driven matrix pull rolls
1 Gap Master system

ELECTRONIC CONTROL SYSTEMS

13 OMET ARCS Automatic register control for PRINTING and CONVERTING systems

Features:
Automatic Longitudinal Pre-register
Automatic Transverse Pre-register
Insetting (2nd pass) capability
Front and Reverse printing automatic registration

Possibility to control "GATE" system, in order to place register mark inside the printing artwork

1 Motorized Video camera, with possibility to synchronise IMPERIAL and METRIC printing repeats
1 Full Automatic Active Machine and Cross Direction Register system "VISION 1", for the automatic registration of your job, independently form operator's skill!
1 Remote access system for Press service and troubleshooting through Internet connection
1 OmetChannel
1 Anilox Cleaning System for the cleaning of two rolls at the time
1 Plate mounting system with double Camera